If the video was helpful leave a like. If you have any questions leave a comment. Check the description above for part numbers, and a link on how to install a high-pressure fuel pump, follower, and cam sensor on a Ecotec engine. Thanks For watching.
@shawnmckee14
14 күн бұрын
I’ve been reading up on these ecotec 2.4L. I have one with 170,000 miles and the timing has never been changed. I popped the valve cover and it has a tiny bit of slack but nothing crazy. Should these be super tight? I swear I hear a rattle from the timing when starting if it’s been sitting for a long time. Since the top guide bolt that is under the plug is known for being worn down from a broken guide, is it worth taking the plug off to take a look? Would love to replace the timing just worried about timing it back up. Might just go ahead and do it after watching the video.
@MrCuervo22779
10 ай бұрын
Incredibly informative without the bullshit, thank you for your time and effort on this video. You got a sub, sir.
@hp_outdoors
10 ай бұрын
I Appreciate it. Thanks for watching
@nonnywolfe3880
6 ай бұрын
I'll second this gentleman comment, you sir have gotten my sub, thankyou.
@jacobeigenheer3585
3 ай бұрын
I've done a few timing chain/belts and even if I think I know how to do it I watch a couple videos incase I'm missing something or for any tips. This was the first video I clicked for an Equinox and you sir are amazing! By far the best repair video I've ever watched! IDK what other videos you do but I liked and subscribed.
@hp_outdoors
Ай бұрын
Glad to help
@floridaDad1
6 ай бұрын
This is one of the best videos showing cam and balance chain replacement. You are an excellent teacher, and your breakdown of using a degree chart is a game changer. Thank you for the torque specs also. Keep up with the videos. This one is gold.
@hp_outdoors
5 ай бұрын
Wow, thanks!
@psychosis9282
9 ай бұрын
10 out of 10 best video of seen for a timing chain replacement so far, very in detail much love man keep up the wrenchin
@hp_outdoors
9 ай бұрын
Much appreciated!
@EdwardHapstak
5 ай бұрын
Great video so helpful, laying the assembly out on the bench👍 camera angles, lighting, hi-speed parts👍 "timing" of of your explanations, adding the torque specs, & adding #s & arrows👊. Thank you for putting in the work
@hp_outdoors
5 ай бұрын
Awesome, thank you!
@jd4991
Ай бұрын
Did it bend the valves ?
@JoeBribem
27 күн бұрын
My 2.2L Ecotec jumped 4 teeth on each non VVT cam sprocket. It still ran fine (noisy) to park it in my shop. I'm thinking I can target the crank @ 12 o'clock like it's supposed to, then remove the timing chain and rotate the cam sprockets back to 10 o'clock on the exhaust and 2 o'clock on the intake and be exactly where I need to be. Tell me if you think I'm going to be ok with that logic? I'm 2 days away from my Cloyes kit arriving, could really use the nod of approval. My upper guide got chewed up by a slack chain just like yours, I believe the tensioner failed and caused it. Chevy has redesigned them 2 times now after the first abomination was installed at the factory. Thank you in advance.
@cjbillingsley648
6 күн бұрын
How did that work out? My 2.4 did the same thing. Waiting on my kit to get here Friday
@ColinThomas-qz8ox
8 ай бұрын
Man your a natural teacher.really interesting to watch and listen to.very informative.thanks alot for doing this!
@hp_outdoors
8 ай бұрын
I appreciate that!
@KnowyourGadgets
11 ай бұрын
One excellently done video. I really needed this. Thank you.
@stevea7755
10 ай бұрын
How many shop hours can one expect to pay for installation of timing chain /gearset /water pump
@hp_outdoors
10 ай бұрын
Not sure. Didn't keep up with the hours, mostly wrenched on it when I came home from work.
@hp_outdoors
10 ай бұрын
Glad it was helpful. Thanks For Watching.
@craigschell9255
3 ай бұрын
Absolutely explained EVERYTHING I needed to know it a very excellent way. Thank you!
@mikethepainter
26 күн бұрын
too bad you didnt do the Rings. The rings go out on these too. My daughter needs the rings done. I will replace the pistons as well. But need to pull the head. Then I figured I would do the timing chain. Truck will be all new then.
@jasonbordeaux8755
5 ай бұрын
I want your personal phone number. You are absolutely amazing. No bullshit. That was the most educational video. I didn’t want to skip. I didn’t wanna change the video. I watched it all the way to the end dude please don’t stop making these videos. You’re a lifesaver you literally just explained everything that I’ve been trying to get a technician to teach me for about three or four months now absolutely amazing, thank you I can’t say that enough
@Adav1420
6 ай бұрын
How does every video i watch everyone has so much slack to reinstall the chain and i cant get mine over the last sprocket. What am i doing wrong?
