Actually, the 1701-A made it's debut at the end of Star Trek IV, not in Star Trek V. Sorry to see that the ball peg won't fit. It's a nice model.
@klein2042
5 жыл бұрын
The ball peg does fit. You really won’t think that it will but you just need to force it
@truthhurts7742
4 жыл бұрын
I agree with Saab rider...IT DOES FIT. You have to push hard until it snaps in.
@johnbockelie3899
2 жыл бұрын
NCC-1701 2245-2285. NCC-1701-A 2286-2293. NCC-1701 was refit in 2272.
@greattoyreviewer
7 жыл бұрын
the enterprise-a was in the fourth movie. it was at the very end
@TheReviewSpot
7 жыл бұрын
yes at the very end
@StephEWaterstram
4 жыл бұрын
Thanx for the show and tell of The Great -A the down side of this Toy is the Light Leaking on the Nacelles!
@sliver01
7 жыл бұрын
Generally, when buying one of these ships, I'll skip Amazon or ebay and go to the Diamond Select website and buy it there for the regular cost. If they have it that is.
@terrysherman8646
4 жыл бұрын
To this day, it's sold out. I've been looking like crazy and ebay is where I ended up.
@azrielmateria8050
5 жыл бұрын
That one looks amazing. The wrath of khan version is very unrefined paintwise. Deflector looks beautiful.
@DarknessFall
5 жыл бұрын
I'm surprised no one has pointed out that if you hold the button for 3 secs so the lights come on, then release it and press it again before the lights turn off, you get a secret message from Scotty.
@truthhurts7742
4 жыл бұрын
I just got mine, and its bigger than I thought. Really nice piece.
@jeffbenson7278
Жыл бұрын
Watching this now, but the Enterprise-A is first seen at the end of Star Trek IV. Remember? They're all talking about what kind of ship they're gonna get, McCoy bets on a freighter, Sulu says he wants Excelsior, Scotty chides him, then they see the new Enterprise. "My friends, we've come home."
@matthewleto1180
7 жыл бұрын
It was actually introduced at the very end of the voyage home
@Rekreated1
7 жыл бұрын
Nice per usual spot, and diamond select say there is zero problems with their choice of stands, no matter what consumers say, zero quality control. I would love a basic acrylic stand...
@AvengerII
5 жыл бұрын
I have the original Art Asylum release of this (2004?) and the problem I has was that that the ball joint(stand piece) eventually DOES break. It happened with mine. I got a replacement piece direct from Art Asylum but I have NEVER mounted the toy on that stand since. Right now, it's lying on its side in a closet...
@robdcollector2808
5 жыл бұрын
Rekreated1 ...the stands suck!!...the plastic gets brittle with time and break easilyyy
@markpruitt6828
2 жыл бұрын
The original Art Asylum 2003 USS Enterprise NCC-1701-A is still the best.
@toyconnoisseur33
7 жыл бұрын
looks like it is nicely done. great review
@alexkautz5766
5 жыл бұрын
Great review as always! But, as you likely know, it's always better to buy new rather than risk getting something that was slightly abused. You always get what you pay for, my friend. All the best!
@ericgray4325
6 жыл бұрын
I got the wrath of khan version, several years ago. my all time favorite - any spaceship - is the enterprise in wrath of khan and search for spock. best looking movie ship models
@Phrancis5
5 жыл бұрын
The best Trek movie, but I hated that thin yellowish pearlescent plastic, crooked nacelles, floppy stand, and sloppy window paint job. I had to return it. The construction quality of the DS TOS Enterprise or Excelsior looks excellent in comparison. Except for the blue impulse lights, this 1701-A version looks pretty decent, but with it had the wrath of khan sounds.
@fidelafi5867
4 жыл бұрын
Wow this is an awesome review i like this .. well done..
