Chord should pay you guys to make 'how to' videos for all of there products. You explain them better than Chord does. Thank you.
@moon-audio
2 жыл бұрын
Thanks so much for the kind words. 🙂
@BharatSingh-pw7sh
Жыл бұрын
I second that! So much better explanations of how buttons work. Thank you.
@BharatSingh-pw7sh
Жыл бұрын
Excellent video, as always! Thank you Sir. Namaste.
@hiterss
3 ай бұрын
Agree!!!!
@frankrotthier4392
Жыл бұрын
great video! Thanks! Can't wait to receive my Chord Mojo 2 in a few days
@moon-audio
Жыл бұрын
Thanks a bunch, Frank! 😁
@billymisfits
Жыл бұрын
is there a setting that it should be in if you want to use it as a standalone dac connected to a dedicated headphone amp?
@saamees9783
2 жыл бұрын
HI Moon Audio, Please I need little Help. If i need to Buy Adapter/ Connector where i can Buy the high end/ Good one. In my case i need to get 2.5 male and 3.5 female Connector ... ???
@moon-audio
2 жыл бұрын
Hi there, we would love to earn your business and craft one of our custom Dragon Cables for your set-up! Please reach out to us here: www.moon-audio.com/contact-us
@moon-audio
2 жыл бұрын
Just to be clear, you cannot convert a single-ended headphone cable to balanced. You must re-terminate or replace your headphone cable with a balanced cable. Why?? Please see our article here: www.moon-audio.com/balanced-adapters-caution However, you can do the opposite and convert that balanced headphone cable to single-ended. You can reach out to our engineering team here to discuss your cable options: www.moon-audio.com/contact-us
@bedroommusician6135
2 жыл бұрын
In terms of sound quality, Chord Mojo 2 or ifi xdsd Gryphon? Same price bracket but the ifi seems to be easier to use.
@moon-audio
2 жыл бұрын
Glad you ask. Make sure to see our Death Match we just did on this exact comparison. Make sure to subscribe to our channel as the video should be up in a week or two.
@bedroommusician6135
2 жыл бұрын
@@moon-audio Nice. I have been conflicted to step up my audio game. It is either those two or High-end DAP like DX320. If you have opinions regarding this, it would be helpful. Oh yeah, I mostly will use it with IEM though.
@bedroommusician6135
2 жыл бұрын
@@moon-audio No Death Match yet, I have decided to buy the mojo2 anyway yesterday. 😀
@moon-audio
2 жыл бұрын
@@bedroommusician6135 it will be up in the next week. :)
@bedroommusician6135
2 жыл бұрын
@@moon-audio Too late 😜 No regrets, I like my mojo a lot 🤩 At first I thought that I would be having a hard time with the colour-coded thingy but surprisingly, it is fine for me. Not even annoying. Definitely worth it. I am glad that this video is very helpful too although not very helpful for me since my memory is flawless 😎
@andreaaaaaaa574
Жыл бұрын
I didn't Say how ti active the intelligent desktop mode
@moon-audio
Жыл бұрын
Desktop mode is activated automatically when using the unit plugged in to a charger while at full battery.
@psysword
11 ай бұрын
How do you switch between usbc and optical input? A bit clumsy
@moon-audio
11 ай бұрын
If multiple inputs are connected simultaneously, Mojo 2 will auto-select the correct input when music is played to the device. USB has priority followed by coaxial and then optical. It is only possible to connect one USB at a time (Micro-USB takes priority over USB-C). Hope this helps! 🙂
@laika25
Жыл бұрын
FAN TAS TIC! /Thanks a whole big bunch!!!
@vmat377
2 жыл бұрын
Chord should do away with the whole button and colour schema and use a bluetooth (or wired) connection with an app interface on a phone to control the DAC.
@moon-audio
2 жыл бұрын
Bluetooth will never sound as good as full bandwidth from either Wi-Fi connection or wired connection, in our opinion.