@hp_outdoors
6 ай бұрын
Not for sure if you can put the chain on the cam sprocket without it being un-bolted from the end of the cam. Usually have to hold on to the cam sprocket and push the teeth up into the chain & line up timing mark, then bolt it to the cam. Unless the chain maybe too short, count the links on the old one, and see if it's the same as the new chain.
@justinsolomon6972
9 күн бұрын
Thanks for this information. Good description and shows the important things.
@Drityfro09
Ай бұрын
Hello, why didn’t you replace the intake and exhaust sprockets? Is it a simple replacement? Or is another/different balance needed?
@Barncat01
15 күн бұрын
That's a relief! I thought I was gonna have to pull the engine to do this job. Kinda nervous about it lol
@brandonschneider2649
4 күн бұрын
Is it required to replace the sockets?
@herbbedford
10 ай бұрын
Didn’t you say this was an LEA engine? If so aren’t you supposed to put your cam arrows at 10:00 and 7:00?
@hp_outdoors
10 ай бұрын
10 (Intake) and 7 (Exhaust) o clock is the camshaft end notch position, not the timing arrows on the phaser sprocket. If you're installing a camshaft or had a new/reman engine without timing components or sprockets, you would set/check the cams position by the notch on the end of the cam.
@TheDestroyer1250
Ай бұрын
Trying to troubleshoot a 2012 2.4L Equinox. Wondering if it is the timing chain stretched and jumped a tooth or something else. Only codes that appear are o2 censor running lean and that appears randomly then disappears. Vehicle starts as normal but will sometimes sputter between 750-2000rpm and engine will sometimes die. Vehicle restarts without trouble. Random and unpredictable misfire occurs. Gas pedal becomes unresponsive while engine is fighting to stay running. Issue seems to lighten up and or disappear after motor has ran for 10-15 minutes. New air filter, cleaned MAF Sensor, Cleaned throttle body, cleaned PCV port in intake manifold, Intake and Exhaust camshaft solenoids replaced, plugs pulled and replaced, new O2 sensors. 95k miles on motor, and 500 miles on new oil change.
@thermoid1
Ай бұрын
Thank you for posting this! I found this video very helpful in a lot of ways. Ive never attempted a timing chain replacement because of the fear I might get everything out of alignment so this helps but I have a question. Do I or should I drain the oil before opening up the timing chain cover and should I remove the head to check the valves for damage as well?
@richarddiaz8248
4 ай бұрын
Love the way you installed this kit
@hp_outdoors
4 ай бұрын
Thanks
@bernardbutler9852
2 ай бұрын
How much something like this would cost to fix
@hp_outdoors
Ай бұрын
It varies depending on were parts are purchased, what all parts are being replaced, and brands. Also if a shop is involved or its DIY job.
@robertovilla5079
7 ай бұрын
Where did you buy the timming kit?
@hp_outdoors
7 ай бұрын
All the parts for the timing chain and fuel pump install came from Rock Auto. First time I ever used them and will use them again they beat everyone's price. Only problem is they don't move parts from one warehouse to another warehouse and then box them at the warehouse closest to you. If you order 4 parts that are in 4 different warehouses, then you pay 4 shipping charges, because they ship out from those individual warehouses. Luckily all the parts I ordered were at and shipped from one warehouse.
@Arturo8118
9 ай бұрын
Jestem w trakcie skladania silnika i potrzenuje rady jak ustawic kola zmiennych faz rozrzadu , naciagac je czy poprostu ustawic rozrząd?
@raidershydraulics6048
4 ай бұрын
Hello there I have this problem rebuilt the engine 2013 2.4 . And know every time I startthe car a winding noise coming from the timing chain area . Pulled off the oil pump cover replace the timing, chain and gauge again still making the same whiny noise.
@hp_outdoors
4 ай бұрын
If it does it on start up and not all the time it could be the phaser sprockets. They can get very noisy.
@jakal172
6 ай бұрын
Now I gotta fix this pos my wife had to buy. I hope when I take the head off it's all bad. So this pos vehicle goes. I already told her if I have to replace motor it's done and I am not doing it. To never ever speak of buying another American vehicle ever. They are all trash. Idc what you own. If it's America car it's trash. Meanwhile my Honda Element that we let sit for almost two 2years in yard. Put battery in it fired right up. SMH trash American vehicles this coming from a tech.
@hp_outdoors
6 ай бұрын
This is not the best timing chain setup or design for sure. I wish it would have just had a timing belt.
