Great video!!! Thanks to you I just finished cleaning my doser . Broke the wall of soot coming from my exhaust to my turbo. Now I’m doing a park regen. At first I was unable to.
@takabrowng.8286
13 күн бұрын
I been a owner operator for 20 years and I remember in 2000 with no KZitem videos like this one a was hard but this days thank you KZitem and diesel mechanics there is too many diésel repairs videos like this one and we are saving thousands of dollars in truck repairs and maintenance thank you for this video
@evansntim430
4 жыл бұрын
This is wonderful video I ever watch, you save me a lots of money after watching this video, I have the same 2009 cascadia with Detroit 60 series. I had check, stop and regen sign on my way to Massachusetts from Columbus oh somewhere PA I had this issue. I was told to stay there regen nothing happens, so I used override to deliver my load then back to Columbus oh. I went to ww Williams to diagnose they told me it's fuel compensation sensor needs to be replaced and it will cost me $1,225 after I came home trying to look for solution I came across this video, first thing in the morning I went to my truck followed the instructions. After cleaning the injector and replaced it. I started my truck then there regen started, it took about 2 hours meanwhile bf it regen for 10 to 15 minutes then it stopped. But this time it took a long time after regen all the lights are off. Everything works perfect. So I didn't go back to shop. Thank you. Thank you whereever you are off you see this message all I will say is Thank you once again.... Keep posting...
@vicmed6088
4 жыл бұрын
glad my video was able to help you
@paulgassler1021
8 ай бұрын
Thanks for posting this. I just got a MBE4000 with the same scr system. Going thru the steps to get proper regen and this port was clogged as you showed. Cleaning will be on my annual list of 'tinkering' on this engine.
@firstname6208
6 жыл бұрын
what he calls the "piston" is actually the 7th injector or hydrocarbon doser valve. it injects small amount of fuel into the HOT exhaust stream to raise the temp of the substraight to do the actual incinerating of the soot particles that are trapped in the dpf (diesel particulate filter). this unit looks like an epa 07 series 60. dd 13 and 15engines are similar. if the injector port gets plugged with carbon as this one was, the diesel just dribbles down the exhaust pipe and loads up the dpf. you get cold and incomplete regens. lots of idling builds that carbon quicker than if you idle the engine up or idle 3minutes after leaving the road and shut the engine off.
@malcolmjames77
5 жыл бұрын
First name: do you have a chanel as well?
@carbombtorres1761
5 жыл бұрын
Will this affect trucks with a dpf delete in any way??
@fredc8618
5 жыл бұрын
hey bro puts the vids up you're very knowledgeable
@jaimecruz5367
4 жыл бұрын
Carbomb Torres I think once you delete it you won’t have any of this problems
@nickquik
Жыл бұрын
What cylinder is that number 7 injector connected to?
@oraliaornelas5742
4 жыл бұрын
Thank's I just started managing the shop for my family business. We run about 65 trucks and I still have a lot to learn. Video really HELPED!! Thank's look forward to more.
@vicmed6088
4 жыл бұрын
Glad to help
@charlieabbot3649
6 жыл бұрын
A .22-.45 calibre gun cleaning brush in a cordless drill works as well. Great video.
@luashelton9320
6 жыл бұрын
Fantastic videos! I'm learning boatloads from you. I love the calm, relaxed pace of your manner of teaching. Thanks to you I'm finally filling in the embarrassing learning gaps --all the stuff I should know after 34 years as a company driver. I'm hooked on your channel!
@vicmed6088
6 жыл бұрын
thanks for tunning in
@tyflesh
6 жыл бұрын
Had a 2010 cascadia figured this trick out after 2 shop repairs of 1500 a piece, my was a dd15 set up a little different I would us my air compressor to blow the dozer inject out and the dozer block, did this twice a year and my problems with that damn dozer injector went away, dealer really rapes you on these repairs.... Good video Vic...
@johnrogan9420
5 жыл бұрын
You are a professional driver sir....old school!
