More Great Content right HERE: kzitem.info/rock/SplKs9YubPQt_2ZQJxg3cA
@keithroe4548
3 жыл бұрын
I love copper
@BIGBADVENTURE
3 жыл бұрын
Bro, love your banter, informative and useful, easy instruction on how to run things smoothly and earn some good coin. Very courteous indeed, for all the support you've shown me, the least I can do is share you out and hope we can drive traffic through you're channel. Love ya my bro
@RoeMantic
3 жыл бұрын
Thanks my brother from another. Much love for you man!
@rayeverydaydiver7425
3 жыл бұрын
Roe that shirt is awesome my bro 👊 thank you so much for all your support my brotha 👊🙏❤️
@RoeMantic
3 жыл бұрын
Anytime my dude!
@TheRealDiego
3 жыл бұрын
Roe Mantic's workshop I like how it sounds.
@RoeMantic
3 жыл бұрын
Hahaha I like when he actually goes to work bbaawaaaahhhh
@TheRealDiego
3 жыл бұрын
;P can you actually fire the guy?
@AliMackMechanical
3 жыл бұрын
Nice way to reclaim the copper out of them rads. 🤙👍
@RoeMantic
3 жыл бұрын
Thanks buddy
@randystone6781
3 жыл бұрын
Roe, great video and really good tip! Even a decrepit old man like me can do this. Thanks for showing us how to maximize our profit... ☮️
@RoeMantic
3 жыл бұрын
Thanks man for watching!
@JohnnySwedishScrapper
3 жыл бұрын
copper are better and yes i clean it as well ;) its messy but better proffit ;) great video
@SollersScrappingandDiving
3 жыл бұрын
Definitely worth it, great demonstration and deffo a great method of getting that copper out too!! 👍
@RoeMantic
3 жыл бұрын
I have one more way in mind. I'll show it if I build it!
@UKscrapper
3 жыл бұрын
Definitely worth the time to strip and get that copper out great video smashed the 👍up
@RoeMantic
3 жыл бұрын
Thanks buddy have a great weekend!!!
@stevesrt8
3 жыл бұрын
i got to find some fans. that looks like a nice zinc score for sure. Great vid brother. cheers
@RoeMantic
3 жыл бұрын
Not all covers are zinc but these ones I got lucky on!!! Cheers buddy!
@EstonianScrapper
3 жыл бұрын
that was a really easy way to get that copper tubing :) thanks!
@RoeMantic
3 жыл бұрын
You bet buddy!
@bradlang9494
3 жыл бұрын
Hey Roe, great video. I appreciate the calculations so you can get an idea on how far to go with your scrap. I work a full-time job (40+ hrs) and scrap in my spare time. I love it. I honestly wish I could spend more time scrapping but I'm paying off my house so got to keep on the grind. Really looking forward to seeing your press build, I'm thinking of building something similar also. ( big fan of project shop fl ) Keep rolling out the vids cause I'll be watching before I hit the sack. Cheers from Gold Coast, Australia.
@RoeMantic
3 жыл бұрын
Hey Down under, thanks M8 for watching. Enjoy some of the old videos and have a great week friend!
@cuscrapping
3 жыл бұрын
Nice video. Quite honestly, didn't think the numbers would work, but now I see $30+/hr...not bad!! You need one of those Chinese machines that you run them through and 2 seconds later, it comes out the other end all seperated!! LOL!!! Just got to put up probably $20-30K for the machine!!!
@RoeMantic
3 жыл бұрын
I can build a cheapo one outta tread mill rollers and some welding. I'm gonna try one day if I can make enough money to have some spare time hahahaha
@Man-in-da-shed
3 жыл бұрын
The chines are always sending me links to their machines.
@bfdmanbfd
3 жыл бұрын
I use the angle grinder 2 cuts to make a V shape on each pipe then just pull it out that how I do it work well for me
@JudymaeCollins
3 жыл бұрын
That's a good job. Thumbs up for sure God bless
@RoeMantic
3 жыл бұрын
Thanks for your time in watching the video. Hope you enjoyed Judymae
@ProjectShopFl
3 жыл бұрын
That’s a nice trick you got there, I wonder how that would work to a bandsaw. Nice break down, when are we going to see that footpedal you bought? Lol
@RoeMantic
3 жыл бұрын
Soon I bought the wrong step down/ reducer for the press hydraulic line! Bandsaw might work decently. If ya have time and want the copper bad enough it's worth it my friend!
@anfieldroadlayoutintheloft5204
3 жыл бұрын
Good video keep posting videos up stay safe lee
@RoeMantic
3 жыл бұрын
Always friend
@Man-in-da-shed
3 жыл бұрын
Living in a cold wet clime, we don’t see big. Rads like that, but I would definitely strip em,
@RoeMantic
3 жыл бұрын
Always good to go for the copper even if it's time consuming! It piles up prettiest LoL
@Man-in-da-shed
3 жыл бұрын
@@RoeMantic we love coppah
@RoeMantic
3 жыл бұрын
Oh yeah!!!
@streetcopper1151
3 жыл бұрын
Make that money .. and why not make the most that you can 👊🏻
@RoeMantic
3 жыл бұрын
It's time consuming, luckily I have the time hahhaha
@streetcopper1151
3 жыл бұрын
@@RoeMantic little by little brother 👊🏻
@tomlim4406
3 жыл бұрын
Thanks buddy👍🤟❤️
@RoeMantic
3 жыл бұрын
No probs!
