Check out my other DIY living room projects here: kzitem.info/news/bejne/uX-VwIGjZpqeqGk
@noeltravis7731
4 жыл бұрын
What edge guide are you using for you router
@731Woodworks
4 жыл бұрын
It’s the one that came with the Ridgid cordless router.
@toddbarnier4175
4 жыл бұрын
Hi thanks for the videos I'm looking to try to start up kind of a home business maybe semi-retire been working in factories for 30 years going to give it a shot thanks for your videos
@731Woodworks
4 жыл бұрын
Go for it!
@toddbarnier4175
4 жыл бұрын
one more thing I don't know if it's possible but can you show compared to comprable pricing for the items so I can get a general idea thank you
@MrSeaneboy
4 жыл бұрын
It puts a smile on my face when a man says..."Im proud of it" Take pride in your creations...it's the warm fuzzy you get after a job well done. Cheers 731 woodworks!
@731Woodworks
4 жыл бұрын
Thanks!
@bradbrown2199
3 жыл бұрын
I think you have one of the finest woodworking channel. Great pacing. Enough instruction but not redundant. Great choice of music.
@731Woodworks
3 жыл бұрын
Wow. I appreciate that
@BarneyGumbl3
3 жыл бұрын
Fully agree, I had watched half of his videos before I realised he only had 80k subscribers. I see big things in your future 731
@731Woodworks
3 жыл бұрын
👊🏻
@Troy-Echo
3 жыл бұрын
I have to agree with this too. I've only watched a few of Matt's videos, but he does a great job of not wasting a lot of time. One of the most annoying things I find on KZitem is posters putting up a 25 minute video, but there is honestly only 10 minutes worth of content. I watched a video a week or so back and the poster had mentioned he needed a certain tool, and went to grab it, and it wasn't where he thought it was. So instead of editing this out, he left in the video while he looked through most of his cabinets and drawers. He knew it was waste of time because he edited that portion to be time-lapsed so it didn't waste "as much" time, but to me, if you have to time lapse something like that, it should be a good clue to just entirely cut that part out. I've never seen Matt waste time like that. He will time-lapse a portion of video and then do a voice over to briefly explain what is happening to save time, which I greatly appreciate. I think Matt does an excellent job of including enough information so most wood workers can complete the task well, and expresses this in a time-conscious manner.
@bradbrown2199
3 жыл бұрын
@@Troy-Echo Exactly,
@greatgrandpaswoodworking
4 ай бұрын
This seams to be an annual event. Back again for a refresher course. Making another table for my grandson.
@r3woodcraft
2 ай бұрын
Your board butter works great also. Been using it for many years on toys and it holds up great.
@bigkw
4 жыл бұрын
Matt, I love your videos. They're all no nonsense. It is what it is. That's the way I like it. You're a good teacher. I just want to thank you for documenting what you do, and then editing your videos. I don't know much about editing, but I'm sure it's as time consuming as the build itself. I just want you to know, I truly appreciate learning from you. I'm a fifty two year old wannabe, but I'm trying.
@731Woodworks
4 жыл бұрын
I appreciate that. Typically a 15-20 minute video takes me about 6 to 8 hours to edit and post.
@rer1967
3 жыл бұрын
I've seen others building a similar table but yours is, by far, the only one that looks like high end furniture.
@731Woodworks
3 жыл бұрын
Awesome. Thank you
@kh2716
3 жыл бұрын
New to wood work (started last week!) built a planter now looking for more inspiration and help and found your channel. I must say, out of all the communities on YT the wood work community seems really positive and helpful. Thank you for being part of it.
@731Woodworks
3 жыл бұрын
Awesome! Thank you!