@hollywoodsaint57
2 жыл бұрын
Hell ya! great job! ...Im changing the entire dosser injector on my 2014 peterbilt 579...I personally believe the sensor has gone bad...the part was $675.41 + tax came out to 722.41 at Peterbilt of Atlanta in Jackson Georgia. I'm missing the holidays but hope this will get me home to Los Angeles
@STANKY_NUTZ
6 ай бұрын
On your DEF doser? If it was the def doser valve with the 3 lines attached to it was probably white crystallization from def fluid clogged the hole, I have a 2015 kenworth T-680 MX-13 went in to full derate behind it, I purchased the same thing you did for $800 after tax then seen I could have ordered the exact same one for $150 on line in 2 days so I pulled it out and cleaned it and cleared the port and it took care of the entire issue and I returned the $800 doser valve
@hollywoodsaint57
6 ай бұрын
@@STANKY_NUTZ unfortunately I was on the road in the middle of a load ...so that specific peterbilt parts department was open 24hrs and basically across from a flying J ...so I dropped the trailer and bobtailed over there...there are 2 dosers..the one on the engine side is connected to the Coolant lines. So the coolant would have to be drained before you could replace that one...derating sucks...
@user-bn2rt1cm9m
6 жыл бұрын
I just took truck for lease option to buy..and your recommendations helped me a lot..,
@Boyleheights213por-vida
3 жыл бұрын
HELLO VIC 👋 BROTEHR IM A BIG FAN OF YOU IT TOOK ME A 1.5 HRS TO FIND THIS VIDEO MY MECHANIC TOLD ME TO CLEAN THIS AND I REMEBERED WATCHING THIS VIDEO...THANK YOU HERMANO..P.S.I AM NOW A OWNER OPERATOR AND LEARNED ALOT FROM YOU BLESS YOU AND YOUR WIFE BOTH OF YOU HAD TURNED ME INTO A MECHANIC...GOT MY CERTIFICATE FRON VIC SCHOOL OF TRUCKING 🚚 😆 TAKE CARE HOPE TO RUN INTO YOU AT THE TRUCK SHOW IN ONTARIO
@biniamtedla821
4 жыл бұрын
Am really appreciate for your time and We learn something. 10 Q so much Sir
@gherasimtibi
7 жыл бұрын
u helped alot of people out. THANK U
@omerhusic823
3 жыл бұрын
It's good to know thanks keep gaining with Nader things whot can stop us on the road.Thanks again
@Deathspath1
5 жыл бұрын
I want to say out of all the videos I've watched so far yours is the easiest one to go step by step thank you for that. I'm new to this def system all together all of my trucks before this were predef. Believe me I miss pre def system truck LOL. But my truck is doing the exact same thing you said yours was doing. So now I know exactly where it's at and what to do to fix it thank you very much.
@vicmed6088
5 жыл бұрын
thanks for tunning in,best of luck
@stoneyislandranch9783
3 жыл бұрын
I will add one little detail.. be careful When you loosen that fuel line.. make sure it's actually turning and your not twisting it.. that fuel line is exspensive and difficult to replace.. also if you must use a fluid to clean the dozer injector .. use nothing other then diesel..
@finessekamp
2 жыл бұрын
Going through that problem now
@finessekamp
2 жыл бұрын
How did you get yours replaced…and is that a high pressure line?
@harleyss475
7 жыл бұрын
... piece of cake... great video... never thought to clean it... !!!
@nonimportant3505
Жыл бұрын
You can also use air nozzle to blowout inside of injector. U can do this with dd15 engines too when u get a code.
@cedricpleasant9062
2 жыл бұрын
Damnnnn. I just took my truck in because of the same issues. I’m new to bug trucks . I was hauling cars with a dually. I know Freightliner is gonna take advantage and rip me off.
@albertalcala2129
7 жыл бұрын
Thanks Big Homie for that good video and information, I'm going to keep an eye on those lights bercause mine have been coming on also but it goes away on it's own, gracias ese.