@vmat377
2 жыл бұрын
@@moon-audio Nope. I’m not referring to audio streaming. I’m referring to the ball(s) interface on the device and replacing that with a phone app interface using Bluetooth as the wireless protocol. Would do away with the cryptic colours and button presses.
@moon-audio
2 жыл бұрын
Gotcha, that's an interesting thought! 🙂
@vrpigeon8694
Жыл бұрын
I have a denon dm41 with a pair of Dali Specter 2’s. Will I benefit from pairing it with this DAC to play music from Apple and Spotify?
@moon-audio
Жыл бұрын
You can depending on your setup. If you have a digital source/streamer you can do: Source -> Digital input of Mojo 2 -> Output via a 3.5mm Cable to Dual RCAs -> Analog input of the Denon DM41 Here is a link of our 3.5mm to dual RCA cables if you're interested: www.moon-audio.com/blue-dragon-portable-mini-cable-v3.html
@suntanglory
2 жыл бұрын
Which sounds better and more powerful, the mojo 2 or Ak SR 25mk 2? Thank you.
@WarawutLi
2 жыл бұрын
Mojo 2
@suntanglory
2 жыл бұрын
@@WarawutLi Cheers.Did you listen to both by any means?Thank you.
@garyhawke7242
2 жыл бұрын
@@suntanglory I have both and for me the Mojo 2 is a much more powerful and detailed.
@suntanglory
2 жыл бұрын
@@garyhawke7242 Thank you mate.
@moon-audio
2 жыл бұрын
Mojo 2 for sure.
@laiwoh5001
2 жыл бұрын
Hi brother I have problems the poly when I place sd card to use but go figure can’t show list of music .how do I make it show the playlists thx?
@laiwoh5001
2 жыл бұрын
Any website can teach me how to do it?
@darrellross8609
Жыл бұрын
Is jitter from a CD transport coax out an issue on the mojo? Best, D.
@moon-audio
Жыл бұрын
It has not been an issue in our testing with the CD Transports we carry!
@theocostello
2 жыл бұрын
Thanks for the video. I’m actually thinking of upgrading my SR25 for a Mojo-Poly. In your opinion would this represent a significant upgrade in audio quality. I’m using Meze RaiPenta. Thanks
@moon-audio
2 жыл бұрын
Yes, the Mojo 2 is a highly resolving DAC. It will bring out more details from your music than the DAC used in the SR 25. The Poly makes the Mojo 2 wireless, so it could compete with the SR25's portability, but the Poly won't add to the sound quality beyond the Mojo 2. The Mojo 2 and Poly pair excellently with your Rai Penta IEMs.
@theocostello
2 жыл бұрын
@@moon-audio really appreciate your reply. Thank you.
@RJ_Chicago
2 жыл бұрын
Is the new Poly firmware backward compatible with the Mojo 1?
@moon-audio
2 жыл бұрын
Hey RJ - yes the Poly was made originally for the Mojo 1 so it is compatible! 🙂
@radio1100
2 жыл бұрын
@@moon-audio For a more complete answer: I have updated my Poly to firmware to 3.0 and it works with the old Mojo - unfortunately it still doesn't work with my new Mojo 2 🤔
@moon-audio
2 жыл бұрын
@@radio1100 Try doing the manual mode with the Sim Key and a pair of headphones to test if the Poly is truly on v3.0. Do with original Mojo.
@LIANGWU-c6t
2 жыл бұрын
I fully understand that Chord provide 'the chord sound' tunning experience with low price, which is really appealing.....But, That EQ like thing, from my opinion, is a little bit 'stupid'. I mean, I you will spend couple hours to tunning your favorite sound, why not just go to audio store to buy a your favorite tunning sound instead. Anyway, it provides many possibilities, which is really great. (I am not blame Chord for that, and I love chord sound!!!)
