Interested to hear our thoughts? We've experimented with a little write-up on our build experiences with some key information. Have a read, let us know if this is something you'd enjoy more often alongside the videos 🙃 Link below: www.mrmattlee.com/post/lianlisup01
@CarlosDeBernardMrAgapi
2 ай бұрын
just sign in
@kennethz3366
2 ай бұрын
Wow... I really enjoy reading your article with the video. It's a more complete review. Thanks
@TheBlueBunnyKen
2 ай бұрын
Have you seen the testing done on this case's airflow? It's pretty crazy
@noahjz
2 ай бұрын
The article was interesting and answered a lot of the questions people are asking in the comments! I'd love to see more of these.
@masbuba
2 ай бұрын
You better put a layer of air filter sheet/foam on the casing walls that have input flows. And also if you have time to dremmel the back of your casing so your fan can stay inside.
@arpadracz6571
2 ай бұрын
I started planning my own PC build a year ago. Then I found this channel. I subscribed after 3 minutes. The work put into the content is incredibly enjoying. I simply love and appreciate the work behind it. always and always new and new ideas are born. It's art. Thanks for the content and work. You are the goat of PC building Matt. Keep it up.
@bartphilips2222
2 ай бұрын
been here since 15k subs, this is the best PC building channel on YT.
@justanobody4983
2 ай бұрын
At fist i didnt like the look of the case but the air flow is top tier. Lian li really on its case game this year. Few months ago the dan a3 and now this. Another great build mr matt!
@Mr_Matt_Lee
2 ай бұрын
This. At first I had the same feelings about the case, but done properly it's really an aesthetic beast! Have an awesome week buddy :D
@aohjii
2 ай бұрын
@@Mr_Matt_Lee how does this compare to the liancool 216 in cooling performance
@Nikolai94
2 ай бұрын
GPU temperatures are terrible according to two tests I read.
@christopherbussiere4415
2 ай бұрын
@@Nikolai94 Reading is by no means information.
@justanobody4983
2 ай бұрын
@@Nikolai94 jayz two cents tested it and gpu temp around 55c - 60c. I think its a decent temp.
@Angelo_4090
3 күн бұрын
I like the fact how we can finally see the full layout of the motherboard without the card getting in the way. Problem with this setup is that if you're sitting to the right side of the case then you're gonna be showered with all that heat...lol
@pedrovieira4313
2 ай бұрын
That back fan being on the exterior is just weird, but the case in it's self is pretty sick!
@CaseyHardman
2 ай бұрын
My Lancool 216 has this. I have a Noctua A12x25 fan pulling air from the 4090 FE's rear exhaust. I don't really have any statistics for myself, but from what I've read/watched and feeling the heat behind it, it works pretty well!
@xxxmtb
2 ай бұрын
looks like its barely doing anything other than making noise looking at the smoke
@zZTrungZz
2 ай бұрын
Rear fan being intake doesn't work well. The heat exhausted above the fan will be sucked back into the case.
@CapInYoAss035
2 ай бұрын
@@zZTrungZzon a regular case; Yes, it won't work. But, with this case; it works well. Didn't you watch the airflow visualization on this video? Did any of those smoke go back in the rear fan? The fan on the side of the case made sure those heat/smoke does not go back in the case.
@SniperPFL
2 ай бұрын
@@zZTrungZz Hot air out the backside (lol) 90 degree turn to the rear fan which is a total of about a foot distance, don't think the air will mix unless the pc is in a box.
@Tussorte_Dhaffer
2 ай бұрын
That screwdriver spin. Had to watch it 5 times 🤩
@NAMze86
2 ай бұрын
This is my dream machine right here!! Looks great! Glad they tried something a little different with the GPU placement and it just works well!
@mottplay
2 ай бұрын
Earliest I've been on a video but the production quality and editing are always surprising!!
@Mr_Matt_Lee
2 ай бұрын
Great to have you here :D Glad you enjoyed the video!
@bartphilips2222
2 ай бұрын
when you think the bar is set to maximum, Matt Lee uploads a new build.
@_yzx3359
Ай бұрын
This is one of the most cleanest PC Build Videos i have seen so far. Love it 👍
@harithagt
2 ай бұрын
This channel seriously deserves more subs and views for the sheer production quality and creativity. Amazing stuff Matt 🙌🙌
@Fishkers_1
14 күн бұрын
This was my first time watching one of your videos, and i loved the transition of music from intense to calm when building. Love it!!🎉
@wazjoony
Ай бұрын
loved this video, I actually used your videos to guide my first PC build I did on my channel! So big thank you to you !!
@sevenoriginalsins7766
Ай бұрын
This style of editing is the best ive ever seen.