@r3woodcraft
2 ай бұрын
Love the white work bench, lol
@rickpotter6755
2 жыл бұрын
If I understand this right you have this coffee table sold already. Do you take a deposit if so at what percentage. The Johnson wax is that just regular auto paste wax. Thanks for your videos you have taught me a lot. At 62 I was hurt on the job and was forced into retirement. I have decided to get into wood working and bowl turning. I watch everything you do 2-3 times because you never stop learning and even though I have worked with wood of some sort all my life I still have a lot to learn. Also thanks for not being afraid to tell everyone that you’re a Christian. This day and time Christian are under attack and a lot of us hide the fact that we are. I am now 66 and starting a new career so keep the videos coming and I’ll keep learning. Thanks your brother in Christ. Rick
@cbrsilv15
5 жыл бұрын
I've used different poly's in the past, but the satin finish you use looked so awesome that I had to try it. I ordered it from Rockler as well as the table top fasteners you use. There isn't a harsh smell at all and after 3 coats (sanding in between with 320) it came out fantastic! Thanks for showing us that, and I would HIGHLY recommend anyone to try the General Finishes topcoat.
@731Woodworks
5 жыл бұрын
That’s great to hear! So glad it helped you.
@johnjackson-pu3xo
2 жыл бұрын
I love those stove tops, believe me I can use all the extra space I can get
@peanutpower8826
3 жыл бұрын
Those x’s are the Bain of my existence! Can’t ever get them to come out perfect
@731Woodworks
3 жыл бұрын
It’s tough
@ibrahimyacoub7390
3 жыл бұрын
Thank you so much for the videos you're a true inspiration starting my first woodwork this week and its all because of your positive talking God bless you and your family keep the good work coming
@731Woodworks
3 жыл бұрын
Glad to hear it! Let me know how your project turns out
@buba2isatosa
4 жыл бұрын
Heck ya brother you should be proud your work is incredible! On a side note your also an amazing marriage counselor without even knowing! With your videos you make it possible for guys like myself to create these projects to impress my wife the entire time taking all the credit telling her I just whipped it up off the top of my head when in reality it took me between 10 and 67 times of watching your videos🤣 All jokes aside thank you for sharing your knowledge with all of us that may have the tools to do these projects but lack the knowledge! You have gotten a new and thankful subscriber.
@731Woodworks
4 жыл бұрын
🤣 I appreciate the kind words!
@greatgrandpaswoodworking
2 жыл бұрын
Back again for a refresher course. I'm making another one for our daughter. Great instructions.
@731Woodworks
2 жыл бұрын
Awesome 👏
@thanosandartemis5761
3 жыл бұрын
As a new woodworker your channel is a great help.
@731Woodworks
3 жыл бұрын
Glad to help
@dirtybaywoodshop-joeporter5650
4 жыл бұрын
I love how the table came out! I just delivered a rustic dining table to a customer last weekend and they have already ordered a matching coffee table. I'll definitely be using some of the tips I learned in your videos. I used a satin lacquer finish for the dining table, but I didn't put any paste wax on it. I may try it with the coffee table to see how much better it comes out. Thanks for the great videos!
@731Woodworks
4 жыл бұрын
Awesome. Glad the video helped.
@davidrock3936
4 жыл бұрын
To the Op: As far as 'grain popping'. You could try and hit the base with a light coat of brushed water and let it dry before applying paint.
@bertalmazan9312
3 жыл бұрын
God bless you brother! Thank you so much for your humble attitude as you share your knowledge with us.
@731Woodworks
3 жыл бұрын
Thank you
@Azntoo60
3 жыл бұрын
Nice table. I’ll be making table like this for my patio. At work we throw away 4x4x4 hard heavy woods used to strap heavy steel coils. I’ve been taking them home about 8 pieces a week. So far i have collected over 100. I’ll be using those. I should get into this business since i get woods for free!!!
@731Woodworks
3 жыл бұрын
awesome
@russmartin4189
4 жыл бұрын
I just subscribed. I like you. You are relateable, show a lot, and tell your secrets. One of these days I will get around to building some of "your" projects. I have all the tools that you showed and more, so I'm good to go.
@731Woodworks
4 жыл бұрын
Awesome! Thanks for subscribing.
@buckman82
4 жыл бұрын
Awesome man!! Love the way you use to distress that’s so simple! Can’t wait to get a miniature of these for night stands. Gonna do a headboard and maybe bed frame for our master bedroom. Super stoked to have found your channel!