@emoryrounds2343
7 жыл бұрын
Diamond Select produces great products. But moreover, they back up their line. I had a (slightly) defective Enterprise B, and while they didn't have a replacement in stock, they did offer a full exchange on an alternate ship. I don't just recommend buying from them, but I plan to do so again on future releases, especially the pending USS Reliant (which I expect will sell out in like a day).
@superhayes256
4 жыл бұрын
Emory Rounds 2 years later and no reliant. 🤬
@Bassistking
2 жыл бұрын
It’s a great replica of the A. It would be nice if they colored the outboard of the nacelles and the impulse engines (I had to color both myself on mine) for sure. There’s also a bonus sound from ST5 with Scotty’s shakedown report holding in the button for a couple seconds, but let go before before the lights come on.
@calvinlweir2795
3 жыл бұрын
It is the ships registry number. National Construction Contract. Or NCC, from what we see on TV....etc.
@nicholasdickens2801
6 жыл бұрын
*11:27* Quality control seems to be an issue for DS these days.
@johnbockelie3899
2 жыл бұрын
If you will notice on ST 5, the impulse engines were white looking instead of red. Different company did the special effects, and I guess goofed. Should be red.
@nicholasdickens2801
2 жыл бұрын
@@johnbockelie3899 I’ll check that again. Yes the effects were rather lacklustre for ST 5.
@johnbockelie3899
2 жыл бұрын
@@nicholasdickens2801 The effects were like they just put the models on long poles an filmed them. I have a picture of the Enterprise A from the movie, and the impulse engines look bright white instead of red.( new engine lenses or something ?)
@robdcollector2808
5 жыл бұрын
..2019 and the only issue Diamond select has not even bothered ever was making better stands. They should have stands that you can easily lay the ship on without a ball joint. The plastic gets brittle with time and break...they suck!!!
@calvinlweir2795
3 жыл бұрын
The ball does fit. You have to just put it in. My model was the same. It is a snug fit. It does not go in all the way, it just clips in.
@garywillig5143
3 ай бұрын
Is there something specific you're supposed to do to get the voice clips? Whenever I press the button I just get the ship sounds like the transporters and the torpedoes, but never a word from Kirk and Spock.
@joshuajanow8033
5 жыл бұрын
The Reviewspot. The Enterprise - A made it's first appearance at the end of Star Trek IV The Voyage Home.
@TheReviewSpot
5 жыл бұрын
yes
@WHR17
4 жыл бұрын
I have the Wrath of Khan version, had to ramrod the ball joint into that socket. Over time the ball joint breaks off the stand. I have gone they two stands now.
@CaptainGeronimo
5 жыл бұрын
Impulse engines don't have as much of bleed trough as wrath of Khan version
@caseymartinez1349
3 жыл бұрын
I find it a little bit easier to attach the display plate to the display base ball joint before screwing the display plate on the Enterprise.
@calvinlweir2795
3 жыл бұрын
It's a docking port. You can see it from Star Trek the Motion Picture.
@MichaelSmith-js5wq
4 жыл бұрын
Don't know if anyone is monitoring this thread or not but I'm hoping some one can answer a question for me. I just recently bought a 2009 DST "Classic" smooth saucer version of the Enterprise NCC-1701 from the Original Series. I love this version and I'm very happy to have gotten it, BUT....The previous owner must have been a smoker because just as soon as I opened the shipping box I could smell smoke and then once I opened the factory sealed box, I noticed a slight discoloration on the saucer. Both top and bottom appear to have as yellowish ring on the surface. Obviously it has to be from the cigarette smoke and must be a tar/nicotine stain. What I'm wondering is, if anyone out there has run into this problem before and if so were you able to clean it off with out damaging the paint job underneath? Does anyone have a good suggestion for what compound to use? I've already done some reading up on the subject but am leery of some of the ideas I've seen on cleaning plastics. Somehow, using a Baking Soda and Vinegar solution doesn't seem right. I think the baking soda might be too abrasive and the vinegar would leave a lingering smell. The idea of using a foaming cleaner is more appealing but I'm just not sure if that is wise either? Any serious suggestions would be welcome.
