My dad had a 070, which was the saw I used growing up...and that saw sounds just like it...
@577buttfan
4 жыл бұрын
Yeah funny thing is todays 0.36 would piss all over it..but it does look cool!
@tonykemp4645
3 жыл бұрын
Great review on still clone chain saw the 070 did very well for you just loved it
@Lanninglongarmmowing
7 жыл бұрын
Very cool. Love the sounds of this new old chainsaw. lol.
@KimballCody
7 жыл бұрын
+Love2boat92 I can't wait to mill with it.
@hotdognonesky3766
6 жыл бұрын
As someone who used these saws 30 years ago, I can tell you that this is the same thing as the original. Chain brakes came as an option in the 80s and this saw predates them. I was running an 064 without a brake when I was 13 and logging in northern Michigan. I'd love to have the info on these because it appears to be taken ove r because it's old technology and the Germans won't make them any more. This would be perfect for milling! No brake required. That being said, chainsaw safety is one aspect of my profession and I have to say, do not ever run a saw with a chain that loose and it's especially dangerous to cut with the tip.
@KimballCody
6 жыл бұрын
+Hotdog Nonesky i sold this one. Check hutzl.net they have kits. I'd go with the 660 clone first
@X737_
4 жыл бұрын
The Germans didn’t make it, it’s a Chinese fake
@romeoharold2183
2 жыл бұрын
i dont mean to be so offtopic but does anybody know a trick to get back into an instagram account..? I was dumb lost my password. I appreciate any tricks you can give me
@kaisergrady3681
2 жыл бұрын
@Romeo Harold Instablaster ;)
@romeoharold2183
2 жыл бұрын
@Kaiser Grady I really appreciate your reply. I found the site through google and Im trying it out atm. Takes a while so I will get back to you later with my results.
@Jimj
5 жыл бұрын
Great for milling and you can't beat the price
@guypatts494
5 жыл бұрын
This saw rocks I been running one for months with 36 inch bar saw is a beast
@samuelalbritton2224
5 жыл бұрын
Guy Patts does the not having a kick back bother you?
@samuelalbritton2224
5 жыл бұрын
After I read about not having a kick back I’m a little nervous, should I be
@guypatts494
5 жыл бұрын
It dont bother me at all
@billgreene7456
6 жыл бұрын
Luv that 070...understand you sold it...I have the ms381...have used it a lot...large oak and Ash down...Alibaba is good but shipping outrageous...saws quality very good though...done everything I've asked of it...run 32 to 1...make sure bar is clean...oil holes clear...great power...cuts right through 24 inch plus wood...enjoy your videos...before I ordered mine watched Walt...you and others...keep up the great vids...
@KimballCody
6 жыл бұрын
did you assemble yours?
@billgreene7456
6 жыл бұрын
No...all assembled with 20 inch bar and "stihl"chain...started up..cright away...4 pulls...have cut lots of wood...very good performer...90 Oct gas...stihl synthetic...32:1...Alibaba...Jianzing Norsun tool co...Seasummer brand...really enjoy your vids...inspired by you to get the831 as a replacement for my old 028 wood boss and newer 52cc unbranded clone saw. Thx Kimball...bill g
@BulletproofPastor
6 жыл бұрын
There was a day when no one would buy "Japanese Junk" complete with the comments that everything was made out of US beer cans. Today... Honda, Toyota, Mitsubishi, Sony, Hitachi, and several others are leading the quality pack. China has come a long way and today they are producing some high quality products at great prices. You can still buy cheap Chinese junk but I've seen some trashy "Made in USA" junk too. One of the best deals on pianos is the Pearl River. Made by license through Yamaha it has incredible sound and at a very attractive price. Our church bought one and has never regretted the decision. It's made in China.
@KimballCody
6 жыл бұрын
This is what I've been saying for a long time
@StrokerAce3983
5 жыл бұрын
But this is a fake "knockoff" Stihl saw. China doesn't have the rights to manufacture Stihl products.
@michaelqendro9825
5 жыл бұрын
Stihl set up a factory in China back in 2006 to make their stuff.
@tj4bats100
5 жыл бұрын
All those products are made in Japan not China
@michaelcollins1899
5 жыл бұрын
Except u speak of japan, not china lol
@mikehenry4743
7 жыл бұрын
These are awesome saws. I am actually using one to power a small home made ultra lite air craft.
