Thanks for your comment 👍. I am glad you find my video tutorials useful 😊
@user-cx9jt2ej9x
11 ай бұрын
Thank you for posting a good video. Thanks to you, I learn a lot
@TohidAlizadeh
11 ай бұрын
My pleasure! Thanks for your comment 👍
@leejinhong2977
11 ай бұрын
Hi Mr Tohid, Thanks for the information they are so useful. I am facing one problem at the moment. Can you do some sort of tutorials to teach us how to manage multiple PLCs at one time ? And implement the data resource manager instead of MODBUS for the communication between them. I am using 3 PFC200 WAGO and 1 WAGO Touch Panel 600 at the moment. However, the screen can't mirror the information from the PLC which I am trying to use the data resource management. I will appreciate so much if you can help us out with this.
@TohidAlizadeh
11 ай бұрын
Hi, thanks for your comment and suggestion. I am considering to use multiple PLCs and demonstrate how to share data among them. It will take some time though to do it and publish the video tutorial. Stay tuned!
@leejinhong2977
11 ай бұрын
Thank you very much !@@TohidAlizadeh
@tomas111video
11 ай бұрын
What are the challenges of managing multiple PLCs? You have a bus and devices. Who is your online master? Panel or PLC? What is the operating logic of the PLC and the panel? Do you know all this?
@iran_siemens
Жыл бұрын
🌷
@TohidAlizadeh
Жыл бұрын
👍
@stefanAH97
11 ай бұрын
Thank u very nuch for the useful session. How or where to add user/pw to the target device?
@TohidAlizadeh
10 ай бұрын
Hi, thanks for your comment. To encrypt data and exchange it with the client safely,, you would need to create a certificate which would require installing CODESYS Security Agent add-on. I may demonstrate this in another short video later.
@ricardosolanofadul2541
4 ай бұрын
Mr. Alizadeh, help me a lot, thank you very much
@amywilliams1021
7 ай бұрын
Very clear, thank you!
@TohidAlizadeh
7 ай бұрын
Thanks for your comment 👍
@kaizokudc
8 ай бұрын
Hello, thank you very much for the video. It is very helpful. I got a question. How can we configure codesys plc as an opc ua client? Is there a resource for this?
@TohidAlizadeh
7 ай бұрын
Thanks. There is one example in CODESYS store to use CODESYS as the OPC UA client. Though I have not checked it myself.
@abdodabour4306
11 ай бұрын
2:53 Hi .. i got this message ( The selected target system 'CODESYS Control Win V3' is different from the connected device 'CODESYS Control Win V3 x64'. ID mismatch: Selected=0000 0001, Online-0000 0004 ) Also i don't know what user name and password i should enter at 2:48
@TohidAlizadeh
11 ай бұрын
Hi, thanks for your comment. It seems that the device that you are using in your project is different than the virtual PLC running. Try to update your device in the project and make it the same as the virtual PLC. There is a way to remove the username and password and setup new ones. This is done by deleting some files on your PC. You can look it up ( I may also make a video explaining this soon). I hope this helps.
@abdodabour4306
11 ай бұрын
@@TohidAlizadeh i solved this problem .. thanks .. i have other questions and i need help .. can i mail you ?
@abdodabour4306
11 ай бұрын
@@TohidAlizadeh i solved this problem .. thanks .. i have other questions and i need help .. can i mail you ?
@manasavamshidhar2607
6 ай бұрын
Hello sir, thank you for sharing this video. In my application , i want to send acsii data (string) from raspberry pi to a scada software. Maybe with opc ua and codesys as common platforms. Is it possible? And to include raspberry pi as upc server what should be done?
@TohidAlizadeh
6 ай бұрын
Thanks for your comment. Yes, I think it is possible. You can use CODESYS runtime for your Raspberry Pi, then use your Raspberry Pi as an OPC UA server, like what I did here, and then read the data using an OPC UA client on the other end. I hope this helps. Let us know if you succeed in doing it.
@lildavide221
5 ай бұрын
Hello my friend, great video! I have a little question. How can I apply the values in CoDeSys, to change them ( OPC UA-Server)?
@TohidAlizadeh
5 ай бұрын
Hi, thanks for your comment. I didn't understand your question fully, but if you mean that how to change the values f the variables on the CODESYS side, while the project is running, you can do it through visualization or by forcing values to the variables.
@tomas111video
11 ай бұрын
Thanks for the video, but I would be interested in how to create an OPC server with a password? This is a more difficult task.
@TohidAlizadeh
10 ай бұрын
Hi, thanks for your comment. For this, you would need to create a certificate which would require installing CODESYS Security Agent add-on. I may demonstrate this in another short video later.
@Time4yes
Жыл бұрын
Is the port number always 4840?
@TohidAlizadeh
11 ай бұрын
This is the default value, so it may be changed if you change the settings of the PLC.
@Time4yes
11 ай бұрын
@@TohidAlizadeh Alright, thanks
@TohidAlizadeh
11 ай бұрын
You are welcome 🤗
@levih.2158
2 күн бұрын
Is there a way to restart the OPC UA server without restarting the PLC? I am moving certificates from my PC directly into the trusted folder in the linux file system, and the certificates work - but only after a PLC reboot.
@darshans7056
Ай бұрын
thank you so much..but one question..do we have to install opc ua server before doing the connection with ua expert..if so , is it not available for free. I'm not getting connected once i type the url and my server is not showing in the add server box
@user-kv2cl5xl5s
3 ай бұрын
What software u use for editing opc?
@rodrigueroland
7 ай бұрын
I've got this error: Used UserTokenType: Anonymous The server returned no certificate, all certificate checks will be skipped. Error 'BadIdentityTokenInvalid' was returned during ActivateSession Connection status of server 'OPCUAServer@PCNAME' changed to 'Disconnected'.
@TohidAlizadeh
7 ай бұрын
What version of CODESYS do you use?
@rodrigueroland
6 ай бұрын
@@TohidAlizadeh I installed the last version: 3.5 SP19 Patch 6+ (64-bit). I don't know really know what it's wrong.
@jaceksieradzki1505
6 ай бұрын
@@rodrigueroland I also struggled with this. Solution is very simple - go to Communication Settings -> drop down menu: Device -> Change Runtime Security Policy... -> tick the Allow anonymous login box. Works fine for me. Thank you @TohidAlizadeh for great video.
Пікірлер: 47