Just repaired mine. A 1/8" nut driver makes it a whole lot easier. Those screws don't come out too easily with needle nose pliers.
@robinson8088
5 жыл бұрын
I dont need to tie my AUX cable to the vent anymore!! Should have done that a while ago hahah. Thx dude
@schteiny65
5 жыл бұрын
Great video! Trim tool to remove the trim panel. 7mm socket to remove the stereo from the dash. 1/8” nut driver to remove the tiny nuts. Look for Standard (SAE) or inch Precision Nut Drivers. I used 60/40 rosin core solder. Easy with the right tools. Thanks for posting!
@doctorpepper4655
8 ай бұрын
radio been doin this for a year and i almost bought a new radio didi this and works perfect thank u so much!!
@gavinclennin2851
5 жыл бұрын
Thanks bud. Just helped me and 3 buddies fix this easily in our trucks. Seems to be a common problem.
@MrCoreyMartin
4 жыл бұрын
Yeah, I believe it is! I've done 3 or 4 now as well!
@ivanbradley-reeder1240
9 ай бұрын
I assumed it was this easy but didn’t wanna mess anything up taking it out
@Tomb-G19
2 жыл бұрын
XceLite P-4 1/8 driver for those tiny radio screws, you'll thank me later!
@stephenmartin6714
5 жыл бұрын
Bruh I need to see it move by move...
@barxracerful
4 жыл бұрын
its a 3mm hex screw. i got one out with a needlenose. then clamped in lightly in a vice. Cut a short pc of 3/16 brake line. Tap it onto the screw head. boom. instant nut driver.
@nicksaites8443
5 жыл бұрын
For lack of such a small socket for the tiny hex head screws, I ground my needle nose pliers a bit so they could fit in the deep holes and then used a dremel tool to cut slots on the heads so I could use a flat head to screw them back in and will make it easier should I have to do it again. The first time soldering worked fine but who knows about the future?
@hectorguevara2085
4 жыл бұрын
hola amigo puedes colocar un video haciendo funcionar ese reproductor con una bateria 12v
@victoriawhitej6808
3 жыл бұрын
How do i get mine out of my car?
@jordantate_
5 жыл бұрын
Can this be replaced with a better one?
@ImaLoneWolfintheWoods
5 жыл бұрын
Would this cause the aux to just randomly turn on all the time?
@MrCoreyMartin
5 жыл бұрын
I'm not sure, the issue my friend had on this one was that it kept turning off or not playing his music until he wiggled it.
@Tomb-G19
2 жыл бұрын
Mine randomly turns on lol
@ImaLoneWolfintheWoods
2 жыл бұрын
@Tomb 1911A1 that's what mine did, the soldering of those pins 100% fixed it.
@tonylocks28
6 жыл бұрын
Do you need flux to re-solder?
@MrCoreyMartin
6 жыл бұрын
I did use some additional solder to make sure there was a good connection.
@zeus_rene
6 жыл бұрын
Hey man did you use a nice soldering iron, or a cheap one? Wanna do this myself. Thanks!
@MrCoreyMartin
6 жыл бұрын
I had a butane one. But I would think just any iron should work.
@MrCoreyMartin
6 жыл бұрын
also this guy here as a little more in depth video of the soldering kzitem.info/news/bejne/25pmn61jmp6Gpag
@garrettmorrell7970
4 жыл бұрын
Bro you didn’t even explain the fix. Nor record proof of it being fixed
@keyworksales6241
4 жыл бұрын
Soldering is a basic skill. He doesn't need to show you how to solder.
@rpm20
3 жыл бұрын
Didn't show nothing!
@niroshabeekhuysen349
6 жыл бұрын
R u irish
@MrCoreyMartin
6 жыл бұрын
I have a little Irish in me from quite a few generations back, but I am Canadian.
@YTByteMaster
Ай бұрын
You didn’t explain shit bud
@CROSBYVSOVECHKIN87
6 жыл бұрын
Chevy is GM so u could have just said GM
@MrCoreyMartin
6 жыл бұрын
Well here is the thing, if I would have just said GM then if you or other people would search Chevy (chances are very high they will) they would never find this video. If I say both then viewers can search it ether way to find it.
Пікірлер: 31