Great video, I've been searching for this information for a long time, this is the best video I found. Thank you
@blueplanetsurf
4 жыл бұрын
Stoked to hear it was helpful 🤙🏼
@pet_cow_5452
4 жыл бұрын
Brilliant explanation! I like how you even explained foils by other companies; seem like a genuine fella, cheers
@blueplanetsurf
4 жыл бұрын
🙏😎🤙🏼
@user-fe2gq1uj7q
4 жыл бұрын
@@blueplanetsurf im 70 kg and i wanna make my own foil pumping board can u help mme with the right dimensions
@Doom_Head621
4 жыл бұрын
really exited for the future of downwind foiling, especially prone riding on small boards. i am the proud new owner of a foil board and am really stoked to explore and nerd out
@blueplanetsurf
4 жыл бұрын
Good for you. 💪 Prone paddling into wind swell is very challenging, so if you want to downwind foil on a small prone board you will need someone to tow you into the swells or start from a dock or a breaking wave. You want to be very good at pumping and maintaining flight before attempting downwinders. 🤙🏼
@nathanielgray4235
3 жыл бұрын
Vary good explination of details of how the foil works ill be saving this video for future reference
@blueplanetsurf
3 жыл бұрын
Glad you find it useful 🤙🏼
@PricemoSC
3 жыл бұрын
Best info.. Just what I needed, learned so much! Thank You!
@blueplanetsurf
3 жыл бұрын
Thank you for the comment! 👍
@claudiacecilia6440
2 жыл бұрын
Thank you so much! I like Konrad too.
@anthonyrutten4018
3 жыл бұрын
Thank you!! That answered questions I didn’t know I had till I watched this video🤔 Now if I could just find some used foils cause I can’t afford new ones! 🥴
@blueplanetsurf
3 жыл бұрын
It should be easy to find a used foil since foil crazy people like me keep buying new foils and selling their older ones.🤙🏼
@kb4363806
4 жыл бұрын
Robert, another outstanding video breaking it down for us rookies. Keep up the good work. I still think you should be the Mayor of Honolulu. Cheers, Mark
@blueplanetsurf
4 жыл бұрын
Thank you for your vote of confidence Mark! 😎🤙🏼
@boundlesswheels7169
3 жыл бұрын
Thanks so much. I learned a lot.
@blueplanetsurf
3 жыл бұрын
stoked, thanks for the comment!
@philipdunn7408
4 жыл бұрын
More great tech info Always a great help Thanks
@blueplanetsurf
4 жыл бұрын
Glad you liked it 🙏😎🤙🏼
@davidchinery1288
4 жыл бұрын
Excellent talk on the use of foils, but please remember the width of the foil by the length of the foil is known as the ‘Aspect Ratio’
@blueplanetsurf
4 жыл бұрын
Good point👍
@henriknordgren2432
5 жыл бұрын
Thanks for posting these videos. Have been watching yours for quite some time now. Can't wait for the new high aspects wings to arrive (More than GoFoil GL and Signature) Exiting times ahead.
@blueplanetsurf
5 жыл бұрын
Yes, I think we will see a lot more developments in the future 🤙🏼
@AMisimovic
3 жыл бұрын
Great explanation. Thank you.
@blueplanetsurf
3 жыл бұрын
Thanks! 🙏😎🤙🏼
@trevorbrouelette6621
2 жыл бұрын
Thanks so much! I'd love to check out a shop that would able to recommend certain foils and boards for my skill level and size. Even with the information in this video I am unsure what I am looking for.
@blueplanetsurf
2 жыл бұрын
No problem, see if you can take a lesson and use their gear for the first few tries.🤙🏼
@paulosilva-dm1qb
4 жыл бұрын
Very very infromative..Thanks for the support...
@blueplanetsurf
3 жыл бұрын
Glad you liked it! 😎🤙🏼
@FunSeekersorg
3 жыл бұрын
Thank you Robert for all the knowledge. Forgive me if I missed it but could you touch on the rear foil and why tips up or down? Appreciate it. Aloha
@blueplanetsurf
3 жыл бұрын
Good question. Tips up or down on the stabilizer tail wing will make it more directional than a flat tail wing (like fins on a board) but whether they point up or down will not make a big difference when you are starting out.
@SuperHyee
3 жыл бұрын
Thanks and respect !
@blueplanetsurf
3 жыл бұрын
🙏😎🤙🏼
@HelmetBlissta
4 жыл бұрын
Very informative, thanks
@blueplanetsurf
4 жыл бұрын
Glad to hear 🙏😎🤙🏼
@levmarkov5364
4 жыл бұрын
Very nice video, informative and pleasant in style. Thanks! Is there any other about board and foil connections types?
@blueplanetsurf
4 жыл бұрын
Glad you liked it. There are basically two types of connections: deep Tuttle and Plate mount. We don’t have a video comparing the two but our Foil Strongbox System is compatible with both: kzitem.info/news/bejne/kqZ_z6Skh5eZnJg
@elpanchazo
5 жыл бұрын
Awesome review!
@blueplanetsurf
5 жыл бұрын
🙏😎🤙🏼
@wildhogget69
4 жыл бұрын
Excellent explanation of foils, learnt so much here today, what board size and foil would you recommend for 88kg normal intermediate SUP-er? (Will be using on the sea)
@blueplanetsurf
4 жыл бұрын
As a beginner, try a board in the 140-160 L range, like our 7’6 Easy Foiler and a easy to use foil wing in the 1500 to 1800 sqcm size range.
@chomp5597
4 жыл бұрын
Holy shit!!!! I'm totally buying a glider!!!!!!!!
