Love this so much, I just wish it had a cut out on the top cheeseplate to make the hot shoe accessible for accessories, that way you get XLR sound in. This means removing the small rig top piece and making the Cineback adaptable.
@jeremysolterbeck6713
10 ай бұрын
There are other XLR inputs besides the Sony one jussayin
@georgegaza5319
10 ай бұрын
@@jeremysolterbeck6713 any recomendations of XLR options that might work with a build like this? Looking to buy this for my FX3 but would also still like access to XLR inputs.
@W1LL-K4NE
8 ай бұрын
@@georgegaza5319zoom f3. Incredible device
@thedopjan
10 ай бұрын
This looks great! One thing I would change is using the nato rail pins as locating pins so you can get the same alignment every time, and make the cage that much more solid on the camera. That or having the mounting screws fixed rather than adjustable, so that it's a little more rugged.
@jamesoreilley2557
11 ай бұрын
Hi Caleb, Just worked with the Sony FX3 Firmware 4 to discover a major change has occurred since FW 3. If a dummy battery adapter is used the FX3 monitor will display an error message. As I understand Sony did this deliberately as the Sony batteries intelligently communicate to the camera and will reduce the risk of a corrupted file should the battery die during recording. We decided to power the camera via the USB input instead.
@BrienBernardCreative
11 ай бұрын
Yes. I have the same issue currently. My Vmount power and dummy cable front Kondor blue give me the same message. They still work, I just can’t see the battery percentage or anything
@EricNentrupTheRed
11 ай бұрын
Stoked. Inspired. Impressed. Well done, CP. SO MUCH respect for your work, brain, ingenuity.
@JasonButler-u8f
11 ай бұрын
Cinema Footprint also a great way to look like a pro!
@ThomasWilliamson
11 ай бұрын
Love it but really wish there was a way to use the FX3 top handle. Now that I have XLR input I don't want to go back!
@poti732
11 ай бұрын
Super easy fix, get a cheese palte that is shorter and screw on 2 cheese bars from the bigger plate to the 2 top screwholes on the fx 3. You just use longer screws and put the cheese rods on top of the handle screwholes.
@MotivateBelieveAchieve
11 ай бұрын
@@poti732We need a video on this… lol.
@poti732
11 ай бұрын
@@MotivateBelieveAchievewell sincs i do not have this configuration i cannot show you but it is super easy you kinda make a U shape with 2 cheeserods And a shoerter plate And attach Rods to the the handle screws with longer screws.
@CarlBergsdorf
11 ай бұрын
@@poti732Is that ”safe” tho? From what I heard that handle is pretty plasticy and might not be made for all this extra weight, also depending on lens weight and some other factors, that might not be ideal placement for a handle right above the camera
@poti732
11 ай бұрын
@@CarlBergsdorf literally the same weight as the normal top cheese plate that you see in the video. If it can hold the cineback it can hold it with a different plate. Also iv used the handle and we had rod mounts, qr plates , vazen anamorphic ( which is very robust) and a smallrig V mount . it was holding it easily. Would grab it by the top handle ONLY . I was always using a side grip too but iv never had problems with that.
@sammymorales6838
11 ай бұрын
I would want one of this for the Blackmagic Cameras
@SkyeMauMau
11 ай бұрын
Caleb has a pretty dope rig setup for the bmpcc, it's just not as neat as this one. kzitem.info/news/bejne/uKOa35mgbn-LmZw
@marcfrederic1168
10 ай бұрын
A simple and effective way to intimidate and charge my clients more 😁😁😁😁
@Shauny_D
7 ай бұрын
If you can solder, I use xt60 connectors that fit in dtap ports but will allow you to solder on the cable at any angle you want. They are WAY cheaper too. That way all the cables can route cleanly. Just make sure you keep your + and - straight
@onetire
10 ай бұрын
Can’t wait to purchase this once more are in stock. Great looking design!