@firstname6208
6 жыл бұрын
the main reason the dosser valve port plugs is from excess idling. bump up your idle speed if you must idle, or use the pony motor whenever you can. excess idling can also cause egr cooler to crack. the egr valve will open and the water pump is turning too slow to circulate the coolant in the egr cooler. when you see green crystals going into your intake manifold more than likely the cooler is cracked internally. works the same on s60 as well as the DD motors. better have some cash, it will get expensive in a hurry.
@aj4985
5 жыл бұрын
This is not true
@TheTruelakersfan
2 жыл бұрын
Lies
@TruckDriverAzevedo
10 ай бұрын
The best way are install a APU …. No idle your engine, the turbo life come more shortly, the turbo need rest a minimum 8 hours after work hard…. Too!!
@jasonl2335
5 жыл бұрын
Isn’t it also called the “Seventh Injector” hit it with brake clean and a brush. Good to show videos of these newer trucks and how to save money and most likely time. 👍
@transport21
4 жыл бұрын
Jason L yeah it's also called that. I say after you've past 500k miles it's best to replace it it's like $150 I think. Just to be safe.
@user-nh6vu3qr7b
Жыл бұрын
That's what I did the break cleaner breaks all the soot and diesel and dries fast just airs out.
@loadhauler5301
6 жыл бұрын
Ok thanks. I'll keep watching and encourage others to watch and subscribe. Thanks for answering :)
@raworthyel3786
5 жыл бұрын
All your videos are Excellent. Thanks
@vicmed6088
5 жыл бұрын
thanks for running in
@hugoguzman6059
5 жыл бұрын
Gracias jefe por su video me a ayudado mucho 👍💯
@vicmed6088
5 жыл бұрын
de nada
@myrnapagan3280
5 жыл бұрын
@@vicmed6088 me voy a subcrbe to your chanel. nececito apreder mas de mi camion. siempre me cojen de pendeja gracias.
@bobijutje1
4 жыл бұрын
Very helpful and informative video!
@DrZoe-zb8ux
6 жыл бұрын
Subbed!!! Bro you’re the best. All of your videos are helpful. Good explanation. Keep up the good work!
@vicmed6088
6 жыл бұрын
thanks for tunning in and your comments
@jeromerobinson1707
Жыл бұрын
Good information
@rigthawayfreigths3252
5 жыл бұрын
Callme crazy but i press like buton even before wach your videos ik it be a good one lol tank you for help us on how to doi it salute
@Thomas_Jefferson1
7 жыл бұрын
Wigl wigl wigl..... play with it 😅 Thank you sir, that's what I was looking
@oicu24me
5 жыл бұрын
Dam fine job I’d done it befor but had kind of forgot how. Good refresher course short sweet but to the point
@justbeforethereturnofchris2393
3 жыл бұрын
Thxs for the knowledge man!...God bless....
@IEraiderfan
7 жыл бұрын
VIC, a very good video easy to do thanks.
@topdogfreightliner9148
7 жыл бұрын
Good as video thanks for putting these videos out.
@mikeshotshothauling9243
2 жыл бұрын
I absolutely hate these newer DD’s emissions systems ( I have 2017 Shaker with DD13), but I love your channel Vic !! You have taught me so much this past year. Huge help!! Do you have any suggestions for an DD engine analyzer/tuner?? I currently have a Nexus Nexlink NL102P that I don’t really like. Can never seem to do a forced regen like the company told me I could. Thanks again Vic!!✌️
@davidmedina5412
6 жыл бұрын
you are the man.thanks for sharing this and posting it
@CashisKingtrucking
Жыл бұрын
👍🏻👍🏻👍🏻 great information
@willphipps4820
3 жыл бұрын
God Bless u vic...ur the man....
