Yep! He's satisfied with the placement. #HeadNods. Great Video! Glad he did an example without trenching! I like to watch a video before I get started so I don't look stupid with the neighbors watching through the blinds...
@halcyonoutlander2105
4 күн бұрын
He has Parkinsons...Not funny.
@jessoakley3746
2 жыл бұрын
Redesigning the landscape. Would love a video on easy removal of edging stakes for relocation.
@Colmet
2 жыл бұрын
Hi Jess, are you using the stakes that come with the edging, or the stakes that are sold separately?
@jessoakley3746
2 жыл бұрын
@@Colmet I figured out a way to remove it, but was using the stakes sold with it.
@Colmet
Жыл бұрын
@@jessoakley3746 Thank you for letting us know! I will add this to the list for updating tips and tricks!
@cmleoj
8 ай бұрын
Boy this stuff got high priced! $27 for 8’ section. I used to buy this stuff all day for $12 for a 10’ stick, and the metal was much thicker. Shrinkflation killing us out here, bro.
@AntLive29
4 ай бұрын
BIDENFLATION 😢
@TexasTexas-d9g
2 ай бұрын
Bidenomics
@matthewkaplan2572
5 ай бұрын
I haven't started the project yet, but I have a question. What do you do if the metal edging extends 2-3' further than brick wall that the edging should butt up against? Do you bend and it breaks, are there ways to adjust the length of the piece, etc. Reply
@Colmet
5 ай бұрын
Hi Matthew, Depending on where the stake pockets are when you reach the brick wall, you have a couple of options. You can bend the edging and let the extra length rest against the brick wall, or you can use a hacksaw with a sharp blade to cut through the edging. If you cut through the edging, we recommend a splicing stake to cover the cut end and secure the edging into the ground.
@swan1703
3 жыл бұрын
Would love to purchase a greater depth metal edging, do you provide it? Thank you for your help.
@kcyoganut
3 жыл бұрын
Best method to cut edging if needed?
@teeare2367
3 жыл бұрын
kzitem.info/news/bejne/yK96mpiKiIF1l4Y
@ricotaylor3958
3 жыл бұрын
Some people say a sawz all 20 v tool works with a metal cutting blade. I disagree, too much kickback. Maybe a 60v upgrade reciprocating saw by Dewalt may work better? I doubt it! I choose an Eastwood mini metal saw and it worked great!! Only disadvantage is that saw is electric, but does the jobs!
@rivermike5257
Жыл бұрын
I used an angle grinder.
@fiouable
3 жыл бұрын
This will work only in frost free zones
@ricotaylor3958
3 жыл бұрын
I was hoping for the best with this metal edging. Tough to handle in eight foot sections , heavy when buying in bulk, and horrible when I had to cut the metal edging for fit. The paint perks off easily and exposes metal to rust!!
@pearlperlitavenegas2023
3 жыл бұрын
How did you cut it?
@ricotaylor3958
3 жыл бұрын
@@pearlperlitavenegas2023 I had to buy a saw from Eastwood mini metal saw, only saw that worked, but is is electric. Worth it to make clean cuts! I stopped using metal edging because the black finish rusts off and peels after one season and winter in NJ. I found sturdy plastic edging like paver edging that works fine!! The problem with metal edging is that no primer is applied before the black finish which causes paint to fall off the metal edging and spikes. Best wishes!
@pearlperlitavenegas2023
3 жыл бұрын
@@ricotaylor3958 i sprayed mine with black antitrust spray can paint....plastic warps under the hot Texas sun so that's not an option for me
@rivermike5257
Жыл бұрын
I used an angle grinder to cut. Cut right through it. Install was easy enough once you get first end pinned down.
Пікірлер: 22