Dude...reason why this video is brilliant. Not only is he extremely thorough but you have her on the other side of the camera who doesn't know squat, asking questions we wouldn't know. Great video and thanks a lot!
@GeniusAsian
4 жыл бұрын
Glad you enjoyed it! Thank you for taking the time to provide feedback.
@mcostasb23
8 жыл бұрын
Thank you for recording this video for KZitem, It's saved me when my car wasn't working and stranded. I never worked on my car like this before with my hands, now I feel confident to rely on myself
@GeniusAsian
8 жыл бұрын
Thank you for your feedback.
@TheComputergeek365
11 жыл бұрын
HOLY JUMPCUT BATMAN!!
@praisethesun6078
4 жыл бұрын
Lol 🤣
@Bytrl
4 жыл бұрын
Man, this video didn't help me at all, but I loved it. Very entertaining.
@1comedie194
3 жыл бұрын
Thank you very much for your time to help out...
@GeniusAsian
3 жыл бұрын
Happy to help. Thank you for taking the time to provide feedback.
@CarlosFigueroasaxoeventos
11 жыл бұрын
Thank you. Apparently our cars have different throttle bodies because yours is wired for speed and mine is not, something like "Drive By Wire", I think. Even when you clean your IAC valve throttle body you can see the difference to me, because neither appears! Receive a big hug from Argentina.
@Esuper1
2 жыл бұрын
If you have problems with that blue gasket and it keeps falling, use a little tiny bit of gasket paste from a small tube you can buy at auto store for cheap and put a small amount to metal side to hold it upside down without falling. It works for me every time. Very little tho, like a smear just to make the grooves where it goes tacky.
@GeniusAsian
2 жыл бұрын
thank you for taking the time to chime in, your tips may help many other viewers
@pobox411
10 жыл бұрын
Good work on removing and installing the IAC Thanks for the video.
@debrarowlett
10 жыл бұрын
Gr8 job. Thanks. keep up the videos!!! You are a good teacher.
@CarlosFigueroasaxoeventos
11 жыл бұрын
Thanks for responding. The engine code you can find it printed on the cylinder block, just below the throttle body. For example, the Civic SI has a K20 engine (2.0 liters) and our Accords K24 engine (2.4 liters), but I know of some engines that have small differences between them, for example K24A3 and K24A8 (mine). Basically I look for the differences between the throttle bodies, because they can not find the IAC valve. Look and tell me! Greetings!
@jackjacke4654
4 жыл бұрын
Glad to see you are so liked. BUT! That is not the iac, it is the high idol control valve. You also can spray the heck outta it without worries about corroding anything. It does not corrode anything these sprays. They are meant to clean as they spray on contact. Like a power washer. Rubbing with a rag also is a bonus. If you can get a rag into the area you are working... I am a mechanic of many years. If you need help just ask me what you need help with. I will do my best to help you friend. Jack
@GeniusAsian
4 жыл бұрын
yes, this video showed cleaning the throttle and IAC. There are many other components in addition to IAC that could also be the problem, see: kzitem.info/news/bejne/maWA34Z-mqOcpoI So there are many different ways to fix it: kzitem.info/news/bejne/1qGL1qajcpyAlm0
@STARMAN-uz5jt
5 жыл бұрын
Thanxxxxx. Just bought an 05' accord and this was a must change
@GeniusAsian
5 жыл бұрын
Yes, we also have a few related videos for this Honda: 1. Turn Maintenance Light Off kzitem.info/news/bejne/xXl7rIaNcnyLjII 2. change Brake Pads kzitem.info/news/bejne/uIqhqH1tcZ6mi4I 3. Oxygen Sensor kzitem.info/news/bejne/yKGkl3mMhIuTnn4
@MexicanToro
10 жыл бұрын
Awesome video! Just FYI you can easily remove the whole throttle body to make your life easier and to make the process of applying new gasked alot easier as well. I saved hunreds of $$$ thanks to this video!!!!!!!!!!!!!
@goognamgoognw6637
Жыл бұрын
This is hilarious. I enjoyed it, it explains a lot ..
@mrangulo0
9 жыл бұрын
V4 , hell yeeaahh!
@trouts4444
10 жыл бұрын
Watched this and a few other corgLC videos and they arr great. Good video, nice step wise and logical approach to problem solving. The steps are usually complete which is what most videos by mechanics miss.