@victormartinez5349
5 жыл бұрын
NETA EXCELLENT VIDEO AND EXPLANATION THANKS VIC REALLY LIKE THE WAY YOU SHOW AND EXPLAIN THE HOW TO✅✅✅✅✅🙏🙏🙏🙏🙏THIS WILL HELP ANYONE SAVE LOTS OF MONEY 💰 ON REPAIRS AND DOWNTIME JUST DO IT YOURSELF PREVENTIVE MAINTENANCE 🗝⭐️⭐️⭐️⭐️⭐️⭐️⭐️💲
@rrubio3608
5 жыл бұрын
If you push the wall of soot in with a screw driver where does the black spot go? Doesn't the carbon then stay inside the hole?
@victormartinez5349
5 жыл бұрын
YES THE CARBON BUILD UP WILL STAY INSIDE WHEN YOU CLEAN UP THE HOLE 🕳 WITH A FLAT HEAD SCREW DRIVER BUT IT WILL BURN OFF WHEN THE REGENERATION IS ACTIVE SO IT WILL NOT HURT IF THE CARBON BUILD UP FALLS INSIDE THE MANIFOLD ALSO CLEAN THE SENSOR AT DRIVER SIDE INTAKE CHARGER WHICH ALSO BUILDS UP CARBON DEPOSITS AND CAUSES A CODE TO POP✅ REMOVE CAREFULLY DOSER BOLTS AND COVER DOSER TIP TO KEEP DEBRIS OFF
@laythalhamadani6022
3 жыл бұрын
Thank you so much fir your helpful videos
@user-bn2rt1cm9m
6 жыл бұрын
Very helpful video, thank you very much
@keepitreal1969
5 жыл бұрын
Just a note it's better to clean the injector with a tooth brush if you used a wire brush you can damage the little hole and it will not spray the way it's supposed to The hole is the size of a needle for this reason it's better to use a toothbrush
@user-nh6vu3qr7b
Жыл бұрын
U can add Carburetor cleaner or sea foam
@walkingfaith5842
6 жыл бұрын
Thanks vic....you are great man...good job.
@vicmed6088
6 жыл бұрын
thanks for tunning in
@RomainGreen2NDPAGE
5 жыл бұрын
Much respect you save my ass $$$ and I loaded at 90k and I had to get this load to the deliverd.
@vicmed6088
5 жыл бұрын
thanks for tunning in
@hdera1980
7 жыл бұрын
Good afternoon I like watching all your video bro. I have a 2013 Freightliner Cascadia. With 3 fault code that keep on off .spn 004334 ,004335 and 0841
@pammayberry3184
2 жыл бұрын
Just watched your video. Gonna try to do this myself, but not sure I'll be able to.
@josemilian1707
6 жыл бұрын
God bless you thanks...
@CashNYC
7 жыл бұрын
I try to clean mines out few months ago and I had a hard time taking the doser injector.. I took off the cover but gave up.. gonna try it again this weekend.. it's tight to get into that area
@vicmed6088
7 жыл бұрын
shyeem63 I know its a tight squeeze on the dd15.you'll get it bro.good luck
@morrislyons5435
3 жыл бұрын
Thank you brother.
@raywebb8215
Жыл бұрын
Ok… so the carbon is getting knocked back into whatever it is the dossier valve unscrewed out of. Is it. Good for big chunks of carbon to be wherever it’s falling into? I assume that’s an exhaust pipe but isn’t that all headed to the filters? Will that carbon just burn up in a regen? What is the part that has the two bolts that the injector is screwing into and does it ever get replaced?
@truckerjon7255
5 жыл бұрын
Need a gallon of fuel catalist from Pittsburgh power it will help that you just add it to your fuel every time you fuel
@MahA-pr7kr
4 жыл бұрын
Freightliner Cascadia Evo 2016 My truck asked me about region so I did the region for my truck is took about 1 hour 10 minutes to finish then before the region finish I got the engine light comes on With code SPN 3713. FMI 31 I'm not sure if this is the same problem the one you got Thank you For brother
@c.knoxville5998
4 жыл бұрын
regen!
