I just wanted to let you know that this is one of the best tumbler tutorials I've seen. That green is so beautiful 😍
@LORIZACHERY64
5 жыл бұрын
Please let me know what you think. I love your videos and the way you explain everything! I am doing my very first tumbler right now. The first coat of epoxy is dry but I see some teeny tiny indentions on a few specks of glitter. OCD.... lol. Is that normal or do you know what i did wrong ? Should the 2nd coat of epoxy fill those in?
@123434rachel
4 жыл бұрын
If you were using chunky glitter, how much epoxy would you add to cover it? For the first coat of epoxy. Do you add it until you don’t feel the chunkiness anymore? or do you just do enough to get epoxy on and then add a coat again after it dries?
@carriemcarthur2121
3 жыл бұрын
I didn't let my Mod Podge dry before spraying the adhesive. I think you said the Mod Podge will dry clear even after spraying the adhesive. Am I right? Thank you...Carrie
@Britneymphotography88
4 жыл бұрын
love the color of the cups it match my room lol :) and those glitter they seem to work for me too
@irishannie66
6 жыл бұрын
FYI.... The green label loctite does not do the stringy thing like the red does. Thank you for taking the time to make this video. You are really easy to follow.
@anchoredtogetherdesigns54
6 жыл бұрын
Irish Annie thank you ❤️ I’ll have to try that one! I’ve also started using crystal clear by rustoleum
@melissabush5418
6 жыл бұрын
Do you use loctice spray adhesive as a sealer?
@anchoredtogetherdesigns54
6 жыл бұрын
melissa Bush I use crystal clear enamel
@ruggedrickrude1946
6 жыл бұрын
iRish pRide ! ! !
@dhightide
5 жыл бұрын
so you are using Loctite as a sealer for your glitter?
@Barbie08081
5 жыл бұрын
I have the same question
@dhightide
5 жыл бұрын
@@Barbie08081 i use loctite to apply my glitter,, then seal with clear spray paint.. thats why i was wondering.. lolo
@angelabollman7671
5 жыл бұрын
What do you use to sand when doing this? Love the vids btw!
@lindsaywest8757
5 жыл бұрын
Do you sand your cups during prep? I did a wine tumbler my first cup and when sanding around the rim after two coats of epoxy the glitter seems like I could just peel it right off if I tried!
@itzannamysanchez9518
4 жыл бұрын
So pretty! Thanks for the tutorial!
@laurenatwood
5 жыл бұрын
Did you put two coats of glitter? I noticed the green was further down on the cup you already had ready. Did you do a second coat of glitter on the original cup then brought the green down a little further? (If my question makes sense)
@j-hoss8980
4 жыл бұрын
Thanks for this tutorial! I’ve been struggling with applying chunky glitter.
@anchoredtogetherdesigns54
4 жыл бұрын
Jrock Jen let me know how it turns out
@hollylouyathebutterflyexpr8567
5 жыл бұрын
How do you clean up the inside of the cup if you get epoxy or anything else inside it?
@Orgprettym
6 жыл бұрын
Loved this video. Just wanting to get into trying to make cups and you make it look so easy!
@alyssiacunningham16
6 жыл бұрын
Hello! The video was great, thank you! I was just curious what you suggest in regards to the spinner that you use at the end of the video. I am not sure if I could get access to anything like that and was wondering if there is any alternatives that you know of. I was also wondering how long you leave the cups on there. Thanks again and I hope you are doing well!
@halrit148
6 жыл бұрын
Do you have to use a spinner? I just got all of the supplies today to try it this week. Also, I got the "Easy Cast Clear Casting Epoxy" from Michaels, is that the same thing? So many questions... Lol
@anchoredtogetherdesigns54
6 жыл бұрын
Hal Rit hey! I do have a spinner. I use pro marine epoxy. Email me if you have questions kristin.tufo@gmail.com
@lizzyjo7454
5 жыл бұрын
Great tutorial!! How do you like the Pro Marine?
@whitneymichelle8300
6 жыл бұрын
Where do you obtain epoxy? I wanted to make one of these a few months ago and couldn't for the life of me find epoxy! Lol. Also, where do you find white mugs like that?
