Another great video, Sam you've been pumping out content like a beast!
@barevids
2 жыл бұрын
CPU IS SWEAT
@Jamez84
2 жыл бұрын
@@barevids I love watching your video's man, please keep them coming. Your videos the reason I bought a Taramps HD 3k and even though I'm not repairing amps I still enjoy watching your work and learning.
@barevids
2 жыл бұрын
thanks man thats awesome to hear!!
@Jamez84
2 жыл бұрын
@@barevids If you ever get a Seismic audio amp in the workshop please do a video on it. They make a lot of pro audio stuff and came out with some car amps. Its one of those amps I've seen on Amazon but never seen in real life or anywhere on KZitem. Just asking... lol They got a 4 channel I'm thinking bout getting as my next buy.
@ds1919ds1919
2 жыл бұрын
This guy is a genius!!
@Jamez84
2 жыл бұрын
I've said it in the past, the biggest killer of amps is their owners. Clipped to death, frayed connections that allow stray copper strands in the amp, and poor electrical systems or connections.
@JaredElliott1
2 жыл бұрын
I cry when my amp fails...this guy grins and claps his hands!!
@craigedgar2828
2 жыл бұрын
Skills bruv! I learn so much in each video, thanks heaps
@shanecabbage2187
2 жыл бұрын
My take away is: don't buy JL. Thanks for your humor and great info.
@lmadden6236
2 жыл бұрын
The older Kicker KX2500.1 was indestructible.. Low voltage, clipping, excessive heat and it never gave up.
@FrankStPeter
2 жыл бұрын
Just wanted to thank you for the video on how to run multi amplifiers without strapping it worked like a dream and I have twice the output,,, I have two 1500.1DZ on 4,,10 inch DC Audio Level ones
@mikehonda7934
2 жыл бұрын
@barevids nice work man. Crazy how simple JL amps can be to repair. Then, sometimes, they can be a nightmare. Those HD amps don’t like being clipped and ran hot. That’s how my old HD750.1 got fried. Friend of mine burnt up my amp. When the amp gets hot, it lowers its power and when it’s safe to run, it will give you peak power again. The little LED is a status light that changes color to let you know. Bet the owner ran the amp hot and kept turning up the knob till it couldn’t take it anymore. Love the new style of video work though. We need a live one day friend.
@Sloxx701
2 жыл бұрын
If the board has a lot of thermal mass from multiple layers of internal power and ground planes, use SRA / low melt solder to remove through hole components. They will literally fall out of the board very quickly using much less heat. I have to do this when working on any through hole components on modern computer motherboards, Xbox's , PS4s/PS5s, etc. The boards are just too thick and will suck up heat like a sponge, even with a powerful iron you will be there forever.
@pgmurray76
2 жыл бұрын
Exactly. I put a heat gun on low temp 5 inches away to evenly heat the board and lovely Pb lead solder to reduce the melting point. Flux is always helpful. RoHs THIS!
@jessemessy3864
2 жыл бұрын
Love your videos! Lots of info every time!
@tomasexteriors
2 жыл бұрын
Been missing your Vids my man ❤️ Work was busy just was no time 💎 but enjoying it again 💎🥂
@mikehonda7934
2 жыл бұрын
JL is such a cool company. They are the only ones to this day that I know of that do their rated power, no matter what from 14.4 down to 11.5 at 1.5-4ohms. (Did the test in my car myself. Of course, I don’t do that daily. I usually don’t drop below 12.3 on my setup. I’ll do a walk around of my setup one day on my channel.) Which means, even on a stock electrical, it will do its power as efficient as a 3-5k with all the upgrades necessary to keep your current up, and voltage up. This is why I run JL in my car. Expensive, but I guess the cost of all of the alternator, runs of 0 ga, and batteries I would need to have, just to have the same output from a 3-5k, balances itself out. And, I can move them from car to car without having to buy all the listed above, just to have a 3-5k amp run safe and not stress the power supply of other amps. Those with Perry’s guide knows, that the 1000/1v1 amps have a potential of 300 plus peak to peak rail. Be careful with those JL amps. They are more powerful then you think.
