Great video. I have a 2015 Citroen C3. 80 000 on the clock. Just booked mine in for this exact job. Done well to have it last that long! The car started to burn oil, which alerted me to the problem.
@barimagas
Жыл бұрын
Ι have a citroen c3 1,2 82 12/2017. 90000 km the half with lpg gas, still no problem. I changed oil sooner. Every 10-12k km. Burn one liter oil every time.
@alz283
21 күн бұрын
How much would it cost roughly just for the oil pump to be done as I’ve already had the belt done and they said the gauze for the pump was already clean, someone already messed with it before I owned it.
@lennonpolo
2 жыл бұрын
Excellent video! Will you be able to change my belt in my Peugeot 108 if I supply it? How much would it cost?
@Chris_CDB
2 жыл бұрын
Hi mate, do you have the same engine as this fitted?.. This one cost nearly 2k to do the job, however I did a clutch on it and service at the same time. I would to be honest want to supply the parts as I cannot warrant parts I do not supply, irregardless of where they are bought from.
@Dele7er1
2 жыл бұрын
Exactly the same happened to my 2019 c3 back in November, 38k miles so pretty much the same mileage . Same error messages same issue with car having to stop immediately and throwing all errors. Took to citroen and they said it was an issue with belts and that they had changed them since but makes me not really trust the car even if mine has been fixed.
@Chris_CDB
2 жыл бұрын
Yea it’s difficult to imagine it not repeating the fault!
@yungsunchan9906
Жыл бұрын
Thanks your share! My C3 PICASSO is same, Can you tell me how much you pay to fixed?
@sandyande
2 жыл бұрын
Great video cheers sandy
@Chris_CDB
2 жыл бұрын
No problem!
@scotspie501douglas7
Жыл бұрын
did you change the vacuum pump have you seen the sevice bulletin
@oscariglesiascea3111
2 жыл бұрын
Tengo un motor puretech 60.000 km y todo muy bien eso si el mantenimiento al dia
@xkais487
Жыл бұрын
de que año es?
@oscariglesiascea3111
Жыл бұрын
@@xkais487 2021 abril
@pablo123b
Жыл бұрын
great job and filming was spot on...where are you based mate?
@Chris_CDB
Жыл бұрын
Based in north Kent (sheerness)
@NikolaEON
Жыл бұрын
What is the current situation with the new Citroen C4 PureTech 1.2 100HP engine regarding known issues in the past, are they better now? I really appreciate any help you can provide.
@k98k007
Жыл бұрын
Did you bought the car?
@Berniessen
Жыл бұрын
Soglad i have a old pushrod v8 with hydralic lifters and a external oilpump and a very short double row timing chain that last the life of the engine.....What i spend more on fuel i save on repair bills...
@markleggett3944
4 ай бұрын
Technology isn't all it's cracked up to be.
@Chris_CDB
4 ай бұрын
That is true
@thomas5607
Жыл бұрын
Hello, I’m just wondering how to time one of these back up after having the head off because the timing belt got shredded and lost timing and I’ve never timed an engine up before with variable timing
@Chris_CDB
Жыл бұрын
You will need the engine timing kit to lock the head / cams and bottom end
@qtechgr
Жыл бұрын
Why to change the oil pump? If you clean the filter is not ok? it was damaged ?
@Chris_CDB
Жыл бұрын
Hi mate, oil pump was changed due to the pump would of been running basically dry due to the pickup being blocked, I didn’t (and nor did the customer) want to as the chance of it having premature failure.!
@Katakana01
2 жыл бұрын
I just had the same problem on my c4 cactus 2015. Timing belt was rotten and had to replace the oilpump and oil pressure sensor. After 7 years and 55k Kilometer.
@yungsunchan9906
Жыл бұрын
Thanks your share! My C3 PICASSO is same, Can you tell me how much you pay to fixed?
@Chris_CDB
Жыл бұрын
It will be a high price due to the labour involved in fixing it properly.
@Katakana01
Жыл бұрын
@@yungsunchan9906 had to do two cleaning runs on the engine with fresh oil. Timing belt got changes obviosly, the "flatbelt" (dont know the english Word for it), also new oil pump. Cleaned out one magnetvalve and changed to other, changed to oil sensor since it was clogged. Overall around 2000€. About 5000km later had ro change crankshaft sensor but no idea if thats connected. Also the engine uses a less viscid oil now since thats needed for the new timing belt.