@mrandrossguy9871
4 жыл бұрын
Hm I have the Kahn STII version and it Does have a bit more detail which is unfortunate that they didn’t keep that detail, Don’t know what they were thinking with the White impulse Engines ? It was Like a light mint Green Color In STV Only Because of Weird Special Effects
@magdalen67
7 жыл бұрын
It is possible to get the ship on the display stand it takes a lot of effort but after the first time it is loosened up and easier to get on
@calhoun24
6 жыл бұрын
Monique Lyon Agreed. I also have this. It helps separating the joint from the base and working it into the socket separately, then adding on the plate to the bottom of the secondary hull, but it does work.
@VIIC71
5 жыл бұрын
@@calhoun24 I used to have this ship when it first was released but ended up breaking the joint from the base and thus I had to leave the ship on its side during display. I just bought a REPLACEMENT but how should I proceed without breaking it AGAIN? I'm scared!
@calhoun24
5 жыл бұрын
@@VIIC71 All I can suggest is work the ball into the socket slowly - don't just jam it in. rotate in the ball like winding a clock or watch. Inserting it straight away will only make things worse. That said, if you don't want to take the chance, and don't mind shelling out a little money, go to Etsy and find a display for a Diamond Select Constitution class.
@CocoKoi321
5 жыл бұрын
really good high quality recently made video review thank you
@TheReviewSpot
5 жыл бұрын
Actually this video is rather old, check out my newer stuff if you'd like
@truthhurts7742
4 жыл бұрын
The ball does fit in the hole...YOU NEED TO PUSH HARD. If you sand it down, you will screw it up. Push hard till it pops in.
@TheReviewSpot
4 жыл бұрын
awesome
@DarthVader-1701
2 жыл бұрын
They actually made an enterprise A back in like 2002 that still seems to be a very good model unlike this newer version of enterprise A. I bought this undiscovered country enterprise when it was new but the build quality was so bad that I had to return it.
@DunestrikeMorgan
2 жыл бұрын
Cool i had that as a child
@adamdavis1737
5 жыл бұрын
I just picked this ship up for $60 Amazon has some of the other models upwards of $100-$200 But nothing close to scary scalper prices I think the wrath of Kahn one and maybe the Excelsipr were the only ones I saw over $200
@StephEWaterstram
4 жыл бұрын
Sorry to read that! The Light leaking on the nacelles are Awful!
@josiahtribble1706
4 жыл бұрын
I just ordered mine from Amazon and thought the price is slightly high, it’s worth it for making the ship a display model and as a Star Trek fan keepsake.
@johnbockelie3899
2 жыл бұрын
The refit had sea green accents. 1701-A had light blue accents. (Strong back ECT. every thing else looks the same.)
@VMIFerrari
4 жыл бұрын
13:06 _"If I was human, I believe my response would be 'go to hell'."_ (Star Trek VI) 13:14 _"Second star to the right, and straight on till morning"._ (Star Trek VI) 13:33 _"My friends, we've come home"._ (Star Trek IV; The Voyage Home) 13:38 _"What's the matter, Jim?" "I miss my old chair"._ (Star Trek V; The Final Frontier) 13:42 _"Engine room - we'll need all the power you can muster, mister"._ (Star Trek V, The Final Frontier) 13:57 _"Let's see what she's got"._ (Star Trek IV; The Voyage Home) 14:05 _"Kirk to Scotty - lower shields"._ (Star Trek V, The Final Frontier) 14:12 _"As captain, I am responsible for the conduct of the crew under my command"._ (Star Trek VI) 14:20 _"Send to commander, Enterprise - We stand ready to assist you. Captain Sulu, USS Excelsior"._ (Star Trek VI) 14:41 _"Where's that damn torpedo"?!?_ (Star Trek VI) 14:43 _"She's ready, Jim! Lock & load"!_ (Star Trek VI) 14:47 _"Fire"!_ (Star Trek VI) 15:00 _"Once again we've saved civilization as we know it"._ (Star Trek VI)
@inlaymansterms...9303
Ай бұрын
Ball joint is on a thread....?