@lucasboyle959
10 ай бұрын
waiting to buy an R5C version. great job. how this was overlooked by the major companies for this long is beyond me. a rectangular prism housing is awesome.
@Petkow66
9 ай бұрын
This is the best rig for FX3/FX30!
@KristophTy
10 ай бұрын
So Basically.... • D-tap Male to 4 Port Female Splitter Power Cable (X1) - $19.99 • SmallRig Mini V Mount Battery Plate, V-Lock Mount Battery Plate (X1) - $22.90 • SmallRig Multi Functional Cheese Plate with 1/4 3/ (X2) - $44.92 • DaierTek Mini Rocker Switch 12V 20A T85 2 Pin SPST Small ON Off Switch 120V... (X1) - $7.99 And some sort of custom box to fit everything together... Am I close? Total = $94.00 Your product = $300.00
@MCplayer94
10 ай бұрын
He 3D prints the structure inside, and the cost must be made with the purpose also, I think the price is fair
@camerafoundry
10 ай бұрын
With our custom fitted parts and assembly yeah! Could totally DIY this own your own.
@LimboTubeSocket
10 ай бұрын
This is fine and everything. But basically no audio inputs since the 3.5mm jack is noisy etc. How I wish you could just have a cable from the hot shoe to xlr inputs.
@nicholas0730
10 ай бұрын
Wanna know if this works with tilta cage instead? I don't really want to buy another cage just to fit this 😅
@CartyCantDance
7 ай бұрын
Waiting for the lumix s5ii/X version! Wow what a clean design
@drummerboy81000
10 ай бұрын
This is an incredible product for its price point!
@KallusGarnet
11 ай бұрын
Big problem though. How do you get the camera out about using a screw. I love the idea. I just thinking needs to work.
@professionaI_yapper
10 ай бұрын
I wonder if we can use spacers and make it taller. Install an arca swiss quick release baseplate on top of the cheese plate. Since the fx3 cage is arca compatible. This rig is really cool but hard to remount to a gimbal etc.
@UmutYlmazGenc
11 ай бұрын
this is the best rig i've ever seen!
@alastairmckenziepro
11 ай бұрын
Bang up job here. I hope I get in with the 50. Any ideas to try and incorporate the xlr top handle? Maybe a gap like on the fs5/fs7 top plate
@emanuelfranca
9 ай бұрын
Hey Caleb! What’s up bro! I would really like you to do this for the Tilta cage, is that possible?
@BlakeCortright
11 ай бұрын
Been waiting for this! Christmas came early this year :D
@EmileModesitt
11 ай бұрын
So sexy, so clean. Would love to see a version of this that doesn't block the hot shoe mount so we could still use Sony's awesome mics (as well as the FX3/30 top handle with audio).
@WalterTheBalter
10 ай бұрын
Tally light on the back is covered too
@magnusedet438
10 ай бұрын
This is so great I so wish there's something like this for Sony A7SIII 😢
@Rumen.Aleksandrov
10 ай бұрын
Do you plan making one for the Fujifilm XH2s I will literlay hold on ring my camera to wait for it
@camerafoundry
10 ай бұрын
Would love to if we can keep up!
@user-uo6hl1il7h
11 ай бұрын
Great job man! Wonderful product for sure!!!
@smryt9728
10 ай бұрын
This is awesome! But there's no way this is worth $300. I hope the price gets more reasonable after these initial preorder batches
@TelevisionCrews
9 ай бұрын
I agree!
@blakeronan
8 ай бұрын
wait till you hold it in your hand .. its weighty and greaty ! just got mine and Ive made a mess already
@thomastwigg3535
11 ай бұрын
This is really nice work, but I'm not sure about the emphasis on Dtap. I've been using USB-C PD to power camera and monitor (and charging wireless audio receiver when needed) and it's working really well-and without the need for a potentially problematic dummy battery. As others have pointed out, optional use of the XLR top handle is also important to a lot of us.
@thenonadventure
8 ай бұрын
The website now includes a version with support for the XLR top handle.