@coolstreetman
2 жыл бұрын
There are a bunch that do their rated power now that SMD amp dyno exists. There are channels that do amp dyno runs and alot do more than rated. But the ones that do are specific. Look at the channel Williston Audio Labs. Im sure you will enjoy
@mikehonda7934
2 жыл бұрын
@@coolstreetman thanks for the referral, but I know of all of the channels that do amp dynos. I’ve seen the 1st run of the dyno setups on Tony D’Amore channel, (designer and founder of the SMD dyno and tools) over 10 years ago. As for the amps doing their rated power, yes I know some of them do. Thing is, they require a lot of voltage at higher ohm loads. In other words, a 1200w at 4ohm amp, which most likely will be around 4500w amp at 1ohm or more depending on the components and amp design and type. Most wire their amps at low ohm loads. Which in return, require a high current to do rated power, where as JL doesn’t matter from a 1.5-4ohm load because it has a regulated power supply that controls the current which keeps the the power balanced across the ohm loads listed. Example, if I wire a 4 ohm sub to a JL amp (R.I.P.S. Line of amps Slash and HD amps) , it does it’s peak power 1,000/1,200w. If I wire a 1.5ohm sub, or a 2 ohm, or 3 ohm, it will do its peak power from 14.4-12.4v safely. If you get a 4,000w amp that is 4,000 at 1 ohm, if you wire it to 4 ohms, most you will see is 1,000w or a little bit over or less at 14.4 and when the voltage drops, so does your wattage. Downwards of 600-800w depending on your current and voltage. You won’t see 4,000 watts at 4 ohms. That’s the difference.
@bigassfordsd
2 жыл бұрын
@@mikehonda7934 The rockford power bdcp series amps are similar, the don't do quite as much at 4 ohm though.
@mikehonda7934
2 жыл бұрын
@@bigassfordsd yup. Similar, but still, not the same. Also, the BDCP amp requires way more current then the JL amps do to do it’s rated power.
@coolstreetman
2 жыл бұрын
You are moving the goalposts. The other amps still do their rated power at whatever ohm load. It literally says in the amps advertising what the different ohm load rated power. 8,4,2,1. I'm an electrical engineer there is nothing special about how JL makes their amps. You are just a fan boy trying to sound smart. You think JL has some secret sauce on voltage stabilization? You really don't know what you are talking about. You are probably someone that thinks that apple products are inherently better because they cost a ton of money. There is no patent for circuit board designs so the JLs aren't special because even them are copying someone else's designs. Now if you want to talk about the build quality of JLs Subwoofers we can have a conversation because they make high quality subs.
@NeedHelpChristchurch
2 жыл бұрын
Like this format good info thanks
@craigedgar2828
2 жыл бұрын
Oh, and great work on the thumbnail 👍 I'd hazard a guess that your views from non-subs are up on the last few videos...?
@barevids
2 жыл бұрын
yeah crazy how clickbait works right.. now all i need is some overused meme/youtuber sound effects and a generic sponsor lol
@craigedgar2828
2 жыл бұрын
@@barevids don't you dare!
@Jamez84
2 жыл бұрын
Taramps HD and MD are one of the best bang for your buck amps in the market. They come in 1,2, and 4ohm versions and cost from $160-$220. This means you get 13.63 to 18.75 watts for every dollar spent. Sorry IDK what that is in pounds...
@guysgt5003
2 жыл бұрын
Best bang is right! The biggest smoke and sparks. Junk amps unless your filling your car with 6.5” mids
@Jamez84
2 жыл бұрын
@@guysgt5003 Says the guy running boss audio
@Jamez84
2 жыл бұрын
@@guysgt5003 😂I've had one for 2years now, with no issues. Maybe learn how to hook your stuff up right and you won't have those issues. The only people crying about fires with full bridge amps over other amps are idiots. If anything old school class AB amps are 10x more likely to catch fire damn things run twice as hot as any Full Bridge Class D. HALF THE PARTS, HALF THE HEAT, TWICE THE POWER.
@guysgt5003
2 жыл бұрын
@@Jamez84 Soundigital power8800’s two bro
@Jamez84
2 жыл бұрын
@@guysgt5003 😂😂💩💩💩💩💩💩💩💩💩💩🤥🤥🤥🤥🤥💩💩💩
@Bassotronics
2 жыл бұрын
Love his new thumbnails.
@joshholden8561
11 ай бұрын
This is 1 of my favorite kicker amps ever made wite them to .5 half ohm and they do stupid power.