@user-px6gr8xd1v
3 ай бұрын
You do actually see enterprise A at the end of star trek 4
@scripter466
10 ай бұрын
With a little more effort it would certainly have been possible to illuminate the windows. Unfortunately, there is not a single pre-built model in the entire Star Trek modeling world that manages to illuminate the windows reasonably well. A pity.
@klein2042
6 жыл бұрын
I have the wrath of Khan Enterprise and the ball peg does fit. When it's new it's just a serious pain in the ass to get on. Just force it through and it should stay on
@Takeshi357
6 жыл бұрын
I have the first release of this mold and the saucer section impulse engine is indeed red. But man, that is some serious light bleeding there!
@johndayberry8172
6 жыл бұрын
Tetsuron Have you ever tried disassembling the saucer section and other areas where the light bleed is and use tin foil inside as a light blocking agent? I did for most of my diamond select ships and it works perfectly! That is if you can take the ship apart.
@Takeshi357
6 жыл бұрын
That's kinda the thing, I haven't had to. The light bleeding on none of my DST ships is this bad. It just seems like the quality isn't as good on these later releases.
@mathewdempsey16
7 жыл бұрын
Try taking the piece under the cover off, putting the cover on the stand, then out the piece back on while the cover is on the stand. Then put the enterprise on the cover. That's what I had to do with my nx01
@chrischeshire6528
7 жыл бұрын
Mathew Dempsey and use some grease or butter, thats what I did after removing that panel.
@VIIC71
5 жыл бұрын
Someone on here suggested using a blow dryer to heat the bottom piece plastic warm enough to place the base ball piece inside it. Happy to report it worked and ball went in before plastic cooled.
@kaxtorplose
4 ай бұрын
This is why God invented red sharpie markers, for coloring the impulse engine exhaust manifold so it will glow red.
@TheReviewSpot
4 ай бұрын
there you go
@Sarah-Ann1701
4 жыл бұрын
The Enterprise A made its appearence in Star Trek 4 at the end of the movie
@calvinlweir2795
3 жыл бұрын
The impulse engines were always white after the refit. You have to see the movies.
@brainysmurf74
3 ай бұрын
The Lightleak is horrific.
@anselford3753
6 жыл бұрын
I have both starships. I usually dispense with the display stands.
@johndayberry8172
6 жыл бұрын
Ansel Ford I do the same thing. I don't like the stands too much on most of the diamond select ships either so I hang them in my room. I also have other Star Trek ships that I've actually built. I got LEDs plus fiber optics and all the other stuff and I hang those in my room and my Enterprise E you have to see she has blinking navigation lights and all the other stuff you can check all my other stuff I built on my KZitem channel, especially my USS Reliant model. I got all the bells and whistles on it It's on a base and has the Starfleet Chevron symbol and it's got sound effects.
@Afogel0126
6 жыл бұрын
I wish the lights stayed on indefinitely unless switched off and the lights didn’t flash with the sound
@Phrancis5
5 жыл бұрын
Agreed. the flashing lights on all these DS toys is pretty dumb.
@bazzarr
6 жыл бұрын
I would love if it had the phrase "What does God need with a starship?"
@johnbockelie3899
4 жыл бұрын
Actually the flux chillers( silver grilles on the outside of the engine ) are the right color.
@GregsGameRoom
5 жыл бұрын
The paint looks slapped on, there's plastic excess everywhere, and the lights are not correct. I mean, yeah, it's a toy, but I was hoping it would be better quality.
@danclark1348
2 жыл бұрын
3:30 mins on the box, so many of these reviews too long on the box. Too much fast movement of the model to focus, good look at it. Just move it about Alitalia slower, isn't that the reason here, to highlight the features?