@731Woodworks
4 жыл бұрын
That’ll be awesome
@1927Scavengers
3 жыл бұрын
I built the blanket ladder today. I sanded then lightly torched it and gloss poly. Looks great. I also made the sides to this table. Ended up having to get a miter saw. 12” Rigid compound sliding blah blah. Need a few supplies to finish up this table build. Thanks for the inspiration and clear instructions.
@731Woodworks
3 жыл бұрын
Awesome
@dewayneanderson3439
3 жыл бұрын
Thanks for the video brother I copied these plans and built one for my wife today she absolutely loves it
@731Woodworks
3 жыл бұрын
Great 👍
@marlontomera
3 жыл бұрын
Hey one way to save you from having to cut those cross member pieces, you could mark the angle that your using and do a half lap joint instead.
@731Woodworks
3 жыл бұрын
thanks for the tip!
@jgriff19861947
Жыл бұрын
Nice work looks good glad you brought up the cedar fence all ways forget about using them but I won's next time
@garyschneider1782
Жыл бұрын
My 6 year old loves it
@jbab56
3 жыл бұрын
This is definitely a project I want to try, its just beautiful. One question though, can you use pocket holes and screws for the breadboard ends instead of dowels?
@731Woodworks
3 жыл бұрын
It’s not recommended because of the wood movement may cause it to split
@4everabeast79
4 жыл бұрын
How much did you sell the table for? Great looking table btw!!
@731Woodworks
4 жыл бұрын
Thank you. For this size they are $350.
@4everabeast79
4 жыл бұрын
@@731Woodworks ok. Thanks. You've inspired me to do more!! So far I've made CORNHOLE boards, serving trays and a custom for cabinet for my man cave. Definitely want to get into making tables. Quick question, do you have to add those bread ends to that table? Is it for a look or stability purpose? Also, for you have to use those brackets that you made the slots for or can you just do more pocket holes for all of it?
@731Woodworks
4 жыл бұрын
@@4everabeast79 Bread board ends are just for looks. It is not recommended to pocket hole the table top to the frame due to it restricts natural wood movement. There are some fasteners called figure 8 fasteners that don't require cutting slots.
@raymondkirby9100
4 жыл бұрын
Matt, is that $350 for the coffee table, alone right?? How much for the two end tables, for one & the pair??
@731Woodworks
4 жыл бұрын
I’d go $125 each on end tables at least.
@jonspringhorn5224
3 жыл бұрын
This guy doesn’t miss!! Bravo sir.
@fabiomerlin8820
10 ай бұрын
Man...that will help me a lot for my current project. Those Breadboard ends. Thank you
@barrywuthrich8530
11 ай бұрын
Thanks for this video. I'm going to start on this tomorrow.
@arleneaugustahair8393
Жыл бұрын
I’m obsessed with this table. I want to make one for my son. I’m going to try to make most of his furniture when he gets his house. I want him to have hand made pieces.
@seanmikkelsen7795
3 жыл бұрын
I just picked up a sprayer with your affiliate link. I've referred back to this video many times for a project i'm working on. I really appreciate your time and effort to share with us. Thanks a bunch!
@731Woodworks
3 жыл бұрын
I really appreciate that
@jamessquibb7433
Жыл бұрын
Great Video. I did a 3 wood RV Table with Breadboard ends and Live edge. How you installed the ends is exactly how I did mine. Thank you for the video..
@normagutierrez6082
4 жыл бұрын
So beautiful coffe table
@731Woodworks
4 жыл бұрын
Thank you
@codybryant8684
5 жыл бұрын
So glad you didnt pocket hole those breadboards because thats just asking for trouble. Now all you need is a biscuit jointer and start glueing your table tops together and brother your in business. Great video you have come a long way. Another tip after you sand if you will take mineral spirits put it on a rag and wipe down your top it will take all the dust off and it will show any imperfections before you stain. Just let it dry and then stain it wont hurt it at all
@731Woodworks
5 жыл бұрын
Thanks! Yes, I need to get a biscuit jointer soon!