@thesilversshot
8 ай бұрын
we need another batch asap 😢 i would pay double for this
@marcr4349
7 ай бұрын
no need to pay double. google rigidpro
@mick0matic
10 ай бұрын
This looks fantastic!! Question, why arent the D-tap connectors flipped upside down so the cables dont stick backwards? Also is it possible to download the STL seperately which was also possible with the CineDock SSD mount?
@camerafoundry
10 ай бұрын
If the cables face the camera they'd hit your hand :-(
@billmakesmovies
11 ай бұрын
Does this work with the V1 Tilta cage?
@ItsDrewsif
11 ай бұрын
This is ingenious
@luisadrianlara5561
11 ай бұрын
Truly genius
@BionicOutdoorsMan
7 ай бұрын
Very well done Video
@albe2002
2 ай бұрын
Hallo Dear, I've appreciated this video so much and now could you make another similar video about the GH5? Thank a lot
@DirectorAndyPalmer
11 ай бұрын
This is so freaking cool!
@Moriarty2007
11 ай бұрын
You are NOT Camera Foundry! You are DSLR Video Shooter! Why you made a new channel?
@alexandrepinto75
11 ай бұрын
this is fantastic. I dreamed of something like this. This body factor is so much better :D thank you ! Is there any possibly to use XLR Top handle?
@FollowTheJohn
8 ай бұрын
This is killer!
@Mall4567
10 ай бұрын
Excellent ! Thanks You
@MrAKirby
8 ай бұрын
When will you have some more in.
@brandongeisler5897
8 ай бұрын
When will the next shipment be? I want one of these bad boys.
@r.u.pickman
11 ай бұрын
I need something that can be used with S5IIX!
@Visual8Filmes
10 ай бұрын
Battery connected directly is crazy, if you disconnect it the file corrupts
@camerafoundry
10 ай бұрын
Could use a sony battery then go D-Tap to USB-C!
@IAmFitzee
9 ай бұрын
@@camerafoundry What D-Tap to USB-C cable could you use? I can't seem to find one that seems trustworthy
11 ай бұрын
Nice rig.
@ceasarstudioceasarbelliard7873
3 ай бұрын
Hello, can this be used with other cameras, keeping in mind the dimensions of the camera to fit? Thanks
@svadobnevideo
9 ай бұрын
The same is not made for the Panasonic GH6? well thank you
@smalltownsavouries
9 ай бұрын
The dtap scares me as you can easily hook it off something and possibly fry your FX3.
@ChrisloveKoko
5 ай бұрын
Is there gonna be a CineBack for the Lumix S5iix??😢 if so,when?
@JonnyDeeFilms
10 ай бұрын
I would love something like this for the a7s3
@lumixS5M2
6 ай бұрын
Thank you, to build for my camera, what top/bottom plate you are using?
@VisualFXPro
10 ай бұрын
Will you do one for the BMPCC 6K Pro? This would complete our rig!
@skyegiebink8723
7 ай бұрын
How much does the Cineback for FX3 with top handle weigh?
@camerondurbin7950
8 ай бұрын
Is there any hope for a Fuji Cineback? Would love a universal/shim-able cineback to use on Xt3/Xh1 and the shims would give you the height to adapt to any camera.
@johnsm5261
10 ай бұрын
can this set up be put to Gimbal Rs 3 and Rs3 Pro?
@SolisCreative
11 ай бұрын
FIRE
@alpoimsengo9447
6 ай бұрын
what about thw overheat
@ekarislens
10 ай бұрын
Can it fit on Sony ZV-E10? I love the setup ❤❤❤❤
@TheFoxtrotfenris
10 ай бұрын
Is there a Ninja v to dtap power?