@anchoredtogetherdesigns54
5 жыл бұрын
Whitney Michelle any craft store or Amazon. Here is the link to what I use Crystal Clear Bar Table Top Epoxy... www.amazon.com/dp/B0788HYTN3?ref=yo_pop_ma_swf
@luperamirez1909
5 жыл бұрын
did you glitter the bottom and or epoxy the bottom of the tumbler.
@nathaliaarreguin7406
5 жыл бұрын
where do you buy your tumblers?
@marieche5909
6 жыл бұрын
Love the video! So helpful. I have been wanting to start making my own but not sure where to get the tumblers. Can you tell me where you get yours at?
@anchoredtogetherdesigns54
6 жыл бұрын
Mari Eche Walmart or Hogg
@neurologylove2135
6 жыл бұрын
You can get them super cheap at TJ Maxx and Ross also if you are in the states.hobby Lobby also carries them!
@auntmisty2210
6 жыл бұрын
Can you please tell me what kind of epoxy you are using and where you buy it. I am having the worse luck finding stuff that doesn’t immediately dry
@anchoredtogetherdesigns54
6 жыл бұрын
Misty Brandenburg Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon Kit www.amazon.com/dp/B01LYK2NAG/ref=cm_sw_r_cp_api_7EhLBb7A80T7Y
@peggychezik2176
5 жыл бұрын
Would it be easier if you used your turner while you do the glittering. Love your cups.
@ocean82094
6 жыл бұрын
I used this method on a wine tumbler and after an hour I checked on it, all the chunky glitter slid up! I was thinking it was too late to move. Any recommendations?
@crystalduran3993
6 жыл бұрын
Where do you get your tumblers? Trying to make them for a family reunion, Do you sand so there's no hard thick line?
@stefanyjohnson2971
5 жыл бұрын
Do you dry or wet sand your cups like this? Thank you!
@lindsey820
5 жыл бұрын
This was so helpful, thank you.
@ravenmartin2325
5 жыл бұрын
How much epoxy did you use in this video?
@jessicablevins3766
5 жыл бұрын
Where did you get your spinner? I want to make these for our basketball team as a fundraiser - (free work LOL) but I have no clue where to get the cool turning thing.
@mayamckinzie2460
5 жыл бұрын
Jessica Blevins I saw a tutorial for a really easy DIY one on Pinterest!
@mattb4890
5 жыл бұрын
You buy a rotisserie turner at Home Depot or where ever will need wood and pvc pipe and football for best results
@amyvanrijn1116
5 жыл бұрын
Hobby lobby has it
@rosieshores7320
5 жыл бұрын
Sorry to be the bearer of bad news but according to the manufacturer of your epoxy it is not food grade and if it gets hot it can turn soft. Please always check with your manufacturers for food safety.
@melabarnes7794
6 жыл бұрын
I absolutely love this cup!!!!!
@anchoredtogetherdesigns54
6 жыл бұрын
mimi b thank you
@amytripp6361
6 жыл бұрын
Love your tumblers! How do you seal the top rim of the tumbler smoothly without the epoxy falling down into the cup?
@anchoredtogetherdesigns54
6 жыл бұрын
Amy Tripp I’m messy lol I just clean after
@ChanelleAngelina
6 жыл бұрын
Hey there! So I'm making a tumbler for the first time EVER. I used some flaky glitter and have already sealed it with the clear sealer spray. It looks EXTREMELY chunky and flaky right now and I'm not sure how the epoxy will even lay if I apply it over this flaky glitter...I'm just wondering if I should even bother with the epoxy now or just start over on a new one?? HELP! =))
@anchoredtogetherdesigns54
6 жыл бұрын
Chanelle Angelina you might have to push some down with your fingers. You will have to sand and do several layers
@jamiedendy9791
5 жыл бұрын
If you mix your two glitter colors together, and sprinkle that over the middle where the two meet, you get a better ombre effect
@kthomas1421
5 жыл бұрын
What exactly is the loctite used for before epoxy? To secure glitter from falling off?
@anchoredtogetherdesigns54
5 жыл бұрын
kthomas1421 if you use the modpodge method. Yes
@staciemerritt1643
5 жыл бұрын
What kind of white spray paint do you use?