@pappiricki
Жыл бұрын
55000 kilometers in seven years is the main problem. Many short distance and cold starts ruins the belt more.
@vincemarshall8550
6 ай бұрын
that system looks a proper retrograde step ,apparently 30% less friction but only 1% fuel efficiency improvement ....gimme the friction anyday ,thanks for the film
@Chris_CDB
6 ай бұрын
No problem,
@samirkadiroglu174
2 жыл бұрын
Faced same problem wiht my 2015 citroen c elysee 1.2 vti in 96 km.pump cleaned and problem solved. But not changed timing Belt. Do you think need to be changed?
@1968Gena
2 жыл бұрын
На пежо 2008 2014г,я поменял на 140т, в поддон не заглядывал, открыл на 180т,мусор был но не критично.
@grapsorz
Жыл бұрын
YES!
@mph122
2 жыл бұрын
Without warranty, how much did it cost for replace oil pump and timing belt like you did above? Does changing oil to PSA specs regularly help mitigate the issue? I change engine oil for 2018 plate every 3-5k and visually check the timing belt via oil cap place.
@Chris_CDB
2 жыл бұрын
I think from memory it was around 2k for the job. However we did a clutch kit and a few other bits to the car while it was all in bits so it may be a bit cheaper, it really just depends on the place you take it, some will be 40 an hour, some can be 80.. ! Oil in theory you want to keep to spec, however any oil is going to degrade a rubber belt over time. Inspection of the belt through the hole is all well and good however you cannot see the front toothed side of the belt, so makes it difficult to see what’s going on. Best way is probably to remove the sump and take a look at the pickup tube for the oil pump.
@johnnyslow4887
Жыл бұрын
I'm paying £450 to replace mine.
@vista2019
5 ай бұрын
@@johnnyslow4887can I ask which county you are in?
@Chris_CDB
5 ай бұрын
Uk.
@Chris_CDB
5 ай бұрын
Uk, England.
@SuzanneHalligan-bq1hw
Жыл бұрын
I have a 66 plate C3 with a 1.2 pure tech engine. I am losing half a tank of oil a week. Oil is being pushed out via oil cap but I have replaced oil cap. Could back pressure be caused by a similar issue to what you are highlighting? The oil pump was changed about 3 years ago under warranty?
@Chris_CDB
Жыл бұрын
Hi there, it sounds like you have high crank case pressure, possibly caused by a worn out engine, if you have oil being forced out oh the cap it must be under some serious pressure. Or potentially a breather isn’t connected properly. Without looking at the vehicle it is difficult to diagnose over message! 🤦🏼♂️
@frederiko1982
Жыл бұрын
@@Chris_CDB can you show us the breather part. Im diagnosing my wifes car and i found a very strange air puff if i remove the dipstick or the oil cap. Im familiar with breathers messing up on e46 and braking turbos but in this case does it use some membrane or just a simple pipe?
@ItsGosho
Жыл бұрын
Does the new timining belts have that problem, which they put in the new 2022 Puretech engines?
@Chris_CDB
Жыл бұрын
I know that when you buy the replacement belts they are of different materials so they are “supposed” to not break up, I am not sure if they fit the updated belts to the new engines or have stuck with the old type.
@amac1657
8 ай бұрын
I’ve got a 70 plate with exact same issue
@xkais487
Жыл бұрын
Do 2022- 2023 puretech 1.2 130cv engines still have this problem?
@profemeritus534
10 ай бұрын
No - in fact the newest variant doesn't even have timing belt anymore, but a chain. Go for the 136 hp rated engine instead of the 130 hp.
@johnts2252
6 ай бұрын
@profermeritus, As I know officially Peugeot never didn't say that. If that happened could you send me a link about that?
@pedrob2817
2 жыл бұрын
Hola cuántos años tiene el coche y km .gracias
@georgeclarke1183
2 жыл бұрын
I am thinking of purchasing this model citroen whats the actual mileage of this failed oil pump and the timeing belt please
@markleggett3944
4 ай бұрын
I believe he said the vehicle had 40K miles on it.
