Download all the workflows from the pixaroma-workflows channel on Discord. The links are also organized there. discord.gg/a8ZM7Qtsqq If you have any questions you can post them on discord or Pixaroma Community Group facebook.com/groups/pixaromacommunity
@2008spoonman
Ай бұрын
The way you explained this Flux model is clear and crisp 👍🏼👍🏼 Excellent, no really excellent step by step instructions 👍🏼👍🏼 I cannot explain how much this video means to me. Fantastic!! Oh, and you have a very pleasant voice. Thanks again!
@GenoG
18 күн бұрын
I have to say that I really appreciate your help learning all of this. Your videos are very well made, detailed and informative. I have NEVER wanted to use ComfyUI and now I LOVE IT! I watched several videos and they always made my head hurt!! Yours made sense!! Great job! I'm looking forward to watching more of them... I know I am barely scratching the surface! 🤓
@pixaroma
18 күн бұрын
I appreciate that, thank you 😊
@snirbarilan4147
Ай бұрын
bro you are crazyyyyy!!!! your contact this seires is a money based course for free, you are a very decent techer and i just binged the whole seires and discovered you uploded this right when i was looking for flux contant to get started!!! thanks alot i wish i could support you more
@pixaroma
Ай бұрын
thanks, glad I could help :)
@LoyalWater
26 күн бұрын
Brilliant tutorial series !!! The best comfyui tutorial series on youtube by far ..
@L3X369
19 күн бұрын
Since flux launched, I kept running away from it, due to how complicated it looked. You explained quite everything needed to get started. Thank you for this video!
@59aml
Ай бұрын
Thanks for the tutorial. Really well explained and great editing.
@0xYnT5
15 күн бұрын
First time I ever send a tip on KZitem. Thanks for the amazing work, the way you share your knowledge with such great pedagogy is truly appreciated. I hope you continue to create this kind of video, which is very valuable and allows beginners like me to approach these topics without any friction.
@pixaroma
15 күн бұрын
Thank you so much for your support, more tutorials are coming each week ☺️
@DezorianGuy
10 күн бұрын
Can't wait to go professional with Flux - with your tutorials by my side.
@Valket
10 күн бұрын
Same just descovered all this stable diffusion/civitai/comfy/black forest lab mess yesterday and I am still blown away.
@daykeyy
26 күн бұрын
Great tutorial series, very easy to understand. Thank you :)
@cristiantapia7450
Ай бұрын
Excellent tutorial, very detailed without being too complex. Thank you!
@Patricia_Liu
Ай бұрын
Thanks a ton for the amazing effort you put into your tutorials. They truly stand out!
@eslamafifi1020
Күн бұрын
amazing tutorial thank you very much
@jennifertsang6572
Ай бұрын
Great tutorial. I always learn so much from your videos!! 😊
@nomorejustice
Ай бұрын
yeahh finally got the proper updates! thanks very much!
@baheth3elmy16
Ай бұрын
Impressive work and great video! Thank you very much!
@B3D
19 күн бұрын
really useful . thank you so much
@blackswann9555
Ай бұрын
great video, I am going to install and try this today. I am currently using SD Forge to do some transparent bg images.
@Mypstips
Ай бұрын
Great video! Thank you!
@SumoBundle
Ай бұрын
Thank you for this video. Very interesting for me
@MilesBellas
Ай бұрын
Great video !😊
@shushens
29 күн бұрын
This is the best flux beginner tutorial I have found on KZitem and it has everything I need to get started. Thank you so much! So it looks like FP8 might scratch my itch under most circumstances. What I am wondering about is, with most LoRAs available on the internet being generated against SD1.5 or SDXL, what am I gonna combine with Flux? Also, where could I find additional styles like you have in your CSV, which are recognised by Flux?
@pixaroma
29 күн бұрын
Check the episode 7 for styles and how to use it. Only lora made for flux will work with flux, you cannot combine them. And also I saw comfyui need converted lora for comfyui the default ones didn't work
@GenoG
18 күн бұрын
Thanks!
@pixaroma
18 күн бұрын
thank you so much 😊
@Fayrus_Fuma
Ай бұрын
E-boy! Still on the road, will watch the video in a couple hours.
@makadi86
Ай бұрын
great effort here
@ASAS-ci3xu
21 күн бұрын
Excellent tutorial series I watched so far for ComfyUI and FLUX. Great work and thank you! By the way, can you share how to make the animation at the end this episode? D-ID or Heygen?
@pixaroma
21 күн бұрын
I used image to video online on the Kling Ai website to get that animation
@ASAS-ci3xu
20 күн бұрын
@@pixaroma Many thanks!
@admiralevan
29 күн бұрын
holy shit that's quality
@ausbildungbew2189
Ай бұрын
Thanks a lot!
@konnstantinc
Ай бұрын
more, more more :! :))
@mikesavad
23 күн бұрын
i tried f8, using a 4070 12gb card, with 32gb, and this is the second time it crashed. Not as violently as the 16bit version. I'm still not sure what i'm doing wrong. It also took forever trying to load. I bought more ram, i'm hoping that will help out here. I can only assume i'm still maxing out the ram. Maybe a bigger swap?
@pixaroma
23 күн бұрын
It shouldn't crash, i can run on 6gb of vram just takes a long time. Try looking up for gguf models and the nodes, there are like flux dev q4, q6, q8 and so on, start with q4 version and see if that one works, the workflow is a little different so search for a tutorial online first
@danteshume7933
Ай бұрын
Sir, your tutorial is great. will you teach about Control Net?
