Great tool just have to watch what you back probe.Bam there goes the brain
@paulstone949
2 жыл бұрын
Got the Austin Powers line, tight like tiger 🤣🤣🤣
@SmittySmithsonite
2 жыл бұрын
I just bought myself a Maestro for Christmas! :)
@ryanhunter7365
2 жыл бұрын
@@rickjackson2346 don't throw 12v at 5v by accident. know the hole yer probing
@katzenpapa
2 жыл бұрын
Hey Eric O, at 4:05 how do I make one of those test lights, or where can I buy one?
@99andrianmonk
2 жыл бұрын
"What did I grow a ......" spit my coffee across the room and laughed out loud. Sometimes a few words is better than a picture. Really enjoyed the video. Your explanation of the evap system is very effective.
@jerrygillette854
2 жыл бұрын
I did the same. Good thing I was on hard surface floors or I would have to send Eric a carpet cleaning bill.😁
@devttyUSB0
2 жыл бұрын
oh how the comments will go REEEEEE about that joke ;)
@QBRX
2 жыл бұрын
Mr. O, always good for a laugh, at least a guy laugh. Not sure what most women would think, and I'm not going to ask my wife.
@davidgilpin5200
2 жыл бұрын
I wonder what Mrs. O will say when she watches this video and hears Eric's comment? Maybe Eric spends some "quality time" on the couch? 😯
@QBRX
2 жыл бұрын
@@davidgilpin5200 Nah, I think she would be cool with it.
@hpurey
2 жыл бұрын
Anyone else click the like button before Eric starts the intro? I do that just so I don't forget at the end and a new video starts automatically. ;-)
@51ubetcha
2 жыл бұрын
What helps a lot is when you get a hook inside of a hose to separate it from a fitting, spray some WD-40 onto the space between the tool and the fitting. That has help me remove and install hoses during my 37 years of turning a wrench for a living.
@robertrosicki9290
2 жыл бұрын
Eric , You should have hit that vent valve a few times with your new purse , that would jar the hoses loose . Got the purse line from Cameraman, blame him .
@luvworldpeace
2 жыл бұрын
Lol love it
@billmammone5404
2 жыл бұрын
Good video as usual and yes some hoses are tough getting off, if possible I spray some silicone on them , usually helps some. Also glad you didn’t grow a vagina, don’t think Mrs O would be too happy with you!
@dans_Learning_Curve
2 жыл бұрын
He'd have to borrow yours! LoL 🤣😆
@MeMakeSparks
2 жыл бұрын
😂🤣😂🤣😆😆😆
@gunners4129
2 жыл бұрын
The most used saying in our shop lol. Right next to "Every tool is a hammer. . Especially if it isn't your tool"
@aaronbryant8315
2 жыл бұрын
I go between you and pine hollow diag you guys are great to watch very educational thank you !
@MrSpartanicus
2 жыл бұрын
I love when he uses the power probe, helps me feel more confident using mine.
@ryanhunter7365
2 жыл бұрын
you bought it to help you with diag....
@MrSpartanicus
2 жыл бұрын
@@ryanhunter7365 electrical diag is not my strong suit but I’m looking to continue improving in that area. This channel has helped me immensely and I am not a professional technician by any means but I do want to be capable when working on mine or my family’s cars.
@usethenoodle
2 жыл бұрын
@@MrSpartanicus DIY'ers Rule brother! I have a power probe too. I also have a whole array of wire taps, back probes and a couple really nice meters. I keep it all in one of those Harbor freight pelican type cases ready to go. I just used it the other day on my Superduty to diagnose a remote mirror switch gone bad.
@thecastros9104
2 жыл бұрын
The Classic 194 bulb is a very expensive special tool. I use mine all the time.
@jimclifford1241
2 жыл бұрын
You know it's going to be a good day when you wake up and a notification that there is a new video from Eric. Thank you Sir!
@ronniecauley2687
2 жыл бұрын
true true
@gogmorgoaway
2 жыл бұрын
That filter relocate is pretty critical on a farm truck that sees lots of gravel. The filter plugs right up if you leave it under the vehicle in the dust cloud. Gotta put it up at the front of the engine bay to breath some clean air.
@damiensintes3078
2 жыл бұрын
Awesome videos, very informative. Living in the rust belt, the rust on those vehicles is crazy bad. Glad to see you have the hacks to get around most of it.