@ewastemike7700
3 жыл бұрын
Good tip bud. Clean that mess. LOL. I don't get enough to do that. :(
@RoeMantic
3 жыл бұрын
You get enough to pile up. I've seen it on video! But would it be worth your time is the question ya know! I have plenty time between scrap pick ups at the moment my friend. Thanks for watching Mike and the share earlier!!!
@billjunking_fool5549
3 жыл бұрын
nice video, I've done that with copper a little bit before, it's a time to copper was pretty low in price probably worth it at the current prices look forward to seeing your press in action that's one of my projects but I'm from slowville😁👍 I used a bandsaw
@RoeMantic
3 жыл бұрын
Thank you Bill for watching buddy. Press video soon brother!
@kdscrapping4452
3 жыл бұрын
Nice!! I do not get any of the big ones!!
@RoeMantic
3 жыл бұрын
Steering clear of the she said jokes, the little ones clean up good also. You get a bit of the rads my friend!
@Treebronx
Жыл бұрын
I been using a grinder, maybe I should try it like this
@scrappyhustler7467
3 жыл бұрын
I'm getting 2.15 per lb on my acrs and I'm getting 2.25 on number 2 so for me its not worth the 10 cents unless its motors for bare bright cause thats at 2.75 a lb! But thank you for sharing
@RoeMantic
3 жыл бұрын
Wow 2.25 for number 2... Where are you.
@LilMilely
3 жыл бұрын
2.15 LB for #2 you better go to a different yard because my yard is paying 3.55 LB for #2 so call other yards in your state or states near yours.
@scrappyhustler7467
3 жыл бұрын
Staten Island
@RoeMantic
3 жыл бұрын
Those prices are way too low! You need to call around and find a better paying yard plz!
@armandosalgado5465
2 жыл бұрын
Thanks for your advice.
@lfurches
3 жыл бұрын
👍👍
@tomroe2861
3 жыл бұрын
Love it
@RoeMantic
3 жыл бұрын
Thanks Roe!
@tomroe2861
3 жыл бұрын
@@RoeMantic not too many of us with the correct spelling
@tomroe2861
3 жыл бұрын
I have you locked in now. Will continue to support your channel
@silverado708
3 жыл бұрын
It's well worth stripping the copper. It adds up fast
@RoeMantic
3 жыл бұрын
Never adds up fast enough friend lol keep Scrapping!
@silverado708
3 жыл бұрын
@@RoeMantic no lie there.
@muriaticacid7004
3 жыл бұрын
Thumbs UP
@RoeMantic
3 жыл бұрын
Awesome!
@jasonmadden6771
6 ай бұрын
Yeah that's cool, but what about the ones that have two, three or four rows in them. Not as easy as the single ones. That's what I would like to see. A single row is simple enough anyway you do it. Don't get me wrong it's a great way to do those. But the multiple rows are what you really need to show. If you get this comment I just want to say thanks. And keep it up
@RoeMantic
6 ай бұрын
Still trying to build a bicycle pocket rigged up shady machine for that. Gonna need time and funds. Stay tuned 😉
@tommyroach3960
3 жыл бұрын
awesome video love it u have excellent ways doin stuff bro 😎 love u videos thumbs up from the tommy gun 👍👍👍👍😎😎😎😎😎
@RoeMantic
3 жыл бұрын
Thanks Mr. Tommy
@tommyroach3960
3 жыл бұрын
welcome my bro 😎
@StephenMarks-wo4uk
Ай бұрын
Nice
@CruiserMac
3 жыл бұрын
Too bad about breaking the bit, don't be de (pressed). 😁😁😁
@RoeMantic
3 жыл бұрын
Good one!
@digitalmusic4803
3 жыл бұрын
A lot of the copper was leaning on something not on the scale. True weight might be 8 pounds.
@RoeMantic
3 жыл бұрын
Yeah I was tired and didn't notice. I'll do a total weight soon kinda a recap vid! Thanks for watching!!!!
@Twoface0233
2 жыл бұрын
Although I do see why you could do it like this, I just don’t have the space to store all the damn aluminum and make it worth something. Plus I don’t do this for a living, just a side hustle. Neat video.
@RoeMantic
2 жыл бұрын
Only do this in large quantities. If small amounts just take in clean with ends cut off. I rent this space to scrap in. The first 30-50 lbs pays for everything!
@ronjohnson2693
2 жыл бұрын
Hey love the video. Do you have a way to extract copper from a quad-core radiator?
@RoeMantic
2 жыл бұрын
No Ron I don’t pull the copper out any more I’m getting a great price for them now!
@endfedinctaxonindividuals7486
8 ай бұрын
Cut in on a worktable!! save your back!!
@ScrappingwithGrandpa
2 жыл бұрын
I got spammed by someone trying to act like u. Telling me to go to a website and that you make 11,099 dollars a month snd a bunch of other stuff. I did not click on there link. And also I met a guy today when I was filling out my propane tank and he told me that he watches your channel.
@RoeMantic
2 жыл бұрын
You didn’t get spammed by a guy acting like me that was me messaging you on my business page from Facebook!! The link takes you ti my regular profile on FB silly!
@shanedollarhite7686
28 күн бұрын
Yea that's a quick way of doing it but ur wasting ur aluminum don't belive it would be effective on small radiator from window AC
Пікірлер: 84