Well done. Exactly what I needed to see for my project. Thank you, HMG.
@hybridmusclegarage4590
Жыл бұрын
glad it helped
@CliffClaven22
3 жыл бұрын
Amazon sells a variety sanding disk with holder + the little safety stem, I just got masking tape and wrapped around it to remain open.
@hybridmusclegarage4590
3 жыл бұрын
Cool man, Thanks
@frankthespank
3 жыл бұрын
I gave up trying to buy the $15 (or was it $20?) version, they were all broken out of the box so I “splurged” and got this one. I bought the cheap $15 straight air grinder and that one worked great out of the box. Here’s a tip: Buy the other sanding disc holders in 2” and 1”, as you wear down the 3” discs move it to the 2” and then the 1” holders ‘cause it’s the outside of those discs that also wear down first, you’ll make those discs last a long time and you’ll use ALL of the disc and not just the outside ring. 😎
@hybridmusclegarage4590
3 жыл бұрын
Great tip on the holders. Thanks for that!!
@woodworkerroyer8497
3 жыл бұрын
I just bought the new one. The one that has the SAME model # and yet is all black and has a rubberized grip barrel lol. Works great so far! About to grind the paint off an old beat up hand plane, so we'll see how well it works on a 6g compressor!
@hybridmusclegarage4590
3 жыл бұрын
Awesome Man. let me know how you like it after a few trials. Maybe Ill do a review on the newer one like yours. THANKS for watching
@woodworkerroyer8497
3 жыл бұрын
@@hybridmusclegarage4590 it worked GREAT on the plane. I think the cheap sanding disk kit from HF was a mistake and it doesn't like only having 6g of air, but the tool is great and it's not its fault I can't afford an 80g compressor lol
@woodworkerroyer8497
3 жыл бұрын
@@hybridmusclegarage4590 out of curiosity, do you think buying a 10 or 11 gallon tank (not a compressor, just an air tank) and hooking it up to my 6g compressor would improve the run time? Or would it improve it a bit and then just take 3 times as long to refill before I could use it again? Or would it not have enough air at all and do nothing for me?
@hybridmusclegarage4590
3 жыл бұрын
@@woodworkerroyer8497 A 25/30 gallon would work fine. A pancake/6-gallon runs out of air way to fast
@hybridmusclegarage4590
3 жыл бұрын
@@woodworkerroyer8497 Yes adding a tank helps alot. It will take longer for it to air up, as the pump is only made for the 6/gallon. But adding a extra tanks will help!
@impressit6235
3 жыл бұрын
I do need one of those. Great info, thanks
@hybridmusclegarage4590
3 жыл бұрын
Thanks
@pattycasillas757
4 жыл бұрын
Great video very informative!
@hybridmusclegarage4590
4 жыл бұрын
Glad you enjoyed it!
@joeskinwalker7628
3 жыл бұрын
Wow haha i just got one. Thanks for the review.
@darrenporsch
11 ай бұрын
I bought Harbor freight's cheap Central pneumatic version It has a metal nut on top like you're talking about but I only used it maybe seven or eight times in 5 years and the gears inside shredded. The chief one you have looks a lot nicer but it's also about three times as expensive now. But I bought a husky to replace the cheap Harbor Freight one cuz the Husky one comes with a 3-year warranty. Harbor Freight only gives you 90 days unless you want to pay for a one or two year warranty
@leodeboca
4 ай бұрын
what size air compressor would work with that grinder? I need to remove some corrosion from my truck. Thanks.
@hybridmusclegarage4590
4 ай бұрын
you will want to start with a 25 gallon. anything bigger is better. anything smaller wont keep up.
@theodorebowers9737
3 жыл бұрын
I have this angle grinder since they came out and I use it hard never had a problem still like it I also have their what they call that air shander the one that's narrow and stuff by chief I like it too I beat the hell out ofit a lot over a year holding up great so far 👍dude don't by they sandy disks and things they .I by the ones on Amazon , really cheap including the holder and everything I can buy like 20 times more for the same price . I use a lot .
@hybridmusclegarage4590
3 жыл бұрын
Awesome, thanks for the heads up!!
@Myersmetalworks
3 жыл бұрын
I also have a CHIEF die grinder from Harbor Freight and have found it to be a very good tool out of others I have purchased in the past... Great Video...
@hybridmusclegarage4590
3 жыл бұрын
Yes its great, Thanks Metal!
