Sorry the audio is a little all over the place in this one! 😅 How are you guys holding up out there? Crazy stressed, crazy bored, or both?
@colorplease9570
4 жыл бұрын
wermy waiting for this video to come out
@cwriley80
4 жыл бұрын
Both. Still waiting for Helder to make more PCB boards.
@mortimermouse3086
4 жыл бұрын
Both for sure. My highschool decided that they are going to give us even more work.
@Angryhelder
4 жыл бұрын
@@cwriley80 They got shipped today so will have them next week.
@cwriley80
4 жыл бұрын
@@Angryhelder thanks for the quick response. I'll be ready for it.
@briangoldberg4439
4 жыл бұрын
Hey Wermy, good to see you out and about. I appreciate you acknowledging the current situation; a lot of youtubers are just continuing like nothing is happening and it feels weird.
@Terra_Beast
4 жыл бұрын
Love your work so much, you inspire me a lot and hope that i will make my own project in the next months
@Guitarsoulmadness
4 жыл бұрын
Wow, my favorite built to the date. And is so pleasant to see the way you work and explain the process in the video. Hope I can get one of these someday...
@just.tiramisu
4 жыл бұрын
I love these projects so much!
@camatt2989
4 жыл бұрын
I so appreciate everything you do wermy! Thank you!
@FranktheTank319
4 жыл бұрын
Good on you for helping out the community. I respect that.
@ahmedp800
4 жыл бұрын
Man I am a sucker when it comes for these retro handhelds! I ordered 2 just recently, the RG350 and Retroid Pocket. Can't WAIT to get my hands on them
@geegigaga3370
4 жыл бұрын
Nice collection of handhelds in the back ground. First time to your channel and subscribed.
@imm311
4 жыл бұрын
Hope you and your family are well God bless!
@lotion5238
4 жыл бұрын
ive always wanted to do this but could never figure out where to start. I love your creations, even though I haven't tried to make any yet.
@smartacus88
4 жыл бұрын
I have recently really gotten into retro gaming and consoles. I bought a Sega Genesis Mini. Ordered two of the licensed 6 button controllers. I'm not very keen on doing in depth mods with a PC, so I'ma send it to a pro modder when I get paid again to have the system overclocked and get most Genesis games on a USB. My father in law noticed my enthusiasm and gave me an original SNES console with two controllers and 23 games! I need to get component cables for it though. After I finish my Genesis and SNES projects I wanna do something with a Gameboy or Game Gear. Glad there are channels like this that fuel my new hobby and teach me things I would've never known otherwise. Thank you.
@JK-xz1lt
4 жыл бұрын
Damn! That's an awesome build. 😎
@graypetcoyle
4 жыл бұрын
I think it’s really cool that you’re using your resources to make face shields
@Xoferif
4 жыл бұрын
Great T-shirt! Took me a second to place those graphics... =)
@hivetyrant7
4 жыл бұрын
Any concerns about cooling? The compute module can get hot!
@Luis_Piferrer
4 жыл бұрын
This is not for an exhaust play.
@anothervoyager9654
4 жыл бұрын
Even worse considering you are putting a battery just on top the compute module, so not only the cm is getting hot, but the battery aswell, not a good combination. To be fair, there's not a lot of room on a gameboy pocket and the DDR2 socket is a little bit high too...
@kidpisot
3 жыл бұрын
Not to mention that the battery is on top of the Compute Module.
@cabrinius
4 жыл бұрын
in the future we're gonna be playing BotW and SMO on things this small.
@planty6934
4 жыл бұрын
Ovona Ovano yeah that could take a while
@theguywhoasked3435
4 жыл бұрын
@@planty6934 oh come on you can play doom on a calculator and John Carmack thought you couldn't play doom on a amiga
@daPabOu
4 жыл бұрын
You already do play it natively on the switch. Apart from the screen, it's not that much bigger... The same components go inside smartphones. What's difficult is emulation which requires a whole lot more cpu/gpu performance than native.
@StormBurnX
4 жыл бұрын
@@planty6934 The GPD line of devices can do this and it's crazy awesome :)
@LeisurelyLion
4 жыл бұрын
The future is now old man, switch lite is not much bigger my dude. Only 200 bucks.
@akhurash
4 жыл бұрын
Awesome build.
@disruptityourself
4 жыл бұрын
I think I'm ready for this.
