This is great. Newbie here. My local community college actually offers CB and Ham radio classes. From Beginner CB to getting your HAM license. My son and I just signed us up For Beginner CB.
@jrichtruckincbtips
Жыл бұрын
Awesome, keep the hobby alive.
@preppinglife624
19 күн бұрын
In my mind it's still 1975 and everybody needs a CB radio!
@Magnesiac
2 жыл бұрын
Great video! I learned a lot. Recently dug my old man's modified mid/late 70's SBE-26CB out of a box in his garage. Got the dirt dobbers nest out. Carefully cleaned it up. Repainted the case. Fixed the fuse wire. Bought a new mic, antenna, and coax. It still works, just need to tune my antenna. Going to mount it in this 69 Charger RT I'm building. Appreciate the lesson.
@jrichtruckincbtips
2 жыл бұрын
Thanks for watching
@josephwilkins3982
8 ай бұрын
Whatever it takes. Ground the radio chassis though. It’ll only take one time for your equipment to bounce off something during a situation & you’ll fry everything.
@Denvercoder
2 жыл бұрын
Hey there man. I am driving a UHaul truck from Seattle to Denver and I thought I’d pick up a CB for the trip with plans to install it in my RAM when I get home. I live 1 mile from I-76 in northern Colorado. Anyway I was driving down I84 towards Colorado and I had the CB installed sitting on the seat next to me. I was listening to your videos and wondering why my radio wasn’t working. I was literally about to pull over to mess with the radio again when I noticed that traffic was stopped ahead. I instantly started hearing truckers talking about a roll-over accident. I got the Cobra 29 LX and the lil’ Wil from a truck stop. 😂
@jrichtruckincbtips
2 жыл бұрын
Thanks for watching
@Denvercoder
2 жыл бұрын
@@jrichtruckincbtips What do you think that Lil Wil antenna will give you rangewise? A trucker at the truck stop told me it would reach about 1/2 mile.
@Dragon1165
10 ай бұрын
Ive been having some type if CB since i was 14, either handheld or whatever, always looking at new ideas. And products, was easier when i was driving trucks, now i have to modify for my 4 wheeler again, i still have my Galaxy 66, I need to put it to use again.
@lesterhoward6561
5 ай бұрын
Great show! Lots of info! Im going to find a cb shop to peak and tune later, but the cobra is a good brand for a new guy! Very informative..great vid!
@NickCornaglia
Жыл бұрын
Anyone ever say you remind them of Ben Affleck? In Armageddon specifically. Anyway...just looking to get into CBs and your videos are a big help, super informative and very entertaining! Thanks!
@jrichtruckincbtips
Жыл бұрын
No, that would be a first.🤣🤣🤣 Thanks for watching.
@Curtis-cp2gr
2 жыл бұрын
My first cb mobile Johnson messenger 123 simple cb but great radio . Radio shack cb radios in my car one hander ( because of room) Truck had big Radio shack cb both did very good but I had a K40 4 ft on both I have president Bill in my Honda now love it ( that's what fits but good radio
@jrichtruckincbtips
2 жыл бұрын
Awesome! Thanks for watching
@LVDesert584
Жыл бұрын
Thanks I needed this
@rubentorres8397
2 жыл бұрын
Thanks for the help!
@paulgrodkowski3412
4 ай бұрын
Hi there, I hope I am not offending anyone here. I am commenting to say thanks for making this video. Paul.😀😀😀😀😙
@chansetwo
Жыл бұрын
Single Sideband (SSB) is not "channels between channels on different frequencies". This is an important point. If you're on channel 40 AM, you are taking-up the same channel as ch 40 USB and LSB. Single Sideband is just a way of cutting the channel in half and using each half separately. A station on CH 40 USB will not interfere with a stations on CH 40 LSB. But, someone on CH 40 AM will interfere with operators on 40 USB and LSB.
@xc8487
2 жыл бұрын
Guaranteed combo to succeed: 29ltd, 18ft quality coax, heavy duty spring, 5ft Firestick fs2.
@jrichtruckincbtips
2 жыл бұрын
No doubt a great combo, however I prefer the Skip Shooter over the Firestik II
@daysi3106
Жыл бұрын
Thank you 🙏
@wesholsapple81
2 жыл бұрын
Excellent video for this new-comer (both to CBs and your channel) I purchased a Cobra 29 wx nw st with external speaker and unbranded 3’ steel magnet antenna w/o a mike for $15 from a thrift store yesterday. Even though the radio looks new I need to see if it’s working before buying a mike, swr meter and possibly a better antenna. Any suggestions for testing to see if it’s working? Thanks. P.S. I like Duluth. Lol
@jrichtruckincbtips
2 жыл бұрын
Best is to find a cb shop, or join a local FB cb group and see if someone local to you can help.