@malikkaiser5139
3 жыл бұрын
you prolly dont give a damn but does anyone know of a tool to log back into an instagram account..? I stupidly lost my login password. I love any assistance you can offer me!
@romeodamari855
3 жыл бұрын
@Malik Kaiser Instablaster :)
@malikkaiser5139
3 жыл бұрын
@Romeo Damari I really appreciate your reply. I found the site through google and im waiting for the hacking stuff now. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@malikkaiser5139
3 жыл бұрын
@Romeo Damari It did the trick and I finally got access to my account again. Im so happy:D Thanks so much you saved my account !
@romeodamari855
3 жыл бұрын
@Malik Kaiser Glad I could help =)
@koshitek
8 жыл бұрын
Thanks for your videos, you can visually verify the operation of your IAC by unbolting it from the throttle body but leaving the electrical connection intact. Use something to partially block the intake hole where the IAC used to be to get a smooth idle. Also remember to clamp off the coolant hose. When the car is cold it should be wide opened, and when the coolant hit 90 degree C it should be almost 100% closed. I cleaned mine with carburetor fluid at first and didn't fix the problem. I took it out again and soaked it in penetrating fluid (pb blaster) and was able to un-jam the valve. Lots of carbon came out (1999 Acura TL).
@GeniusAsian
8 жыл бұрын
+koshitek Thank you for your tip of testing the IAC.
@RyanSteel87
10 жыл бұрын
Thanks for the video! I've been trying to get a look at the throttle body without having to take it out of my car because the cruise cable mount on the plastic cam snapped off and I'm trying to fix it. This was about as good of a view as I could get.
@arrilaurie9088
7 жыл бұрын
Great video man, these making fun of your accent need to travel the world and understand what language barrier is
@ScreenPrintR
6 жыл бұрын
Perfect Job, and great video assistant. You both made this video really helpful. I have my IAC Valve, and TPS replacements on the way from Rock Auto. Thank you, Thank you very much.
@GeniusAsian
6 жыл бұрын
Glad this video helped you. Saving money and the time is our goal.
@ScreenPrintR
6 жыл бұрын
I had to use a Hammer to break the seal on the Trottle Body and Manifold. Also couldn’t get the IAC screws loose at all. Why would they use screws on some the heats up and cools down constantly. I cleaned what I could and put it back. After changing the TPS (odb2 tester,adjusting until errors went away) everything was fine.
@ScreenPrintR
6 жыл бұрын
Any tips to get the screws off the IAC? I bought the parts, might as well change it out.
@GeniusAsian
6 жыл бұрын
I used a craftsman screwdriver with a large handle, the large handle helped, you also need very strong hands :)
@CarlosFigueroasaxoeventos
11 жыл бұрын
(Continued...) (basically what the active component would be the basis of the cleaning product). Thank you very much, I await your response. Greetings from Argentina.
@GeniusAsian
11 жыл бұрын
I tried the carburetor cleaner spray, it did not work well even though I did spray a lot into it. In order to proper clean it, you just to take the unit off, and soak it with gasoline (submerged in a large container) for a long time.
@Tim1960ification
10 жыл бұрын
Nice video very helpful. I'm headed out to talk my daughters car right now.
@GeniusAsian
11 жыл бұрын
so far, the IAC is the only problem for me. I should have just replace it the first time. However you don't know which part actually caused the problem until you experiment various possibilities.
@danielmorin9743
10 жыл бұрын
You can disconnect the cables without removing them from the bracket, which if you did remove from the bracket you would require adjustment. They come off the cam similarly to how bicycle brake cables come off. Turn the cable so that the cable lines up with the slot, move the cable up through the slot. Just be sure of the cable orientation when you put it back, being sure they don't twist when you get them around the cams. After 175K, the throttle body was stuck on hard to the manifold throat. Had to hammer it off (carefully of course, with padding). Also one of the screws holding the IACV was stuck hard. Had to twist the IAC a litlte so that it could possibly torqe the stuck screw. I was going to try and clean the original IACV, but after all the trouble to get it out, I felt it was worth the $80 to ensure not having to go through all this again. Last oil change place tightened the air cleaner cover screws so tight, one of the plastic ears broke. There was no way to prevent it from breaking. My idle started going bad a couple days ago. This afternoon when i planned to replace the IAC it went from high idle to way too low idle. Stalled out at stops. Great timing.
