Chevy Malibu Sway Bar End Link Replacement! Covers 2008 2009 2010 2011 and 2012. Chevy Malibu Sway Bar End Link Installation! Chevy Malibu Sway Bar End Link Removal! EASY Step by Step Sway Bar End Link Replacement for the Chevrolet Malibu! I will show you how to remove the Sway Bar End Link. Easy step by step installation and removal tips. Instructions also apply to other cars!
►Support the Channel & Purchase WorkingWithWimberley Mug!◄
www.workingwithwimberley.com
As an Amazon Associate I earn from qualifying purchases
Craftsman Socket Set: amzn.to/37fwBZW
Pry Bar 36” amzn.to/3avhIVq
GoPro Hero 7 Black (What I Use to Record): amzn.to/2NCDCwf
► Subscribe: www.youtube.co...
► Website: www.workingwith...
► Instagram: / workingwithwimberley
► Facebook: / workingwithwimberley
► Twitter: / wkwithwimberley
► KZitem: / workingwithwimberley
STEPS:
1. Use 19mm wrench & 8mm socket to remove loosen the upper nut
2. Use 18mm socket and ratchet to remove the upper nut
3. Use breaker bar and 18mm socket to loosen the lower nut
4. Use 19mm wrench & 8mm socket to remove loosen the lower nut
5. Remove the lower nut by hand
6. Use pry bar between lower control arm and sway bar to relieve the tension on the end link
7. Remove the end link
8. Install the new end link at the top
9. Thread on the nut by hand
10. Use pry bar between lower control arm and sway bar to align the end link
11. Thread on the nut by hand
12. Use 17mm wrench and 18mm socket and ratchet to tighten the nuts
TOOLS USED:
1. 18mm Socket
2. 8mm Socket
3. 3/8” Ratchet
4. 19mm Wrench
5. 17mm Wrench
6. Pry Bar
7. WD-40
8. Breaker Bar
PART NUMBERS:
Valuecraft V1880252
This is a how-to video for the “Do-It-Yourselfer” working in the home, driveway or garage. No fancy or crazy expensive tools. I'll show you step by step how to get the job done!
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing*
Music by @tru_inferno: truinferno.ban...
Disclaimer:
Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, I cannot guarantee against improper use or unauthorized modifications of this information. Steven Wimberley & WorkingWithWimberley assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Steven Wimberley & WorkingWithWimberley recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Steven Wimberley & WorkingWithWimberley.
Chevy Malibu Sway Bar Link Replacement How To Replace & Install End Links 2008-2012 Ball Joints #WorkingWithWimberley Episode 34
Негізгі бет Chevy Malibu Sway Bar Link Replacement How To Replace & Install End Links 2008-2012 Stabilizer
Пікірлер: 93