@rivera82falcon
4 жыл бұрын
Love seeing these videos!!! I get that it's very easy to get into a funk and lose motivation to do what we love so much. I'm printing up some shields and straps like many others so that is a great start to helping fix a bigger problem. If doing nothing else helps you right now, do nothing at all!!! I've been seeing a lot of my subscribed youtuber's pushing out more content than usual and it's personally annoying. You do what you feel is right for you and your family so don't worry about what we feel. I liked this a lot! Any chance someone has a link to a Game Boy shell that we can print to make these projects? Any other good projects to print up you'd recommend?
@maxlydon1
4 жыл бұрын
Great video man!
@eyeball8359
4 жыл бұрын
I am really excited for that cartridge macro pad
@enjaderletsplayer2259
4 жыл бұрын
Das nenne ich auf jeden Fall mal einen richtig guten Emulator Gameboy pocket
@electronic7979
4 жыл бұрын
Excellent
@jchambon
4 жыл бұрын
Yes! He has uploaded
@dende2401
3 жыл бұрын
Nice and easy with all those 3D printed parts :)
@dirtybeagles1502
4 жыл бұрын
great video wermy! love the details of your video. most of the parts are no available btw, probably due to the issues.
@billybob7502
4 жыл бұрын
great video! love to see the joystick being added. I'm thinking of making my own build. what is the ideal button layout of emulation up n64? I have seen builds like this with back buttons and 6 actions buttons and a joystick. is that necessary ?
@joshuarmost
4 жыл бұрын
I love the videos!
@ComputersAndRetro
4 жыл бұрын
Waooo, excelent video, beautifull work.
@charliewahl2626
4 жыл бұрын
Thanks
@tromboneguy_0447
4 жыл бұрын
I’m looking into doing a similar build for the circuit shield and really like the Nintendo switch thumb-stick on the psp analog stick and was wondering how you did that.
@andrewwhitfield5480
4 жыл бұрын
I noticed you've lost weight. You doing okay? Stay safe and thanks for all your hard work.
@wermy
4 жыл бұрын
That was actually intentional, been working on that since the new year. :) I appreciate the concern!
@N3tech
4 жыл бұрын
It would be really cool if there was a pre-modified STL of the shell so a custom shell could just be printed on a resin printer.
@stephentrenta3514
3 жыл бұрын
Agree 100%
@benjaminrobinson251
2 жыл бұрын
I’m working on one for the Gaboze Pocaio.
@benjaminc5757
4 жыл бұрын
Congrats, its awesome! Do you plan to do the same but with a gameboy advance sp case ? Would be great. Have a nice day
@piplup10203854
4 жыл бұрын
Ooooh, I want one :D
@N1CH0LAS12
3 жыл бұрын
I can’t wait till they make one for the CM4
@amogusamogus4997
4 жыл бұрын
Since the board has wifi built in, it maybe possible to play pc games via steam link. Imagine playing Minecraft or Stardew Valley on a gameboy.
@KellyVanHalen
4 жыл бұрын
Still haven’t put my circuit sword together! I know the process is MUCH easier than the spare parts zero I built off of your first videos, but the first step is the hardest! Lol
@jrok96
4 жыл бұрын
@KellyVanHalen Your just the person i want to talk to. Any way you could provide us with a approx price breakdown for this project? A few of us would greatly appreciate it!!
@millski
3 жыл бұрын
Great video wermy. What tact switches and caps are you using? I can’t find any good silicon capped switches that are small enough 😒
@ShadowBurn680
4 жыл бұрын
Im looking forward to this gameboy cartridge numpad/macro pad
@cljoe35
4 жыл бұрын
1:37 Cmon TARS. Had an interstellar movie moment there
@bobbyhinner3225
4 жыл бұрын
Ds also runs well on the pi 3! Setting up drastic is kinda a pain but once you get it it is really nice
@dmace81
4 жыл бұрын
Good luck playing games that need touch screen though.
@PWscreens
4 жыл бұрын
My gb boy colour broke perfect!
@bridgetnafula386
3 жыл бұрын
cool
@chefal09
4 жыл бұрын
awesome work really like watching your projects im waiting on electronics for the mintypi build. how big is your co2 laser cutter??
@stephentrenta3514
3 жыл бұрын
Pretty sure it’s a glowforge laser, so it would have a 20” x 12” work area
@twelfthman5155
4 жыл бұрын
Really wish I found this vid sooner :(
@davidtovar732
3 жыл бұрын
Hey Wermy! Are there any configurations you have to make to run the CM3+? I put one in my Circuit Shield and it doesn’t boot.. I assumed Kite’s github file for the shield would work, however it doesn’t. Any ideas?