@nmkbanzee4787
4 ай бұрын
Hello, I drive a citroen ds3 with this problem. After replacing the oil pump, belt kit etc. It still consumes all the available oil after about 1000km. Anyone who has experienced this? I would greatly appreciate some advise🙏😭
@Chris_CDB
4 ай бұрын
These engines unfortunately wear prematurely and do consume oil as they do.
@philiploud7011
Жыл бұрын
my wifes car has been sitting on my parents drive for 4 weeks now due to this problem, its a ds3 puretech 1.2 engine on a 2016 plate with 73k miles, it sounds like a ww2 tank, we are gutted we cant use it cos we are still bloody paying for it, rang ds company which is a seperate company to citreon since 2013, and he told me they are repairing the problem as they know about it but they have stopped investigation work for a few months now, so cant even use it till they start up again, im thinking of just getting someone out to have a look and see if they can just clean up the oil strainer on the oil pump for now so we can use the car till ds company books it in, but in all honesty we dont know what else to do as we certainly havent got £2k to spend on it thats for sure, any help with this matter would be greatfully received cdb mechanics.
@Chris_CDB
Жыл бұрын
Hi mate, right there are other options you have here, the reason that the oil pump was changed on this particular car is because it was still under the manufacturers warranty and it had to be changed as matter of course., however just last week I had another one in wit the self same issue, we managed to clean the oil strainer, flush the system, and fit a new belt for less that half the cost. Where are you based mate? As we may be able to help out.
@philiploud7011
Жыл бұрын
@CDB MECHANICS hi thanks for the reply, I'm based near Newport in Wales, not sure where your based too though.
@Chris_CDB
Жыл бұрын
Yea im based in Kent, about 3 and a half hours away. Would be a fair treck to recover it to me!, you would probably spend as much on the recovery to me as it would to do the actual repair!
@philiploud7011
Жыл бұрын
@@Chris_CDB yeah it probably would, kents a long way away lol, i will have to ask garages around my area i think, thanks for your video and help, atleast i know whats wrong with it now :)
@Chris_CDB
Жыл бұрын
Yea mate, sump off clean strainer, replace timing belt kit, clean vacuum pump strainer too. If you really do get stuck then send me a post code, I can always get a quote from recovery to see how much for arguments sake!
@RoyDavidson-g7g
5 ай бұрын
Save all the hassle buy a Japanese car our suzuki old 61 plate swift got 152,000 miles never needed a spanner just passed MOT No jobs to do cost peanuts to run
@sagster
Жыл бұрын
Does the engine come out the top?
@Chris_CDB
Жыл бұрын
Comes out the front mate. Front end has to come off, or you can drop it out the bottom if you have a ramp
@sagster
Жыл бұрын
@@Chris_CDB thanks for the info, much appreciated.
@jeremylister89
2 жыл бұрын
GOD! SAME AS THE BLOODY 1.0 FORD ECOBOOST(BOOM). ENGINE DESIGNERS ARE NUTS!!! DISGRACEFUL. Nice fix, but I understand Fords give no warning and the engine is suddenly destroyed.
@rajaghaffar9645
Жыл бұрын
Nice job
@joannecrosby493
6 ай бұрын
Got this fault now after a a full service and low milage car think il set fire to it
@joannecrosby493
6 ай бұрын
What a complete shit show 1500 £ at least junk car
@Chris_CDB
6 ай бұрын
Yea unfortunately that’s when it seems to show itself after you have disturbed oil filter ect! Unfortunately these cars are becoming more and more common in the workshop !
@markleggett3944
4 ай бұрын
@@Chris_CDB Chevrolet is using a version of this engine in their new Trax SUV. The 1.2 engines use 2 wet belts. Chevy says the belts should be changed at 150K. I will not be looking at one of these.
@CASHSEC
2 жыл бұрын
Brilliant work. What a terrible design. Shall never buy a C3 with this engine.
@Chris_CDB
2 жыл бұрын
Yes unfortunately it is becoming more and more common place in a lot of engines now days!.. main cause is people not using the right oil when servicing.