@pootthatbak2578
2 жыл бұрын
Eric, Since you have new parts..i recommend " sprunt" when you arent feeling fresh down there
@philr1118
2 жыл бұрын
Beer will also make plastic jugs expand when in a warm car, we used to go to the Nationals at Thunder Valley and you could not take cans or bottles into the pit side of the drag strip so we would buy a keg and use that to fill up jugs...miss those good ole days :)
@joebuckley9940
2 жыл бұрын
Very thoughtful and meaningful explaination Mr. O. That certainly cleared up some questions I had, thx.
@elchefe7701
2 жыл бұрын
at 6:40 min?
@k1n2g4
2 жыл бұрын
@@elchefe7701 lol
@amber07701
2 жыл бұрын
Great to hear your explanations of how the system works. Always nice to see one of your videos and you taking time to share information
@wendwllhickey6426
Жыл бұрын
The 4.8 was made to use less fuel than the 5.4 a good motor put 160000 on it only prob was a knock sensor .
@u.p.driver1386
2 жыл бұрын
Eric, I own a 2001 Silverado with the big 4.8L 1500 and 475,000 miles Canadian model. I average 26.8 miles per gallon. Best truck and engine I have ever owned. Yes original engine (never been opened) It's a south Texas truck no rust belt.
@mauricegd
2 жыл бұрын
Thank you Mr. O, I watch a lot of your videos and they are really informative and I learn new techniques and information that I should already know, as a mechanic for 30 some years.
@DAKOTANSHELBY
2 жыл бұрын
When I diagnosed the purge leak fault on my '03 Chrysler Town & Country I was surprised to find that nearly all purge hoses cracked and leaked about the same time. Meaning when the hoses aged to a specific time period, they all failed in the same manner around the same time, give or take. That's why I cringe when a hood is opened and all we see are hoses of all sorts and not the engine. Eventually they all will need replaced.
@richardjones3112
2 жыл бұрын
This made my day😂,great diagnosis and explanation and top quality comments!A strange phenomenon there are men all over the world suddenly growing one of those…..strange times.
@stuckinmygarage6220
2 жыл бұрын
ROFLOL. 😂😂😂😂
@1607rosie
2 жыл бұрын
It always amazes me how crusty cars and trucks are in the rust belt. You don't get that at all in the south west.
@mariosaccoccio1688
2 жыл бұрын
I remember when hose clamps were all stainless, not just the strap. Yeah, I'm old!
@nismo20032
2 жыл бұрын
You can still buy them. Just not at your local parts store. Breeze clamps are my #1
@davidmcclain5180
2 жыл бұрын
great video on a common problem but the best part is the explanation.
@jamesu
2 жыл бұрын
Thanks for the video Eric. I see you are getting hammered by the snow this morning. Be safe!
@Mike_Engel
2 жыл бұрын
Welcome Back Eric... Never knew about how the Evap valve worked... I am new to this stuff.... THANK YOU!!!
@mbs5328
2 жыл бұрын
"Because it clicks, we know it's good." Yeah, you did trick me on that one. Thank you, I needed that.
@TSiZj
2 жыл бұрын
I always wondered why my 2006 Sierra has a long run of heater hose run from the tank all the way to the transmission! Good to know!
@davekoob
2 жыл бұрын
Best way to cap off the week!
@MrDillon2029
2 жыл бұрын
Great videos man! Love how you show literally everything scan tool and the data
@danfalley9296
2 жыл бұрын
Good video Eric. Those things are basically just disposable in dusty conditions where we live
@cj7fun579
2 жыл бұрын
Great video! My 2013 1500 5.3 ext cab 4x4 had the check engine light on with PO455 code, so changed the purge valve on the engine first with a GM original part from Rock Auto, cleared the code. next day coming home the check engine light comes back on, same PO455 code, so I ordered a PN: 22840971 Vapor canister vent solenoid valve assembly, hoses included GM original parts from Rock Auto, got the new parts and compared the old with the new and it was identical to old part. Installed the new part, fit perfect, cleared the code again, hopefully this will work. besides, the trucks getting older and i plan on keeping the truck for a long time, so I thought it was a good idea of preventive maintenance.
@arielcastro34
2 жыл бұрын
Did that fix the code P0455?
@patrickreynolds801
2 жыл бұрын
You are one of us mechanics and at times words fly out. No offence here bud. Keep on keeping on.
