I too once was young and obsessed with going faster. 😊
@jadenknight9876
3 ай бұрын
Hey I’d love to see one electric
@michaelb.42112
7 ай бұрын
If you only had a time machine to 1982, then I'd be the happiest player on the planet.
@wesleyammon8425
Жыл бұрын
Would definitely suggest 18lb springs and an intake on it( air filter adapter, air filter, and .038 jet) Would definitely wake it up but be careful, as you found out on the last engine, high rpms will kill stock parts. They don't like rpms above 5000 or so. And a governor delete (also free mod) works a little better than just zip tying it. Nice mini bike.
@schultzsgarage9887
Жыл бұрын
Yeah I definitely want to upgrade some parts to avoid that 😂
@floridaboy4243
Жыл бұрын
Aluminum fly wheel VM 26 Mikuni carburetor jet it 36 pound valve springs and a cam a aluminum rod and take the governor out completely and a 48 sprocket take the front fender off because wind get under there and slow you down and you good 10 tooth clutch in the front 48 sprocket in the back
@migoabu3928
Жыл бұрын
@@floridaboy4243will this setup wrk with the bt200x ?
@twiztid83222
8 ай бұрын
Helmet helmet helmet. This is no different than a motorcycle and you can end up dead in a second
@baylordarnell6132
4 ай бұрын
You killed the torque on the bike with taking the jack shaft out. Mines does 45mph off road on trails!!! Jetted carb,intake,exhaust 18lb valve springs an aluminum fly wheel
@mrbrucie22
4 ай бұрын
Agreed. Jack shafts are not bad. They actually allow for better gearing options.
@GrantFrandsen
4 ай бұрын
What carb and flywheel did you buy? I’m looking for some
@larry_to_goated7716
Ай бұрын
@@GrantFrandsenget a vm 22 or pz carb and a cheap aluminum 10k rpm flywheel works great and I would get a billet rod to
@Nugz_2008
10 күн бұрын
@@GrantFrandsenI have a nibbi pe22 on mine with the nibbi air filter and it got mine from 19mph to 36 I highly recommend it
@fish_R_stinky69
Жыл бұрын
A torque converter would let you wheelie it.
@josepadilla2159
5 ай бұрын
Thank you bro I recommend I was at 26 mph now I hit 50mph 🎉
@jtbassgambler2594
Жыл бұрын
You meant it feels like going 50mph lol
@jamieclark6338
4 ай бұрын
no they go over 50 mph with the jackshaft delete. you can hear that they didn't even get close to reving it all the way out to top speed. it needs a 60 tooth rear sprocket to not be stoopid laggy on the low end like this is.
@prostreetgsxr
Жыл бұрын
It’s not running 50 and if it is it is taking waaaay to long to get there 😂
@franklin7545
Жыл бұрын
Facts it’s about maybe 30 he has an original clutch on it. It’s basically stock besides the exhaust. I have an torque converter installed with a stage 3 carb and header and mine hits 60+ I also have tooken apart the governer and changed the gearing. There’s no way he’s going 50 on free mods. I’m sorry boss but nah
@mcnuggatron2129
Жыл бұрын
@@franklin7545 The torque converter doesn't add much top end. Straight chain adds much, much more than a torque converter. Source: I have a coleman with a predator 224 and a torque converter, and another with a 224 and straight chain. Torque converter tops out around 30, straight chain was still accelerating at 40. Thats with the governor. Edit: Might I add though that the torque converter will pop power wheelies like its nothing and gets to 30 mph in like 5 seconds, but the other one feels like a person it slowly pushing you up to speed lmao
@mikesbarn1858
Жыл бұрын
I did heavy mods on mine for about 61 mph. I really advise building a springer seat for off road.
@lisafulmer8530
Жыл бұрын
It not going 50 mph 😂😂😂 mine does 65 with gearing change header, 26 lb spring gov delete, jetted carb go 17/72 gearing and it fast off the line
@MRoh79
Жыл бұрын
Option 500ccm kit. All set
@troyholland3436
Жыл бұрын
That back tire is getting rough.
@nwsights6301
Жыл бұрын
Dang that's quick looks like a lot of fun o need to get one of these.
@racerothery2716
11 ай бұрын
Dope shit bro! I’m building one like that right now. It’s called the mudstar200 and it’s gettin ALL THAT UPGRADE SHIT! 💪🏻 putting a Hemi 212 with stage 2 block and stage 3 head. I know it sounds mismatched but that’s how it works
@schultzsgarage9887
11 ай бұрын
Nice, I bet that thing will scoot!!