@CarlosFigueroasaxoeventos
11 жыл бұрын
Hi dear! Thank you very much for sharing the procedures to repair and / or maintain our beloved Honda Accord. My car has a similar flaw: without actually moving the rpm counter is enough to appreciate that the engine noise is fluctuations, indeed minimal, but fluctuations in the end, and I dare to imagine that perhaps the IACV valve. According to the procedure to clean the IACV valve Accord, I wonder what kind of liquid spray cleaner you use for this ...... (continued on next...)
@TheMike68w
11 жыл бұрын
Thanks Corg! Exactly what I needed - doing this project tonight! Great work!
@MrSKSkill
10 жыл бұрын
Great Video Brother! ~MrSKSkill
@alexcuatchon2060
11 жыл бұрын
Great vid. Had very bad idle problems and check engine light. Ran free diagnostic at oreilys and they also said it was prolly a bad idle air control valve. Very simple installation with the help of your video. The hardest part is removing the two screws that attach ICAV to the throttle body. They are on VERY tight. Thanks again!!
@Dan-oi4kt
2 жыл бұрын
Great information
@Asianfluffy
6 жыл бұрын
Thanks for a great vid! Helped me a lot! 👍
@GeniusAsian
6 жыл бұрын
thank you for taking the time to provide feedback
@benjaminredbull21
10 жыл бұрын
When the throttle is fully exposed... You can hit the gas opening the seal and spray the cleaner inside while the car is running... I think this works and is way easier than removing everything...
@davidzhang8602
10 жыл бұрын
Are you trying to clean the throttle or are you trying to clean the idle air control (IAC)?
@benjaminredbull21
10 жыл бұрын
David Zhang Not sure. My honda today was Idling low. My father came and did what I said and now it Idles normal. He was in a hurry to get back as I should say... Now I hear that can possibly blow the engine doing that? Anyways, I suppose it is cleaning the throttle...
@benjaminredbull21
10 жыл бұрын
***** It will blow smoke out your tail pipe due to the liquid burning off, but it should not blow fire out....
@benjaminredbull21
10 жыл бұрын
***** Yes. Recently my 2003 Honda Accord LX was idling bad... My dad, being a mechanic for over 50 years did this as a quick fix... Idled good ever sense... It will not go up in flames... What you have to do is open it up to expose the throttle while someone sits in the car revving it up slightly... With each touch of the peddle, the person outside will pour a bit of throttle body cleaner in while the inside is exposed... Repeat until your hearts desire... A bit of smoke will come out of the tail pipe, but no harm will be done... Keep in mind, you can pour water in and it will still smoke due to the engine burning off the liquid...
@jameswu0523
9 жыл бұрын
God safe us
@cavatina82
7 жыл бұрын
thanks for the video.
@GeniusAsian
7 жыл бұрын
thank you for taking the time to provide feedback
@kameleon3001
11 жыл бұрын
good job
@treydaypnw
7 жыл бұрын
Hey i noticed you had green coolant in the reservoir, for that K24 engine, Honda recommends their Type 2 genuine coolant that is Blue in color. the green coolant does not have the same cooling capabilities and protection as the genuine kind.
@GeniusAsian
7 жыл бұрын
I talked to the autozone staff, he said it's OK. I also called the dealer, I was told the warranty would not be avoided. Basically any silicate free eth-glycol that's safe for aluminum engines, for example Prestone would be ok.
@kewl800i
Жыл бұрын
Nice and very informative video! May I ask, does this solve the "vibrating" problems of the Accord 2004 when idle? Thanks!
@DougHinVA
4 жыл бұрын
The IAC pair of small screws are NOT USA Phillips... they are JIS type heads and need $8/pair in eBay JIS #2 bits to remove the screws. Use a dab of WD-40 or Kroil ....30 minutes before removal to loosen the screws
@GeniusAsian
4 жыл бұрын
Thank you for taking the time to share related details and tips, this will help other people to save time and effort.
@Ottonic6
7 жыл бұрын
Nice video! Thank you... Advice!.. Ditch that Haynes manual, and invest in a "Repair Manual" for your specific model. A lot more detailed and "correct".
@GeniusAsian
7 жыл бұрын
Thank you for your suggestion
@reality3826
9 жыл бұрын
I recommend gloves since carb cleaner is toxic.