@blueplanetsurf
4 жыл бұрын
Yes! It’s probably as close to flying like a bird as a human can get
@nickcormier1243
4 жыл бұрын
This is great! Wondering if you’d be happy in sharing what you think on a hardwood Japanese joinery foil... I do wood working for a living and thought it be an amazing project. Curious to know what an expert would say on the subject. Thanks.
@blueplanetsurf
4 жыл бұрын
Sounds cool, just make sure it’s strong and stiff enough in the high stress areas I mentioned. Getting the profile curves and angles just right is key. Making the mast stiff enough might be challenging as well.
3 жыл бұрын
Hi! If i just do it from a dock cuz i dont have a boat. Wich one would work?
@blueplanetsurf
3 жыл бұрын
That’s not my expertise. Follow the “Wake Thief” he has lots of videos on dock starts and the best gear for pumping: kzitem.info
3 жыл бұрын
@@blueplanetsurf thanks!
@karenp5374
4 жыл бұрын
Thank you!
@blueplanetsurf
4 жыл бұрын
👍😎🤙🏼
@janmillan9936
4 ай бұрын
Is 2600sqcm front wing good for flat water pump surf environment?
@blueplanetsurf
4 ай бұрын
It’s not just the size, it depends on how efficiently the foil works for pumping and also your weight. More surface area creates more lift but also more drag so there has to be a good balance.
@christophemeletiou9078
5 жыл бұрын
Thank you so much for all the input. Did you mention a shorter fuselage was better for pumping ? Was always told the opposite... Also what is the influence of the stab's area when pumping? Makes any difference? Thanks again !
@blueplanetsurf
5 жыл бұрын
Hi Christophe, I find that a longer mast makes pumping a bit easier, especially on a bigger board, as you can make bigger and slower pumps with more leverage. That said, pumping is most efficient if the wing stays close to the surface, so some prefer taking shorter, quicker pumps on a shorter mast (and shorter fuselage) to keep the foil flying high. Also, a longer mast has more drag so if you don't keep it flying high it can slow you down and it's more tippy. A bigger stabilizer tail wing will give you more lift and can make pumping easier, also a bigger angle of incidence in the tail wing will give it more lift at lower speeds, hope that helps.
@christophemeletiou9078
5 жыл бұрын
@@blueplanetsurf Thanks it helps a lot, having wake surfed behind a boat for a while I quickly realized that the wing needs to be near the surface to be really efficient. A fine balance between performance, control, and stability!
@sunovadistributionn.z.693
5 жыл бұрын
killer thanks :)
@blueplanetsurf
5 жыл бұрын
Glad you liked it!
@Ocanadakiter
3 жыл бұрын
I'm 270lbs is there boards big enough for me? Where can I buy one ? I'm in British Columbia Canada 🇨🇦
@blueplanetsurf
3 жыл бұрын
We have Stand up paddle boards that will work for you but if you want a beginner sup foil board, I would recommend getting a custom made boards with around 200L volume. 🤙🏼
@blueplanetsurf
3 жыл бұрын
We have a distributor in Canada: www.hcsurf.com
@Ocanadakiter
3 жыл бұрын
@@blueplanetsurf Thanks man...will look into that. Cheers 🤙🌞
@AlohamanIan
5 жыл бұрын
Where is this spot, looks like a nice easy wave to train on.
@blueplanetsurf
5 жыл бұрын
It’s in Waikiki
@user-fe2gq1uj7q
4 жыл бұрын
Can u tell me the best dimensions of wings and the mast and the board for the best solo foil pumping that would realy help
@blueplanetsurf
4 жыл бұрын
As mentioned in the video, there is no easy answer, foil surface area depends on rider weight and how efficient the foil is. A smaller board is easier to pump but harder to catch a wave with, a longer mast allows more up and down movement but also has more drag. For tips on pumping, check this video: kzitem.info/news/bejne/xZ-i0KNsfnl1l4Y
@ezaccog3863
5 жыл бұрын
What hardboard SUP would you recommend for downwinding in 60+ mph winds ?
@blueplanetsurf
5 жыл бұрын
It depends how good you are at pumping yourself up on the foil. The smaller the better once you are flying the foil. I started on a 12’6, now I use the 5’8 Carver Foilboard for downwinders. Lately we have been doing Downwinders with handwings, that’s super fun and easier than using the paddle.
@ezaccog3863
5 жыл бұрын
Thanks for the help. I’ve got a good amount of experience on downwinding with 12’6 paddle boards but have never used a foil board before. Is there a minimum windspeed that it should be used with ? Is there a minimum wave height ?
@blueplanetsurf
5 жыл бұрын
Getting up on the foil in a downwinder takes some serious skills as does keeping it flying. Ideally you want to be able to pump a foil back out and catch two waves in a row before you attempt DW foiling. You could probably learn this on a wake of a boat as well or with a hand wing, but just going out with a paddle on a windy day to learn to foil is almost impossible, sorry to burst your bubble.
@ezaccog3863
5 жыл бұрын
Thanks so much for the help. Will learn foiling on a boat wake first.
@blueplanetsurf
5 жыл бұрын
@@ezaccog3863 good, learn to foil the wake and also to pump in flat water without any push so you can connect bumps once you are up on the foil.
@adrianuskristianto5
4 жыл бұрын
Great info, so there is relation between shape of the wing, the profile, the use and the effect of every component, yesterday I googling about the profile of the hydrofoil wing... perhaps one of those wing use this profile...? www.researchgate.net/figure/NACA-4418-NACA-63-818-and-NACA-63-218-hydrofoils_fig5_289531220 is this the type of the low or high aspect ratio...? thanks... cheerss
@blueplanetsurf
3 жыл бұрын
Hi Aspect vs low aspect refers to the outline of the wing, not the profile. A thinner profile is faster but can drop off sooner at lower speeds and is not as forgiving as a thicker profile (generally speaking)
Пікірлер: 74