@codybryant8684
5 жыл бұрын
@@731Woodworks i have the makita one it is expensive but works great. However i had the ryobi one and it worked just fine. Also i have those same harbor freight clamps check out paul sellers video on retro fitting them i did it to mine world of difference
@731Woodworks
5 жыл бұрын
Thank you for the info! I’ll check it out
@jorgetoloza269
3 жыл бұрын
Just wanted to let u know that I like your channel very much..keep these videos coming...thank you much
@731Woodworks
3 жыл бұрын
I appreciate that
@douglasbell4704
3 жыл бұрын
Looks great
@731Woodworks
3 жыл бұрын
Thanks!
@carlarodriquez1006
3 жыл бұрын
I like the way you explain it!! You don't use a bunch of words I've got 2look up first
@731Woodworks
3 жыл бұрын
thanks
@dcaudio1
3 жыл бұрын
I absolutely love your videos....super cool guy who just comes off a real genuine person. Thanks for the videos and yes I am so building that table for by baby girl (wife)....she will treat me so good...if you know what i mean. Lol....cheers..
@731Woodworks
3 жыл бұрын
👊🏻
@goodvolks2know372
Жыл бұрын
I LOVE you work and plan on using your plans for some end tables and a coffee table in my living room. Thanks for showing your process.
@waldorodriguez2517
3 жыл бұрын
It would've never crossed my mind to use a steel wool on a finished top. Great tip. That is a beautiful piece if furniture. Great job brother.
@731Woodworks
3 жыл бұрын
Thank you very much!
@charlesray3656
2 жыл бұрын
I liked the way you used the wax after you used the Polyurethane.
@barbarawade7214
Жыл бұрын
Love the tables and noodle board.BEAUTIFUL WORK!!!!!
@davidhatchett3856
3 жыл бұрын
Thank you for inspiring me to make a version of this and start an Etsy shop. I just sold my first project.
@731Woodworks
3 жыл бұрын
Congrats!
@rprzpnting
9 ай бұрын
Beautiful
@donavanmcelroy6263
3 жыл бұрын
How smooth?? BUTTER smooth! 😜
@731Woodworks
3 жыл бұрын
👊🏻
@jameshale7282
4 жыл бұрын
just finished this table and brought it home. your info and descriptions were very helpful. good job. my table turned out great absolutely love the wax finish
@731Woodworks
4 жыл бұрын
Awesome to hear!
@chrisswaney9600
3 жыл бұрын
Love this table, my wife loves it as well so I am in the process of building her one. I just have to build the top now, I had a to built but she didn't like the color of the stain so I painted it grey and she don't like that either 🤦♂️ so now I just build a whole new top.
@731Woodworks
3 жыл бұрын
Ha.
@scottswannie2500
2 жыл бұрын
Just finished the build on this table. Turned out really nice. I used everything you recommended and it went pretty smooth. My wife’s birthday gift and she loves it. Thanks for the video and advice. That paint sprayer did work well.
@731Woodworks
2 жыл бұрын
Great to hear!
@zimpler8340
2 жыл бұрын
I like that you let us know the names of what products you use!
@brianuphill4370
3 жыл бұрын
Fantastic work love it and the way you make people feel that they could all do the same.
@731Woodworks
3 жыл бұрын
Thank you very much!
@MicheluceRizzuto
4 жыл бұрын
Great project for my new home. I’m hopeful to close on the 28th of August, if all goes well with the closing. It should. I’m going to make the same tables except for just a little larger. The rooms are massive. The living room is 23x15 and the bedrooms are 18x16 and 18 x13. It’s got a very large basement/rec room downstairs 23x28 that I can use as my wood working shop and upholstery making station. You and some other you tubers have inspired me to create my own furniture seeing how easy it really is. And how much money it will save me too. I saved a lot by making my own kitchen cabinets in this house I’m in now. I did all the moulding myself too. No reason I can’t make my own furniture. Thanks
@731Woodworks
4 жыл бұрын
Sounds great! You will save a ton of money doing it yourself
@naturallycurlymama5344
3 жыл бұрын
Really nice work having my husband watch to build one
@brianbelliveau5551
2 жыл бұрын
Nice job looks good 👍
@cheryltaylor107
2 жыл бұрын
Coffee table came out beautiful!!
@731Woodworks
2 жыл бұрын
Thank you!