@racerothery2716
11 ай бұрын
Yeah I last minute decided to not buy another engine and just put all that money into the 196 it comes with. Same set up same dealers for the parts just using non Hemi 196/212 parts. My kid has mega Moto 105cc that I’ll put this beef cake 196 into later when she gets good on it and then I’ll build something else for my bike
@SirPuffAlot0420
13 күн бұрын
considering they aren’t meant for adults and have a weight limit of 200 pounds, 45/50 mph isn’t bad for a little mini bike
@larryguevara3350
7 ай бұрын
Great for street only no hills or trails. And takes long time to get to speed .you'll go threw clutches quickly. If that's what you want.cool
@SpAcEcruizer203
Жыл бұрын
Love it bud
@stanlee45444
2 ай бұрын
Can you show a video of you removing the jack shaft
@jessiebaker4539
Ай бұрын
Just flip the clutch and add longer chain?
@AJC-jo3ds
10 ай бұрын
Your master link is on backwards, curved part goes towards direction of chain…
@roygumpel8415
8 ай бұрын
55 on a wildly unstable machine without a helmet is just plain dumb. it really is just as fun with a helmet. more maybe.
@michaelwaters-h20
Жыл бұрын
No way that’s 50 mph nice try though. Maybe 30 and you pretty much got to walk it to get a running start. Straight chain sucks. Try the torque converter and then talk. ✌🏼
@draimen3371
Жыл бұрын
lol torque converter is worse, go through belts and your wallet and your not gonna get past 50. a stock coleman with just a gov delete does 35 aint no way this is "maybe 30".
@Deucealive75
7 ай бұрын
@@draimen3371 🤣🤣
@IAmBattlestrong
Ай бұрын
Mine goes 50+ I believe him you can easily make these go faster 🦾 I just got chased by a pitbull last night and he didn’t even come close😅 well at first but after a good 20 yards he was done for
@IBEW44
Жыл бұрын
Run down big hill to get close to 35 mph. 😅
@prestongriffin416
Жыл бұрын
get your dame helmet on
@user-js6nd8ty1e
6 ай бұрын
Mine does 32 just cruising nothing but zip tie and throttle stop screw it’s an axis m200 tho
@MRoh79
Жыл бұрын
👈😎👉 *Skyteam* _T-Rex_
@jessiebaker4539
Жыл бұрын
Where to get the longer chain?
@schultzsgarage9887
Жыл бұрын
Tractor supply
@the_little_kimsah
Ай бұрын
Tutorial?
@rutzsmith
Жыл бұрын
Please wear helmets.
@mr.liggins9092
7 ай бұрын
These easily hit 50 mph stock. Just straight chain.
@schultzsgarage9887
7 ай бұрын
Ik it’s actually nuts
@jamieclark6338
4 ай бұрын
60 if you have a long enough straight to get it there. 60t rear sprocket still does 60mph but a lot faster
@MOAONAABE
Жыл бұрын
whats a ratchet~ about a half a ounce
@dontmatter2110
Жыл бұрын
Put a GX390 on that sucker
@jessicaestes9960
Жыл бұрын
do not straight chain these bikes yes they will go 40 to 50 doing this but takes two to three miles to get there and has zero bottom end you can get 60 to 70 out of these but not this way
@Thegrimsleeprs
Жыл бұрын
How pls explain
@adamledbetter9815
9 ай бұрын
Lol i hit 67 with straight chain you dont k ow what ur talking about
@UndefeatedAl
8 ай бұрын
@@adamledbetter9815with just a straight chain ?
@carlosgaona2987
4 ай бұрын
Is it normal for the zip tie to make the throttle stiff
@RandomRummageandGames
2 ай бұрын
yes
@floridaboy4243
6 ай бұрын
Briggs And Stratus 8hp Motor
@floridaboy4243
6 ай бұрын
it will fly
@Mr_kx112
7 ай бұрын
Get a 212 wont regret it
@Ctchnthg
5 ай бұрын
Just install a smaller sproket on the back wheel
@Willy38134
5 ай бұрын
would I need to change anything else if I did that or just the rear sproket?
@Ctchnthg
4 ай бұрын
@@Willy38134 you would have to replace the rear sprocket and knock a few links out of the chain.
@ericholt6674
Жыл бұрын
wtf is the zip tie trick
@jamieclark6338
4 ай бұрын
bypasses the govenor and raises the rpm limit which equals a higher top speed
@parole2015
2 ай бұрын
I'd rather keep stock u couldn't even run from the cops with that take to long to get up to speed even gives fat cops hope to catch someone
@wrongturnarchery2337
Жыл бұрын
No power 😂 destroyed buy clutch
@godssoldier4428
Жыл бұрын
Don't do this to your Mini bikes people! There's way better ways to improve top speed and take off!
Пікірлер: 78