@_Snarky
2 ай бұрын
Love how it somewhat removes a hotspot that develops if the gpu and cpu are close together.
@commanderfoxtrot6034
2 ай бұрын
These videos are truly a work of art, you gotta be an artist to make these
@CErra310
2 ай бұрын
I was originally conflicted about the fan mounted to the rear of the case but the USB drive sticking out helped rationalize that it really doesn't stick out any more than the normal periphery. thanks for that detail!
@evanom117
2 ай бұрын
This may have been one of the cleanest builds I've ever seen it's awesome 😎
@Hamatorasu
2 ай бұрын
Just got my case (in white) today! This video got me excited to put my all-white build together.
@KogureDevilchan
2 ай бұрын
The quality of your productions keeps going up. Good work!
@bossik9649
2 ай бұрын
Great video and even better computer. The best channel about building computers. Greetings from Poland
@pangeranrio0112
2 ай бұрын
Awesome, once again! 🔥
@Mr_Matt_Lee
2 ай бұрын
Thank you 😘
@pangeranrio0112
2 ай бұрын
@@Mr_Matt_Lee you're welcome!
@techgirl517
2 ай бұрын
Ohaaa Matt, nice build! I love this case, this is finally something else.
@itzamedave6242
Ай бұрын
Awesome build as always you never disappoint ❤
@Askfornate
2 ай бұрын
Just bought a Corsair 3500X, but this was on my radar. Currently have my 2021 build in a iCue 5000X. Thanks for the content Matt!
@Bryle_
2 ай бұрын
Wow, this changed the norm of the Cases.
@DaLastSaiyan
2 ай бұрын
Well damn Mr Matt Lee, you've done it again!!!
@oem-mkii3041
2 ай бұрын
Thank You Matt again!
@henry3397
10 күн бұрын
Some cringe comments in here but excellent video as always my dude! The CPU and GPU having their own circuits is awesome. My main criticisms of the case after reading the valid comments would be the following: 1. The ugly GPU riser cable 2. The USB outputs and left sided glass panel force you into placing the case on the right side of your desk, if your desk is also in a corner as mine is, this could block off some exhaust 3. Not enough airflow over the Mobo, just that single 120 fan in the back
@blainehock754
2 ай бұрын
Lian Li is on one right now. Just banger after banger
@Sameer_Kitkule
2 ай бұрын
Lian Li seems to dominate the PC case market. These videos never get old, and I didn't know that the RTX 4080 Super would just as big as the RTX 4080. Great job, @Mr_Matt_Lee greetings from India!
@danieldegraaf
2 ай бұрын
I love your choice of music. I can look to your video's without seeing them. ☺
@Aly36917
2 ай бұрын
Very creative , I congratulate you for your talent !! The best indeed🎉
@Rayjockey
Ай бұрын
Good to see Kingston kc3000 still doing fine in todays's builds! 👍
@Jasontyo
2 ай бұрын
Something truly unique. I really dig this.
@5mongmong89
2 ай бұрын
Wow , GPU Intake😮
@Brzina77777
2 ай бұрын
Great video,like allways. Interesting concept...probably the direct fresh air in the Gpu is a great thing....the case seams compact , what i personaly like. Myb the only small thing i dont like is the exteranl exhaust fan. Thx Matt,continue like this👍👍
@Zombie101
2 ай бұрын
That outtake cracked me up 😂
@davimachado8475
2 ай бұрын
Ficou bacana a GPU colocada na frente do gabinete!!
@Sergio-it7ix
2 ай бұрын
Directo desde el canal de Sumo Computación que nos recomendó tu canal. Saludos desde Argentina :)
@NeuroViktori
2 ай бұрын
unique brand, unique builder
@user-Human-777
2 ай бұрын
Thanks for the video!!! Special thanks for the music!!!!!
@barracudabg01
2 ай бұрын
This is going to be a dust buildup nightmare. Aesthetically it's also not for me , but each to their own :) Great content , as always !
@SniperPFL
2 ай бұрын
Rear fan as intake results in a positive pressure setup. Fan curve of exhaust can be adjusted if required.
@henry3397
10 күн бұрын
@@SniperPFLthe rear fan is unfiltered, and it is the only unrestricted intake. The other intake is the GPU, which is restricted by the GPU heatsink. There is no way this has positive pressure. This case will indeed be a dust nightmare, but I suspect the cooling is adequate
@keiplaysgame
2 ай бұрын
lian li keep comin with a weird but interesting design!