@fabianhernandez8123
4 жыл бұрын
Fabian was here
@johnmilner7603
3 жыл бұрын
I bought an all metal Bolton brand, 20,000 rpm, 2.2 cfm @90 on sale at Lowes for less than $30.
@scott22v
Жыл бұрын
Might want to think about putting that gauge on the other end of that hose.
@jerseypb2223
Жыл бұрын
I use an angle grinder all day working At a tire shop. Was wondering if it could hold up to about 1,000 tires a month before I buy it. I already have a Cornwell one now that was super expensive but I need a back up one and this looks really nice for harbor frieght
@hybridmusclegarage4590
Жыл бұрын
Mine still works like new and i use it all the time. As far as how long they last, I dont know.
@jerseypb2223
Жыл бұрын
@HYBRID MUSCLE GARAGE thanks. I tried the central pneumatic one and it was garbage. I think I'll try this one out and see how it does.
@hybridmusclegarage4590
Жыл бұрын
@@jerseypb2223 Im willing to bet youll be happy with it. Just keep it oiled.
@Steelcrafted
3 жыл бұрын
Def a DA sander would be a much better method of taking that rust off...much faster and stays flatter and no chance of stray scratches
@hybridmusclegarage4590
3 жыл бұрын
Good point, but i have been looking for a reason to buy an angle grinder for a while. Thanks
@lowlowsandclothes9923
3 жыл бұрын
@@hybridmusclegarage4590 try the 10 dollar harbor freight one, it works really good for really light things such as grinding and wire wheel, but it also cuts well, the only problem Ive found with it is that the lock button is pretty weak but then again I’ve been over tightening all of my discs. For 10 bucks you can’t go wrong
@hybridmusclegarage4590
3 жыл бұрын
@@lowlowsandclothes9923 Awesome man, I'll check it out!! Thanks
@faceplant7148
4 жыл бұрын
I need one now LOL
@kicknsystm
3 жыл бұрын
I didn't know what that check ball was. I have a Aircat I took apart & greased.
@hybridmusclegarage4590
3 жыл бұрын
Thanks for watching
@grippgoat
2 жыл бұрын
Sounds surprisingly quiet?
@hybridmusclegarage4590
2 жыл бұрын
As a matter of fact, it is!! I love it. Thanks for watching.
@jackchasteen8601
Жыл бұрын
I've actually done a 56 chevy and a 69 charger with little high speeds...
@rosewindham6033
3 жыл бұрын
Oh cool
@hybridmusclegarage4590
3 жыл бұрын
thanks
@Humboldtcounty707
2 жыл бұрын
The Central pneumatic is all metal, and is still a piece of junk..
@jasondlts
3 жыл бұрын
The central pneumatic die grinders from Harbor Freight are complete trash. The gears in the head are too soft and strip easily. There's a huge difference in quality stepping up to the Chief.
@hybridmusclegarage4590
3 жыл бұрын
I never knew That. I will say the chief has been put through hell and still works like new. Good info. Thanks
@woodworkerroyer8497
3 жыл бұрын
Good to know. Glad I got the Chief one instead of the CP one that was half the cost.
@hybridmusclegarage4590
3 жыл бұрын
@@woodworkerroyer8497 I think Chief is way better than CP. Years ago, all I used was CP lol.
@jamesbornman5556
3 жыл бұрын
No they don’t work the same
@hybridmusclegarage4590
3 жыл бұрын
??
@bearskintats4478
3 жыл бұрын
Yo I watched this just to see the direction you spun the keys to tighten and loosen the collet because mines stuck and you showed so much useless stuff with out that. Ridiculous
@hybridmusclegarage4590
3 жыл бұрын
Glad I could help.
@johnkordish3546
Жыл бұрын
Taking that safety switch is not a good idea
@ttss5726
7 ай бұрын
Well you didn’t take long to show up did you. 😂😂😂 you’re a clown I’m guessing you run around in bubble wrap in daily life. It’s. Sander it’s not going to do much except remind you not to make the same mistake again.
@alfletch93
3 жыл бұрын
hft sanding discs suck
@hybridmusclegarage4590
3 жыл бұрын
I use them cause they are cheap. If Im going to do some serious work, Ill buy the good one's. Thanks for watching
@goodfellasinc.5648
2 жыл бұрын
You could tell you don't know about grinders sorry but I don't think you should give your opinion on this tool and probably any tool's so your saying that you don't need a good grinder for engine porting or Metal work lol find something else to do SMH
Пікірлер: 64