@BH4x0r
2 жыл бұрын
I think you saw no switching because there was no resistance or anything between the BJT's output/gate input and the neg rail, i've seen similar behavior on other circuits i made myself and i was like "why aint it working" till i connected a 100k resistor even lol till it worked at all
@CL-yp1bs
2 жыл бұрын
bro get some chip quik (or generic equivalent) low temp solder... you can then add low temp solder on there, little by little until you have replaced alot of the hard to melt lead free solder with extremely low temp solder.. obviously you do not want to keep the chip quik on there permanently and its damn expensive.. but it works and will keep you from burning up the board.
@dyslectische
2 жыл бұрын
You can easy use real hot iron. Discussie if what is best to do ? Slow hot but long OR fast hot and quick thake IT off. Its Just what you learn your self.
@diabolicalartificer
2 жыл бұрын
Were the dead caps Vishay? And were they X types which are supposed to be self healing and handle voltage spikes. I've never seen a film cap blown and I deal with valve amps with spikes of over 1KV, weird.
@owenanderson2306
2 жыл бұрын
Hey so I have a digital designs m2b and when i turn the gain up the amp makes a thundering bump sound and will continuously make the sound even when playing music but it still sounds like it did before just had a thumping sound but I'm scared it's going to damage my subwoofer do you know what the issue could be?
@nobodytoyou4887
2 жыл бұрын
If my vibe audio Slick A4 4 channel ever kicks the bucket I will have to lookup how to send it to this man, luckily I'm not harsh on my amps so with luck it will keep rocking. (sigh they just don't make them how they used to)
@thomasandrews9355
2 жыл бұрын
I have a Memphis mcx1.1100 and it immediately goes into protect. I checked and found no immediate shorts. Not sure where to begin
@minus3dbintheteens60
2 жыл бұрын
I'm installing a 430 farad cap, with huge amounts of trepidation. Can't imagine what would happen if one of those cells errupts, especially burried inside a game of Tetris behind 6 amps, batteries, wiring etc in the boot
@ds1919ds1919
2 жыл бұрын
Why not just use a deep cell group 31 battery? Batteries replenish power internally, whereas caps need an external source to replenish. Ideally, one would want to have a huge capacitor bank using rail voltage. A external bank can kill someone, but that's where you'll get big reserves for power etc
@coolstreetman
2 жыл бұрын
My entire bank in my competition bass vehicle is caps.
@minus3dbintheteens60
2 жыл бұрын
I've got an Optima D27M in the rear, and while the battery is good quality and apparently very low internal resistance, it is 10 years old with 66% of its original CCA rating. The cap is to help with vdroop, especially because I only have a stock 100A alt and I haven't yet even gotten around to modding the sense wire on it so it will actually stay mid 14s when I want it to.
@The_English_Miner
9 ай бұрын
Ive got an amp, that has a CLIP LED, That is always lit, when amp is powered on.... Amp READY green light, lights up as it should, But from the second i power it on, The CLIP light is dimly lit... Not lit brightly, Just dim..... and i have 7.7vDC at output terminal of that channel.... Other channel is function perfectly.. No DC offset at terminal.. CLIP light isnt lit etc... Any idea where to start? There are clearly no dead shorts, As amp powers up, Protection relays click and amp channel LED's go to READY.... Thanks
@Jamez84
2 жыл бұрын
Another JL missing its power connector.... smh
@curtchase3730
2 жыл бұрын
You know your stuff! Wow! My question is: Take an amp that uses a DC/DC switching power supply, ok? Will the power output vary with the input voltage, or can the power supply compensate for the voltage change and still output rated power? Say range from 11.5-15 volts. Thanks
@barevids
2 жыл бұрын
Hey Curt! Typically, with SPS in car amps, power supply PWM duty cycle is fixed, so as the input voltage changes it directly affects the rail voltage generated at the rectifiers on the secondary, which will change the clip point of the amplifier so yes it directly affects power output. Quite a few amps have regulated power supplies that vary the duty cycle of the power supply mosfets, which can keep the rail voltage at a fixed level. Its essentially sandbagging at higher voltages to stay within power and voltage design limits of the output section.
@WILLSHIP916
2 жыл бұрын
Sam the man. Why does it seem as if my HD3000 1.OHM HIT HARDER THAN MD3000 1.OHM
@drzflyest4
2 жыл бұрын
I have an amp that has a terrible alternator whine but works otherwise. I replaced the amp and the whine went away. Is this something that can be addressed?