@firstname6208
6 жыл бұрын
people there are 3 lines going to the dosser valve (hydrocarbon dosser/ 7th injector) whatever you want to call it. coolant in, coolant out, and fuel in. do not under any circumstance bend those lines. if they rub on anything, if they rattle inside a p clamp you will rub a hole in the line. if you rub a pin hole in the fuel line that close to a very hot turbo that truck will go up in flames faster than you can stop and GTFO of the cab. all three of those lines are interwoven around the engine brackets, exhaust manifold, lift brackets etc. they are an SOB to change. been there done that!! it aint pretty!!
@manuelsalgado8510
5 жыл бұрын
Are you saying his method of cleaning with the wire brush is not good? Breaking out all that carbon build up won’t cause an issue down the road?
@vinomuru7471
Жыл бұрын
Ur best
@waldemard8365
6 жыл бұрын
Thank U. It was very helpful thanks.
@tyflesh
5 жыл бұрын
I use my air compressor to blow that doser valve out because it had build up from crap in the tank
@CrazyxxxUkraine
Жыл бұрын
Did not know there was a 60 series with def 🤯
@Dlive2005
7 жыл бұрын
Good vid vic your closer to 1k subscriber good channel
@kennethknott1347
5 жыл бұрын
GREAT VIDEO
@johnward2131
3 жыл бұрын
Good job Jefe!!
@simuljustusetpeccator5547
6 жыл бұрын
Wish I would of seen this video before paying the dealer $700. Now I know!
@anonymoustrucker1782
5 жыл бұрын
Probably best to let them do it because if you break the fuel line....oh boy we talking about $8000 to replace a fuel line $50 for part $7950 for labor
@stoneyislandranch9783
5 жыл бұрын
@@anonymoustrucker1782 r u serious.. that sounds exaggerated ?
@anonymoustrucker1782
5 жыл бұрын
@@stoneyislandranch9783 That is a guesstimate. Maybe off a couple of grand but they will have to disassemble most parts of the motor just to run a fuel line..
@stoneyislandranch9783
5 жыл бұрын
@@anonymoustrucker1782 I'm about to do this hope it comes off with a bit of pb blaster
@anonymoustrucker1782
5 жыл бұрын
@@stoneyislandranch9783 Does it need replaced or you're doing preventative maintenance?
@graylingdrummond9421
4 жыл бұрын
Great job and nice video, what year truck and type engine this is located in.
@shallyamol
7 жыл бұрын
Respect 4 u sir .. Thanks
@mcmurraybrotherstransporta2830
3 жыл бұрын
good stuff.. Big fan of Guys that get to the point of the video, i just Subd.
@user-kq8fx2sg2x
6 жыл бұрын
Thanks for the video
@africanmamba8524
5 жыл бұрын
Tnx for the info
@seven1productions819
4 жыл бұрын
Subscribed thanks
@tyflesh
6 жыл бұрын
Dealer will charge 350-400 bucks for that dozer injector I got mine of ebay for 90 bucks and kept a few for spares, very simple to do it will save u alot of down time and $$$$
@diebsaigh2124
6 жыл бұрын
Good stuff buddy thank you. I have a question where’s the fuel sensor located?????
@vicmed6088
6 жыл бұрын
it will be on top of your fuel tank,on the driver side,come to think about it,i have to squap that one out as well,thanks for tunning in
@onehitrr1742
5 жыл бұрын
Thanks so much for this vid
@davidsilva5175
5 жыл бұрын
Gracias tnks for the video
@MH-xc4nf
7 жыл бұрын
Hi Vic, fellow Have 2009 freightliner 60s Started this problem eng throttle pos erratic 128 051 02 . I changed the accelerator paddle Still problems existence . Need some advice . Thank you
@lifeofbetrayal
5 жыл бұрын
Órale loco. Thank you. Save me some $$$
@stevenliberadzki9160
3 жыл бұрын
Not saving you money. Dd says to replace. Never to clean.