@KimballCody
7 жыл бұрын
thats awesome....got any videos?
@KowboyUSA
7 жыл бұрын
KimballCody we'd both like to see that.
@localcrew
6 жыл бұрын
Harrison Ford -- do you really think that's a good idea?
@jeffferguson899
6 жыл бұрын
wow trusting you life to a Chinese motor. that is ballsy
@Hammerjockeyrepair
6 жыл бұрын
Why, with todays technology, they have small reliable 4 stroke engines for this purpose. You dont want this rattlebox behind your head!
@NathanVdV
5 жыл бұрын
i am quite amused by all the responses here :D most of them either know shit about these saws and need to do their homework before commenting and the others are just bashing the chinese quality without actually knowing how good these saws are build (getting better each new release). so to sum up : it does not have a chain brake cause its a copy from the 70's, it is chinese but value for quality is top notch. ive milled some serious acacia wood with my 070 and it did not skip a beat. runs a 36" like its a 16". will it break ? eventually yes, parts are cheap and plentyfull. so 300 bucks (is what i payed for it) for this monster is dirt cheap and 6 months later and more then 50hrs on work time i can say it is still having insane compression and starts every 2nd or 3rd pull. there you go.
@mikepruett1745
3 жыл бұрын
how much are these
@NathanVdV
3 жыл бұрын
@@mikepruett1745 I bought mine for 340 (including import tax) at the door. that's now 2 full years ago. still starts at 4th pull. has done its fair share of milling and big tree cutting.
@mikepruett1745
3 жыл бұрын
@@NathanVdV ty oh where from ?
@georgedavall9449
Жыл бұрын
Great Comment Nathan!
@islamicmotivationvideos295
2 ай бұрын
Please what are the disadvantage of the Chinese 070 power saw
@johnwells7931
6 жыл бұрын
Looks like a good saw to me !
@redneckeliot032
7 жыл бұрын
Wow!!! :) an antique in brand spanking new. This saw was made around the 1970s or 1980s not sure yet. I whish I had one...
@happycamper2976
3 жыл бұрын
looks like a china copy of 070
@t.r.766
2 жыл бұрын
I still have my dad’s 070Av it’s a beast. Only run 40:1 VP FUEL HE Brought it back in his suitcase. It’s made in West Germany 🇩🇪 yours sounds similar it really doesn’t start working until you put a load on it then it just humps the chips!
@jonathanbenoit8828
3 жыл бұрын
Its too pretty, to even start, super nice 👍👍👍👍
@laars8015
7 жыл бұрын
Chain is scary loose 🙀
@scottfoster2487
6 жыл бұрын
Not at al ,this is a hard nose bar so they have to be run looseer do to no roller tip.
@ronaldhickman9953
6 жыл бұрын
La Ars ......way too loose......danger !!!
@racecarwayne
6 жыл бұрын
Solid nose bar always run the loose otherwise you will destroy the bar in a hurry
@andreas1983x2
5 жыл бұрын
@Wayne Schneider But soo loose?
@racecarwayne
5 жыл бұрын
@@andreas1983x2 on that long a a bar yes that's y solid noses have been largely phased out it is easy to toss a chain if your not careful and I doubt a saw of that vintage has a catchers
@pushpushlambert8079
6 жыл бұрын
Sounds better than my MS 290 !
@hotdognonesky3766
5 жыл бұрын
The 290 is fine for an occasional cut here and there, but it isn't a good saw. You'll notice it in comparison videos a lot because it's tuned down for the farmer and it makes the other saws it's being compared to look superior. It's built to go slow and just never die. Example, The ms 270 is the first in professional grade saws and it will flat out kill the 290. If you want a really good saw I suggest the ms 362C. This thing is the best all around saw ever made. Expensive, but worth every penny.
@1keykneedeep
7 жыл бұрын
Nice saw. I had the real deal German product and they differ in quality but sound exactly the same. Shocked me when you started it up.
@manoman0
6 жыл бұрын
Well, what do you think is the engine inside a real STIHL?
@zoranilic9450
6 жыл бұрын
1keykneedeep you are stupid
@hotdognonesky3766
5 жыл бұрын
@@zoranilic9450 He's stupid because they sound the same? I think you need to look inward, sir.