@shawnbarnes6097
2 жыл бұрын
Can you repair a X1200M Kenwood eXcelon amp? It simply stopped playing.
@HamiltonMechanical
2 жыл бұрын
okay, so I have a crappy old oscilloscope. I have my amp and sub in my car. I want to set my gain. What am i doing here? do i test it under load? or is it safe to test with the sub disconnected? do I just run say a 30hz test tone or does it matter what frequency? I just don't want to toast anything here haha. Sorry to ask such noob questions but since this amp died from clipping to death seems like an appropriate time to bring it up :) you're the man, sam!
@dyslectische
2 жыл бұрын
kzitem.info/news/bejne/yYeFtoRjpWVygKQ
@orangejjay
2 жыл бұрын
Run a 60hz 0dB tone. Connect one probe to the +, one probe to the -, and hit play. 100 Hz will be good for full range. There's PLENTY of guides and videos online that you can find. A simple search will provide you with a wealth of info.
@HS786UK93
2 жыл бұрын
Are the Rockford BDCP amplifiers full bridge?
@digginglow
2 жыл бұрын
I have the same question can find it out online
@markroberts715
Жыл бұрын
Awesome vid bro!! Hey,I've got a jp33,and 4 10s in a vented box tuned to 32hz,the bass is fn great,but the amp is clipping and smidgen but sound awesome, not obvious indication of clipping other than the clip light, is it bad for the subs?
@barevids
Жыл бұрын
No it's not, but if your voltage is steady, I would suggest upgrading the amp for something 1.5x more powerful ☺
@markroberts715
Жыл бұрын
@@barevids ok,thanks bud
@Neovo.Geesink
2 жыл бұрын
@ 08:39 Do I see that correctly or not? It looks to me that the cores of the two output inductors are slightly different... one looks more rounded and thinner... Can this have an effect too on the filtering of the Class D Switching?
@davewesternky
2 жыл бұрын
Wonder how many people caught your tip? lol! mums the word ;| My Stetsom is pounding.
@axel31video
2 жыл бұрын
I have an alpine pdx-v9. If I put the volume at the point that distortion can be heard, it goes to protection. I did the same test at home, with the same result. Only occurs with high volume.¿Do You think that amplifier has a clipping protection?
@leung619
2 жыл бұрын
Sam, I have 3 amplifiers, stetsom 800.4, timpano 3000.1 and a taramps md8000, also an expert DSP, when I turn on the remote switch there's a very loud popping sound, please give me your expert opinion on this 🇬🇾
@basshead30
2 жыл бұрын
👍👀👍
@Icemancomp25
2 жыл бұрын
So question, if the board say looked like it caught fire and looks burnt is the board junk?
@barevids
2 жыл бұрын
No, almost always repairable
@Icemancomp25
2 жыл бұрын
@@barevids so I checked and the underside of the board is a little toasty at the outputs. Burnt into the board a little. Would it be worth it to spend the money on fixing a MTX thunder elite 1501D? If seen it on a bench crank out 2200rms.
@senzothebusheletronics8913
2 жыл бұрын
Man i need TC6391AN for my amp cant find it in my country any modification you can suggest amp is pioneer A307R
@4runnin1
2 жыл бұрын
i need a repair how do i go about the order its a Shark 3500.1 thanks
@Jamez84
2 жыл бұрын
Shark? That's a brand I've never heard of.
@TimothyStone-sg4lq
Ай бұрын
Why is my clip light on and no sound it want go off
@TimothyStone-sg4lq
Ай бұрын
Its a audio pipe 1500.1
@nickrogers6593
2 жыл бұрын
My amp is flashing when I hook it up idk why it’s doing that
@barevids
2 жыл бұрын
Output section fault
@woldemortxyz7996
2 жыл бұрын
How easily will clipping cause death of caps? I was wondering with my SD8K 2Ohm evo2.1, can I set the gain to 126V at -5dB and have it clip at peaks, while obviously watching that voltage won't go under 12V? I only have a 160A alt, 6x40Ah AGMs but also 2000F of supercap banks. Re of the sub is 1.4Ohms, Imp rise at Fc should be 2.5Ohm and at 100Hz, 1.7Ohm. I have in the past come to the conclusion that -5dB sets a good volume level with not too much clipping at full volume, but the SD is a lot more powerful and sensitive than my earlier Korean amps. Also, while I set the gain, the fan comes on right with the clipping light. Does it also come on with temperature or just clipping?
