I was about to buy one but they are sold out when will you be getting more?
@carlkinsel6676
3 ай бұрын
AGT DM12X-C
@heathconder
4 күн бұрын
a trick to prevent the loss of fluid from the tank is put a shop vac on the fill without the cap on and it will hold it most in.
@isairislarosaperez1521
Ай бұрын
Hola necesito comprar un kit de enfriamiento es para una H12 cuál sería el precio gracias excelente trabajo educativo quiero ver también los demás precios de los accesorios gracias
@jimg2885
Күн бұрын
Went on your website that you mention on your videos and all items are marked out of stock. Even the pressure gauge. Will you be restocking parts? Thanks in advance and thank you for the informative videos..
@NischGTM
21 күн бұрын
Literally everything on your site is sold out 🙄
@GunHolsters
Ай бұрын
Your attention to detail and thorough explanations are impressive and much appreciated. Very nice kit and easy install.
@rustart
2 ай бұрын
Does this eliminate the need to install push and pull fans that most people are installing? Also, any confirmation yet that this will fork on the ratio/predator engine? Great channel, btw!
@larrythompson1597
12 күн бұрын
Do you have one for an agt
@publicEnima
11 күн бұрын
this guy is genius!!
@denslod2930
2 ай бұрын
Best time to add a float charger pig tail to keep your battery topped off when not being used.
@michaelsa892
Ай бұрын
Mine has a cooler but no filter do you have a solution for that situation
@stevejones5303
29 күн бұрын
Good morning, hey Michael, I have the same issue, want to add hydraulic filter, did you find one yet?
@michaelsa892
29 күн бұрын
@@stevejones5303 no not yet
@mariumabacha3198
3 ай бұрын
This is really a great kit and a good instructional video. I have learned a lot about hydraulics watching his videos.
@smca7271
3 ай бұрын
Top idea,pays for itself ,your hydraulics will thank you.
@DanielBradford1234
2 ай бұрын
Where do i get one of these kits
@jeremyyates8417
2 ай бұрын
Where did ya get the exaust extintion
@denslod2930
Ай бұрын
It was on the mini when new.
@josecarrasco8637
2 ай бұрын
Hi, I bought today a FF12. This kid would fit? If it does fit, how much would you think it would be a fair price to pay for installation in a local shop here in GA? Thank you.
@Paul-oh7we
2 ай бұрын
Hi, just bought an FF12, and it has a hydraulic filter mounted behind the seat in the engine compartment. Also, my hydraulic tank is mounted under the floor on the right. Would I need this kit or just install the fan kit. Thanks
@denslod2930
Ай бұрын
I think 27mm wrench is the same as 1-1/16"
@skeller0160
3 ай бұрын
I have the AGT QH12R with the R420 engine (not the briggs engine). Will this cooler/filter kit work for this one? Ive noticed on mine the psi rating of the hydraulic hoses are 7000 psi and on the H12R they are rated for 5000 psi.
@thegarageconnection
3 ай бұрын
It “should” work
@mbredline7603
2 ай бұрын
Just a note, mine didn't come with a notch, I had to cut that out
@MichelClavette
3 ай бұрын
Another great video Cam! Two questions: 1- I have mostly seen machines where the cooler is installed after the filter in the return line. Can you comment on the pros and cons of each approach? 2- Can you make a video that goes into the specifics and explains how the different components of a dual circuit pump with flow divider valve (with safety solenoid, accumulator and filter) and joysticks operate on machines such as the H15?
@thegarageconnection
3 ай бұрын
1) The filter being at the very end of the system ensures all contaminants are removed prior to the fluid entering the reservoir. If the filter was first, then potentially the cooler could have particles inside it that would be sent directly to the sump.
@1tampa573
2 ай бұрын
Need a kit for a H13R. Do you know if this will fit? Also were would one go to purchase this I tried emailing you email.
@thegarageconnection
2 ай бұрын
The H12 kits fit
@sebastienbrassard4275
2 ай бұрын
can you ship to canada
@karlemond5138
3 ай бұрын
Is it an din L18 m26 x 1.5 on de return hose or m27 x 1.5 tanks
@thegarageconnection
3 ай бұрын
It’s an M27
@charlesfellows8130
2 ай бұрын
Kit for mini skid?
@jimd421
3 ай бұрын
How much for kit
@thegarageconnection
3 ай бұрын
Centraldiggersupply.com $400
@gregorylane4684
2 ай бұрын
When do you think you will have more of these kits?@@thegarageconnection
@stevendunn6255
3 ай бұрын
Disconnect - battery terminal before doing any work on machine. That + battery terminal is a major short hazard.
@thegarageconnection
3 ай бұрын
The battery disconnect switch makes the chassis ungrounded. You can tough the positive directly to the frame all day long and there’s no current path to ground
@stevendunn6255
3 ай бұрын
@@thegarageconnection , Agree the switch does cut the connection to ground. I have seen three switch’s fail . Something to think about in an instructional video….
@zoart9335
3 ай бұрын
Great Job!!!!
@carlkinsel6676
3 ай бұрын
How about the new ACT DM12X-C
@thegarageconnection
3 ай бұрын
Don’t have one here to prototype a kit on
@noone7937
3 ай бұрын
I NEED FILTER KIT FOR L12
@thegarageconnection
3 ай бұрын
I don’t have an L12 to verify fitment
@normhowes2975
3 ай бұрын
WOW! What a well thought out kit with one of the best step by step instructional install videos I have ever seen. Great job. Almost makes me wish I had a gas unit instead of my 1.5T diesel. Nah, I'll keep my diesel lol
@mp-xt2rg
3 ай бұрын
This is like putting a $10k turbo kit on a Honda. Makes Zero sense.
@shaunbroadby4757
27 күн бұрын
Or is it like putting a catch can on a 10k Honda engine, which makes perfect sense
@mp-xt2rg
26 күн бұрын
@@shaunbroadby4757 At no point in your rambling, incoherent response was there anything that could even be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul.
Пікірлер: 50