@hapetaa
7 жыл бұрын
sir, there is valve ATTACHED TO THE FRONT ENGINE BODY (BRASS BOLT 24 MM) AND 'L' shape black plastic connectors one hose connected from behind the injectors and another hose come from AIR INTAKE HOSE. WHAT IS THE PART NAME AND HOW TO OPEN IT TO REPLACE?
@GeniusAsian
11 жыл бұрын
Correct, they are on VERY tight or else you must have strong fingers LOL.
@garlicdawg
11 жыл бұрын
video make me dizzy....but good info......thnx !!!
@alexnaone8433
4 жыл бұрын
😂😂😂😂 felt the same way
@GeniusAsian
11 жыл бұрын
I am not sure what is a "engine code". But on the IAC, it reads: CF12 DENSO MX136800-2030 R A A 70 203 Made In Mexico
@No_Transitory
2 жыл бұрын
You don’t have a MAF which bummed me out since my 05 accord 2.4 l has the MAF sensor near the air box. I’m having the idle issue where I start the car and it idles at 2k… but I think my issue is bad gas as the car sat for over a year with a full tank of 87 octane. It didn’t do this idle stuff before. But your system is much better to have… good video though
@No_Transitory
2 жыл бұрын
Just figured out it’s my IAC, IAT, and I had to clean the MAF (which I ended up replacing along with the throttle body) my 2005 Honda Accord 2.4 liter runs smooth
@GeniusAsian
2 жыл бұрын
thank you for taking the time to share your results, your comments will help other viewers.
@GeniusAsian
11 жыл бұрын
1. the code is K24A4, 2106886. 2. on the throttle KIHIN GY F4A 40306 3. on the front of the engine KEIHIN RAAA114-012407. I think for some year only 4 cylinder engine has the IAC. If you have V6 for the same year, then it does not use IAC.
@ViralWatchMedia
4 жыл бұрын
If only my car was this easy to access the IAC, RIP
@GeniusAsian
4 жыл бұрын
What kind of car is yours?
@GeniusAsian
11 жыл бұрын
the two screws were the hardest part to remove. If you managed to previously loosen the two screws, you will have better removals, see my follow up video titled "Absolute Minimal Removal of Idle Air Control (IAC) & Install New IAC", the link is in the description (youtu.be / 4oj3WeCjs_g)
@461rzl
11 жыл бұрын
How is a typical problem when it is dirty?? And why is recommended clean?
@kewl800i
Жыл бұрын
May I also know what is the purpose of the intake air bypass hose? The one found in @6:06 ?
@onedayatatime8756
2 жыл бұрын
You should only use CRC Throttle body & Air intake cleaner, NOT carburetor cleaner, because carburetor cleaner leaves a residue behind after it dries, sooo... You might have to pull everything apart again and re-clean it all if things aren't working correctly, and that's frustrating and time consuming. Best to right the very first time, imo.
@BiggyD626
6 жыл бұрын
6:02 what is the piece that the clamps are holding?????? Please help
@iandude454
8 жыл бұрын
I have the same accord and threw a p0507 high idle code. The idle would go between 1k and 2k. I replaced the idle air control and did the relearn procedure and now it idles at 950-1100 which is still high. Any suggestions on next culprit?
@wynnromannguyen7876
6 жыл бұрын
I changed the starter and somehow i missing engine coolant recovery hose. please help me how many hose connect to throttle body ?
@egn83b
11 жыл бұрын
The idle air control in my opinion just wastes gas. Its only purpose is to add air to off set the air conditioner demands when the throttle plate is closed. It can be bypassed with a plate and the butterfly can be set to run the engine with the throttle screw holding the plate open just enough to attain perfect idle. It can be a pain for the computer to re-learn but after that you pickup some mpg's not much but some. Thanks for the video but the focus is horrible.
@yanstev
2 жыл бұрын
Do you think that opening the throttle and spraying cleaner into IAC would clean the pathway the same thing without having to take any screws out?