@ROLLIN-DUB
5 жыл бұрын
Excellent I’ll be a u tube mechanic before long. We should educate ourselves and put those Steelers I meant dealers/ mechanics out of business (maybe lol)
@vicmed6088
5 жыл бұрын
LOL
@662theo
Жыл бұрын
That won’t happen the mega carriers still go there
@davidmedina9644
7 жыл бұрын
good video.
@koumphal
5 жыл бұрын
Question I have 07 century. It is lagging and doesn't have power to shift to not gear. Tubor start kicking in when RPM 18. And keep lagging until I pass RPM 15. Please help thanks.
@jessicawillette8260
5 жыл бұрын
Thank you.
@AnhHaiCanTho
7 ай бұрын
I have code SPN 5394 Diesel Exhaust fluid dozer valve. It’s this the same you have?
@glackaglack1534
7 жыл бұрын
These type of video I like.
@vicmed6088
7 жыл бұрын
thanks for tunning on,
@vitos18
4 жыл бұрын
Thanks
@temoaguil1830
6 жыл бұрын
okay 👌🏼 im going doing in my truck and i let you know if’s work,thanks very much
@MrJachacon
2 жыл бұрын
What happened to your truck same thing happen to me I have a freightliner straight truck with Mercedes engine mbe900 exactly the same thing
@yeahboy28100
4 жыл бұрын
Good video, I was wondering actually what engine is that? I have a 06 Columbia I don't have to do a regent.
@newbeavsteve3802
7 жыл бұрын
Thanx Vic
@rubberduckyconvoy2723
6 жыл бұрын
DRIVER I AM SO MUCH THANK YOU!!!!!
@vicmed6088
6 жыл бұрын
thanks for tuuning in
@mayyouprosper8140
3 жыл бұрын
Nice man
@henryjohnson7822
5 жыл бұрын
Thanks for the info
@coach2208
3 жыл бұрын
It would be nice to know what kinda engine ur working on.
@loadhauler5301
6 жыл бұрын
If you can, can you do a video on a Kenworth T800 2013 there s a bad ground. Effecting my lights. Thanks Vic.
@vicmed6088
6 жыл бұрын
sorry i dont know anything about your truck,thanks for tunning in
@davidbrooks4285
Жыл бұрын
Since when does a series 60 have DEF,because that dozer is for the DEF
@franciscocabezas3740
3 жыл бұрын
I have a question I have a series 60 that has a exhaust or fumes leak that no mechanic has found and even the dealer didn’t find anything I did almost everything can’t find what is it only when the truck is on the road I can feel the smell let me know if you or someone had this problem it might help i will appreciate
@ginoandconni
6 жыл бұрын
Thanks buddy, very helpful video. Question, I have a 2016 Casacadia DD15. What recommendations do you have for maintaining The DEF system?
@vicmed6088
6 жыл бұрын
just do your maintanance on truck with delvac oil and always good fuel,not cheap fuel
@abumuslima4557
6 жыл бұрын
Thank you you the man.
@vicmed6088
6 жыл бұрын
thanks for tunning in
@nramroop79
6 жыл бұрын
Hi buddy i got a Question...i got a 2012 VNL 670 Volvo ..the issues I'm having my truck keep on asking me to do a regan maybe 2 time a day
@vicmed6088
6 жыл бұрын
that sound like a sensor is going out on you,take it to the shop,good luck with that,thanks for tunning in
@AlseeMcCray
Жыл бұрын
why are you calling it a piston? isnt it an injector?
@franmitch3589
4 жыл бұрын
What was your truck doing that caused you to change it
@joshweiser7737
5 жыл бұрын
What codes did you have
@vicmed6088
5 жыл бұрын
i cant remember,
@jpeps1310
2 жыл бұрын
Do you where is the fuel Doser on a 2013 H HINO 268A located
Пікірлер: 233