Nice to hear Jenny in her new role! Needed this video too as I'm about to buy some! Thanks guys
@1701_FyldeFlyer
2 жыл бұрын
Thanks for this Jen! I was confused what the difference between them was, now I know!
@dccconceptsyoutube6446
2 жыл бұрын
You're welcome!
@allanpeoples7410
3 ай бұрын
I recently bought four of these and found them to be very noisy. Checking the posts of others on various sites, it turns out that this is/was a fairly common problem. You can quite easily open the machine by undoing the four screws. In the process, you'll have to slice through the labels. I didn't have any grease available to me, so I put very small drops of locomotive lubricating oil on each of the gear wheels and also on the places in the moulding that fit over their axles. I then re-assembled the machine and the noise was reduced, but not nearly completely. I then made them switch back and forth a number of times. It seemed that after sitting for a while the machine operated with less noise. I also tightened the housing screws, as they had originally been, but backed off a quarter turn. I don't know which of these was the most important, but the machine is now operating as quietly as the Tortoise machines which I also have in use. I'm going to repeat this process on the other machines. In the one that I have opened, there was some white grease on the wheels, but not much.
Пікірлер: 4