@SimiNelsonFamily
2 жыл бұрын
Very helpful video. You took the mystery out of the vent valve system. Remember, think it, feel it, but don’t say it.
@mr.anderson910
2 жыл бұрын
had a 2003 silverado with the 4.8 LS. also had the evap codes. replaced and relocated the evap system still had the codes, i emailed black bear preformance and had them delete my evap system and codes via mail in tune. Never had a problem fueling up or a check engine light again. Sold it with 276,000 miles extremely solid and reliable truck even in the Wisconsin salt belt.
@cindywyattrailey8391
2 жыл бұрын
Love your channel ...This is as close as you can get to Reality KZitem.Beautiful content ,Thanks !
@nolanbrown84
2 жыл бұрын
My wife's grandmother called me not long ago saying she took her 2001 Silverado(legit garage find, zero rust, 55k) into the dealership to get a CEL figured out. Techs said it was the same codes as what this video describes(I checked them myself with a cheap iPhone code reader). They estimated $900-1100 to repair. She could afford it but she called me just to run it past me. I stopped over, fiddled with the gas cap, wiggled each and every fitting on the evap circuit and pulled the fitting out of the intake and cleaned it. 12,000 miles since and no codes. Is that the problem everytime? No I'm certain it's not and many times it's far more in-depth than that. But how many times has a dealership done that to people who don't have someone that is halfway mechanically minded?
@Fix_It_Again_Tony
2 жыл бұрын
That is a key part of their business model. They give you some inflated repair cost for an old vehicle in the hope you'll trade it in on a new one.
@HouseCallAutoRepair
2 жыл бұрын
More often than you think. Look at how any "scammed by the stealership" videos there are!
@J.A.GCustoms
2 жыл бұрын
Just had a small evap leak on a 2011 Jeep Grand Cherokee with the big 3.6 Liter….. Just changed the Gas cap and cleared code with my basic scan tool ! Fingers Crossed 🤞 the money light doesn’t come back
@stuspring6301
2 жыл бұрын
Please say Christmas! We need more of it!
@spelunkerd
2 жыл бұрын
It's always nice to see different methods to get to the same diagnostic goal. I wonder if the reason the vent valves are prone to failure is because moisture that condenses in the line has nowhere to go, then it freezes on a cold day, damaging anything nearby. So the manufacturer tried to shift the location of other parts so the valve would be farther away from ice. Problem is, there's only so much headroom under the vehicle.
@mph5896
2 жыл бұрын
I always find them full of very fine dirt.
@travissheehan6082
2 жыл бұрын
I can tell you they fail all the time here in Florida to, where it doesn’t freeze much so I doubt that’s it !
@rydplrs71
2 жыл бұрын
It’s dirt. The vent intake relocation makes condensation and gravity feed back to the valve even worse then the original location.
@SouthMainAuto
2 жыл бұрын
The early GM trucks (97-98ish) had them under the hood. I never changed one of them.... EVER. Do the math haha
@jhonditch4269
2 жыл бұрын
@@rydplrs71 well that makes 'the fix' perfect' more work for emissions repairs I wonder if they can limit emissions from hybrid or all electric vehicles we all know they must be emitting hazardous substances, California must label them with their hazardous material warning already.
@GunfighterWyo
2 жыл бұрын
The furnace is just a gentle hum in the background. Reminds me of my father's transmission shop in the winter. Not that we have winters like y'all.
@agmc4me
2 жыл бұрын
I know it's early but this is my vote for SMA video of the year
@carlosanzola2938
2 жыл бұрын
I use the special tool for tightening the ty-raps, its made by Thomas and Betts. It works great! You will also want to make sure to use Thomas and Betts ty-raps because they have a metal locking tab instead of a plastic one.
@AntonioClaudioMichael
2 жыл бұрын
Good Old Power Probe IV I have the master kit great tool for testing Circuits great tool for testing wire integrity... I would say be careful with power probes to the viewers they can destroy circuits if there not properly used Great diag video as always Eric O @SouthMainAutoRepairLLC
@hrdworkin7633
2 жыл бұрын
Thanks for another great video! BTW: If you did grow one, just chop it off!