@TheReviewSpot
2 жыл бұрын
I completely agree with you Dan, going back and re watching my older videos there's definitely a lot of things I wished I had done different, luckily the newer videos on here, get right to the close up looks and details of the collectibles and I am planning to go back and re look at these ships too along with a couple that I didn't do before like the Enterprise D and D retrofit from All good things, stay tuned for those, could you also please let me know if you're still able to see my newer videos showing up in your subscription feed? let me know?
@danclark1348
2 жыл бұрын
Just being helpful on content. I been a long time fan since 1966. Great interests lies in the product. My boxes I put aside, so anxious to see the ship over the box. To see the amount of accuracy to decide if I want to buy. As I did with Hallmarks treetop Enterprise. The sample was in the open to look over, seen it was satisfactory, then reached for the box to buy one.
@bioshock6935
2 жыл бұрын
Why not just sand paper the ball joint
@TheReviewSpot
2 жыл бұрын
In the end I ended up using hot water and was able to soften up the plastic enough for the balljoint to fit the socket bioshock. Thanks for coming by and checking out the video, hey if you don't mind me asking, could you tell me if you're still able to see my newer videos showing up on your subscription feed? its been affecting a lot of viewers and just wanted to make sure you're not one of them, thanks again!
@ShumaiAxeman
6 жыл бұрын
I need this. Neeeeeeeed iiiiiiiiiit
@mariomario8688
4 жыл бұрын
Cool
@NathanTravis
6 жыл бұрын
Got one coming from eBay for £70. I don’t like the light blue parts of the hull, I’m sure there not on the filming model.
@johndayberry8172
6 жыл бұрын
Nathan Travis I got one for free at a garage sale a year ago only a couple of blocks from my house stopped in the garage sale and found my first diamond select ship one from The Wrath of Khan all dirty and stuff and no box I asked the lady hosting the garage sale whose ship is this? she replied it was her son's but he had moved out of the house years ago.
@johnbockelie3899
4 жыл бұрын
1701-A had light blue areas while 1701 refit had sea green areas.
@newtimetravelhyman88
5 жыл бұрын
Incorrect My Friend The USS Enterprise NCC-1701-A Was Seen At The End Of Star Trek IV The Voyage Home Not Star Trek V
@TheReviewSpot
5 жыл бұрын
yes it was
@newtimetravelhyman88
5 жыл бұрын
@@TheReviewSpot I Was Wrong
@thebipolarbear1
6 жыл бұрын
White impulse engines? Hmm I'd prefer red what were they thinking
@brettcooper3893
5 жыл бұрын
It's REGISTRY numbers, not release. I've never seen someone who has such an obvious love of Star Trek, but clearly doesn't know what aztecing is or knows that the "thrusters" are called NACELLES. Not trying to rag on you too much, just kind of scratching my head.
@TheReviewSpot
5 жыл бұрын
you'll be ok buddy
@VIIC71
5 жыл бұрын
I just purchased this ship and have the exact same issue with the ball joint not fitting into the bottom of the ship. What did you finally do to solve this problem for displaying????
@TheReviewSpot
5 жыл бұрын
I had to put the ball joint into boiling water to soften the plastic enough to fit it into the socket
@VIIC71
5 жыл бұрын
@@TheReviewSpot ok someone just suggested using a blow dryer to heat up the bottom part 1st then putting base ball in....THANK YOU GOR REPLYING 🖖🖖🖖🖖🖖
@TheReviewSpot
5 жыл бұрын
you're very welcome, hope it works out for you.
@VIIC71
5 жыл бұрын
@@TheReviewSpot It worked using the blow dryer to warm the base plastic to be soft enough to place base ball inside. I'm so HAPPY I didnt break the base ball off! THANK YOU AGAIN for replying! Great videos! 🖖🖖🖖
@balysky
6 жыл бұрын
Has anyone bought the orange ncc 1701 refit final flight ship. I was wondering if there are any different phrases or sounds than the previous ships?
