Hello, my servo can be moved by hand and when I turn it back to the point. I need you to have more strength and not move. you know what parameter you have to adjust hola, mi servo se puede mover con la mano y cuando lo sueto vuelve al punto. necesito que tenga mas fuerza y no se mueva. usted sabe que parametro hay que ajustar gracias
@SKCCNCROUTERBATAM
4 жыл бұрын
Hello...did you have run from mach3? please share how to wiring to the breakoutboard. which one pin numbre CN 2 should be to go to breakotboard. Thanks
@cncservocontrol
3 жыл бұрын
yes, support mach3
@jitendersingh8745
2 жыл бұрын
Ranig Motor me speed kese badaye
@sherrychen9899
3 жыл бұрын
we have stepper motor and servo motor,very good quality and price.
@akhildasari361
Жыл бұрын
Please send the WhatsApp no
@akhildasari361
Жыл бұрын
Where to buy servo motor
@TorresBS636
2 жыл бұрын
Ey bro. Where did you get the motor?
@AnwarAlfaqeehAlhusseini
5 жыл бұрын
this ac servo have software like delta ac servo ?
@cnc_channel510
8 жыл бұрын
Can you tell a bit more about this servo drive? Seems you have "KRS" driver.. I would also like to buy such kit - 750W version, but I have seen that some people had troubles with jitter while servo is under load. Have you already tested it installed on machine? Would you recommend it? Thanks
@shellyfasttobuy1548
6 жыл бұрын
hi sir, this 750W kit for your reference: www.fasttobuy.com/nema-34-digital-ac-servo-drive-motor-24nm-750w-220v-high-speed-3000rpm-for-cnc-router_p35886.html
@sherrychen9899
6 жыл бұрын
Hi,Sir,you can view our Chinese 750w servo kit: en.jstuoge.com/index.php/Show/index/cid/190/id/284.html Quick response,precision directioning,high torque big strength,high quality electrolytic capacitors,Japanese Tamagawa 2500 line encoder......
@TheMudfly80
6 жыл бұрын
Hi could you tell me how you hooked up single phase to this servo? Are your wires like Australian wire colours - Brown: Active / hot Blue: Neutral Green/Yellow: Earth (ground) ? So Brown L1 Blue L2 Green Earth ? What country are you in? Thank you
@sherrychen9899
6 жыл бұрын
Hi,Sir,you can view our Chinese 750w servo kit: en.jstuoge.com/index.php/Show/index/cid/190/id/284.html Quick response,precision directioning,high torque big strength,high quality electrolytic capacitors,Japanese Tamagawa 2500 line encoder......
@senthamaraikannan8873
Жыл бұрын
Price?
@skorkmaz
6 жыл бұрын
Can you adjust the speed with a potentiometer?
@robertohurtado6458
5 жыл бұрын
nop, is not for that purpose...
@truongkimson
4 жыл бұрын
You can see there is an empty channel above the encoder channel. You can feed +/-10vdc as setpoint signal into one of those pin to control speed in velocity control mode. Then to use potentiometer as an user input you need to build a circuit to output 10v according to your potentiometer
@maksudsheripow
5 жыл бұрын
Здравствуйте. я купил сервомотор у китайцев 110ST-M06030.месяц не могу подключит к плате урпавления . инструкция на китайском . не могли бы вы мне помочь с распиновку для подключения к плате управления.
@loganic8282
5 жыл бұрын
Привет брат по несчастью ,купил себе такой же набор ,разбираюсь с подключением . Как у вас успехи ?
Пікірлер: 23