@riverbottomband
5 ай бұрын
My daughters car is a 2010 2.4 Equinox. It died on the highway. I had it towed home and took the valve cover off and the bolt that holds the intake phaser sprocketvon the cam broke. I guess i would have to remove the cam and takevit somewherevto have the bolt removed...i did notice the sensors had heavy crud on the screen. Did that cause this? Is it worth fixing or should i junk it? Thank you for you video. It helped me a lot.
@hp_outdoors
5 ай бұрын
You could try drilling with a left hand bit in the center of the bolt and use an ease out, if you can get to it with a drill. If the threads weren't damaged when the bolt came loose or broke, the rest of the bolt should unscrew out. If the threads were damaged and the ease out won't get it, then the cam will have to be removed, and taken somewhere to be repaired. Could get a new or used cam. Could also get a good salvage motor and take parts from it and use on your current one. Have to pull the timing cover to see what's all damaged down in there and see if there was any valve to piston contact to know if it's worth fixing.
@mrxfiles35
4 ай бұрын
Hello guy, I'm going to look at a 2011 one with the same issue but what's the approximate price to replace the set up?
@hp_outdoors
4 ай бұрын
Really depends were your getting parts and what all needs to be replaced. Prices vary. Cheapest route would be replace chain and guides only, or get the master kit that has all timing components, water pump, VVT solenoids, Phasers, accessory belt and tensioner. Don't know labor cost.
@Josh-lj7ul
4 ай бұрын
my p0010 code popped up on a pontiac g6 2.4 ecotec i’m hoping it’s the wiring i don’t feel like having to change the timing chain in my apartment parking lot atleast not just yet
@hp_outdoors
4 ай бұрын
Could be a wiring problem or a bad VVT controller there on top of the head side by side. This vehicle had one go bad around 60K, replaced with a new one and code cleared.
@tienduong3454
9 ай бұрын
After I replaced the Timing Chain Kit for My Chevrolet Equinox. Then, It appeared "Engine light" is on . Is it true that they messed up something in my car ? Now they diagnosed, the codes are below: P0014 Exhaust Camshaft Position System Performance P0137 HO2S Circuit Low Voltage Sensor 2 The machanic told me If I don't fix, The car will consume more gas. My questions: 1)If I don't fix them, Will there be any damage to other parts of the car ? 2) How long can I drive before I can afford to fix them? 3) what are the costs to fix those two codes ? Thanks a bunch
@hp_outdoors
9 ай бұрын
For the P0014 I would check the cam actuator solenoids on top of the head, timing chain end of the motor. See if the screens are covered with metal. P0014 needs to be fixed that's timing related. It could possibly be timing is off, or chain may have jumped somehow. If it was the o2 sensor #1, then drivability would be a concern. With o2 sensor #2 only trouble you should have is a failed emission test.
@richarddiaz8248
4 ай бұрын
Yes I justed subscribe due to the informative video you put up. Thank you for your knowledge and expertise.
@hp_outdoors
4 ай бұрын
Awesome, Thank you!
@miwanoff
8 ай бұрын
Thanks for the video. Question - before removing the timing chain, I am trying to line up the camshaft and intake /exhaust cams to TDC. I can’t seem to rotate the engine more than a few degrees in each direction - then it stops. Any ideas? Should I remove everything and then line up TDC etc?
@hp_outdoors
8 ай бұрын
Removing the spark plugs will help with rotating the engine. You can put the belt pulley on and bolt it up to turn the motor over with a ratchet. Unless the timing is off and your making piston to valve contact.
@Noidentity-j4d
3 ай бұрын
when you rotate the motor, lets say 2 times around or even once should the timing marks and arrows still line up? in these videos i dont see anyone rotating as if it doesnt matter. im not so sure
@hp_outdoors
Ай бұрын
No, after 1 or 2 turns the marks won't be lined up.
@Hamilton_Lambo
3 ай бұрын
One of the best videos I’ve seen on timing chain replacement. I need to do on my 2012 Malibu. Looks daunting
@hp_outdoors
Ай бұрын
Thanks
@brianrococormier4246
7 ай бұрын
I broke the upper bolt holding the black guide for the timing chain. Will i be ok
@hp_outdoors
7 ай бұрын
Not a problem, use Melling 5499GMB or Dorman 917-954. These are designed as a repair (in case the bolt breaks or timing chain takes it out) or an upgrade to the timing chain guide. Its a 2 in 1 access plug that has a stud made on the end of it to hold the black timing chain guide. The upper bolt behind the access plug isn't needed if you use it. Did it break smooth off or did it leave some bolt sticking out?