@joelash5914
7 ай бұрын
Thanks I think you might before me out with this canister leak valve. Money lights on I'll have to check it and replace tomorrow thanks Eric
@terrynations2243
2 жыл бұрын
The relocation kit does work for Chevy trucks in the south. The first one on my 06 Silverado failed in 2009 because of dust and dirt, it was updated to the relocation kit. And hasn’t been changed since, still have the truck.
@grngs1
25 күн бұрын
Your videos are THE BEST!
@Christophergriffiths1972
2 жыл бұрын
Absolutely love your KZitem channel mate. I live in the UK and stumbled on your channel the other day. I’m now totally hooked and love watching what you do. Your so funny as well. I’m a roadside technician in the uk and would love to work in a workshop like yours. Keep up the good work my friend. 👍🏼👍🏼👍🏼
@ernestopenaloza6449
6 ай бұрын
Outstanding video. Your videos are very educational and have helped me and my partner solve many issues in our tiny service shop.
@jmabs5096
2 жыл бұрын
6:40 "I took some time off at Christmas, wait can you say Christmas?" 15 seconds later"cmmmmonnn did I grow a vagina?!" That is soooo not PC Mr Eric O! We still love you 😂
@crlaw75
2 жыл бұрын
Bwhahahahaha!
@jockodog2009
2 жыл бұрын
Thanks for another reason to justify the PowerProbe in the tool box, even if the 194 bulb tester did the trick, too. The PP audio tone confirming power to signal wire is helpful. Merry belated Christmas and a Happy vag to you and yours.
@cgmoog
2 жыл бұрын
I see Astro finally sent you a new light with a working magnet.
@killermacmc
2 жыл бұрын
If there ever was a war on Christmas, you guys won. Christmas is a 3 month long holiday in the U.S. I don't get where all the bitterness comes from.
@robertshaw4833
2 жыл бұрын
I just changed the purge valve on a malibu but I don't have the snap on computer scan tool I wish i had a scan tool I troubleshoot cars the hard way ,it would so easy with a scan tool, great videos
@bobbartholomew85364
2 жыл бұрын
Hello from Yuma Arizona. Yesterday was at the local Hondoooo dealership getting my CRV serviced, watched your videos while I waited.
@michaelhumphreys2118
2 жыл бұрын
Had an EVAP code. An took it to the dealer to be fixed. The first time. It made it till the next day. Before my check engine light came on. Went back an they moved it on top of transmission. Was leaving an it came on before I got off the lot. So they said they would code my truck for free. As long as it was the EVAP circuit. Not to worry about it. Because it had nothin to do with the performance of the 6.0. I'm true to my GM 3/4 ton and 1 ton trucks. But! I'm having serious doubts about what I thought was the for sure way. To correctly fixing all computer code problems. Wish I could find a man as honest and skilled as you. In my area. To work on my trucks. But watching your vids. Let me know that if you can do it. That I can to. Rather work my trucks. An find someone I can trust. To fix them
@dannycole9401
2 жыл бұрын
Putting the load on it is the best. Had one the other day that had no control side ground. It also wasn't working after fixing the broken wire along the frame. But the pressure sensor was also reading -10. So it had 3 problems. Another shop overlooked all of it and changed the purge valve. AkA guessed. It was a tire shop.
@jessedunham5173
Жыл бұрын
You make me laugh every video I see of you, your way of describing what you’re doing is fantastic. I could work in your shop for sure, thanks for sharing the way you do 😊
@richardraymond5535
2 жыл бұрын
Just got this code a few days ago and look who comes to the rescue!!!
@blaken3824
2 жыл бұрын
I *just* had this fixed on my '08. Passed all the tests. They had to use a laser to see where smoke was barely coming out, top of sending unit elbow thing.
@bobcarry4820
2 жыл бұрын
I found using a pair of vice grips slightly tightened over the hose at the location where the clamp was and give it a turn will loosen the adhesion. Then you can pull off normally.
@pineychristian
2 жыл бұрын
I have a 2013 Chevy Silverado 1500 with the 4.8l. I am so glad I have this engine vs the 5.3l . The 4.8l and 6.0l didn't have AFM. That ruins engine. They take a great LS platform and ruin it with AFM or DFM. . Garbage
@JamesP33R
2 жыл бұрын
Back 40 repair kit, aka chunk of green garden hose.... :)
@PtownCaDaBay
Жыл бұрын
Great video well explained. The hose from my field neck to my gas tank was recently cut in attempt to siphon my tank. I put a new hose on. check engine light went off came back on a day later. And now I'm not hearing the distinctive click from purge valve. I think I'm going to try to replace the valve and hope that fixes my issue. Thanks for the video
@danehendrickson457
2 жыл бұрын
Hey folks if you haven’t seen them before, Blue-point (and harbor freight lol) make a Hose Grip Pliers set that really make getting heater core and rubber lines unstuck a breeze!