@VidyabhushanTiwari
2 жыл бұрын
You need to watch Rob Watts CanJam presentation to understand why the EQ is implemented this way. Traditional EQ tend to also attenuate and increase noise floor at mutliple levels (bands). There is absolutely no way to get around it. What Chord (actually Rob Watts) has achieved here is something spectacular. So, it is not stupid, rather ingenious.
@hekakain4108
Жыл бұрын
How do I eject micro SD card from poly? Cheers.
@moon-audio
Жыл бұрын
Pressing the card in gently a bit further will cause it to eject partially where you can then easily remove the SD card from the Poly itself.
@willjohnson2722
Жыл бұрын
Has anyone tried a different PSU on the Mojo 2 in desktop mode? I've asked on the forums but never get any feedback. I'm thinking of an iFi iPower X. I've got one on a streamer and it worked well.
@moon-audio
Жыл бұрын
We have not tried the iFi iPower X with the Mojo 2, and it's important to note that the Mojo 2 just uses a MicroUSB port for power. That said, as long as it matches the power specs from Chord, you can certainly try a different charger with it!
@robertlee9935
11 ай бұрын
@@moon-audio ipowerx is a low noise audio power supply, absolutely no point in using it as a battery charger over a bog standard cheap unit , mojo takes its power from the battery not a power supply, desk top mode just trickle charges the battery
@psysword
11 ай бұрын
I almost cried when I heard this DAC for the first time. Bought another one immediately. This is going to be part of my life forever. Chifi is a rip off. Never again
@18000rpm
2 жыл бұрын
Jesus Christ why do we let equipment designers get away with complete sh*t UI like this. Add a $3 LCD screen ffs.
@dilbertpugh8517
2 жыл бұрын
Hey they can build wtf they like, you can buy wtf you like!
@theonlyegg
6 ай бұрын
A small OLED screen would be cheaper and 100x better than this ridiculous color system.
@natevirtual
2 жыл бұрын
Mojo 3 will definitely need a screen for me. The buttons system is too complicated for my liking...
@NoahBershatsky
Жыл бұрын
I was just thinking the same thing.
@DJR5280
Жыл бұрын
You saved me returning my Mojo2. Basically I was in low gain mode and I could barely gwt any volume out of my headphones. I researched all over including Chords own manual and got nothing. Your video showed me I was in low gain, changed to high gain and white menu light came on and now I have good power again. Thank you
@moon-audio
Жыл бұрын
Glad we could help! 🤗
@pistopit7142
7 ай бұрын
You actually should have it in low gain as it creates less distortion and cleaner sound than having it in high gain. The only exception when you want to put it in high gain is when you need more power to drive whatever is on receiving end.
@raphaelmeillat8527
Жыл бұрын
It's got to be the crappiest HMI I have ever seen! Why they stick to it after hundreds or thousands of complaints like mine is simply beyond me! Please check out how iFi audio did it for their Gryphon portable dac!
@AntonioGonzalez-ug2lj
10 ай бұрын
Thank you very much for your excellent work. I would like to ask you how I should configure the volume buttons to work as a line out, if this function is available. Thanks again and a big hug. 😊
@moon-audio
9 ай бұрын
Hi there! The Mojo 2 does not have the line-out feature the Mojo 1 has because it was blowing the ears off of customers after setting it to line level out and forgetting they did. Chord suggests using the "Blue" volume setting as the line level voltage output for most inputs. Please remember to turn it back down before connecting headphones. Hope this helps! Read more about the Mojo 2 here: www.moon-audio.com/chord-mojo-2-everything-you-need-to-know
@selwynmager5644
2 жыл бұрын
Hi where did you get the Chord glass display stand from how can I get one thanks
@laika25
Жыл бұрын
I'm assuming bundled in the box is a usbc to usbc cable?