@backpropalgo
2 жыл бұрын
Your videos are amazing
@hillbilly59apache59
3 жыл бұрын
I am happy for you it looks awesome
@wisconsinwoodsman1987
3 жыл бұрын
Started making a lumber list to make this. Wow, have wood prices gone up. Can’t even find non-treated 4 x 4s in my area. Nuts.
@blake102989
3 жыл бұрын
It keeps climbing too.....
@blake102989
3 жыл бұрын
Go on Craigslist or Facebook marketplace and see if anyone is giving away old or scrap
@JG-av8r
5 жыл бұрын
Great tips and techniques with all of the different products used on the project. I have to watch it again to write everything down. Enjoyed it.
@731Woodworks
5 жыл бұрын
Thanks! I'm glad it was helpful!
@lundimayhew5723
3 жыл бұрын
Very nice 👌
@731Woodworks
3 жыл бұрын
Thank you
@phoenixmacallan763
4 жыл бұрын
Beautiful table brother. You know what you can do? Put a divider between the top and the base, that way it can double as a bookshelf. I think people would like that. God bless.🙏🏻👍🏻
@731Woodworks
4 жыл бұрын
Good tip! Thank you
@phoenixmacallan763
4 жыл бұрын
@@731Woodworks You're welcome brother.🙏🏻👊🏻
@mirickarries
2 жыл бұрын
Thank you so much. Truly Appreciated. I learned a lot
@gergemall
3 жыл бұрын
Thank you Matt
@731Woodworks
3 жыл бұрын
You're welcome
@joeymccullough2716
2 жыл бұрын
Beautiful table! Very descriptive video narration
@greenmouseguard
3 жыл бұрын
Absolutely Gorgeous
@731Woodworks
3 жыл бұрын
Thank you!
@ursulajackson640
4 жыл бұрын
I could watch you build all day 😉👍🏽
@731Woodworks
4 жыл бұрын
Thank you
@thedieiscast9729
3 жыл бұрын
Great channel ,thanks
@731Woodworks
3 жыл бұрын
Thank you
@sammyeverhart
3 жыл бұрын
Just getting into woodworking and have watched a lot of your videos! Thinking about trying to build this for my mom for Christmas!
@731Woodworks
3 жыл бұрын
Go for it!
@sebastianschmid2985
4 жыл бұрын
Thank you for taking the time to make this tutorial and answer all the questions. I just made mine and wouldn’t have turned out this good without your guidance.
@731Woodworks
4 жыл бұрын
Thank you. Glad it helped you out!
@cjwilson9493
3 жыл бұрын
Beautiful brother! Well done!
@731Woodworks
3 жыл бұрын
Thank you
@dnvnd88
4 жыл бұрын
Awesome tutorial. I just finished mine, but I used a section of reclaimed bowling lane floor. Came out awesome. Thanks for the help.
@731Woodworks
4 жыл бұрын
I bet that looks awesome!
@bradymiguel
2 жыл бұрын
I kind of enjoy sanding large panels by putting something good on the airpods and I find that it slows me down and steady. I basically go on autopilot for awhile. 😂 I usually start at 80 grit instead of starting with 120 and having to focus every here and there. I love your channel man! Just finishing a batch of Matthew Peech’s plans. Looking forward to building some of yours this summer!!!
@BigmoRivera
4 жыл бұрын
Great Job Nicely Done Looks Very Solid
@731Woodworks
4 жыл бұрын
Thank you! It's a beast
@vcap7886
2 жыл бұрын
Don't often hit subscribe but your videos are great! Keep them coming!
@731Woodworks
2 жыл бұрын
I appreciate that!
@tonylozano8574
4 жыл бұрын
I like your videos, they have great details. Found you via you tube algorithm recommendation and glad it did. As a time saver, plus I hate finishing wood, I've been using laminate flooring, that looks like a finish I want as furniture. For example "Pergo Seabrook Walnut 10 mm" or "Thornbury Oak 10 mm" found at HD. Lowes has some good stuff too. It should be at least 10mm thick. Which is about 3/8" thick. I would nail it to 1/4" or thick plywood, plus glue. Surprisingly laminate has some great durability qualities. Of course it may not be what your clients would like, but I use it for my home projects. My personal opinion is it looks really good with accent colors. Maybe other viewers would be interested. Thanks.