@greggc.touftree5936
2 жыл бұрын
He didn't explicitly state NAPA was not a sponsor. SOUTH MAIN AUTO CONGRATS ON YOUR NAPA SPONSORSHIP!
@phprofYT
2 жыл бұрын
Can you say Christmas? Yes. You already did. Merry Christmas.
@clintletendre5585
Жыл бұрын
If everyone else can celebrate Every other holiday then you can celebrate Christmas and say Christmas! It's what it means to you not necessarily what it means to anyone else!
@Rithius3485
2 жыл бұрын
I got the same truck and I got a P0451, P0446, EVAP system vent control circuit, and EVAP system pressure sensor/switch "A" circirt range/performance... I checked the canter like you did and the thing under the hood is good, my thought is that its the fuel tank sensor.
@cquay3
2 жыл бұрын
Even my wife laughed 😂😂
@Boilerking76123
2 жыл бұрын
Mrs O was standing right there, she could have pulled the hose off for him.
@MeMakeSparks
2 жыл бұрын
😆😆😆😆
@glassvial
2 жыл бұрын
Called it in the last vid that Eric O was working on some CHEVY THUNDER! As far as stuck hoses, sometimes I have luck taking some penetrating oil and one of the red straws for it and squirting it in-between the hose and whatever it's stuck on.
@davyarthurs
2 жыл бұрын
Just notified the size of the gas tank in that truck. Would cost approx $180 in the uk to fill that!
@fastindy
2 жыл бұрын
Here I was, residing in the time of January 6, 2022, wishing that I had an SMA video to help guide me along P0442 and P0455 codes that I just started getting on my 2005 Silverado 6.0. Life gets better every day!
@bossmoneystreet3589
Жыл бұрын
I'm going to check it out thanks for the heads up 👍👍👍💯💯💯💯💯💯💯💯💯
@weshawkins7165
2 жыл бұрын
I took the last two weeks off also, because we had a storm blow through, dumped over two feet of snow and knocked the power out for two weeks. Just came back on about twenty minutes ago. Guess I have to go to work tomorrow.
@MohammedMohammed-op3cz
2 жыл бұрын
Thanks alot for sharing. Great info
@davidball1014
2 жыл бұрын
I have a 2007 chevy Silverado and it has the 4.8 engine. Its been a bullet proof engine.
@SmittySmithsonite
2 жыл бұрын
You're lucky. I've got the 5.3 in the same year, and I'm getting ready for an engine swap at 117k miles. Nothing else on that truck could make it 100k, except the transmission - that failed at 103k. Been the biggest POS I've ever owned in my life! Bought it brand new, and took care of it better than any vehicle I've ever owned, too. Ran the best of the best synthetics since the day it broke in. Didn't help much. Parts quality has gone down the toilet.
@williamgagnonroadboxservice
2 жыл бұрын
Good Morning coffee and a SMA video.. Going to be a great day. Iv changed at least 6 of these valves in the last month Go old New England. We love salt here in Springield, Ma
@jorgefernandez-mv8hu
2 жыл бұрын
Thanks for the informative video and the banter.
@cojones8518
2 жыл бұрын
If a hose is giving you that much of a problem, you can pry it away from the connector with a pick and give it a shot of silicon spray, wd, or anything else you've got at hand to loosen it up and lube it.
@QB_Wopster
Жыл бұрын
"it's in Canadian" eh ? It's called the metric system. Kinda reminds me of a job I did in Waco Texas a bunch of years ago. People were coming out in droves to see Canadians but were sadly disappointed cuz we left our igloos and tepe at home. All that aside thanks for the video and info as I need to fix my rust bucket now. I really wish we had a salt shortage around here
@triplecool100
5 ай бұрын
Just found your channel. Your excellent brother. Very informative. Plus, triple cool! Thanks
@MrBill-xs6bx
2 жыл бұрын
Happy New Year..... Im learning alot from every video you make.. Thank you Eric O
@howsthis4aname
2 жыл бұрын
Yes ,you CAN say " Christmas " !! On that note , belated Merry Christmas and Happy New Year !!