@colingordon0986
Жыл бұрын
Just bought the chord 2 with the Thieaudio oracle 2 iem! So excited to try these out for portable use 😃
@gustavobandres
10 ай бұрын
Greetings and thanks for the good video. I would like to know if you have a guide to configure the Mojo-Poly combo and use it to listen to music with streaming services. Thank you very much for all the information you provide. 👏👏👏👏👏👏👏
@moon-audio
10 ай бұрын
Thanks for your comment! We have a detailed Mojo 2 User Guide on the page below. Just scroll down a bit and you'll see it linked in the "What's New" section: www.moon-audio.com/chord-mojo-2-everything-you-need-to-know 🙂
@PartySpock
19 күн бұрын
The mojo 2 is a piece of crap . White noise and distortion, sorry to say that . 500 euro,s It,s very very frustrating.thank you
@laika25
Жыл бұрын
I keep coming back to this video... I can't thank you enough. 👍👏👏
@moon-audio
Жыл бұрын
You're welcome! 😁 Any other videos you'd like to see on the Mojo 2?
@laika25
Жыл бұрын
@@moon-audio Nothing I can think of at the moment but I'll let you know if something comes up ☺️
@ANSWERTHECALLOFJESUSCHRIST
Жыл бұрын
This great video has prepped me for the Mojo 2 I have in the mail. The red to blue logic really helped me grasp the light colors. 😃
@RJ_Chicago
2 жыл бұрын
Do you have any instructions on how to connect an M-Scaler to a Mojo2, what benefits we should see from doing so? What cables do you recommend for that purpose? Also any Mojo2 settings we would need to implement? It seems your guides and videos have nearly completely ignored this new functionality with M-Scaler which I think is attractive, especially as a current M-Scaler owner as it is another way to put my M-Scaler to use. Thanks.
@moon-audio
2 жыл бұрын
Order this cable and the Dual Data is automatic: www.moon-audio.com/black-mini-coax-hugo-2-hugo-m-scaler.html The Mscaller allows you to upsample and send much higher resolutions o the Mojo 2 or Hugo 2 or Hugo TT2 or the Dave. More info on this in the Mscaler manual and Chord Electronics White Paper here: www.moon-audio.com/chord-hugo-m-scaler.html
@쿼드럿
2 жыл бұрын
Thanks for your great review..when mojo 2 is connected with PC or phone , can I change the volume in PC or phone side ? .. I know this is not recommended way for sound quality..
@moon-audio
2 жыл бұрын
On a computer, there are different ways to do this depending on if you are set in exclusive mode or depending what music software you might be listening to. But short answer is yes! 🙂
@britishbiasf1
Жыл бұрын
what volume setting should I use to get line out? Does it have a line out mode?
@moon-audio
Жыл бұрын
Yes! When you are using Line Out, the Mojo 2 is set to max volume. Do not change as this is optimized for that purpose. 🙂
@老派青年
2 жыл бұрын
How about mojo2 with hd800s? Is it working well?
@moon-audio
2 жыл бұрын
Yes the HD 800s pairs very well with the Mojo 2!
@laika25
Жыл бұрын
Anybody knows what the color codes are for the volume on the Mojo? I see it go thru different hues as I go up or down. THANKS
@moon-audio
Жыл бұрын
We cover the colors for volume control starting at 5:08. Red is the lowest volume in both low- and high-gain modes, and it progresses "up" through the rainbow from there. Hope this helps! 🙂
@laika25
Жыл бұрын
@@moon-audio Helps A LOT. Thanks a bunch. (Later I revised the whole video and realized it was there, thanks again) Ps. Finally getting the hang of the Chord rainbow system. 🙂
@7quidstudio
4 ай бұрын
Just got mine for use with my Focal Elegias. Thanks so much for this very helpful and informative review.
@Gadgetdad007
2 жыл бұрын
Is it true what I’m hearing that Spotify Connect is coming to the Chord Mojo / Poly ?
@AAI17
2 жыл бұрын
Hi, How can I update Poly? I can't connect it with Mojo2
@moon-audio
2 жыл бұрын
Hello, you can follow our instructions on updating your Poly's firmware to V3.0 here: www.moon-audio.com/blog/chord-electronics-poly-firmware-update-v2-0-0
@AAI17
2 жыл бұрын
@@moon-audio thank you!