@bobdillashaw4360
2 жыл бұрын
AM, FM, SSB, and CW, all same frequency, “different mode” that’s the simplest way to put it for the newbie.
@quaildogusa
Жыл бұрын
I mounted a Connex 3400 on the floor of my Dodge 1500 on the floor in front of the console. It points to the driver at 45 degrees and up. Easy to see and access all controls. The mount I used is a C520 Saw Tooth Hump Mount. I covered to saw teeth with plastic split conduit so it wouldn't cut the carpet. Its not bolted down, it just sits there very very stable. And it is easy to remove as I'm using a Little Wil mag mount. I wish I could post a photo.
@mrkultra1655
Жыл бұрын
Thanks
@milesdozier6028
2 жыл бұрын
Very good information 👍
@jrichtruckincbtips
2 жыл бұрын
Thanks for watching.
@markgossett2078
2 жыл бұрын
I enjoyed your video!
@103realtree2
2 жыл бұрын
Biggest mistake I made and I see others make when getting into CB radio. I Thought I knew everything and went out and over paid for a 10 meter. I didn’t really understand the extra knobs. I had crappy Rual King Coax. Very thin 3 foot fiberglass antenna. I didn’t even know what SWR was. Unfortunately the CB shop saw me coming a mile away and didn’t even bother to ask me the questions I should have asked myself.
@jrichtruckincbtips
2 жыл бұрын
Ugh, that sucks, and I hate to hear that. That's why I put these videos out.
@paulgrodkowski5839
11 ай бұрын
I can barely hear anybody on any CB radio. I used to like listening to Channel 6 Skip. 😀😀😈🦵🦬 I used to sort of like looking ar CB radios but I turned myself into a radio nut as a result.!
@shawnmchugh9016
Ай бұрын
Great video.im new to CB radios. I’m starting out with a cobra 19..what’s the recommended watt to turn them up to..
@jandroali4987
2 жыл бұрын
Good content sir thank you for this info!
@jrichtruckincbtips
2 жыл бұрын
Thanks for watching
@josephwilkins3982
8 ай бұрын
You can’t talk to that driver ahead of you with a blown out trailer tire on your cellphone or your laptop!
@jamesmcgee2447
11 ай бұрын
👍🏻👍🏻
@johnlogan3451
Ай бұрын
cobra 25 , small & simple
@chiefjoseph8154
7 ай бұрын
I just purchased the Cobra ltd 29 night watch and a K30 magnetic mount antenna and don’t know where to start……😮
@asherdie
2 жыл бұрын
Yaesu 857d with frequency expansion and screwdriver antenna
@jrichtruckincbtips
2 жыл бұрын
Beginners Bill! Beginners! 🤣 Although I picked up an Anytone quad 6 the other day. Install coming in a couple weeks.
@asherdie
2 жыл бұрын
@@jrichtruckincbtips just bragging. looking forward to that video.
@bornwaytoolate
2 жыл бұрын
@@jrichtruckincbtips I am looking forward to your install. I just got a quad 6 but have not installed it yet. I need some ideas for my 1999 Z71 pickup.
@jrichtruckincbtips
2 жыл бұрын
@@bornwaytoolate it's coming eventually, just have some other things going slowing down the videos, at the moment.
@phillipthompson6809
7 ай бұрын
I drive a company FL im not sure about the anntana there is two on the back of the sleeper. What i see is there is two different ones there not the same just trying to find out is is one for the cb and the other for something else. This is a company tractor so not much I can change on it.
@paulgrodkowski3412
4 ай бұрын
Hi there, I am a a newbie and I want to learn more about this. I got a questions: how can CB quality equipment be of good qulaity when it reads "Made in China"?
@kjohnson2931
2 жыл бұрын
What is more practical the new digital stuff or old school with built-in swr meter?
@jrichtruckincbtips
2 жыл бұрын
It's all in what you want, features, size, power. Don't buy one for the swr meter, they all have them, but none are accurate, always use an external meter.
@Arizona_rider
2 жыл бұрын
I would upgrade mine but nobody ever talks on them anymore unless you’re at a shipper who tells you to turn to a certain channel
@bobdillashaw4360
2 жыл бұрын
People still talk on them, and it’s gaining popularity again, just not like the 80s and 90s
@jrichtruckincbtips
2 жыл бұрын
It's unfortunate as well, but at least you have one. Keep it on for those traffic reports, and strike up a conversation at the truck stop.