@semco72057
6 жыл бұрын
I noticed that the chain isn't tight enough on that saw, and secondly, i didn't know that Stihl made saws in China. It seem to work fine, and if it gives you great service then you don't have to worry about who it is made by.
@craigjones1115
6 жыл бұрын
Just needs to adjust the high side screw in while under a load till it smooths out. You can adjust in without a load on it and it will end up too lean.
@joeleek2619
6 жыл бұрын
The farm tek saws aren't too bad as long as you know saws and don't mind doing a touch of mod. We will see if it holds up the similar.
@twagner6155
4 жыл бұрын
I just bought an Ojenas 070, 105 cc that is almost like yours and it started up real quick. We will see how it works when the 36" bar gets here.
@twagner6155
Жыл бұрын
This saw is not so great. I took it to a Stihl repair shop and they wouldn’t touch it. It stopped running after a few months.
@twagner6155
Жыл бұрын
The clutch fell off and messed up the left hand threaded nut, the crank threads are messed up.
@yamahaedd
6 жыл бұрын
Step away from the chainsaw you don't know what you're doing you're going to get yourself hurt that chain is too loose
@pallmall5495
6 жыл бұрын
never run a chain tight on a hard nose bar,or else you will smoke it.
@Tonnsfabrication
6 жыл бұрын
It's a new chain that is going to stretch in the first real cut. You should not see the drive links dangling regardless of the bar's nose. A loose chain is dangerous.
@pallmall5495
6 жыл бұрын
wrong
@brianhanlon9602
6 жыл бұрын
Southeastern Ohio Honeybees is correct.
@pallmall5495
6 жыл бұрын
wrong
@03bonneville
7 жыл бұрын
Junk made in China....You might want to learn how to adjust a chain.
@thealmightybungholiofather8486
7 жыл бұрын
03bonneville I agree the Chinese can't make shit
@asbestosfiber
6 жыл бұрын
Ipad I phone
@1995dresser
6 жыл бұрын
Hey I work on all my Saws on the Kitchen Table. its just a little awkward at Dinner Time
@jtbassgambler2594
6 жыл бұрын
03bonneville you are truly idiot
@jtbassgambler2594
6 жыл бұрын
03bonneville you mad because sthil is junk
@InsideOfMyOwnMind
3 жыл бұрын
I have one of these. It runs well. The clutch cover came cracked out of the box The kill switch is backwards. You should be able to kill it with just a push but you have to reach around and pull to stop the engine. I had to turn up the chain oiler a bit and after break in this thing is a beast for better or worse. There is no chain brake so don't get into a situation where you need one. In the current iteration the STIHL word does not appear on the product, just the 070. The 7/32 file is what fit my chain. Found out early on cause we dirted it. I don't plan on keeping mine because I can only imagine what it's going to be like getting parts for it. I just had a job to do and now it's done so yeah.
@singlended
Жыл бұрын
Parts are plentiful.
@InsideOfMyOwnMind
Жыл бұрын
@@singlended I have since discovered that. But alas it now has a new furever home.
@singlended
Жыл бұрын
Bad luck but probably safer without it.
@the1chainsawguy
7 жыл бұрын
Very Nice! Did you happened to examine the chain closely? Stihl marks the links. I have seen them referred to as OEM in the built category and it would seem reasonable that Stihl produces chains and bars in China, it would be nice to hear if that silver box was warranted. Stihl still produces a few consumer saws there. Huztl is going to release a 070 kit in the near future and after seeing yours I look forward to getting my hands on one and put one of their Holzfforma Portable Chainsaw Mills on it and see what happens. You are in that position now. :-)
@KimballCody
7 жыл бұрын
I hope to make a milling video with the 070 and their mill by next week. I have a few 8' mesquite logs that I need to mill up. The only problem is I don't have a ripping chain for it.
@johnnybarbar7435
7 жыл бұрын
Grind some semi chisel to 10/50/-10 and go for it. I you don't have the setup for making chain and regrinding to mill profile, shoot me a message with your info and I'll fix you some up for cost.
@jacquesblaque7728
7 жыл бұрын
Experimentally, I've found full-skip semi-chisel, filed as for crosscutting, to work just as well as ripping chain for milling hardwood. KISS. And ... how can OP call a pirated copy a "stihl"? (No stihl fanboy here.)