@barevids
2 жыл бұрын
if the amp is clipping on the "kick" or impulse of the bass note only, and NOT on the tone/sine of the bass notes, then your LPF is TOO HIGH. For Brazilian amps, all of the knobs on the side should be at minimum, other than the gain. Then, an additional LPF should be set on the head unit or processor to around 55hz. You dont want a flashing clip light on the kicks, so if you do, reduce LPF until clipping comes on equally for kicks and tones throughout the track.
@woldemortxyz7996
2 жыл бұрын
@@barevids I use a Helix DSP.2, where I can set all kinds of filters and slopes. I think I had the HPF at min and LPF at like 100-200hz on the SD and 100hz 12dB crossover on the DSP. Not at full power yet, just testing. Are you saying I should have a 12dB/oct filter from around 55hz and 24dB up from 80hz? I usually set the gains with a 50Hz .wav sine wave file. That would make the bass sound even less flat, It's a custom sundown nsv3 18 in a trunk wall tuned to 25Hz. The lows with that kind of filters would be overwhelmingly overpowering compared to the mids? I do have 12s with 500W each in the doors, but they can't keep up from 55hz that well. Or do Brazilian amps have such a roll off at the lows, that they don't get the same voltage than kicks? If so, what would be the best way to ensure constant voltage over the entire pass-band?
@andrewg7344
2 жыл бұрын
Are banda viking 15k any good thinking about buying one for my dd 18s
@barevids
2 жыл бұрын
Yeah man but better is the powerus pw15000
@andrewg7344
2 жыл бұрын
@@barevids sweet thank you appreciate you 👍🔊
@ClerikerNr1
2 жыл бұрын
hi, are you interested in to check and fix an Zapco C2K 9.0xd
@barevids
2 жыл бұрын
If you're in the UK, sure!
@ClerikerNr1
2 жыл бұрын
@@barevids im from Germany, but i would send it to you of course
@barevids
2 жыл бұрын
Import tax and duty both ways will make it not worth it 😔
@ClerikerNr1
2 жыл бұрын
@@barevids let me think about it to find a solution
@ronaldomaynard4816
2 жыл бұрын
Can I run a soundigital 8000.1 evo 4 1 ohm amp at 0.5 ohm
@barevids
2 жыл бұрын
No
@ronaldomaynard4816
2 жыл бұрын
@@barevids thanks for the reply. My friend's has 6 massive gtx 10s playing at 0.5 ohms. I know how box rase works but am not quite comfortable doing the same
@barevids
2 жыл бұрын
@@ronaldomaynard4816 I always reply no to these questions when I know nothing about the rest of the build. All amps can play fine into 0.5, if the rest of the build is suited to it.
@ronaldomaynard4816
2 жыл бұрын
@@barevids it should be fine because I have the current. 4 banks of lishen chargeing it 15.6v
@barevids
2 жыл бұрын
That makes it worse. You want to LIMIT the amount of power through the board. It would be better run on 10v not 15.6v. People think strong power supply means it will be better at low impedance. Strong yes, high voltage no. Maintain 10v no clipping most amps are good for 0.5ohm. 15.6v means so much more power can pass through the board before clipping it will overload the components even if its clean.
@jasonme3557
2 жыл бұрын
So who makes the best amp. I am sure you get asked a lot. I run a Mosconi.
@barevids
2 жыл бұрын
For what application? Theres no single answer. A bit like whats the best car. For drag? Track? Comfort? Fuel economy? etc.
@jasonme3557
2 жыл бұрын
@@barevids Well the Mosconi I have is for sound quality and it sounds great. Expansive but it works. In my question best being a good sound with reliability to match. New to you channel, I like what you're doing. Good stuff.
@Jamez84
2 жыл бұрын
@@jasonme3557 Boss audio lol... 😂😂😂
@jasonme3557
2 жыл бұрын
@@Jamez84 You know it.
@1280spoon
2 жыл бұрын
Sam can you send me your email address I have a question for you about a amplifier
Пікірлер: 105