@ellaquin
4 жыл бұрын
Pokemon Circuit Sword, and Pokemon Circuit Shield
@pierre1688
4 жыл бұрын
Can we get a nice finished case that already has the cutouts? Maybe a 3D printed case?
@onedeadsaint
4 жыл бұрын
so what's the total cost for this project? I've seen some videos that tell you, but not enough of them do this. thanks for the content!
@sterkriger2572
4 жыл бұрын
onedeadsaint it’s probably cheaper to buy a retroflag GPI case
@Vintiqueture
4 жыл бұрын
@@sterkriger2572 and be stuck with a pi zero? Ew
@jrok96
4 жыл бұрын
@@Vintiqueture yeah we need a price breakdown please!
@MegaRetroRocket
3 жыл бұрын
@@jrok96 All in, it'll come out just under $200 depending on shipping to your country and where you get your shell, buttons etc. If you get wermy's 3D printed parts and Bluish Squirrel's glass lens, that'll add another $30-40
@mandoloops5883
4 жыл бұрын
I've been following you creations since i came across the minty pi. Whenever parts came out i was never able to get any. Any news on the minty pi part orders?
@waveformdistortion
4 жыл бұрын
I think you'd be far better off using a safe edge file in some of the places where you used a craft knife here, particularly in cutting the slot for the HDMI port.
@Shad0wX
4 жыл бұрын
1:29 eyyy 😎
@nickpavloff8977
4 жыл бұрын
Compute module 3 comes up as some sort of body control module for a BMW when I search for it lol
@stephentrenta3514
3 жыл бұрын
Probably cuz you need to include “raspberry pi” in the search query LOL
@artstrutzenberg7197
4 жыл бұрын
Love you ork....out of curiosity, would there be a thingiverse model of the shell with all of the necessary mods?
@SuperCommands0430
4 жыл бұрын
Wermy, when you and Helder release the MintyPi Lite will you keep selling the MintyPi v3 parts? I ask because I like some of the features included with the V3 Parts. Please respond if you can
@charlieg3412
3 жыл бұрын
i cant believe i missed the pre-orders...
@matthewdeane235
4 жыл бұрын
Could you do a video on your game systems/game collections?
@102kennyworld
4 жыл бұрын
Cooooooool
@oliviers5811
4 жыл бұрын
Honnestly how many people are gonna do that lol You better make a lot and sell them, I would buy you one for sure
@stephentrenta3514
3 жыл бұрын
Plenty of people! There’s a decently large modding and DIY community when it comes to Gameboy stuff. If you’re looking for a prebuilt option, there’s already plenty of Gameboy emulator hardware available to buy, for much less than this. This specific option was intentionally designed for the DIY community so people could build a fully custom one.
@cylo5770
4 жыл бұрын
@wermy how does CM3+ impact the performance boost vs cm3?
@maximemalet4728
Жыл бұрын
Hey, is there still a way to get my hands on Kite's circuit board ? The last order seems to date back to 2021
@RustyFerrari
2 жыл бұрын
Can you link to the tactile switches you were using please? Did not see mention of them on the parts and stuff link page
@buckaroobanzai3073
4 жыл бұрын
Me gusta 😊👍
@ugurylmaz7666
4 жыл бұрын
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@AlexDenton0451
4 жыл бұрын
Man I wanna do a project like this but I just don’t have the money or skill in soldering to do it. I can get wires sure, but tiny pads are hell for me to get right.
@Sillyzombie666
4 жыл бұрын
any good model 4 pi gameboy projects? i have a 3 and a 4 sitting around and would rather have a handheld
@therealmakmillion
2 жыл бұрын
What kind of resin are you using for the buttons and joystick cap?
@themysteriousjames6756
4 жыл бұрын
I think you should do a tutorial on running Android on switch and installing ROMs on it. A lot of us already own a switch and want to make a handheld emulator but don’t have the time or money to do it.
@anaselectronics62
4 жыл бұрын
Amazing video app ki #anrepairinglabs
@lian7092
4 жыл бұрын
nice XD
@joshuarmost
4 жыл бұрын
I know you probably are not sure about this but when do you think helders parts will be available for the minty 3?