@AndyLSB
11 ай бұрын
It looks fantastic, really does, I've been waiting for this one, but I have 2 questions 1) Could we disassemble the DTAP ports and rotate them so that the DTaps "base" cable doesn't bend like that ? 4:54 I'm afraid the cable life will be shortened by that bend. 2) sadly I bought the Tilta V2 cage for my FX30 since it came out, is there a way to know how much clearance there is on the CineBack to know if my cage will fit ? I really don't want to buy another cage for the cineback but I do really want it. thanks for this Caleb, again and again, coming out with fantastic stuff!
@camerafoundry
11 ай бұрын
Thanks Andy! The D-Taps aren't able to rotate but even if they did, the cable would then go right into your hand when holding the camera grip. I'll look into a way to have a cable clip or something to keep the cable from kinking too much but we've beat these up pretty good and have had no issues yet! Oh and as for the Tilta cage, we may make an adapter, but I can't make any promises.
@AndyLSB
11 ай бұрын
@@camerafoundry that would be fantastic really, to be able to use my tilta cage and have it as compact as with the smallrig (sort of), oh and about the Dtaps, what I meant by rotating it, having it on the same right side but "upside down" so the DTap connection still is on the right side but the cable going towards the camera body, protruding on top of the vanity plate, I feel that would be a "Solution" or no ?
@GlobalShutterNY
11 ай бұрын
2nd vote for the Title cage compatibility!!
@thenonadventure
8 ай бұрын
@@camerafoundry When it comes to the FX3/FX30, I really like the Tilta cage and accessories more than Smallrig's offering. I will gladly wait for an adapter so I will keep my finger's crossed.
@khaoz529k
10 ай бұрын
I love the design! Would this fit the smallrig 3277? If not, will there be an option or an alternative for it at some point?
@Lunar_Films
2 ай бұрын
You get the battery with this??
@JabDFilms
6 ай бұрын
i need a s5iix version
@florentthomas5300
10 ай бұрын
I"m down if there is models for older cam like A6400 series or A7iii
@davidnoguier8181
11 ай бұрын
If you dont want to use a dummy battery can we just use some adapter DTAP to USB-C to power the Sony Battery? Or you wouldnt recommend that?
@RickValasek
10 ай бұрын
How much does the final rig (that you show in the video) weigh? I can mount up to 10lbs. on my DJI RS 3 Pro.
@heyheyhey520
9 ай бұрын
What would the correct mic back be for the Deity Theos? Really want to mount it with my D3 pro
@crank_FPV
10 ай бұрын
Sold out 😩
@AronBagel
11 ай бұрын
Is the Cineback compatible with the Kondor Blue FX3(0) cage as well?
@brandongeisler5897
7 ай бұрын
When will the cineback be back in stock?
@marcr4349
7 ай бұрын
google rigidpro always in stock and just as good if not better
@JuvenalMaze
10 ай бұрын
does this work with a falcam rig setup?
@amigosfilm87
6 ай бұрын
does it also fit with zve1?
@marcr4349
5 ай бұрын
rigidpro has a zve1 model available
@samiedave9965
11 ай бұрын
Is it possible to use this with an A7SIII as well?
@alanandrews7403
11 ай бұрын
I have the small rig half cage for the FX3 (With the 15mm rod hole atop) will this cage work? it seems really similar to the one pictured in the video.
@takuyajimbo
10 ай бұрын
it's great but is there any option for the audio handle?
@heavenlypictures4200
8 ай бұрын
it covers that whole area up sadly.
@marcr4349
8 ай бұрын
google rigid pro for a top handle version
@Stealthbich
11 ай бұрын
this is fucking amazing! can we get one for the lumix s5ii x in gold mount?!
@Emiliano-Oseguera
11 ай бұрын
Do you ship to Mexico?
@jujufactory
10 ай бұрын
Get the FX6 instead.