@cascadesouthernmodeltrains7547
2 жыл бұрын
I sold autoparts for 15 years. Just 7 or 8 years ago those vent valves were $70+ depending on which one you needed. Where I live they started becoming a common failure about 5 years ago, and now they are about $20
@windward2818
Жыл бұрын
If you want a hose clamp that will not rust (at least corrosion resistant in the presence of salt water) you can use an all 316L SS clamp (Salt Water Marine type) from PYI. They are expensive, but are excellent for the repair you are making (rust belt under vehicle, OBD-II Evap emissions critical leak). The PYI clamps have rolled edges which work well on tubes with no nipples, barbs or beads. I see the OEM quality for critical use hose clamps vary greatly. For example, a tank fill hose clamp which is SS except for the screw, which corrodes to the point where it can't hold the clamp pressure, or is unusable once disconnected. For the repair I would take the opportunity to treat the connector and actuator contacts with Deoxit D5 spray. I would also make sure that the harness to the actuator cannot vibrate (move) underneath the vehicle while driving. So, I would tie-wrap the harness so it cannot move relative to the solenoid. Evaporative emissions are stringent, so much so, that the hose types should have a low permeability rating and obviously be hydrocarbon (fuel vapor) compatible. I think Eric used a large fuel line hose, which would work. I could not see any markings on the new hose.
@busterhymen3115
2 жыл бұрын
Not offensive at all. Another great video. I love your "Units" of measure ie blond one, etc.
@ryanwilliams1651
Жыл бұрын
Thank you for explaining the system. I like your work!
@SmudgyContent
2 жыл бұрын
6:56 😂😂😂 after Eric says did I grow a 👀Va-Jayjay his holler afterwards 😂😂😂👍🤔🤨
@shadowopsairman1583
2 жыл бұрын
Vent Valve(Tank), Purge Valve(Intake), Charcoal Canister(Bed), Lines, gas cap, tank pressure valve...
@oshkoshdom2197
2 жыл бұрын
I've been saying Merry Christmas for 60 plus years with no issues, explain to me this alleged Christmas problem you have.
@warrenzevonsangryghost6055
2 жыл бұрын
Faux News viewers have to be constantly enraged about something....shit, just make it up if you can't find anything.👍
@mforrest85
2 жыл бұрын
Some people (non religious people) don't like the fact that it is a religious holiday but they want to celebrate it. Also they don't like the fact that it has Christ in it. So they want to start stuff about calling it Christmas.
@oshkoshdom2197
2 жыл бұрын
@@mforrest85 Not once in my 62 years on this planet have I ever run into anyone that was offended or otherwise adverse to me saying Merry Christmas. The "war" on Christmas is BS.
@mforrest85
2 жыл бұрын
@@oshkoshdom2197 me either but now a days people will complain about anything. I don't understand it myself.
@45AMT
2 жыл бұрын
Great EVAP explanation!
@ChrisVargasrpht2000chris
2 жыл бұрын
You sir are just awesome.
@alberteller7286
2 жыл бұрын
Good work doc that was interesting.
@Delta3111
Жыл бұрын
Thanks for the good knowledge appreciate your videos 👍
@wilgoo55
Жыл бұрын
Great information, appreciate the step by step explanations. Keep em coming!
@atvseatexchange2176
2 жыл бұрын
Over here in Chenaggo County we grow corn and hay!
@jamesterrill1938
2 жыл бұрын
Another great lesson...
@chief356
2 жыл бұрын
Eric great video you know a lot, i did my trade school in H.S. auto Mechanics i dont know half of what you know, But i have a 2004 Grand cherokee 4.0 same color as yours i have Po455, The Po442 is pending, I bought a smoke machine autoline pro Amazon 120.00 and i found my leak it was a line going from the fuel tank to the charcoal canister that elbow was crack on top, went to advance auto they haven't ha rubber hoses in 4-5 months I use the Blu Driver
@raafatkamel28
2 жыл бұрын
nice job
@tobyhudson5771
2 жыл бұрын
I love you South Main Auto!
@TONYSTARK-jh2wu
2 жыл бұрын
gm made the 4.8 because MORE POWER BABY!! boost the hell out of it
Пікірлер: 661