Even though I know all this stuff, Colin's Lab has always been one of my favorite video segments! Used to watch it on Make, but I am glad that you are continuing on adafruit. The only thing I would like is more frequent videos, but I can't complain.
@azizbenamor7906
7 жыл бұрын
same
@mike0rr
9 жыл бұрын
Collin could make a video about watching paint dry and I would still watch it. Favorite KZitemr for sure : )
@domobrah2671
5 жыл бұрын
He'd be like "at first glance this may appear as simple paint drying, but let's look deeper" 😂😂
@warefairsoda
3 жыл бұрын
@Shepherd Kyler Nah maybe some other time
@lucasperotti7883
8 жыл бұрын
Collin is one of the best and funniest electronics professor on you tube . I only wish he had more tutorial videos .
@JeffRatliffhome
9 жыл бұрын
Collin's Lab is the best thing since Radio Shack.
@michaelfoster3763
9 жыл бұрын
I'm so happy that this series exists. Thank you Collin!
@kf7tkj
9 жыл бұрын
As always Collin's lab is a brilliant video with super easy to understand instructions and examples with a perfect mix of Collin's personality! Keep it up more Collin's Lab!!!
@giorgio1apple
8 жыл бұрын
This guy is amazing. His videos on Make where wonderful. Just now realised he had vids here.
@atom2319
2 жыл бұрын
Collin sir, you makes it so easy to understand.. thanks... Hope to see you more
@niranjanawati3315
7 жыл бұрын
The video presentation is just perfect! I may have done most of the stuff you are showing .. but I could not have beaten you in presenting it this way! .. accept my upvote!
@adafruit
9 жыл бұрын
@samuelwest2551
8 жыл бұрын
+Adafruit Industries I got the pot to control the light but I could only get it to turn it off/on instead of fading in/out. My code is identical to his. Any ideas?
@dhavalmysore
8 жыл бұрын
+Samuel West Have you connected your pot input to analog pin 0 (A)? In his code, where he reads the pot input, he reads it from analog input 0. But in the setup(), he still has it as pin 7 (digital), which ideally doesn't matter (if you are not using that), but I can see it may cause confusion. So go ahead and connect your pot to A0, if you haven't already. Also don't worry about setting A0 pin as input, that is optional.
@LoganDark4357
7 жыл бұрын
Samuel, you need to use a PWM pin, marked with ~
@JoaoPedro-ki7ct
4 жыл бұрын
How can you blank post on KZitem comments?
@ChrisFredriksson
9 жыл бұрын
Would love to see a whole series just like this, about learning to use all sorts of functions, with Collin of course. This was a really great video! Great job guys! =)
@mfeickert07
9 жыл бұрын
Can you also do a video for Raspberry Pi?
@txkent
9 жыл бұрын
What a nice surprise to find a video from Collin that I haven't seen! Great one - you re-invigorate me to want to make stuff.
@jorgemariozuleta
8 жыл бұрын
You are actually quite inspiring, dude. I've following you from a while now. And I really love to see and re watch your vids. Thanks, man. Regards from sunny Costa Rica
@stupossibleify
9 жыл бұрын
Really professionally produced and so useful. Now I'm scanning for more episodes...
@holycloudable
7 жыл бұрын
This is an amazing well thought-out and easy to understand video. You set a standard on explaining I wish everyone had. Thank you for this explanation.
@Smarttechnologyst58
4 жыл бұрын
Hello sir
@DavidClunie
9 жыл бұрын
another awesome vid by Collin, hope to see you at maker faire this weekend! :D
@JP-vp8bt
9 жыл бұрын
Congrats Adafruit on the partnership with Massimo big stuff and Love the products. Collin thank you and love the lab sessions, always a dapper lad. Reminds me of some agent from the matrix but with good human intentions and better dressed. Would love to see more rocketry products but understand the complications, trust me.
@oldschooljohnny
5 жыл бұрын
This really blows my mind! Thanks for the great tutorial!
@8tan
9 жыл бұрын
Finally the best video for understanding what arduino is. Thanks
@Chlorate299
7 жыл бұрын
I love Arduino, it's like Lego with electronics. Great for mechanical engineers like me!
@jjc355
7 жыл бұрын
Great job, Collin! I really appreciate your videos.
@OIP_1
9 жыл бұрын
just bought my first ever one of these. thanks so much for all your videos collin!
@aleezarubab6571
6 жыл бұрын
Just kamal I just love his style of explaining.. Very interning Intriguing
@SimpleStory95
7 жыл бұрын
This guy is awesome! Great tag line at the end,
@FanucM16i
7 жыл бұрын
Love ya Collin.! Definitely on the list: "I'd like to have a beer with." Thanks
@yoramstein
7 жыл бұрын
Great introduction. At 3:11 you use a pull up resistor can'nt you give the input directly 5V or whatever voltage?
