Replacing the clutch on the E93 M3 project car. The car has 210k miles on it, and this is its second clutch change. This is the first time I have replaced a clutch.
Removing the transmission was the most difficult part. You have to tilt the engine using an engine support bar, and get the angle on the transmission just right to be able to pull it out.
I split the project up over 4 days, averaging maybe 6 hours a day. It's a reasonable job to do as a diy. It would be much easier if you had a lift.
Tools:
Engine Support Bar - amzn.to/3xERG28
Transmission Jack - amzn.to/3W9TWZw
Torx Bit and Socket Set - amzn.to/3Qb4nZ3
Sockets Set - amzn.to/4aKvFxJ
Extendable Ratchet - amzn.to/3U7wPMz
Gloves - amzn.to/3UbZ7FN
Pick Set - amzn.to/446q3LD
Milwaukee 3/8” Impact - amzn.to/49H7LSt
Milwaukee 1/2” Mid-Torque Impact - amzn.to/49MHXnX
Milwaukee 1/2” High Torque Impact - amzn.to/3JtNNQd
Clutch:
www.rockauto.com/en/moreinfo....
Useful Links:
www.m3post.com/forums/showthr...
Негізгі бет Автокөліктер мен көлік құралдары Clutch Replacement on the E93 M3 Project Car
Пікірлер: 19