We actually had our first dusting of snow on the local mountains here about a week ago (usually don't see that until December). Electric heated gloves are a beautiful thing for when operating the boom during colder months.
@fronabargerconveyingpumping
10 ай бұрын
I may have to look into those heated gloves, that would be pretty nice.
@MuddyfeetConcretePumping
10 ай бұрын
We had a holding valve on the front driver side outrigger bleeding off not to long ago. Pretty easy fix. Concord had us a new one in know time.
@bradleym.2008
10 ай бұрын
It seems like your using that lay flat tip even on flat work now, have you gotten completely off the traditional tip hose… and how do you clean it?
@fronabargerconveyingpumping
10 ай бұрын
We do still use the standard 4" hoses, usually use the lay flats to help with splatter. They are definitely smoother to run, however they won't last near as long as the regular 4" flex hose. Mudsnake discontinued their hoses, we now buy a maroon hose that is called the "Viper". It's a 4" that is very rigid but also holds a stream very well.
@MuddyfeetConcretePumping
10 ай бұрын
Is that rebar welded across your grate?
@fronabargerconveyingpumping
10 ай бұрын
I have flat bars actually welded in the grate. I believe they are spaced at 3.75", I left the top open a bit for drier mud also. I love it, no clattering of a grate that lays over the factory and very seldom does it plug because of chunks.
@canadianconcretepumper1979
10 ай бұрын
@@fronabargerconveyingpumping we have a few that are welded and some which are just separate, secondary screens. The separate units rattle like crazy (as you mentioned). The only real advantage is that if your vibrator croaks our you're pouring a heavy fiber mix, the secondary screen can just be removed. Overall, I most definitely prefer the welded on bars, like what you have.
Пікірлер: 8