@rubenbraekman4515
2 жыл бұрын
This engine is used in lots and lots of PSA cars, yeah various other companies use a similar design as well... That being said I have this 1.2 82hp Vti engine and it has 170k km's without any issues, the belt was replaced once at 90k km's, I guess apart from the belt issues this is a pretty stout little engine
@philipscott1128
2 жыл бұрын
This engine is now used in many Vauxhall's too, with the formation of stellantis group
@alphatrion100
Жыл бұрын
This engine is in Opels and Peugeots too
@johnts2252
6 ай бұрын
EB0 - 1.0 L (999 cc) Euro 5 50 kW (68 hp) (Used in early Peugeot 208 I)EB2FA - 1.2 L (1,199 cc) Euro 6 55 kW (75 hp) @ 5750 rpm, 118 Nm @ 2750 rpm (Used in Peugeot 208 II, Opel Corsa F, Opel Crossland X)EB2F - 1.2 L (1,199 cc) Euro 6 61 kW (82 hp 2017-2020) (83 hp 2020-present) (Used in Citroen C1 II (2014-2018), Citroën C3 III)EB2ADTD - 1.2 L (1,199 cc) turbo Euro 6 74 kW (100 hp) @ 5500 rpm, 205 Nm @ 1750 rpm (Used in Peugeot 208 II, Opel Corsa F)EB2DT / EB2ADT - 1.2 L (1,199 cc) turbo Euro 6 81 kW (110 hp) @ 5500 rpm, 205 Nm @ 1750 rpm (Used in Citroën C3 III, Opel Combo, Opel Crossland X)EB2DTS - 1.2 L (1,199 cc) turbo Euro 6 96 kW (130 hp) @ 5500 rpm, 230 Nm @ 1750 rpm (Used in Peugeot 208 II, Opel Corsa F, Opel Grandland X, Peugeot 308 II)EB2ADTS - 1.2 L (1,199 cc) turbo Euro 6 100 kW (136 hp) @ 5500 rpm, 231 Nm @ 1750 rpm (Used in Opel Combo, Peugeot 308 III, MPM Erelis)EB2ADTX - 1.2 L (1,199 cc) turbo Euro 6 115 kW (155 hp) @ 5500 rpm, 240 Nm @ 1750 rpm (Used in Peugeot 2008 GT, Citroën C4 (2020), Jeep Avenger, Fiat 600 (2023))
@chrismills9346
2 жыл бұрын
This same thing ford 1.0 liter eco booms do
@michaelmeldhede3126
Жыл бұрын
This is not a VTI engine, this is a Puretech engine
@Chris_CDB
Жыл бұрын
Hence the title
@michaelmeldhede3126
Жыл бұрын
@@Chris_CDB did you check for oil dilution problem ?
@Chris_CDB
Жыл бұрын
@@michaelmeldhede3126 no need to, belt was replaced with new version which is not affected by the oil/fuel dilution.
@meechan1801
9 ай бұрын
What a terrible design imagine thinking that a wet belt was a good idea!!! the stuff mechanics have to deal with these days is just stupid designs engineered to fail it has to be done on purpose to make profit in aftercare cause theres no way they are that stupid
@poofighter3741
Жыл бұрын
The most stupid idea ever thought of and who thought of it? The Italians. I'm not a mechanic just a do it your selfer and was told by an old timer mechanic when changing a timing belt /cambelt never to get oil on it.
@Chris_CDB
Жыл бұрын
Yes unfortunately this is an idea that is not ideal, the belt is supposed to be oil resistant, however as you can see it doesn’t seem to live up to the task
@poofighter3741
Жыл бұрын
@@Chris_CDB Yep, My Daughter has 2018 plate Peugeot pure tech oil warning light light on and has been called in for a check by dealer I told her to tell them to change the belt free of charge. Only done 40k.
@CorradoKert
Жыл бұрын
Puretech family engines were engineered by Peugeot (PSA), so the stupid idea is french. To "resolve" the problem they changed timing belt material and shortened mileage between timing belt replacement.
@sceland1
Жыл бұрын
Idiot, the stupid idea is french!!!
@sceland1
Жыл бұрын
@@poofighter3741 idiot, this is a Peugeot engine!! Gli Italiani fanno i motori migliori al mondo.
Пікірлер: 96