@NexusrexDev
9 жыл бұрын
First time to watch Collin's Lab, Great video and a needed intro to the arduino..I needed a one! Great Job Collin..Great Job Adafruit :)
@stevedilley5866
9 жыл бұрын
Classy and cool video series. Thanks for your help!! Looking forward to more down the road. Happy Holidays.
@zenmaster24
9 жыл бұрын
Gret video for an intro to Arduino, but the links at the end to Collin's other video's (PCB milling and Solar) don't work
@adafruit
9 жыл бұрын
zen updated!
@LariDKdraws
9 жыл бұрын
Colin your videos are awesome! I love that you explain everything so well, even a noob like me can understand! Thank you so much!
@juanunknown4289
2 жыл бұрын
I like your videos. I like the tone in the intro as well.
@htfkid2000
9 жыл бұрын
What's up with the color of it? it looks... different
@f1ggyc
9 жыл бұрын
They changed it recently. The new ones are a bit harder to find as most supplies still stock the old ones
@twistedyogert
8 жыл бұрын
+HTFCirno2000 yeah, It's all chromed up. XD, it looked more shiny.
@paulrowland4857
8 жыл бұрын
Thanks for the hard work and effort. You are clear and concise!
@j.lietka9406
4 жыл бұрын
Collin, thanks for not running thru these tutorials.. some other youtubers are a blur!
@mickhernandez2665
3 жыл бұрын
one of the greatest invention ever invented
@BeaulieuTodd
6 жыл бұрын
After trying this, you can replace the loop logic with a single line of code: digitalWrite(3, digitalRead(7));
@TheJimtanker
5 жыл бұрын
programmingelectronics.com is the BEST resource to learn Arduino. The videos are entertaining as well as informative.
@MrShowTime27
8 жыл бұрын
Why does he divided by 4 the input value fron the potentiometer when setting it as the analog output for the LED? Thanks for your answers
@robertcroft2591
3 жыл бұрын
I would suggest doing an evil genuis series and do some mild makeup and jacob's ladder, plasma ball. Starring Colin, your dead(or undead)pan humour would play perfect.
@Adam645
9 жыл бұрын
Great introduction to Arduino video! I'd love to see a video or videos going over simple electrical engineering concepts such as resistors and capacitors.
@mountrat
7 жыл бұрын
Sir, I want to know the difference between the aurdino uno & arduino REES52. which 1 is best for beginners & which 1 is advanced thing...
@ManvirSinghP4L
9 жыл бұрын
I love this guy and his videos what ever happened to him? NO more videos??
@gurkancekic9057
9 жыл бұрын
comprehensive ,cool explanation.Thank you
@TheSuperRunner
9 жыл бұрын
I LOVE THIS GUY!! HE USED TO BE ON MAKE!!!!
@schlonald
7 жыл бұрын
The Alton Brown of electronics, I love this guy.
@cawig01
9 жыл бұрын
Hello I also have an Arduino and are still getting pretty used to it but there are two things I need to know.How does ground connection work.I've always been used to 2 cord but now there is 3.Also my computer is pretty jacked up is there any way I can input code manually with some device I can make.Can anyone help.Thanks. Collins vids are awesome.
@SureshThakor-ny9sk
6 жыл бұрын
Carson Wiggins
@fabianosarra9471
9 жыл бұрын
A video like this for the Raspberry Pi would be great too!
@kenkressin8526
9 жыл бұрын
Very nice. Makes me want to shop at adafruit... and today I did! :)
@stevenlee1726
7 жыл бұрын
Hello, i have a lipo battery 11.1V 3300mAh 30c. I wonder if it can be straight connected to Vin pin of arduino? I am afraid that it will burn my arduino pin by high current suddenly flow into Vin. Urgent, please reply. Thank you.
@ronaldsteele1730
9 жыл бұрын
Pardon me for asking. But that arduino seems a little to green. Isn't the ones purchased from the arduino suppliers blue?
@RaeesKL65
8 жыл бұрын
Bro can we program another ic using arduino ? (I meam can we copy this tested commands to another ).
@jaredj631
9 жыл бұрын
I want to make a 24hr timer that that controls a stepper motor to open a small door in the morning and close it at night. I don't want to have limit switches I want it to be like a little cnc. Open loop.
you should put the pin number (3) into a variable, or better yet, write a function where the pin number is a parameter
@Calvinatorzcraft
8 жыл бұрын
What programming language is that?
@malteeaser101
7 жыл бұрын
What's the difference between an Arduino and the Raspberry Pi and its GPIO pins?
@manwhofumbles
9 жыл бұрын
Can someone recommend some resource to learn how to do basic code like shown in the video please
@twistedyogert
8 жыл бұрын
I'm so glad I found this.