@anchoredtogetherdesigns54
5 жыл бұрын
Stacie Merritt I like rustoleum 2x
@tdb12269
6 жыл бұрын
I have a Tumblr already painted. Can I put glitter on it? Thanks for the video.
@anchoredtogetherdesigns54
6 жыл бұрын
Traci Blackstock yes
@krislynreaves3466
6 жыл бұрын
Traci Blackstock if it’s painted yes, if it’s powder coated then I wouldn’t suggest it. Modpodge don’t stick very well to powder coated cups...
@stephaniestrader8435
6 жыл бұрын
When do you sand it? I'm going to get the stuff tomorrow to try this. Also how can I do this without a turner?
@anchoredtogetherdesigns54
6 жыл бұрын
Stephanie Strader I sand after about 8-12 hours and yes u just have to flip it every 5 min for the first hour and do a thinner coat of Epoxy
@allergynurse1
6 жыл бұрын
I made a tumbler but how did you make sure it doesn’t wobble? Why do you have all those popsicle stickers? Can you show me what is inside the cup? What do you have holding the tumbler? Love the tumbler
@hiphopilove7041
6 жыл бұрын
Debbie Vieyra you can get a "nerf" football from dollar tree.
@denacarson32
6 жыл бұрын
Popsicle sticks are usually to stir.
@MonicaMiller-ji4tq
6 жыл бұрын
Pool noodle....
@tanyelluren5823
5 жыл бұрын
@@denacarson32 ķî unit kr got*
@dawnitag1741
6 жыл бұрын
Where do you get your epoxy? Also the spinner for your cup? Thanks!
@neurologylove2135
6 жыл бұрын
People sell spinners on Etsy. You can get the epoxy off Amazon, and select Michael's stores sell it too.
@kimberlygarcia7701
5 жыл бұрын
Do you get bubbles in your epoxy?
@LipsByTeresa
6 жыл бұрын
Where did you get the thing that holds your cup and moves it? What epoxy do you use? Is it dishwasher safe? Thank you love your video
@anchoredtogetherdesigns54
6 жыл бұрын
LipsByTeresa i made it with a grill rotisserie. I use pro marine Epoxy and no stainless steel tumblers are not recommended to go in the dishwasher as it breaks down the insulation. Thank you :)
@LipsByTeresa
6 жыл бұрын
Vinos and Vinyls thank you😗
@TanishaChaudhry
6 жыл бұрын
Can these be used as normal drinking tumblers??
@anchoredtogetherdesigns54
6 жыл бұрын
Tanisha Chaudhary yes the epoxy is fda food safe
@ralphseidler8893
4 жыл бұрын
Get video I’m starting to do hydro dipping my tumblrs . Were can I get the spinner for the tumbles . I like the lock tight
@BeYourOwnBossMonica
5 жыл бұрын
Where can I buy my tumbler cups in bulk?
@tishwilson3864
6 жыл бұрын
I tried this I messed up want to strip my cup and try this method & spray base coat white will the cup be ok to reuse? Is the font you use on Dafont?
@isabellamccormick5459
5 жыл бұрын
Where did you get your cup turner?
@rachelfreiheit7087
6 жыл бұрын
What kind of sandpaper do you use? Could you link everything for me! This is super helpful tutorial!
@anchoredtogetherdesigns54
6 жыл бұрын
Rachel Freiheit I use 200 150 and 100 grit
@rachelseeley229
6 жыл бұрын
If you get epoxy in the inside of the cup how would you recommend cleaning that?
@wendithomas709
6 жыл бұрын
When I got a drip or two I just used my pick tool and plucked it right off :)
@krislynreaves3466
6 жыл бұрын
Or acetone! But picking if off works to! But sometimes I get it like on the bottoms of cups I don’t want epoxyed on the bottom and I wipe it off then it leaves what I call “epoxy lines” and the acetone works best for me so I don’t scratch the bottoms of the cups...
@colleenchopp9041
5 жыл бұрын
Ty ty ty!!! I was wondering why my cups looked crappy...now I know what to do...
@missgoalkeeper22
6 жыл бұрын
Hi Kristen! can you tell me where you bought your rotisserie motor??