@newtimetravelhyman88
6 жыл бұрын
The Final Flight Enterprise Refit Has No Sound
@johndayberry8172
6 жыл бұрын
balysky only if you are an Electronics buff as I am you can take an eprom chip and replace the factory one and then record phrases from the different movies as you choose and then use your home computer and get the vocal software from Microsoft and then add these phrases to the eeprom chip inside the diamond select ship I speak with authority because I have a Bachelor of Science degree in electronics engineering and in Telecommunications you will need a PC the proper software record the phrases you want then use a Dia cable digital to analog then transfer your recorded phrases to the eprom chip very simple at least to me anyway but if you want to pursue this further leave a comment on my KZitem channel and I'll show you how to do it.
@k.m.6559
5 жыл бұрын
Ye i have it , no sound or lights but looks great
@walterwright8454
9 ай бұрын
I love the Art Asylum ships but the stands are horrible.
@chrispleasantable
4 жыл бұрын
Just out of curiosity, how can this be called the Enterprise A if it looks so much like the Enterprise used in the first 3 films?
@superhayes256
4 жыл бұрын
chrispleasantable because that ship was destroyed and another virtually identical ship was renamed enterprise a.
@superhayes256
4 жыл бұрын
chrispleasantable because that ship was destroyed and another virtually identical ship was renamed enterprise a.
@jeffbenson7278
Жыл бұрын
Because it's a different vessel, but of the same class. Although never stated, Gene Roddenberry said it was most likely the USS Yorktown, which was damaged by the Whale Probe in STIV, recovered, and renamed in honor of Kirk & Crew's actions in bringing the whales from the past to the present.
@bitukukuasukgremany3
7 жыл бұрын
You really need a real screwdriver plus you are missing a piece that marries the stand and ship..half inch part
@TheReviewSpot
7 жыл бұрын
nope that was everything that was in the box
@Kevsspot
6 жыл бұрын
I think the factory left off a cylinder peg stand that fits on the top of the ball part of the stand. DST is known for QC issues.
@Mistraker
6 жыл бұрын
He needs to learn to turn the screw to the right to tighten it. He never actually screwed it in.
@TVOR
5 жыл бұрын
I have this exact enterprise and i can confirm the stand doesn't fit in as well initially. There was no extra cylinder peg include. I did eventually get it on by extremely massaging it in. Haven't taken it off since.
@Gonzalisto
5 жыл бұрын
@@TVOR Yeah!! You are right bro. Me too, same model, same problem. And I'm from Uruguay.
@Gonzalisto
5 жыл бұрын
My Enterprise-A have the same problem. I think the model is wrong for everyone.
@stabilelitehannover6005
6 жыл бұрын
hair dryer. warm up the plastic on the enterprise. stand will fit then.
@VIIC71
5 жыл бұрын
THANK YOU SO VERY VERY MUCH ! It Worked using your suggestion! Thank you again !!! 🖖🖖🖖🖖🖖
@ralphreinhardt6020
5 жыл бұрын
NCC-1701 REFIT,not retrofit.FYI.😃
@TheReviewSpot
5 жыл бұрын
thanks
@heyitsmeinverno
7 жыл бұрын
Its look like a vintage toys
@johnbockelie3899
4 жыл бұрын
The refit's engineering hull had sea green accenting .the 1701-A had duck egg.blue accenting.. The 1701-A was the hand me down USS Yorktown, NCC- - 1704. (1717) Star Trek 4. / 5. /....6. Commissioned. 2286. Decommissloned. 2293
@mrandrossguy9871
4 жыл бұрын
That’s a ripoff if the stand doesn’t fit with the ship 😳 if that’s with ALL the products that’s a design Flaw and should be fixed
@emmettrowe5164
5 жыл бұрын
In the light blocking they truly did not do correctly
@johnbockelie3899
4 жыл бұрын
The impulse engines on the 1701-A were white. I have a picture from Star Trek 5 . The 1701 refit has red impulse. engines. The two ships have small differences. 1701 refit had sea green accents while 1701-A had light blue accents./ strong back./ pylon hatches / the neck strip hatches.