@Havanacuba1985
8 жыл бұрын
Really enjoy these videos
@KKuurus
8 жыл бұрын
Okay here is what I want to do, I wish to detect then eliminate the effect of gravity waves on a mass. How do I do that using an arduino? [SAC]
@julesverne6287
7 жыл бұрын
KKuurus what?
@MagicDrum
7 жыл бұрын
KKuurus I'll take two!
@cocoarecords
9 жыл бұрын
can anypne tell me if i can use tweezers in order to connect wires /jump wires etc
@robertpendergast2620
8 жыл бұрын
Very clear presentation.
@DrSlay1313
9 жыл бұрын
Great video!! Keep them coming please!
@int16_t
7 жыл бұрын
So the language of the arduino is Javascript?
@DarklinkXXXX
7 жыл бұрын
How do I use an Arduino to tap a 10Gbps fiber cable?
@nextstorming3908
9 жыл бұрын
I found lots of schematics to solder an arduino online and I'm going to try them on a breadboard and see which ones I like, also does anyone know if you put two ATMega chips in the same circuit, will the storage space and speed be doubled?
@nextstorming3908
9 жыл бұрын
i thought it would work because two 555s increase flash rate and two 4017s create a longer knight rider
@Buy-n-large
6 жыл бұрын
Why is the uno green?
@l4d2160
9 жыл бұрын
i really like the color of that LED.
@nextstorming3908
8 жыл бұрын
How do I tell if my arduino is a knockoff, because I have an UNO but it has a different board layout
@far-red
9 жыл бұрын
best explanation ever
@LoganDark4357
7 жыл бұрын
You forgot to mention that only PWM digital pins (marked with a ~) can output analog signals.
@DNOJ
9 жыл бұрын
We need more !
@dinagaranvijayaraj3203
3 жыл бұрын
How to make our own ardiuno?
@mrigankgupta3490
8 жыл бұрын
Sir ,in the potentiometer project y did u divide the variable by 4?
@Gama_Toad
7 жыл бұрын
I was asking myself the same thing. Didn't understand that part.
@RoboGenesHimanshuVerma
5 жыл бұрын
Because on Arduino the analogRead gives 10 bit output, but analogWrite takes only 8 bit input. Now 2^10 is 1024, but 2^8 is 256. So 1024/256 is 4. So he mapped the 10 bits to 8 bit by ignoring 2 bits on LSB side (divide by 4 is just right shift by 2 bits).
@st0ox
3 жыл бұрын
Can I do the same thing with a Raspberry Pi?
@AlexRtcoz
9 жыл бұрын
how fast do you type?
@oberek92
9 жыл бұрын
I agree, good overview.
@inURdreamsPRODuction
7 жыл бұрын
I would kill to have this dudes knowledge
@kumardigvijaymishra5945
3 жыл бұрын
I don't want to run loop. What to do?
@NoorquackerInd
9 жыл бұрын
Best response: Anything.
@wunderwaffeyt4077
4 жыл бұрын
7:16 the better question is, what can't you do with an Arduino?
@nextstorming3908
7 жыл бұрын
ive got three UNOs 1 SMD 2 through hole
@Smarttechnologyst58
4 жыл бұрын
Good job sir
@OneBiOzZ
9 жыл бұрын
im an electrical engineer and i still watched this video and i'm not sure why XP
@aleezarubab6571
6 жыл бұрын
Alyx BioHaz buhahhah because u are electrical engineering that's why u are watching this
@hrmny_
9 жыл бұрын
Why not the leonardo?
@ChuinhLanh1
7 жыл бұрын
Cảm ơn nhiều! Thank you so much!
@domobrah2671
5 жыл бұрын
2:18 I call this piece 'Man in Thought'
@electrocreations3300
7 жыл бұрын
Good Show
@garyoldham1325
7 жыл бұрын
Cool video
@benjamindavidovichwaals2899
9 жыл бұрын
thank you this informations. it is really help to me.
@somersmatthews2749
4 жыл бұрын
this guy is epic
@Blinkation
8 жыл бұрын
this video made me buy an Arduino.
@southernkatrina8161
4 жыл бұрын
It's the Emergency Medical Hologram from Voyager!!
@southernkatrina8161
4 жыл бұрын
He's very cool...
@RedFlyer350
7 жыл бұрын
Very cool video
@shubhamsagar631
9 жыл бұрын
i want to bild an 3d printer with it. can i use uno for it?
@dannlinx
8 жыл бұрын
+shubham sagar nop, u need a arduino mega for the control of the motors
@LoganDark4357
7 жыл бұрын
That's only somewhat correct. If you need more than 17 pins, then yes, you need an Arduino Mega. But if you use something like an integrated circuit that can be controlled with only a few pins, you can use an Uno.
@mytheory9701
8 жыл бұрын
it might be a great video but the background nagging noise "music" makes it very hard at least for me to even get into this - who's the great producer who determined that some loud background repetitive annoying sound must accompany these videos to make them professional???!!!
Пікірлер