@SeanHarrison
8 ай бұрын
I would buy this in a heart beat but I can't :(
@marcr4349
8 ай бұрын
rigid pro has a version in stock
@SeanHarrison
8 ай бұрын
You're actually a legend, ty sm I just bought one!!@@marcr4349
@WalterTheBalter
10 ай бұрын
Sony is gonna copy this and make it better unfortunately and charge a grip
@STGFilmmakers
2 ай бұрын
Um guys. why not just buy a camera that already has this form factor? lol. I'm just confused why spend $400 on a kit that turns a camera into a wanna-be form factor of an FX6/Komodo/FS5/FS7 ect. Just get an FS5/7 lol. If you can't create a good film with an FS7, buying an FX3 and turning it into an FS5 form factor isn't going to magically fix that. Not to mention the whole purpose of the box form factor is the easy access movie settings, shutter/PP/peaking/zebras/WFM/ISO/Variable ND all on the fly, quick access. This kit does NONE of that. Still No NDs, nor does it magically add 10-12 movie specific buttons on the side like you would find on a box style proper cinema camera.
@alexhunter5356
2 ай бұрын
Is dope but always out of stocks bleh
@darkspace165
10 ай бұрын
Why are stealing dslrvideoshooter channel videos?????????????????
@camerafoundry
10 ай бұрын
I'm not because I'm Caleb Pike! This is my second channel for another company I started (Camera Foundry).
@darkspace165
10 ай бұрын
@@camerafoundry ohhh hahaha .. i thought someone else using your videos and i felt bad about it... Actually i have been watching your video for years and i respect the way you share information... Good to know that this is your second channel and feeling very good to talking to you Caleb
@nanopixel.studio
28 күн бұрын
Just got the FX30 Gold mount cineback in this week. I noticed that there is a D tap on the side of the battery plate, can I charge from there?
@Moriarty2007
11 ай бұрын
It's ok, but I wanna use original top handle. And Type-C cable for power is better for powering this camera, because in power loss case if you use dummy battery you can loose your last shot!
@antone9751
10 ай бұрын
You can buy a Dtap to USBC cable.
@ejays99
10 ай бұрын
I love this concept, I just wish it could still incorporate the XLR top handle. This setup is only good when you have an external audio shoot.
@thenonadventure
8 ай бұрын
Their is now a version with XLR top handle support.
@ejays99
8 ай бұрын
@@thenonadventure checked the website, not seeing it
@timdanyo898
11 ай бұрын
The deal breaker is rendering the incredible 4 audio input top handle useless. Please make a top plate modification that would allow the data hot shoe to be accesible!
@nowkirkwon
10 ай бұрын
Is there any way to add the top handle on it ?
@timdanyo898
10 ай бұрын
@@nowkirkwon I don’t think so. The hot shoe is completely blocked off.
@nowkirkwon
10 ай бұрын
@@timdanyo898 I asked for a refund. Without the top handle, there is no point.
@camerafoundry
10 ай бұрын
We are working on an accessory that works with the handle!
@invisibleadversary
5 ай бұрын
This would be perfect if you didn't have to gut the battery slot and implement a dummy battery. Also, as nice as this is, I go and back and forth on the actual utility of it. At this point you might as well just get an FX6 with internal NDs but then again you can strip this down and have a smaller more low-profile camera so essentially the best of both worlds.
@madsmix
11 ай бұрын
Love this! If I can think of an improvement it would just one thing... replacing the power switch with a LED backlitlit switch with a flip cover (to avoid any accidental depress).
@daltonbrowne7980
11 ай бұрын
Pretty confused by this product to be honest. The point of an FX3/30 is to be small, so why would you want to add so much size when you could use preexisting hardware that would save on space. Not to mention in this configuration you lose the option to use the Sony audio top handle.
@jamesoreilley2557
11 ай бұрын
You are missing the point behind a camera cage. It is a necessary accessory to mount additional gear and battery to make the camera more functional. In the future Caleb may release another version with a cut out on the top cheese plate to allow mounting the Sony audio top handle.
@daltonbrowne7980
11 ай бұрын
@@jamesoreilley2557 I have a camera cage on my FX3 rigged out. I’m saying that this adds a ton of extra size when you could just use rails, a vmount plate, and a dtap splitter.
