Thank you Rene very informative! It worked perfect as you said it would, looking forward to many fills.
@m1serfreed477
2 жыл бұрын
I don't waste anything bro, I will use up what I managed to get in the bottle and start again. Also, why did you not use the purge lever to empty the system at the end, that's what its for
@jeffgaydash
7 жыл бұрын
Thanks, I received one of these new units and couldn't figure out why I couldn't turn the knurled knob. Can you still de-gas using the outer lever or will it begin to empty the sodastream tank? If not, what is the reason for keeping the de-gassing lever on the unit? Does it serve any purpose?
@trinitysupplyinc3892
5 жыл бұрын
you can replace the fill adapter with adjustable knob
@sweetbabygurl34w68
6 жыл бұрын
How do you know when your tank needs replacing or refilled?
@trinitysupplyinc3892
5 жыл бұрын
Your problem is your source tank, is not a siphon tank. your large co2 tank needs a siphon tube inside.
@bytemaster67
7 жыл бұрын
I need that red o-ring. I can hear gas leaking thru the tiny pinhole. Where can I get it. What is it called ? Is there a measurement so I could get it at Home Depot
@trinitysupplyinc3892
5 жыл бұрын
you can get the orings here: www.trinitysupply.com/CO2-soda-maker-refill-station-o-ring-p/1050.htm
@the1brushup
6 жыл бұрын
I purchase this unit and have success in filling only once. I follow the instructions. I purge excess gas to chill the tank. I then let the gas in until i hear it begin to fill and leave it fill for 10 plus minutes. Walla, only a small amount of gas has filled. I have repeated this many times with the same result. What am I doing wong?
@JasonAtNovaleaf
6 жыл бұрын
this guy (in the video) doesn't know what he's doing. you need to invert the bulk co2 tank so that liquid co2 flows into the sodastream bottle. not inverting just puts gas at 600psi into your tank, not filling it at all.
@JasonAtNovaleaf
6 жыл бұрын
also unless you like cancer, only use food grade co2 canisters.
@ash_au
6 жыл бұрын
There are two types of co2 supply tanks, siphon tanks, and standard beverage tanks. Siphon tanks suck the liquid from the bottom of the co2 tank, they don't need to be inverted. Standard tanks do. I think we can assume the presenter is using a siphon tank.
@sukahusky2464
6 жыл бұрын
If you guys noticed there's a red band at the top of his CO2 tank. This is an indication that there is a dip tube inside the CO2 tank. You can request from your industrial gas supplier a CO2 tank with a dip tube in it or without. The cost is no difference typically. With a dip tube the CO2 tank will put liquid CO2 out of the valve in the upright position. Without a dip tube you would have to invert the tank to get any liquid out. This is not recommended as it can be very dangerous. He didn't go over the fact that you was using a dip tube tank and this can be confusing for some of you.
@JasonAtNovaleaf
6 жыл бұрын
edit: @minton informed me I'm wrongish, he has a dip tube. see minton's comment in this thread.
@jeffbmtb6993
6 жыл бұрын
i purchased a co2 adapter from you guys. as i was screwing it in into the pb tank co2 was leaking. any fix for that or is it a defective adapter? need help tnx.
@trinitysupplyinc3892
5 жыл бұрын
you can buy a replacement fill adapter from us.
@A785R
6 жыл бұрын
How many Sodastream fills can you get from a 20L Co2 tank?
@dartnuss
6 жыл бұрын
Andrew Bell about 40-45
@A785R
6 жыл бұрын
Thanks - I just placed an order with you via Amazon. :)
@trinitysupplyinc3892
5 жыл бұрын
20 lb tank should provide about 12 refills
@xlandscaper
6 жыл бұрын
There looks like there are a few different ones on amazon, some with reviews and some without. Which one should I get?
@xlandscaper
6 жыл бұрын
And now I’m not buying one. Price increase of 10$ overnight after my comment. No thanks
@trinitysupplyinc3892
5 жыл бұрын
kzitem.info/news/bejne/kp572X-ArX-hrIY
@MobileDecay
5 жыл бұрын
I did this and it exploded and killed me. I'm gonna sue. 😡😡😡
Пікірлер: 25