@andybub45
7 жыл бұрын
STIHL guidebars and chains are made in the US.
@MrMorrison8118
6 жыл бұрын
stihl chains and bars are not made in china
@LeifDjurfeldt
4 жыл бұрын
Awsome!!!!
@kbrich2002
7 жыл бұрын
Man that's exciting.
@KimballCody
7 жыл бұрын
+Kevin Richards I'm excited to mill with it
@kevinhoward1745
4 жыл бұрын
I hope emts are on stand by
@TigaPutraWoodworking
Жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍👍
@elizabethtaylor9321
5 жыл бұрын
If it is built like the original 070 then fine , I worked one in the late eighties to cut some huge Sitka spruce, Ok it wasn’t the most comfortable saw to work but it got the job done, I bought back then second hand for £ 100. They were called Stihl Contras, made in South America, tough old brutes , to buy the same size engined saw new today you would be looking at around £1500 ,so for an saw that’s only part time use it’s the the way to go.
@bwinford1561
6 жыл бұрын
For all of you dissing China, how many of went to Walmart last week?
@KimballCody
6 жыл бұрын
+B Winford or are talking crap through their chinese made phones and computers
@bwinford1561
6 жыл бұрын
Found a 58 cc on ebay for $91. Score!
@cody_janssen831
6 жыл бұрын
But theirs a difference between buying dinner for the week and buying a chainsaw
@bearbait2050
6 жыл бұрын
I do not ever shop at Walmart.
@bearbait2050
6 жыл бұрын
Reminds me of an echo weed eater, they are very hard to start.
@Liam.caliber
3 жыл бұрын
"Ya'll watch this kickback!"
@joshn9069
6 жыл бұрын
Been looking into these clones for milling and the occasional big tree job. Very conflicting info about them. Yours seems to run quite nice and decently tuned from factory. Random, your yard reminds me of west Phoenix.....the wall, trees, and houses are identical.
@nospam3409
Жыл бұрын
I know this is an older video and comment, but figured I would give my feedback anyway ;) My understanding is that the bigger Huztl saws have gotten a lot better in the last 2 or 3 years. My 064 seized up on me this spring so I ordered a G660 to take its place. $321 delivered. It came from US stock and arrived in 2 business days. There was about $50 worth of hardware that I needed to replace on it up front, including a high output oiler (running a 42" bar) and a dual port muffler cover. It's a screamer now. Heavy enough that I wouldn't want it to be my primary saw, but for the occasional big tree, it was a great fit for me. If I were milling big logs with a chainsaw mill, I'd definitely have a G070 for the job. The only question would be whether to change out the P&C to 66mm and retune to make it a 135cc 090.
@bloodgt3
5 жыл бұрын
Did you like this saw. Or would you say the farmertec g660 is better quality. Im trying to decide which to get. Also where did you fi d this saw. Thanks
@robo5677
6 жыл бұрын
You look like that kid off of that show malcolm in the middle 😂
@pallmall5495
6 жыл бұрын
Is the carb adjustable on these saws?I hate to admit it,but im getting interested in these clones.
@terrydutton943
5 жыл бұрын
I love it where can I get mine. ?
@mr.partyman1244
5 жыл бұрын
I herd the chainsaws with 0 in front of them last forever and r really reliable
@kevinswanson3910
5 жыл бұрын
like the farm tec saws
@cyphrr
6 жыл бұрын
Holy shit, I was waiting for the chain to fly off
@KimballCody
6 жыл бұрын
+cyphrr it did
@cyphrr
6 жыл бұрын
You still got the saw? And if so, how has it held up? Just curious.
@WZDIESEL
6 жыл бұрын
im glad to see im not the only one that spills oil all over the saw when i fill it
@bluelude2001
6 жыл бұрын
dilligaf put your bar oil in an empty 56 ounce dawn dish soap bottle. Works perfectly.
@WZDIESEL
6 жыл бұрын
bluelude2001 I’m not sure that would work in colder conditions
@Tonnsfabrication
6 жыл бұрын
Or you could just turn the jug on it's side so air can get in and never spill a drop ever.
