Great video. I'm a new technician at a Chrysler dodge jeep ram dealership so still learning the witech system. Good reference if I need it
@jhayk8tv.989
4 жыл бұрын
Awesome presentation I'm working also here in the dealer using the same device.thanks for sharing.
@SuperMarioDiagnostics
5 жыл бұрын
Great video Keith, thanks for sharing 👍
@vencentbauer
5 жыл бұрын
Great video keep them coming
@flatratemaster
6 жыл бұрын
Awesome video Keith!
@L1Training
6 жыл бұрын
Thank you very much! This means a lot coming from you!
@jyd496rr
Жыл бұрын
do you have a FCA video on the importance of VSRs and where to find the documentation on which claims - LOPs will need A vehicle Scan Report Would be real usefull. Thanks
@driftersgonewild710
4 жыл бұрын
Can you use a apple tab to run witech 2.0 with the micro pod?
@abdullahalaithan514
3 жыл бұрын
Hello, great video! We have a chrysler car workshop and my brother offered me a programmer job there. So how do I start learning how to use the witech program?
@slybesker
Жыл бұрын
Can you advise me, can I make ecu ignore some sensors using witech? I need to prepare vehicle for expedition and need reliability, thanks.
@berberitransportationllc5450
4 жыл бұрын
where can i buy this. the lings dont have the one on the video
@toomanyhobbies77
3 жыл бұрын
Question, under a bcm report do you know what sw-year and hw-year mean?
@justtrue8228
6 ай бұрын
PCM vin can change easily with any tool can i change ABS vin ?? And also there is configuration differences code in ABS can i also do configuration??
@L1Training
6 ай бұрын
Banana nut bread has nuts..... sorry thought we were bringing up stuff that has no relation to the video... my bad. Yes it does configurations, its the OEM tool.
@serchbey
4 жыл бұрын
Hi, is that possible to re config in the BCM the park lights of a Jeep Cherokee KL that has the park lights as a German standard (one side or the other with the turn lights commutator) to change that both sides light att the same time? Thank you.
@Dragon2238552
5 жыл бұрын
If I'm using a CarDaq that's already approved by witech 2.0 for aftermarket will the online witech work? Or is the online witech strictly only for the micropod? Need to work on 2018+ vehicles that have the SGM. Thanks
@L1Training
5 жыл бұрын
Yes it will work for online WiTECH2 J2534
@joedefreitas4490
5 жыл бұрын
To piggyback on this comment, with witech can you gain bidirectional controls without removing the SGM?
@L1Training
5 жыл бұрын
In order to access bidirectional control or any function other than reading codes on a 2018+ SGM with witech will require an additional techauthority subscription.
@joedefreitas4490
5 жыл бұрын
Shoot that beats the heck out of searching and removing those goofy things! Thank you for your response and taking the time to put out these videos! 👍
@philh9238
4 жыл бұрын
I just sent the approval to Chrysler today for my cardaq now waiting for the 2 days to get approved. Have you used your cardaq to flash anything on witech 2.0 if so how is it working
@martink.4659
5 жыл бұрын
Hy, i have a question. Just purchased a durango and added a trailer hitch to it, come to find out a dealer has to activate the electrical part of it. Not paying a dealer one hour labor for that job, so i went and got me a micropod2. I find the ecu configuration and see all values but how can i change them?? Thank you
@L1Training
5 жыл бұрын
Your clone chinese micropod will do you no good. You must call the dealer and ask them to add that option to your VIN, then use a active micropod logged into a active witech account and perform a configuration resrore on the module. Then it will function.
@martink.4659
5 жыл бұрын
Thank you!
@attitude1357
4 жыл бұрын
Will this work on a 2000 ram 1500 5.9 magnum to fuel sync ty
@micha1393
2 жыл бұрын
Hey, great video! One question regarding light settings with WiTech. Is it possible to change it with this program? For instance DRL on in combination with the low beams?
@L1Training
2 жыл бұрын
No.
@nelsongarcia9004
5 жыл бұрын
really good video, i changed abs module on 2010 wrangler, could i reflash pcm to vin match with micropod or must be with j2534 passthrough?
@vencentbauer
5 жыл бұрын
I am getting wytec really soon here so on the new 2.0 I can use my tablet wireless???
@L1Training
5 жыл бұрын
Yes
@StanleyOrloff
4 жыл бұрын
Is it possible to change configuration? For example delete rear O2 sensors?
@96LS1S10
3 жыл бұрын
No. That is tuning software. This is diagnostic software.
@StanleyOrloff
3 жыл бұрын
@@96LS1S10 Which tuning software can do that?
@brucethompson6317
4 жыл бұрын
Can a used skreem module be used on a 2006 Jeep Grand Cherokee Limited??
@96LS1S10
3 жыл бұрын
No.
@DBLOCK150
5 жыл бұрын
Does the wiTech work on 2016 cars ?
@L1Training
5 жыл бұрын
Yes, it is the most current tool used in the dealer, it covers 2010ish up to current. There is a chart on the Chrysler site showing which tool, covers which models.
@96LS1S10
3 жыл бұрын
Witech is used in cars 2006-current. SOME 2005's.
@viridian6903
2 жыл бұрын
Does the pasthru devices support this sw?
@L1Training
2 жыл бұрын
Yes, this software does support many different pass thru devices. But not all.
@viridian6903
2 жыл бұрын
@@L1Training does the vax nano gm can be used as passthro device for reflash
@jacek2245
3 жыл бұрын
Does willtech 2 will work on Jeep Grand Cherokee 3.6 2018?
@L1Training
3 жыл бұрын
Yes, it is the factory tool for ALL 2008 and up FCA products.
@rodger6940
3 жыл бұрын
Hey my please tell me if I canor where I can buy this tool
@L1Training
3 жыл бұрын
submgr.am.fcawitech.com/login.htm
@rodger6940
3 жыл бұрын
Can you please advise me if this tool is good to buy it Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.17 With DELL D630 or Lenovo T420 I found it on line
@L1Training
3 жыл бұрын
If you are not buying from the OEM it is pirated or hacked software.
@rodger6940
3 жыл бұрын
So you think it wont work I'm having the code p167a mismatch and I want to buy the tool to reflash the transmission or update the software if it needs it. I work on cars but I'm not a professional I have learn a lot from a lot of mechanics here in KZitem thanks for your time and help bro
@rodger6940
3 жыл бұрын
How much is the tool or how much did you pay for it?
@sev7en
2 жыл бұрын
can i do proxy aligment for jeep cherokee kl 2018 ?
Пікірлер: 52