@GeniusAsian
2 жыл бұрын
1. first you can't reach the IAC from the throttle easily. You may clean the throttle: kzitem.info/news/bejne/kqtpvnt5aaWLmGU 2. But even if your spray could reach IAC, you can look at the moving part of the IAC: kzitem.info/news/bejne/kqtpvnt5aaWLmGU in the video I said "look at the moving part, sometimes it is stuck", how can you spray into that moving part accurately? 3. After removing IAC and spraying cleaner, it only worked for a few months, eventually I still had to soak it for 100% cleaning see here: kzitem.info/news/bejne/laWgmYubfJykkpw
@xman0303
10 жыл бұрын
Funny video.. was there a TB gasket? seemed like there was pretty much nothing when he took the TB off.
@mosukoshI
9 жыл бұрын
there should be. usually can reuse
@KHAOE1
6 жыл бұрын
HURRY UP N BUY!!
@GeniusAsian
6 жыл бұрын
thank you for taking the time to provide feedback.
@ifeoluwaomidiranganiyu5552
3 жыл бұрын
Please what can make my Honda Accord 1999 model always start once when cold but it crank up to 4 - 5 time when hot before it respond, i have change the complete injector, fuel pump, fuel filter, Starter, also the distributor, but the same problem still occur, i need your help on how to solve the problem some time i have to start it from engine starter before it works
@GeniusAsian
3 жыл бұрын
1. make sure the battery, cables are good: kzitem.info/news/bejne/lpVm1KeInoV8m3o 2. make sure spark plugs are good: kzitem.info/news/bejne/2Gpj16WEiXiYomk 3. you said you have a new starter, so is the starter turning the engine? 4. basically two paths can cause this problem: A. do you get spark? You need to check electrical B. do you get fuel? There are many components such as those you have already replaced. But still you need to check fuel, sometimes electrical problems such as fuel relay. 5. also need to check if you have clogged air filter 6. check to see if fuel lines too close to a hot engine or other hot components, because fuel will vaporize.
@99ron30
6 жыл бұрын
Warning: Make sure you put your idle air control valve the correct way round!. On my 2002 Honda CRV 2.0ivtec I put it on the wrong way, and coolant flooded into the intake whilst it was running. Fucked the engine completely!. My biggest car mistake ever. :(
@GeniusAsian
6 жыл бұрын
Thank you for sharing your mistakes, it will help others.
@tnxsimplex2078
4 жыл бұрын
Where is the air flow sensor
@johnvillas8183
5 жыл бұрын
I could be easier to take the battery out since you’ve disconnected the cable already🤙
@GeniusAsian
5 жыл бұрын
I only disconnected one cable to reset the computer. If for some reason you disconnect both cables (bot positive and negative cables), then you may remove the battery.
@GeniusAsian
11 жыл бұрын
when it is dirty, the moving part is sticky. Watch the part in the video that I tried to move the little "door" on the IAC, it does not move as smooth when it is dirty.
@engsalah86
11 жыл бұрын
how can i get the honda accord maintenance manual ?
@CarlosFigueroasaxoeventos
11 жыл бұрын
CorgLLC Hello, how are you? I make a query, could you tell me what is the engine code that belongs to this video? Because I've tried to find the IAC valve in the throttle body of my engine (which is a K24A8) and I could not find it. Thank you very much for your answer, greetings from Argentina.
@ArtemLokhovitskiy
5 жыл бұрын
I was about to post a comment saying that A8's have "drive by wire" throttle bodies. I believe they don't have that iac valve and throttle cables as well. Makes our job a bit easier :)
@Loyal_Honda_Fan
7 жыл бұрын
Damn my cl9 accord doesnt have TPS neither mass airflow sensor how is that possible?!
@ashleypickle1328
7 жыл бұрын
The Intake hose screw is stripped on mine. Do you have any suggestions?
@GeniusAsian
7 жыл бұрын
when you say "stripped", did you mean the thread stripped or did you mean the screw head stripped?
@ashleypickle1328
7 жыл бұрын
Screw head.. sorry i just saw this.. I gave up and went to a mechanic.
@AdamAdam-gr8gd
5 жыл бұрын
Hi please I just want know som information about the low idle for Honda crv2008
@GeniusAsian
5 жыл бұрын
we listed many issues with the low idle. The idea is to look for all components in either the air or fuel path. It may inspire to solve idle problem for any cars honda or not.
@pogi09282805724
2 жыл бұрын
My car is now 12years old. All of my rubber hose are now as hard as plastic!
@GeniusAsian
2 жыл бұрын
yes, changing hoses is pretty easy.
@TIKIMAN198
9 жыл бұрын
Why do you have GRREN coolant in your reservoir?