@lucfournier3939
6 жыл бұрын
Southeastern Ohio Honeybees yeah hé showed poor technique à funnel also works great
@charliebrown4007
7 жыл бұрын
were did you buy your sthil copy made in china and how much you pay for it im asking because id like to buy one
@faolancronk7067
5 жыл бұрын
The chain is so loose and slow, you can literally see it moving.
@TriggerArizona
6 жыл бұрын
I'm an Arborist and I own quite a few actual Stihl saws. I make a living with Stihl's awesome quality and power. (I'm still bent at Stihl for replacing the ms200t with the lesser ms201t). I'm interested in any saw if it runs decent and I can depend on it. I'm not interested in supporting knock-offs and fakes per say, though it if runs decent, what the heck. Lots of haters making comments below. I do not know what these Chinese copies cost, though if they run good and they're cheap, I may buy one and run the hell out of it for 3 or 6 months.
@KimballCody
6 жыл бұрын
+David Scalise I'm not impressed with the 070 clones. Heavy and vibrates like crazy. If you're wanting to experiment with a clone get the 660. Both cost around $300 each
@usaisalwaysnumber1
6 жыл бұрын
David -you don't want one.you cant depend on them.they come apart very easily.you certainly caouldntmake a living with a huztl piece of cheapo junk..
@miriamdumbleton4280
6 жыл бұрын
Hi David. I have a mate who does up 090, 070's for sale. He sometimes gets chinese bits, plug caps, as are unique to model, but, he says the new chinese copy isa no good. Bought one, set it up, ran in gently, then it blew. . . The real thing will run all day, as u know. Yes, i was annoyed about ms200 replacement, too. But my 200 still great. Instead of the new070's, have u considered/got/used, an 07? Very similiar to 070, weighs 18 lbs, 4 an half horse, lots of torque, early 60's Stihl made them. I have two, long an short bars on. Lovely things. Ok, vibes, LOUD, but never fail me. Drop it on concrete, no break. Y'health, Mark.
@willietheboggle3954
6 жыл бұрын
Bro.... come on now. There’s a reason you have been buying the good stuff. Dad said once, “I’m too poor to buy cheep tools”....
@mikelyons7511
5 жыл бұрын
Doesn't run very good but at least you have the chain adjusted spot on. LOL 🤪
@Machinesvehiclesvariouscontent
Жыл бұрын
bela máquina , sem dúvida esse é uma cópia do modelo original com did^fenças, os materiais são de menor qualidade em relação aos originais.
@airborneexplorer
5 жыл бұрын
I would like to know how it's holding up 1 year later? Is it worth buying? The price is good might want one just to have it and not use much.
@carlshealy5839
6 жыл бұрын
who are you buying from ? i find it tough to get a reply about a single unit , they seem to be only interested in larger sales
@stevenjeffreys2843
5 жыл бұрын
I took a chance on one of these Chinese 070 saws it lasted less than a week, broke in gradually plenty oregon oil at 25:1 as advised rather than the regular mix of 50:1 no it didn't smoke like hell it ran fine I gave it a bit of work no problems other than the clutch slipping if the chain runs itself to tight when hot, "trial & error" used a 36in quality stihl bar & chain, oiler fine & additional thumb oiler fine if your thumb is 6in long! it's heavy as hell but ok for cross cutting at it's own pace, what happened? the big end collapsed whilst idling no less! cemi locked & theres the usual debris wedged between piston and barrell, now needs a total rebuild with quality "NON CHINESE" barrell/piston & crank, one day! UK
@KimballCody
5 жыл бұрын
I didn't like mine either. Heavy, vibrated and spit out the decomp. The 660 is a lot better
@robertlivingston1634
6 жыл бұрын
I. Bet the little husqy sitting next to it will cut circles Around it looks like 1980s vintage, no chain brake.
@charliebrown4007
7 жыл бұрын
how much you pay for your chain saw and were can i buy one
@jonathanbenoit8828
3 жыл бұрын
Nice 👍👍👍👍,I have the only after that one, beautiful and, beautiful, saw
@junglejonny1000
5 жыл бұрын
Do they make a 50 to 60 cc version? Can you give us a link please?
@rodneywroten2994
6 жыл бұрын
why did you decide to go with a no roller tip bar?