@ekimp252
2 жыл бұрын
@@bobdillashaw4360 Were you around in the '70s? CB was crazy back then.
@bobdillashaw4360
2 жыл бұрын
@@ekimp252 no, to young in the 70s
@pauledwards3839
2 жыл бұрын
Got a cobra 29 chrome that stopped working. Found me old galaxy 33 that I have in 2022 volvo vnl but it's on its last leg... I have a 2500watt 4 foot skipper antenna with mirror mount & 18 foot wilson coax... wondering would ltd classic or bearcat 980 paired with 100 watt amp be my best beat over one of the $400 dollar radios... will have installed by someone that can tune it
@jrichtruckincbtips
2 жыл бұрын
I'm not big fan of Uniden (my preference) but when pairing a radio with an amp, you want a tech that knows what he's doing. As the radio can't be Peaked and Tuned for more watts. Should be a great setup with proper antenna grounding.
@pauledwards3839
2 жыл бұрын
@@jrichtruckincbtips what would u recommend? Just buy a stryker add zero mods and call it a day
@jrichtruckincbtips
2 жыл бұрын
@@pauledwards3839 You will spend about $250-$300 on a radio and amp. The Stryker 955 is great with a lot of features. Look at Walcott CB Shop. That can give you a good range of price vs power vs features.
@pauledwards3839
2 жыл бұрын
@@jrichtruckincbtips thanks for your time bud
@jrichtruckincbtips
2 жыл бұрын
@@pauledwards3839 no problem, wish I could help more, but I don't have a collection of radios to be able to tell you where exactly to spend your $300 and know that you'll be 100% happy.
@randycollins5757
2 жыл бұрын
Can you do a video on how to match cb with antenna
@jrichtruckincbtips
2 жыл бұрын
You mean tuning the antenna to match SWRs? Watch this video kzitem.info/news/bejne/xX9m0nt9r6thh5w
@hydroman1976
2 жыл бұрын
Newbie questions. Can i install one in my house? Is there an ultimate range limit? What if i built a very large antenna at home?
@jrichtruckincbtips
2 жыл бұрын
You can, people do attic antennas, and build their own. I have not, but there's CB Facebook groups that can help.
@mikefitzpatrick5209
2 жыл бұрын
You mentioned more High Powered radio you use in your current rig. Is there radios that come form the factory with more than 4 watts or do you have something like a linear amp connected?
@jrichtruckincbtips
2 жыл бұрын
Yes, look at 10 meter cb radios. They have to be converted to 11 meter, but any cb shop can do that for you.
@theunboxnetwork
2 жыл бұрын
I am buying a cb radio and antenna for my Fraightliner Carnado 2014. Which one would you recommend I need a good cb and antenna.
@jrichtruckincbtips
2 жыл бұрын
Is it a day cab, flat top, mid roof, high roof? Budget? Check out my CB Playlist where I have several videos on my old Coronado.
@theunboxnetwork
2 жыл бұрын
@@jrichtruckincbtips its a dump truck so I think it's a day cab as for budget I can spend up to $1k.
@jrichtruckincbtips
2 жыл бұрын
@@theunboxnetwork is it a tandem dump truck or a tractor trailer end dump?
@theunboxnetwork
2 жыл бұрын
@@jrichtruckincbtips its a drop axle dump truck
@jrichtruckincbtips
2 жыл бұрын
@@theunboxnetwork remember that the radio is only 25% and the coax, antenna and grounding is the other 75%. A tall antenna mounted low on the mirror hoop like a Skip Shooter or predator. RG8X coax, RF BONDING the cab. For the radio a Ranger X9 is a great choice with power, features, and a compact size to fit in the overhead. The Stryker 955 is another great choice, it is larger so hanging it from the overhead will be needed, it has power, features, and if that your choice I would order it from Big Rig Radios out in Phoenix AZ and get one of his custom power cords for the Stryker.
@geriatricginger
2 жыл бұрын
The "President Bill" is 4" x 4" x .95" base, just for info-purposes..
@jonatanreyes886
2 жыл бұрын
What’s the best antenna for a pick up truck with the antenna mount mounted behind the cab on the bed?
@bobdillashaw4360
2 жыл бұрын
102in. steel whip with a spring mount
@Islandboi821
2 жыл бұрын
@@bobdillashaw4360 yep! I like the Hustler brand IC-56.And the skipshooter is also good.