@chriso2514
4 жыл бұрын
paid 65.00 for one today
@TheSamShow20
6 жыл бұрын
the audio plays to slowly and as a result it sounds like a bad Optimus Prime impersonation.
@alieundow974
7 жыл бұрын
hi ni vid
@clintcranford
6 жыл бұрын
I WANT THIS
@johnbockelie3899
4 жыл бұрын
Some one replied that the paint looks slapped.on. it's. The 1701- A. , watch.StarTrek 5. Scotty is fixing every thing. His engineering.log says he thinks the ship was built by.monkeys.
@chrispleasantable
3 жыл бұрын
The Enterprise-A looks almost exactly like the Enterprise in the first 3 movies except in "The Search For Spock", the ship gets severely damaged. So after getting it fixed up and making some minor changes, the ship became the Enterprise-A
@TheReviewSpot
3 жыл бұрын
Actually the original 1701 gets blown up with the self destruct and they have to build the 1701-A from scratch
@Christendom88
Жыл бұрын
Lol? The Enterprise got destroyed by self destruct and the remaining wreckage burned up in the atmosphere of the Genesis planet in Star Trek III. The Enterprise-A was another Constitution class vessel that was in Spacedock for refitting, probably the Yorktown, and was renamed the Enterprise-A.
@eXcommunicate1979
7 жыл бұрын
Just from the video I can see the paint job is sloppy af. Also, the ship seems to have a weird sheen to it, almost translucent quality.
@johndayberry8172
6 жыл бұрын
eXcommunicate1979 I have a solution to the translucent problem. I've built many Star Trek ships, just check out my channel and I have a solution to your problem. I would suggest dismantling the saucer section if you can, and the other parts of the ship and use tinfoil as a light blocking agent. That's what I've used on some of my other ships from Art Asylum. It's very light and it forms very well to any corner it needs to be. And best of all, acts as a perfect light blocker! Now this is a possible solution. I have yet to try it on the rest of my ships from the diamond select collection.
@startrekstartrek601
6 жыл бұрын
It's from the end of Star trek iv not Star trek v
@TheReviewSpot
6 жыл бұрын
Exactly
@johndayberry8172
6 жыл бұрын
Star trek Star trek very good catch on which movie it was used on but that doesn't stop the quality of his review does
@johndayberry8172
6 жыл бұрын
Star trek Star trek Oooopss! Didn't finish my comment. Phone said 10% charge left, so got my other spare one. Now as I was saying his video is a very good review of the diamond select ship and so what if he got the different movies incorrect? That still doesn't change the fact that he has given a very excellent review of the diamond select ship.
@matthewpoe1056
6 жыл бұрын
Duck-Egg Blue
@TheReviewSpot
6 жыл бұрын
sure
@jasondunbar3592
7 жыл бұрын
Or get a replacement
@matthewpoe1056
6 жыл бұрын
Airlock
@TheReviewSpot
6 жыл бұрын
yes
@JohnnyZenith
6 жыл бұрын
Why are their sound effects! It makes it a ridiculous toy. I hate it.
@johndayberry8172
6 жыл бұрын
JohnnyZenith a few things Johnny my boy for one thing you use their, when the proper term in this case is there. Now as for you hating the ship everybody is entitled to their personal opinion. But I myself have all the ships in my collection except the Wrath of Khan ship.
@kayleesgalaxy7100
6 жыл бұрын
John Dayberry u know that jewolry guy (sorry for saying his name wrong) on just the way u are by Bruno.....can I report him...I think its the best thing to do
Пікірлер: 150