@andymcdiarmid656
5 жыл бұрын
Where did you buy your saw from thanks and do you have a link
@theloosemoose8200
6 жыл бұрын
Sounds awesome ? Sounds like a pos moped.. pull the slack outta that chain before it comes off and takes your lips off
@KimballCody
6 жыл бұрын
+mason chase I sold it because it wouldnt stay tight
@theloosemoose8200
6 жыл бұрын
KimballCody good move, that was dangerous...
@ic2171
4 жыл бұрын
Thank you for making this video. Where did you order from?
@rowdyropp7464
6 жыл бұрын
Looks like it needs a little tweaking, a little running. The Stihl 076 Magnum is one mean long bar lugger! Might not be super fast but you can hardly lug them if they are dialed in right. For the money, id buy a few!
@EfstathiosOuranitsas
7 жыл бұрын
please give me the link where did u buy it from?
@adambatchelder4121
6 жыл бұрын
I like old saws and that's a easy way to get a clean wall hanger I guess. But I would hold out for a original.
@KimballCody
6 жыл бұрын
I ended up selling it
@MtrePierre
6 жыл бұрын
just a question about the handle; that's transport stabilizers or reinforcement bars?
@KimballCody
6 жыл бұрын
+MtrePierre reinforcement
@AshleyAuliye
7 жыл бұрын
is the 300 still available?
@bobbyharper8710
4 жыл бұрын
That sparkplug wire doesn't knock the fire out of you?
@samuelalbritton2224
5 жыл бұрын
Why did you sell this one? What parts could I replace oem that would make you consider keeping it. Last question do you think the 660 clone mills just as good as this one
@KimballCody
5 жыл бұрын
Slow, heavy and vibration. The 660 is easy to work on with parts easy to acquire
@heavenlyvibes7102
5 жыл бұрын
That's a great saw man don't let them hate everyone knows a new saw the chain stretchs let us know how long it last
@KimballCody
5 жыл бұрын
I sold it. Too heavy and vibrated too much
@jackblue4321
5 жыл бұрын
@KimballCody Where did you bought it from? Please share the link, thanks.
@KimballCody
5 жыл бұрын
Huztl.net
@happycamper2976
Жыл бұрын
helo were you buy your 070 sthil clone and how much you pay for the chain saws and bar
@poltergheist3388
5 жыл бұрын
Is a old model the 070 AV 😊 Chinese are sometimes pretty good cloner especially with old good product. Just sad they not added chainbreak. This model was a pretty big engine 105cc with a low rpm max above 8200 or 8500 giving 4.8kw at 7000 but tons of good torque. For me need 2 things change the contact switch for a smaller one and customise a light stainless steel plate as front hand guard. And please tight a bit your chain 3 drive teeth could go out when you pull on it after tightening on 1st cut after it had expand you can let 5 drive teeth to save a bit the guide. Depend of use. And good idea to directly put Still chain and guide , Chinese do nice engine parts but their chains are bubble gum. PS oregon work even better for me. 😁
@Hammerjockeyrepair
6 жыл бұрын
finally got to the point where it started lol, sounds as if its got the power of a 13" poulan from walmart
@the1chainsawguy
7 жыл бұрын
I just happen to recall this is the grandson of the Stihl Contra.
@KimballCody
7 жыл бұрын
I think you're right
@manoman0
6 жыл бұрын
Tighten that chain!!!!
@KimballCody
6 жыл бұрын
what chain?
@samlevas
6 жыл бұрын
Made in China like any other stuff we buy. What is the surprise?.
@richiej2640351
5 жыл бұрын
Yeah first thing I was thinking, damn tighten that chain up.. holy shit lucky the damn thing didn't fly off
@C69FH
5 жыл бұрын
Where did you order this from?
@dionmilton3829
5 жыл бұрын
I have a chinese chainsaw which is basicly a husqvana copy it goes great. I cant justify paying a couple of thousand dollars when u can get copies that do the same job for a quarter of the price.
@yeyolara6259
6 жыл бұрын
Is this a copy or just a stihl model made in China ??? It sounds like the carb needs adjustment and where is the chain brake ??
@kevinswanson3910
5 жыл бұрын
if this is 105 cc its a low rev motor be better in a go cart , the 92 cc version makes a great saw.
@NathanVdV
6 жыл бұрын
whats the screeching noise ? it doesnt sound right, you dont hear it anywhere only after 8:15 when you restart it after you fixed the on/off switch.