@ondrejjirsa8547
2 жыл бұрын
Ibasso Dx 240 vs Mojo2 soud victory?Thank you
@Jim90wa
11 ай бұрын
I would really like a poly/mojo 2 review from you guys as I think the Poly might be a product I would love to buy! Only one review that I can find earlier than 4 to 5yrs. Is the poly out dated? Is it still a go to product with Mojo 2 and Roon and on the go hi rez listening?
@moon-audio
11 ай бұрын
The Poly is not outdated and works great with the new Mojo 2! Each Poly has been updated to the newest firmware (v3.2), which has been fully upgraded for the Mojo 2 and ready to go with Roon and other portable hi-res options. Check it out here: www.moon-audio.com/chord-poly.html 🙂
@stonefree1911
Жыл бұрын
Is there a way to bypass the volume control when using it as an in-system DAC?
@moon-audio
Жыл бұрын
No, but you can leave it at a certain level for constant operation and control the volume using your separate pre-amp!
@eliranamr5748
2 жыл бұрын
I have the first mojo does it have any sound settings at all? Any modes or somthing i should know?
@moon-audio
2 жыл бұрын
I'm sorry it does not.
@rodrigod2917
Жыл бұрын
Would you mind sharing an eq setting for the meze liric?
@moon-audio
Жыл бұрын
All of the main EQ options would be manually set by you, I would start with how you want to change the sound of the Meze Liric. For example if you want a bit more bass you can increase the first bass EQ choice until it feels natural and then increase the bass shelf to match! If you want a more in-depth guide email us via our Contact US form: www.moon-audio.com/contact-us!
@zviratko
2 жыл бұрын
No balanced output. No screen, no app. Audio might be waaaay better than any setup I currently have, but sadly, due to the issues above, I'll never even hear it.
@roblucchetti2993
2 жыл бұрын
You should look into why FPGA setups don't really benefit from balanced output. Screen isn't needed - and all i need is my preferred music app. You should really hear on first before deciding.
@psysword
11 ай бұрын
I just realized that I'm color blind
@sandratyler5387
2 жыл бұрын
Brilliant walkthrough of my latest Mojo 2 !
@moon-audio
2 жыл бұрын
Glad you liked it!
@dingskydongsky
7 ай бұрын
Chord is overpriced, overhyped. Their designers are toddlers on acid.
@davesheather4306
25 күн бұрын
Best music & fav albums were when on acid..
@Lucaat
2 жыл бұрын
Feature rich & exstensive audio engineering. (I can appreciate the designers work in terms of audio knowledge and the design of complex electronics) BUT, sorry, 775 bucks for this absurdly horrendous usability nightmare is not acceptable. A device with this feature set needs a screen.
@billjobes1851
Жыл бұрын
Is anyone using the Mojo 2 as an external DAC coupled with the Sony WM1AM2 Walkman II as a digital music player with its internal DAC disabled? If so, is adding the Mojo 2, or perhaps the Gryphon worth it sonically?
@cuccaio83
2 жыл бұрын
still no one has noticed that the 3 kHz mark (2:34 in the video) is wrong, I am shocked
@cuccaio83
2 жыл бұрын
@Broke Audiophile The mark (cyan bar) labeled "3 kHz" is instead at 1.2 kHz
@moon-audio
2 жыл бұрын
@@cuccaio83 EQ settings are measured at their peak. All the graphs which you can see at www.moon-audio.com/chord-electronics-mojo-2-dac-amp-review are done this way (by Chord).
@cuccaio83
2 жыл бұрын
@@moon-audio This is the second time I've received this kind of response, have you all been educated by Chord? Did you realize that in all the graphs provided by Chord the bar labeled "3 kHz" is 1.2 kHz instead? I am even more shocked
Пікірлер: 113