@jrichtruckincbtips
2 жыл бұрын
If you can accommodate a 102" whip, that would be best, if not Hustler and Skip Shooter are the next best. Just be sure to get the coil above the roof line with any antenna except for the 102" whip.
@erichwise7734
2 жыл бұрын
So i already have a President electronics CB, but the mic is a 6 pin, and the mics oh recommend are all 4 pin, what would you recommend?
@jrichtruckincbtips
2 жыл бұрын
I haven't used a President radio, so I'm not sure how a 4 pin would effect the radios performance. I like Ranger mics, and Astatic, but don't like the Astatic cords. I do know my Anytone at6666 only works well with it's factory mic.
@83Yankee
2 жыл бұрын
There are rewired 4-pin mics that have the correct 6-pin connector for President radios. There are also 6 to 4 pin adapters available. You’ll lose the “up” and “down” buttons that are on the factory mic, but aftermarket mics can be made to work.
@whatittooye
2 жыл бұрын
Probably reallllly dumb but itd be my first CB and my old mans 6th but ive taken a likin too the Ranger RCI X9 but ive read its a 10 meter radio which means id have too get a permit for it correct? If so whats a pretty good CB for 4 wheelin/a Jeep? Probably gonna be on a 4-8 1/2' whip. Any help is greatful
@jrichtruckincbtips
2 жыл бұрын
If you order the X9 from a CB shop they will convert it to 11 meter for you. And yes it puts out more power than is legal, but nobody pays attention to that.
@whatittooye
2 жыл бұрын
@@jrichtruckincbtips Ah ok thanks for the clarification and thats exactly what my old man said. I mean either way im probably gonna put an amp on it so i can reach out 10+ miles in case we ever get stuck.
@jrichtruckincbtips
2 жыл бұрын
@@whatittooye when you get an amp you may need to gave the radio retuned to properly drive the amp, so you don't burn it up.
@whatittooye
2 жыл бұрын
@@jrichtruckincbtips Thanks for the tips dude seriously. If i questioned my old man this much hed get irritated and wonder why i wanna know all this.
@jrichtruckincbtips
2 жыл бұрын
@@whatittooye yeah, it's like "ya starting your own CB shop or something?" LOL
@wilfredprins9718
2 жыл бұрын
Hi, What you think of the Midland M-Mini USB?
@jrichtruckincbtips
2 жыл бұрын
It being a European radio, I'm not familiar with how easy it would be to get a local repair or upgrade. But, looks to be a nice compact radio, made by Midland which is a very respected name in radios.
@wilfredprins9718
2 жыл бұрын
@@jrichtruckincbtips thanks, I didn't know it was only available in Europe.
@jrichtruckincbtips
2 жыл бұрын
@@wilfredprins9718 it's programmed with the European radio frequencies. Similar compact American radios can be found from Stryker and President.
@arnoldgamao4342
2 жыл бұрын
Is cb radio applicble in the phillipines?
@jrichtruckincbtips
2 жыл бұрын
You'd have to look up what frequency they use there. They could be on 10 meter instead of 11 meter.
@arnoldgamao4342
2 жыл бұрын
@@jrichtruckincbtips thank you
@locascioantonino
2 жыл бұрын
Why didn’t you just turn it upside down on the dashboard but then you can hear True you speaker
@jrichtruckincbtips
2 жыл бұрын
Nah, I'm good.
@manuelmedina247
2 жыл бұрын
I have a cobra 19 with a 4inc fire stick. Someone told me to buy a Wilson 5000
@jrichtruckincbtips
2 жыл бұрын
I need more info. What kind of vehicle, where's it mounted, mag mount or bolt on mount?
@manuelmedina247
2 жыл бұрын
@@jrichtruckincbtips jeep gladiator its bolted on the right side of the hood. some times i can pick up people talking but not all the time.
@jrichtruckincbtips
2 жыл бұрын
@@manuelmedina247 the fiberglass top load antenna is fine, you're getting the coil above the roof line. You won't with a Wilson 5k, plus I've been hearing lately about water getting in the Wilson 5k. What is your SWR, is the antenna grounded, how long is the coax?
@manuelmedina247
2 жыл бұрын
@@jrichtruckincbtips the coax cable is long but I made sure it’s not bundled up. And my SWR readings are below 1
@jrichtruckincbtips
2 жыл бұрын
@@manuelmedina247 I would ground the mount to the frame with 1" flat braid, then you'll have to check the SWR again.
Пікірлер: 118