@KimballCody
6 жыл бұрын
+Nathan Van de Velde i think it was the fly wheel rubbing on the starter cover
@IHav2BlackCats
7 жыл бұрын
Now thats one cool saw. Is this one made by craftop/newtop on alibaba? Im wondering if its a good idea to semi disassemble it and make sure everythings installed correctly but it seems good enough in the few videos you've uploaded. I also wonder if it would benefit from base gasket removal. What was the wait on shipping?
@KimballCody
7 жыл бұрын
+IHav2BlackCats this one said 070, I've seen the craftop, I'm guessing they are the same. I'm not too familiar with 070 mods.
@IHav2BlackCats
7 жыл бұрын
I was trying to order one from craftop/newtop on alibaba and they want to charge 310 dollars for express shipping and 290 for the saw. Do you happen to have a link to the page you bought the saw from because half the price being shipping is hard to accept. And you mentioned 300 only.
@KimballCody
7 жыл бұрын
IHav2BlackCats try these guys. if you don't see what you want ask m.hefeiglory.en.alibaba.com/productlist.html
@JamesShaff-ys8kt
7 жыл бұрын
They are 430.00 free ship on ebay for the ms070 type that in the search bar.
@1d1hamby
7 жыл бұрын
James Shaff1911 that's definitely not worth it.
@jodyhardy8631
5 жыл бұрын
Good luck getting parts for it
@KimballCody
5 жыл бұрын
Really easy to find
@jodyhardy8631
5 жыл бұрын
@@KimballCody let me guess get them from stihl dealers
@robotman18
6 жыл бұрын
where did you get this?
@MrLedzepp88
4 жыл бұрын
How did the saw turn out since this video? Is it still running?
@KimballCody
4 жыл бұрын
I sold it. Too heavy. I mill with the 660 clones now
@jodyhardy8631
5 жыл бұрын
Buying one of these kit saws is like buying a radio controlled gas powered car ,putting it together getting it to run and h
@stephencorleymississippili4007
6 жыл бұрын
When companies order from or have goods manufactured in China, the products are made as ordered. They will make them as poor or good as you want.
@KimballCody
6 жыл бұрын
Good point
@user-ky3zu7tx6f
7 ай бұрын
Nice
@jessiecasteel2902
6 жыл бұрын
What did it cost.ship and handled total $
@jodyhardy8631
5 жыл бұрын
Oh yeh the rest ,putting it together getting it to run and hoping you can go pick up groceries with it
@gsxrlonewolf4088
6 жыл бұрын
Would you do a follow up video, I know there's alot of hate on here, that it isn't a REAL stihl, but I've been a logger for over 10 years now, and there isn't a bigger supporter of stihl out there than I lol. I have not only been using stihl, but collecting everything stihl and am considering just adding one of these to more than likely hang in the garage, but obviously use from time to time just because. But would love a follow up video of your opinion from when you bought it....until now
@KimballCody
6 жыл бұрын
+Mr. Stihl sold it Too heavy, vibrates too much. Chain wouldn't stay tight.
@brownwrench
6 жыл бұрын
pour oil with the opening at the top
@jovanovskidaniel
6 жыл бұрын
Where did you buy ?
@joebender3662
6 жыл бұрын
Everybody has a chainsaw story
@happycamper2976
2 жыл бұрын
were did you buy your chain saw and how much i want to buy one
@gatito000ferozz
6 жыл бұрын
where is the chain brake?
@KimballCody
6 жыл бұрын
+Gato Malvado remake of an old 1970s design that didn't have a chain brake
@gatito000ferozz
6 жыл бұрын
KimballCody thanks i didn't know that.
@fp3359
6 жыл бұрын
Your limbs will do the job...
@riverfishing3609
6 жыл бұрын
The saw is way to powerful for a chain brake
@cornedoevendans617
6 жыл бұрын
thats absolute bullshit
@ReinhardLins
7 жыл бұрын
No chainbrake?
@davereade4017
3 жыл бұрын
Were do you get from I would like to get one
@mossburg2010
7 жыл бұрын
don't look like it has to great of compression right out of the box. I have a west German 090 and a 070 (used to have 3 090's but I sold 2) on all the saws I had to always hold down the decompression valve button or they would not start or even let me pull them. also please adjust that damn chain!!
Пікірлер: 787