@anchoredtogetherdesigns54
6 жыл бұрын
Amanda R a friend made it for me
@auntmisty2210
6 жыл бұрын
I have seen people sell the special made ones on Etsy! They even hold cup special and you can buy a one cup turner or even more like 6 cups turner
@emilyschroeder1887
6 жыл бұрын
How much do you have to sand with the chunky glitter? And what do you use to sand? Thanks! :)
@anchoredtogetherdesigns54
6 жыл бұрын
Emily Schroeder it depends on how think you put the glitter on and if you make sure it all lays flat I use 220 150 and 100 grit
@1nonlyMyMy
5 жыл бұрын
where can i get the white cups??
@caitlyndeitle7238
6 жыл бұрын
What grit sand paper do you use?
@casiewhite8049
5 жыл бұрын
Every time I put chunky glitter on with epoxy it moves up the cup. I can’t seem to figure out it not to move! Help please!
@kristenwest1212
6 жыл бұрын
Girl I have no clue how you glitter the whole cup using two different colors without the mod podge drying!!! I always have the worst time with mod podge!!! But I am also still very new to this!
@anchoredtogetherdesigns54
6 жыл бұрын
Kristen West yeah I just go super fast. Sometimes it does dry but when I do the second coat I get coverage.
@shankelia14
6 жыл бұрын
Try doing it in sections instead of the applying the mod podge over the whole surface area.
@adaamor4463
6 жыл бұрын
Spray adhesive works well..
@bella4135
6 жыл бұрын
Super helpful video and your cups look awesome!
@themakerbarn8777
6 жыл бұрын
Use a pool noodle to keep your arm from being "sealed". Thanks!
@judichristopher4604
6 жыл бұрын
Great idea
@britneyv35
6 жыл бұрын
Have you had anyone complain that the epoxy and glitter come off while drinking from the cup? how do you prevent that from happening
@BMichelleCustomz
6 жыл бұрын
Approximately How many cups can do like the ones you’re doing with that jar of silver glitter? (For the bottom portion of the cup)
@anchoredtogetherdesigns54
6 жыл бұрын
Bobbie Pitts about 4
@apppleass22
5 жыл бұрын
Where do you buy your decals and your turner
@anchoredtogetherdesigns54
5 жыл бұрын
Daisy Fielder i make my decals and I made my turner too.
@Carleybeautygirl
6 жыл бұрын
Are these dishwasher safe? And where do you buy your cups?
@tiredmilky8416
6 жыл бұрын
Yes you can dishwasher them
@neurologylove2135
6 жыл бұрын
No!!! You are not supposed to dishwash them!!!!! It ruins the vacuum we all and insulation and runs down the epoxy!
@7o4o
6 жыл бұрын
Do you use a heat gun or embossing gun at all?
@juliatoadvin337
5 жыл бұрын
How do you get the epoxy off of the inner rim of the cup?
@anchoredtogetherdesigns54
5 жыл бұрын
Julia Toadvin a razorblade
@marisolcampos1820
6 жыл бұрын
I want to buy one off u?? How can inget should of u??
@anchoredtogetherdesigns54
6 жыл бұрын
Marisol Campos you can find me on my Facebook group m.facebook.com/groups/1711487782500601
@jessicachateau9655
5 жыл бұрын
What’s holding the cup on to the rod?
@jenbisti8198
6 жыл бұрын
Do you have to tape off the top when you spray paint?
@anchoredtogetherdesigns54
6 жыл бұрын
Jen Bisti no I put my football stick in it then clean it out with acetone when the cup is complete
@Karronslife
6 жыл бұрын
Do you have a shop or website I can order from you? I’ve seen many on Etsy, but none that do the mix of fine and chunky glitter as well as this.
@tiredmilky8416
6 жыл бұрын
She sells them on Facebook I believe not sure though
@Karronslife
6 жыл бұрын
Galaxy_playz 07 Do you know under what name? I searched vinos and vinyls on Facebook but couldn’t find her.
@tiredmilky8416
6 жыл бұрын
I know it’s not Venus and vinyls but I’m not sure the exact name.
Пікірлер: 191