@adamtargonski
2 ай бұрын
UR simply an artist
@NextGenCeoTV
2 ай бұрын
Thank you so much. Interesting PC case :D
@xsselb
2 ай бұрын
gone are the day of a cup of Joe and a relaxing build, now is the time installed strobe lights and dance shirtless to the build " I feel dirty"
@chiapet101
2 ай бұрын
where can i buy that coffee cup matt? keep it up, your videos bring peace and serenity to us gamers!
@Garde538
2 ай бұрын
Im here for the good tunes, I feel 26 again and out all night
@miyuki370
2 ай бұрын
that case is lit 🔥🔥
@JonnyBravo0311
2 ай бұрын
Interesting airflow... intakes through the GPU and a single fan externally mounted on the back... exhaust through the AIO and an additional 3 fans mounted behind the MB. I mean, I can see by the visualization that it is indeed exhausting the air, but I don't know... can't wrap my head around it. Definitely an interesting concept, though.
@thejerrymobile
2 ай бұрын
I was waiting for this one! There is so much potential in this case meta, and I can’t wait for them to make a V2. The airflow pattern is weird to say the least, and I can see some problems occurring if it’s parked too close to a wall. But is it worth it for the high mid tower design aesthetic? Time will tell.
@sergione371
2 ай бұрын
Great video and build, but I don't agree about the choice to use this particular motherboard only. This case is specifically designed to be used with a mobo that has back connectors, and would have been very interesting to see a build process like that...
@henry3397
10 күн бұрын
Like which?
@munsamma
2 ай бұрын
Awesome build, wish you tried back-connect with this, I'd love to see that look on this case!
@timkey87
2 ай бұрын
Don't your think it would be a better idea to do intake for AIO so radiator gets cool air directly from outside instead warm air from inside and GPU. For 7800x3d it probably doesn't matter cuz it's a super cool CPU anyways but for monsters like 14900 I think it would make sense. Thanks 🙏
@henry3397
10 күн бұрын
The AIO doesn’t intake the Gpu air, that’s what the 3x120 exhaust is for, to get rid of the GPU hot air. The AIO intakes from the back of the case, and as you can see from the visualization, it’s getting plenty of airflow
@CyberNawaf
2 ай бұрын
Well this is masterpiece!!
@ahernandez4695
2 ай бұрын
One problem fans on GPU are hardly on so there's a crap load of negative pressure = dust AKA HOT MESS
@gleipnirfenrir
2 ай бұрын
it has intake from the back, that back fan goes front and back of the motherboard
@HardTimesUK
2 ай бұрын
The aesthetic of this case has really grown on me. What are the noise levels like Matt?
@skyunn
2 ай бұрын
The Wi-Fi dongle saying "Hi!" 😆
@Mr_Matt_Lee
2 ай бұрын
@@skyunn wifi dongle for rear fan sticky outy scale 😂
@FlamingTX
2 ай бұрын
For a second, I thought you're gonna spit your coffee in that intro This might be a good idea for next intro or maybe not, idk
@henry3397
10 күн бұрын
How does the motherboard get any cooling??
@nihren2406
2 ай бұрын
Are there any issues with motherboard cooling on this board? The airflow visual almost made it seem like barely any air even with the rear intake passed over the board. Just immediately got sucked to the back. Also does that rear fan bracket fit a 30mm fan like the T30? I'd also love to know if the Lian Li Hydroshift could be adjusted to work with this design since it's default out of the box config might not be long enough. Maybe undo one management bracket.
@hornmanath4215
7 күн бұрын
my fri gave this case to me with a z790 stix h. at first i don’t like the case but the more i look at it the more i like it idk why 😂
@deamooz9810
2 ай бұрын
that is certainly unique
@무스탕-c3i
2 ай бұрын
WoW... Oh.. WoW....
@xanderoptik
2 ай бұрын
Excellent video. I'm considering this case to move into a little more compact set up. I'm a little concerned about fitment of multiple cables to my GPU, though. I run 3 displayport cables with my set up - do you think there is enough room to make that happen?
@xanderoptik
2 ай бұрын
In case anyone in the future is wondering it is totally feasible to run 3 or 4 cables through this case to your GPU, it's just a little bit fiddly to do.
@CasualGamerPlays
2 ай бұрын
@Mr_Matt_Lee, thank you for all of the comp build videos you do. I have a question, do you ever do giveaways with these builds or are these builds for friends, family, and or fans of your channel?