@731Woodworks
4 жыл бұрын
Neat idea!
@64maxpower
3 жыл бұрын
That came out excellent. Had it couldn't be any more simple to make. Good work
@731Woodworks
3 жыл бұрын
Thank you
@Mikemm54
4 жыл бұрын
Beautiful table,thank you
@731Woodworks
4 жыл бұрын
Thank you! 😊
@channel34mil
3 жыл бұрын
Great job! You are a master craftsman. Thank you for sharing your project.
@Mac45_
3 жыл бұрын
New to wood working but found your channel and I like it man. Keep posting content, your learnin me on a few things.
@731Woodworks
3 жыл бұрын
Thank you
@storedaway
3 жыл бұрын
Great build
@731Woodworks
3 жыл бұрын
Thank you
@suegomez241
3 жыл бұрын
I had to subscribe to your channel.. and must say : I’m going to order that Johnson wax .because you claim it’s “Butter Smooth” love the table !
@731Woodworks
3 жыл бұрын
👊
@gsh319
4 жыл бұрын
Great job. Really nice clean work. Thank You.
@731Woodworks
4 жыл бұрын
Glad you liked it!
@farmerinthedell7
Жыл бұрын
That is a beautiful piece!
@ronbeard8856
2 жыл бұрын
Awesome job like your videos
@j316finewoodworking6
4 жыл бұрын
Beautiful table. Who actually gave thumbs down? 🙄
@731Woodworks
4 жыл бұрын
Thank you. lol haters gonna hate
@terryrobinson1416
3 жыл бұрын
Great build matt! I'm going to build the coffee bar next, but it's going to be an entry way table.
@731Woodworks
3 жыл бұрын
Sounds great!
@Terkinstein
3 жыл бұрын
It turned out really nice!
@BigPlaneFixer
4 жыл бұрын
Now that is so kool!!! Very nice end product. Sad thing is, I already have ALOT of tools. Not sure I'll be allowed to start buying wood working tools too!!! I'd love too!!!
@731Woodworks
4 жыл бұрын
Thanks! Good excuse to buy new tools if you build our loved ones something with them lol.
@MrJedijunkie
2 жыл бұрын
Very nice
@buckman82
3 жыл бұрын
Wish could post pics, took what you did here and used parts to incorporate into my kitchen island turned out pretty good :) thanks for all the tips and videos!
@731Woodworks
3 жыл бұрын
Awesome
@jaymart2351
3 жыл бұрын
Very, very beautiful work. Wood working is something I been seriously thinking about doing for a long time. Love the videos.
@731Woodworks
3 жыл бұрын
Thank you
@loganhawk2043
3 жыл бұрын
This guy is f’n AWESOME!
@731Woodworks
3 жыл бұрын
I appreciate that
@weberaguilar4588
3 жыл бұрын
*TopFineWoodworking. Com* is an amazing book about woodworking. I`m a graduate of a one-year carpentry course from a local tech college. Of all books I`ve read during my study about carpentry, I think this is the finest book I`ve read so far. It explains everything regarding woodworking as well as complements it with helpful photos.?
@davelakous8708
3 жыл бұрын
Nice build!! Thanks
@731Woodworks
3 жыл бұрын
Thank you
@MrRenoman2011
4 жыл бұрын
Beautiful job thanks for the video
@731Woodworks
4 жыл бұрын
Thank you
@crsullivan1310
4 жыл бұрын
Great job, i think that technique of staining under the white, looks great, ill be trying that out for sure
@731Woodworks
4 жыл бұрын
Thanks
@haskelbowen1967
2 жыл бұрын
Very nice coffee table, great job on it. I've been watching alot of you videos.
@Spread_love01
4 жыл бұрын
Between you and 4 other people. I genuinely subscribe and love the work I see. I’m new in woodworking and finding a love in the game. If you or any of the 4 lived near NYC I would of asked if you would apprentice me. I’m a visual learner so I’m picking up tricks and stuff but you have a great presentation to your work good sir.
Пікірлер: 1 М.