@percyastronautstatus.8780
8 жыл бұрын
??? u must be a female right? lol
@percyastronautstatus.8780
8 жыл бұрын
TIKIMAN198 u just insulted my MANHOOD !!! THIS IS WAR !! SHOW YOURSELF !! where the fuck are u ?? show yourself keyboard warrior!! come out from behind that laptop!! U JUST CALLED ME A FAGGOT!! I CANT TAKE IT ANYMORE!! IM GOING CRAZY !!! AKNDVFDRN !!!!! SDFOVFRIVFRIOVF[OVBEBVE[=RE !!!!!!!!........................THATS RUSSIAN FOR FUCK U BITCH ASS LESBIAN !!!!
@percyastronautstatus.8780
8 жыл бұрын
TIKIMAN198 THIS is percy mother...............he just committed suicide.............thanks for your fucking help....now HOW DO U FEEL KNOWING U ASISSTED IN HIM KILLLING HIMSELF?? the cops probably will be knocking at your door within 48 hours ..the charge?? cyber bullying,,,,,see you in court bitch...OH MY SON !!! MY SON!!
@zeus-io3hn
6 жыл бұрын
hi, my friend i have an idling issue. it goes up and down at idle. does removing the negative terminal of the battery reset the throttle position sensor or relearn it. how long should i leave it disconnected. my car is a nissan bluebird slyhpy 2008yr. hope you can help me out.
@GeniusAsian
6 жыл бұрын
this one is PCM Idel Learn Procedure for Accord: kzitem.info/news/bejne/rG6MzHyhhp-WjXY
@zeus-io3hn
6 жыл бұрын
do you know about nissan?
@joseefrainamadorcarbajal5143
8 жыл бұрын
Necesito ayuda d alguien k m diga acuanto es lo k tiene k andar la revokusion de un honda acord 1998 y k m digan pork cuando lo pongo neutral c baja asta 250
@Playboyer670
7 жыл бұрын
does a dirty IAC affect the AC from getting cold while driving?
@GeniusAsian
7 жыл бұрын
unlikely. Others will effect IAC but not the other way around.
@tonycaldwell7837
5 жыл бұрын
Maybe. Because it does help compensate throttle when AC is turned on
@whttcwwhttcw9027
Жыл бұрын
So you have to reprogram the pcm after this?
@GeniusAsian
Жыл бұрын
the "proper" procedure is yes, however many people don't do it unless there is a problem.
@whttcwwhttcw9027
Жыл бұрын
@@GeniusAsian thank you so much :)
@flexapex9801
3 жыл бұрын
What are the symptoms of a dirty idle air control valve?mines doesn’t go past 3400 RPM it starts to go into a limp mode
@GeniusAsian
3 жыл бұрын
idle air control is for idling, when you past 3400 RPM are you accelerating?
@flexapex9801
3 жыл бұрын
@@GeniusAsian yes On acceleration
@GeniusAsian
3 жыл бұрын
@@flexapex9801 does your OBD II system capture any error code? The electronic control unit usually goes into a limp mode based on sensor signals from many components, your spark plugs, distributor, catalytic converter...etc
@flexapex9801
3 жыл бұрын
@@GeniusAsian It had a check engine light for a while according to my wife. We put it in the reader but no code showed. I’m thinking that the light may have burnt out but it’s not throwing a code. Spark plugs have been changed oil,air filter. And both Variable valve timing solenoid actuator. I did the coil test where you unplug the coil pack while it’s running and see if the engine idle change but the idle change with every single coil pack. i’m at a loss could it be at ECU?
@GeniusAsian
3 жыл бұрын
@@flexapex9801 you may try to disconnect some sensors to see if any error codes are generated.
@mvoss43
10 жыл бұрын
What was the idle problem eventually ?
@GeniusAsian
10 жыл бұрын
I have a follow up video to discuss the final solution: kzitem.info/news/bejne/laWgmYubfJykkpw replaced the IAC valve bought from O'reilly auto (about $80) and the problem never came back.
@infiniteightjon
4 жыл бұрын
How many miles do you have on the car?
@GeniusAsian
4 жыл бұрын
I think it was about 120k miles because I had this video kzitem.info/news/bejne/mYyb24F_koujaGU about changing transmission fluid at 120k. Since I lost the car in this incident: kzitem.info/news/bejne/lK6p0WGEaZaWnJw , I no longer have the car.