@rtbarrettautopreowned509
7 ай бұрын
You have a subscriber. You've done a wonderful job, sir.
@hp_outdoors
7 ай бұрын
Thanks, Appreciate it.
@DepravityWriting
4 ай бұрын
If you do not get a code for this issue, and do not have a clanking sound, and the vehicle is 150,000 miles[2014 equinox ecotec] am I good to drive for now at least? I bought this thing with 140k on it, probably a dumb decision in retrospect. Have already replaced cat converter and have put a fair amount of cash into it for maintenance. It has a smog pump code on but that's it. I checked out the carfax and I am not sure if this vehicle has had a timing belt change or not. If it hasn't, then obviously it's been due but..
@JHUS6500
4 ай бұрын
Change the oil every 3k on these I've done 20 chains. They go bad due to note changing the oil frequently enough
@DepravityWriting
4 ай бұрын
@@JHUS6500 Ok thanks. I think a big problem with the vehicle is I have the same issue many others do with it.. oil getting low rapidly.
@hp_outdoors
4 ай бұрын
This one here has around 230k right now. There a great driving vehicle, and really good overall. The timing system to me could of been designed better. Keep the oil level correct and don't let it get low.
@bowhunter3125
5 ай бұрын
Is it necessary to replace the balance chain kit?
@hp_outdoors
5 ай бұрын
You don't have to. But if one of the guides is cracked & wore, or the tensioner is not doing its job it may cause a problem. Balance chain also turns the water pump if something goes wrong it will run hot.
@octagoncreations7991
6 ай бұрын
Thanks for putting together a great video!
@hp_outdoors
5 ай бұрын
Glad you enjoyed it!
@lynnmason6020
5 ай бұрын
Very thorough thanks for posting
@hp_outdoors
5 ай бұрын
Glad it was helpful!
@AwesomeLife-h6p
4 ай бұрын
If your not replacing the phasers' is it necessary to remove them.?
@hp_outdoors
4 ай бұрын
Not sure if you can remove or re-install the chain without taking the phasers off.
@AwesomeLife-h6p
4 ай бұрын
@hp_outdoors nope I had to take the phasers off. The 18mm bolts were a BITC%! to remove!!!
@ledzeppelin1212
3 ай бұрын
Great video, thanks!
@hp_outdoors
3 ай бұрын
Ur welcome
@tommytate1804
5 ай бұрын
Is it ok if the old chain is a half link off
@hp_outdoors
4 ай бұрын
The colored links must align with the correct arrows for it to be in time.
@Kendonezia
8 ай бұрын
Ok so how much would this cost from a shop?
@hp_outdoors
8 ай бұрын
I never checked with a shop on what the repair would cost.
@nicholasharris4544
3 ай бұрын
I really enjoy repair videos. Subscribed and liked
@hp_outdoors
3 ай бұрын
Thanks
@hp_outdoors
3 ай бұрын
Thanks
@jeffsgarage1969
5 ай бұрын
Thank you 🇺🇸
@hp_outdoors
5 ай бұрын
Very welcome
@abuhamzahalmasry5627
9 ай бұрын
very clean job ,outstanding and to the point.
@hp_outdoors
9 ай бұрын
Glad you liked it!
@roscoewhitejr5621
3 ай бұрын
Thanks for the knowledge
@JeronimoStilton14
6 ай бұрын
How feasible is this without a lift?
@hp_outdoors
6 ай бұрын
In a equinox its no problem. This one was done sitting on the ground with the front passenger side tire & wheel removed. Place 2 jack stands under the front frame to support it. I put a jack (lay a block of wood on top of the jack) under the motor to support it, also to move it up and down a little to remove the motor mounts and bolts that are in the way of the timing cover.
@TwistedSag15
5 ай бұрын
So don't jack up on the engine/tranny just the motor mounts? Sorry, my wifes Equinox has this issue as well and would rather not throw away 2k for a job i can do in under a week.
@hp_outdoors
5 ай бұрын
Put a piece of plywood or block of wood on the jack and support the engine under the cast oil pan. Mostly just supporting or moving the motor a little so you can get the weight off the motor mount on the passenger fender. There are 2-3 other motor mounts supporting the engine/trans still attached.
@TwistedSag15
5 ай бұрын
@@hp_outdoors damn quicker than my local mechanic thanks boss got like a subscribe from this guy
@adamhandyside9836
2 ай бұрын
Did you put the tensioner in last?
@hp_outdoors
Ай бұрын
Yes, I thought I may accidently unlock it if I installed it to soon.
Пікірлер: 101