@Satysatonachair
11 ай бұрын
It just looks cool ok? 😂
@MCplayer94
10 ай бұрын
And why not get this instead of doing the rig you mentioned?
@daltonbrowne7980
10 ай бұрын
@@MCplayer94 like I said before, this adds unnecessary size the other rig build would not.
@robertfontaine3650
8 ай бұрын
DTap cable connecter points in the wrong direction but nice little rig.
@matthewdebono862
11 ай бұрын
The concept is interesting, but for it to be truly "Cine" theres a few things you need to re-think about the product. Firsly you need more varied power outputs, such as 2pin lemo and 3pin Fischer. Secondly, you need more 3/8" threads than 1/4 20s, and they need to have Arri locating pins. This includes 3/8 threads on the side of the plate, so it's going to need to be taller. For the Base plate system, you need to think how it's going to line up with industry standard rod heights, and what plates match up to yours to take the camera to 15mm LWS height (going to studio height is easy once there). A Camera base plate isn't about just cheese plating the bottom. It would also be great if the batter plate is easily user swappable between V and Gold mounts (maybe it is already, if you could clarify that?) Lastly, and this is more of a bonus really, it would be really great if you could have an HDMI to SDI converter/splitter integrated into the back, and have SDI 2-4 SDI outputs coming out adjacent to your power outputs. Like I siad I find the concept for this very interesting. Your method of protecting the screen is great, and it's also great how you built the camera backwards, keeping it short and the center of mass low, and helping to offset the weight of the lenses and anything else you put on them. Your built in cable management space is also really neat and handy :)
@pixel1080
9 ай бұрын
Have you considered flipping the 4-Dtap the other way? This would prevent binding on the single Dtap.
@pixel1080
9 ай бұрын
Or maybe another dedicated Dtap inside more, since power is required… away from your hand placement.
@justjean9500
8 ай бұрын
Any updates on when these will be back in stock? I don't want to miss the next order window.
@conner_productions
8 ай бұрын
a company called rigid pro created virtually the same thing. If you don't wanna wait for cineback, they have theirs in stock.
@justjean9500
8 ай бұрын
@@conner_productions thanks! I’m going to check them out now.
@WalterTheBalter
10 ай бұрын
My smallhd 502B isnt turning on with the switch via dtap to dummy
@924PHOTOGRAPHY
11 ай бұрын
Just purchased mine for December delivery! Great job
@JusssMee
3 ай бұрын
Hey I have been trying to purchase the cineback for my fx30 for the past two weeks and have been up at 6am eastern but the ordering page is never changes from out of stock. Is there a certain way I have to order it or from a specific place? It's 7:05am est which is 11am GMT -4 when the status page states it would be available.
@taylorrowson3961
10 ай бұрын
I already saw some comments about the issues with dummy batteries, 2 pin lemo and 3 pin fisher, sdi, battery plates, baseplate compatibility and such. I think the genius part of this rig is the screen holder. As well as the fixes I listed above, an option for a usb-c pd on the left side to plug into camera would be smart, maybe usb-c on the right side as well for prosumer gear that takes that. If it were possible to have user swappable power ports I think that would be amazing! Choose between lemo, dtap, and usb…etc. Also, a way to use “pass through power” like you see on cages for Alexa and red, where you can use XLR or other ports to power the cage without a battery. Useful for gimbal work and more. Other steps beyond that would be taking a page out of Tilta’s book with the CFE to SSD adapter that allows installation of NVME SSDs or USBC SSDs to use as media (and an included space in the rig to “click” it into). There’s a product by a company called Zitay that is a SSD enclosure to a dummy CFE-A card, something like that incorporated into a FX3 cage could work if incorporated in a good way
@camerafoundry
10 ай бұрын
All great suggestions thanks Taylor!
@hemlockmediacompany9927
6 ай бұрын
It's great that such a product exists, thanks for making it, however it seems impossible to get one which sucks... Ill try on march 20th to get my hands on one but if that doesn't work I am going to have to move on...
Пікірлер: 205