@Stevesbe
2 жыл бұрын
Use throttle body cleaner it's much better
@GeniusAsian
2 жыл бұрын
yeah, the throttle cleaner is a very good one. When you don't have it with you, you may use other methods as shown in the video. Thank you for taking the time to share, your comments will help other viewers.
@Parcerito4ever
11 жыл бұрын
Thank you jackie chan !!
@jetsetjoey
5 жыл бұрын
This guy did not continue the video to see the end result...
@GeniusAsian
5 жыл бұрын
Since there are many components on either the fuel or air paths, we have done many videos to investigate the possibilities. kzitem.info/news/bejne/1qGL1qajcpyAlm0 kzitem.info/news/bejne/laWgmYubfJykkpw kzitem.info/news/bejne/rG6MzHyhhp-WjXY In the end the car was hit by someone here: kzitem.info/news/bejne/lK6p0WGEaZaWnJw RIP
@donaldyeoman1020
10 жыл бұрын
Just don't use it in superchargers or turbo chargers. You will mess it uo to ware you need to reply sc
@mabast007
5 жыл бұрын
Lol why you need to tag cables or hoses?
@GeniusAsian
5 жыл бұрын
yes, to do any repair, I have the habit of tagging things. If I don't tag parts then I may have harder time to put them back together later on. The time I used to tag is minimal, overall I save the time for the repair. This is because the difficulty of un-installation and the difficulty of installation is not symmetrical, i.e. installation takes more time than removing parts.
@scallie6462
11 жыл бұрын
You gon need a scoodriver
@user-tx7tw9yc6m
6 жыл бұрын
Your video gave me a headache. What is all these jumps?
@GeniusAsian
6 жыл бұрын
sorry about that. Our earlier effort of editing to cut the length of the video, combined with a high data rate caused this problem. Our recent videos no longer have this problem. Thank you for your patience and understanding.
@Aluzcz
9 жыл бұрын
Gott mit uns.
@igorhump
9 жыл бұрын
Why you no use better light for camera
@coreywilliams8625
7 жыл бұрын
igorhump Lmfao
@monogenes3091
7 жыл бұрын
@Freeman Chuah
@monogenes3091
4 жыл бұрын
@Freeman Chuah
@XzBestBudzx
Жыл бұрын
Not to be rude but there was way too much explanation for this video just get to the point
@billspcclinic
11 жыл бұрын
if the problem keeps coming back and its this hard to work on, why not just sell the car. its only an 04 anyway. i was looking at one for my wife but after seeing this i wont buy it now. thanks.
@Macewrx
10 жыл бұрын
HAHAHA yours is hard to remove ??? i got a 02 SIR and its reduckclously your is on a nice angle the sir and flat inbetween the throttle body and tranny
@sammylopez8284
11 жыл бұрын
Chinese intelligence..
@Tbarca1984
9 жыл бұрын
If don't want to go through all that stupid procedure, stop watching this video.
@mollywapyo
3 жыл бұрын
😣🔫
@GeniusAsian
3 жыл бұрын
thank you for taking the time to provide feedback.
@erickmanuel5364
10 жыл бұрын
To much bla bla bla. Let's go right to the bottom line man.
@willsrestorations
6 жыл бұрын
One pork eggroll please
@christinerodriguez4563
3 жыл бұрын
This is the worst video I've ever freaking considered, triggered my ptsd and woke some kind of bias against...people like these.... amateurs. Lol
@GeniusAsian
3 жыл бұрын
Very sorry to trigger your PTSD or worse the bias. You sounded like a very serious non-amateurs person, I will challenge you $1000 in this video: kzitem.info/news/bejne/zJ94rIFuppaLlX4 other videos you may enjoy: kzitem.info/news/bejne/r6Vj2KxuoZx1jY4 , kzitem.info/news/bejne/soaM2WRpmoyboJg and kzitem.info/news/bejne/uqOKyoeInHl3ZH4
@markweidenfeller3428
7 жыл бұрын
What, speak English!
@devilik3692
Жыл бұрын
hey, i replaced maf on 2005 accord 2.4 and my idle goes high from start 2500 and raises to 3000, engine runs smooth tho do you think idle relearn can fix it? or is it throttle position sensor ?
Пікірлер: 181