@Angryhelder
4 жыл бұрын
next week
@joshuarmost
4 жыл бұрын
Helder Silva Cool! Thanks
@dokols
4 жыл бұрын
Waiting for compute module 4.
@ModusHopper
4 жыл бұрын
Where did you get that shirt, bruh??? I need it.
@t.j.maxxxrazor5935
4 жыл бұрын
what is the program being used at 5:19? Is it free and is that what is use to build those amazing models?
@laryeyre5563
4 жыл бұрын
Its AutoCAD Fusion 360, you can get a personal use license for free.
@bigemugamer
4 жыл бұрын
Interesting! this board could be configured to have an ABC, XYZ for 6 button genesis and arcade gameplay, also 4 direction buttons, an A & B button and analogue for N64 gameplay, but no shoulder buttons eh? ... why does every handheld these days have to have seemingly everything yet omits (at least) one random feature that just breaks it for me?? =/ Edit: ohhh, it does have L and R buttons..... still missing second analogue, still though, pretty awesome game boy! =D
@somewonderfulguy
4 жыл бұрын
It seems to hard to make it by your one. At least for me. Why is it not selling as ready product? I would buy it!
@stephentrenta3514
3 жыл бұрын
It’s not that difficult, just time consuming and requires some tools. There is already plenty of ready made Gameboy emulator hardware if you want a prebuilt. This specific option was intentionally designed for the DIY community so people could build a fully custom one.
@2Razor7
2 жыл бұрын
I been looking for a modded Gameboy pocket. Do you sell them already assemble?
@admunt1577
4 жыл бұрын
I think it's a very good idea but Raspberry Zero is a weak solution. While emulating games even on Raspberry Pi 3, I noticed problems with game dynamics such as stuttering frames, music, etc.
@davidmcenery9134
Жыл бұрын
Hi. What t shirt are you wearing. Cheers from UK.
@peterapaza2167
3 жыл бұрын
cual es el sistema operativo que le pones?
@AB-mo4pg
4 жыл бұрын
Hey does anyone have any tips on starting to mod or make portables?
@deadfranko5345
4 жыл бұрын
Does anybody have any recommendations for DIY portable pi handhelds?
@sascha4925
3 жыл бұрын
Can u use any Game Boy Color shell? For this Projekt ?
@arnavpunnupu5812
4 жыл бұрын
Does anyone know where someone can gat a tiny pi pro
@kruemmelbande5078
4 жыл бұрын
Id love Something Like this with the Pi 4. I know that the battery life would not be great, but... Ps with double Resolution. N64 with good Performance, besides some issues loading stuff in.... Even ps 2 emulation if you overclock it!
@kran27_
4 жыл бұрын
It's not using a pi 4 because it's a compute module...
@oatmeal.3277
Жыл бұрын
Good! Now just make it work with arm tiny 11and its a full gaming console
@maglev_
4 жыл бұрын
I could never do something like this
@stephentrenta3514
3 жыл бұрын
Not with that attitude! Lol
@WustafaS
3 жыл бұрын
can u make a advance sp of this it would be sooo cool pls
@altoidstincan8166
4 жыл бұрын
5:55 Is that an Odroid Go I see?
@wermy
4 жыл бұрын
😬
@altoidstincan8166
4 жыл бұрын
Uh, since that emoji is kind of confusing to understand, could you please clarify what you mean by "😬"?
@wermy
4 жыл бұрын
It is. I got it just for fun but still haven’t assembled it yet, so might do a quick video with some thoughts. :)
@superretrolandofficial9109
3 жыл бұрын
Hi where can I buy everything for this?
@BassWaves88
4 жыл бұрын
i want 1 so bad but so scared to even try to start 1 and mess up.
@itsgood3019
4 жыл бұрын
Is there a way to make a DS with a rpi zero?
@jakeyam0223
4 жыл бұрын
can I buy some of your work?
@chrisropherboulay
4 жыл бұрын
I want one were do I get one🤔
@giuseppech
2 жыл бұрын
I'm looking for stl files for this project. Nothing on patreon and wermy don't message me back on patreon. Anyone have a link to download this?
@thegrandpoobah7114
4 жыл бұрын
Anyway you would do.one for commission?
@ghettospacefsh6251
4 жыл бұрын
Could it run games from the psp?
@OllieLK
3 жыл бұрын
Can't believe he sacrifices a Gameboy cartridge 😭😭
Пікірлер: 198