@laventeinn
2 ай бұрын
Wow this is such a clean build! Another banger from Matt as always. Never though the gpu is used as the intake, another unique thing comes from Lian li! But what about the thermal of the cpu? It feels a little... out of place for me seeing that only one fan acts as the intake toward the motherboard 😳
@Mr_Matt_Lee
2 ай бұрын
Pinned a comment with a link to our writeup where you can get more information :D
@AscendancyCOC
2 ай бұрын
Love from Philippines 🇵🇭
@АлександрГригорьев-н9з
2 ай бұрын
Спасибо за видео и за вашу работу
@richtea7868
2 ай бұрын
Looks amazing but is the single back fan actually doing anything? Hard to see on the airflow
@HELL_HOUND13
Ай бұрын
Amazing build!! what is the name of the song for the intro, also where do you get your music!!! i love it!
@jasonwong6693
2 ай бұрын
Another stunning build. Where can I find your playlist for your videos? Or as a musician, are you creating the music for your videos?
2 ай бұрын
wow GPU intake? Mild boggling and revolutionary.
@Afit4.5.0
2 ай бұрын
6:10 For God's sake, support the motherboard with your finger when connecting the power cable.
@henry3397
8 күн бұрын
I thought I was the only one that noticed he flexed the shit out of the PCBA there lol
@Dodger_Dawg_
2 ай бұрын
I have a question, did you turn up the speed on the fans on the GPU to get it to work better as an intake? And I like the write up on the build. Would be cool if you could do this "ASMR" and one where you maybe do a voiceover explaining things.
@Star_Gazing_Coffee_Lover
2 ай бұрын
Where you get that rock n roll desk lamp?
@christiandreyer8506
2 ай бұрын
👌very nice build
@giff74
2 ай бұрын
Something different, that's exciting! How are those CPU temps with the cooler in the back?
@chicopm
2 ай бұрын
Well, that is difinitively different!!!!
@snxc1627
2 ай бұрын
Super cool case and lovely visuals as always Matt! What's the name of the first song you used btw? Can't get enough of it
@ernstryan1
2 ай бұрын
I really wish we could see how you connect cables to the graphics card. Thats the only thing giving me pause before making this my next PC build.
@philippefischer7324
Ай бұрын
This will look awesome with my 7900xtx nitro +
@CarlWheezer97
2 ай бұрын
using 6 exhaust fans and only the three fans from the gpu as intake, would'nt this cause negative airflow?
@ahernandez4695
2 ай бұрын
AGREED LOL
@ItsTharvas
2 ай бұрын
not negative airflow but negative pressure, means air is sucked through all the mashes.
@henry3397
10 күн бұрын
It’s absolutely negative pressure
@CarlosDeBernardMrAgapi
2 ай бұрын
i really want to get that case when is possible. let see when the local stores bring one.
@waseembutt8614
2 ай бұрын
Nice case and build - another great vid!!
@sergiohidalgo9783
2 ай бұрын
OH YEAH ❤🔥❤🔥
@edengate1
2 ай бұрын
Where you find these incredible musics?
@noitora99
2 ай бұрын
It would be great if you put a pcpartpicker list in your description as an alternative 👍
@publicenemy7923
2 ай бұрын
Yo, this case looks really intersting. Wanna see build w/ this case and Back-to-front motherboard and gpu
@FanaPants
2 ай бұрын
Coffee in hand, work on pause, headphones on, Mr. Matt Lee on the work monitor! Best part of Monday - Lets go! :)
@Mr_Matt_Lee
2 ай бұрын
This comment is THE most wholesome
@Venicece
2 ай бұрын
Gorgeous! Where coffee...☕ ^^
@iDiogoRenan
2 ай бұрын
cinema
@komakie
2 ай бұрын
I'm wondering what you do with all the rigs you build. And do you have a certain thing with some brands like Kinston and Asus? Because you use a lot of those parts. Just interested :)
@muge11o
2 ай бұрын
Thanks!
@Mr_Matt_Lee
2 ай бұрын
Thanks so much for the support 😄🙌
@muge11o
2 ай бұрын
Epic vids - keep up the good work! 😎
@MrRyanfisher
2 ай бұрын
Great build. Definitely an interesting case.
@Mr_Matt_Lee
2 ай бұрын
Absolutely! It was a really an awesome build experience too!
@MrTayda
2 ай бұрын
amazing perfect
@ben_jay73
2 ай бұрын
How come you've never posted a vid with the FormD T1?
@michaelbowers5675
2 ай бұрын
Kinda on the fence with this case nice build though I think I would like this case with a project zero or other back connect motherboard since theres no graphics card in front of mobo to hide cables with this setup
@LapplandEnjoyer
2 ай бұрын
It looks kinda.... wierd. Nonthless it looks awesome. It reminds me a bit of the SSUPD Meshlicious S. Both are more vertical than horizontal, both have their GPU "standing" and both have a tempered glas panel. Especially when you put back the front and top cover.
Пікірлер: 298