@pixaroma
Ай бұрын
yes, i will do first for sdxl controlnet, and on later videos when more controlnet appear for flux for that as well
@danteshume7933
Ай бұрын
@@pixaroma Thank you very much, and I wish you a happy life.
@vanad1um
16 күн бұрын
Hello, that was very helpful but can i ask you why can't i queue the prompt on weight_dtype other than fp8_e4m3fn? It just becomes stuck on Load Diffusion Model and then ComfyUI just says Reconnecting while i don't recieve any specific message in console
@pixaroma
16 күн бұрын
Usually when it does that is run out off memory, so it is like it is crashing. So maybe is too much for your pc with other types. You can also try to add arguments in the run bat file like --lowvram to see if it helps
@vanad1um
16 күн бұрын
@@pixaroma yeah I was thinking of that, just opened performance screen and see that all of 32 GB RAM is gone. Thank you for the answer!
@fabiojj6991
Ай бұрын
👍👍👍
@itsmewaldi
26 күн бұрын
How would you simplify their workflow? I also find it needlessly complex.
@pixaroma
26 күн бұрын
I mostly use now the dev fp8. the workflow look similar to sdxl and the quality is good, I have more compact version on discord for those workflows
@tombkn3529
9 күн бұрын
thanks very much, i have a problem : when i generete a picture it stucks : l after loarded completely in ksampler 0%__I 0/4 [00:00
@pixaroma
9 күн бұрын
Do you have enough vram? Maybe is too big for your video card. Does other models work like schnell?
@christophermalone6313
2 күн бұрын
Hahaha, "I am not a witch".
@tofanbehera273
Ай бұрын
Could you Please make a tutorial about Prompting for image generation.
@pixaroma
Ай бұрын
On this video i cover that kzitem.info/news/bejne/kYajzKSlomVedGUsi=MA21lIwQKIJCoyom for flux just use normal language, or chatgpt but is quite good at understanding
@Jordan-tr3fn
28 күн бұрын
I installed comy ui with the standalone build for Windows but I don't have the manager at the bottom any idea why?
@pixaroma
28 күн бұрын
Check episode 1 is a custom node that you must have installed since it is quite useful, after that it will appear
@Jordan-tr3fn
27 күн бұрын
@@pixaroma Thank you, I will check all your episodes !
@LewGiDi
Ай бұрын
Thanks for the video! I not sure what in doing wrong I've tried to use NF4 version and I had error of memory out in the first run the I re run it and its really slowly 82s/ it while (20 minutes per gen) using the f8 version with the unets takes 2 minutes per pic. I'm using a potato lap with 6gbvram with 32 gb RAM . Do you why is happening?
@pixaroma
Ай бұрын
I dont know maybe is some settings or something wrong with the version, try again to update comfyui. I have the same problem with rtx2060 with 6gb of vram and 64gb of ram, it took me 6 minute on second generation and 9 minutes on first generation. I think with unet it loads all clip models separate and maybe that help. Maybe wait a little until things get more stable, since is all new, and i see new version coming out each day. I am still using sdxl hyper on my old pc just because is fast and get ok results :)) and on new pc i have only half second difference between dev nf4 and dev fp8 so for me didnt help much on new pc.
@pixaroma
Ай бұрын
I just tried the forge ui, and updated like a few seconds ago, and form 6 minutes with schnell it takes only 27 seconds, so is fast, you can give it a try until is fixed comfyui maybe to see if helps kzitem.info/news/bejne/o3yJqqeDs5GmeGU
@Fayrus_Fuma
Ай бұрын
Question - what resolutions can be used other than 1024*1024? Will the picture be deformed in the same way if I use 1280*720/1920*1080?
@pixaroma
Ай бұрын
you can use up to 2MP resolution, it can work quite well with different ratio compared with sdxl that if you go to high it start messing the composition. Just dont go to high and try to have width and hight divisible with 16 or 64, I saw it get better results. So for example I use 1368x768 then I upscale it to have it for youtube 16:9, but it can do also 1920x1080 but sometimes it can look a little blurry. Just keep in mind the bigger the size more time it will take to generate, and you need more vram to handle really big sizes.
@Fayrus_Fuma
Ай бұрын
@@pixaroma What can you recommend to improve photos (upscale)? So that nothing changes or changes minimally? Otherwise, some upscales change the details in the picture.
@pixaroma
Ай бұрын
When i am in a hurry; just use the topaz gigapixel ai with sliders to a minimum :) in comfy UI i use ultimate sd upscale with low denoise. I plan to do a video for upscaling maybe next month with different methods so i will do more research then.
@Fayrus_Fuma
Ай бұрын
@@pixaroma Good! I've watched different videos and what the authors have is normal, it looks weird to me. Even watched the uses of the likes of 4x_NMKD-Siax_200k upscale.👍 topaz gigapixel I don't have it in the built-in. So I'll wait for this topic to be dealt with as well.🤔
@pixaroma
Ай бұрын
@@Fayrus_Fuma topaz gigapixel ai is a paid software specialized on upscaling, is not in comfyUI. But I will do my research on different methods and I will present in a video my findings
@manolomaru
Ай бұрын
✨👌💪😎🤗😎👍✨
@KnotXackly
Ай бұрын
How come I don't have the Manager button in my side menu?
@pixaroma
Ай бұрын
Did you install it? Is it on episode 1
@KnotXackly
Ай бұрын
Yes I installed it following episode 1
@moc_santos
Күн бұрын
I'm crashing here, is it because I have 16gb of ram? I'm using a rtx 3060 12gb.
@pixaroma
23 сағат бұрын
try the gguf models are smaller check episode 10, like q8, it should not crash, someone used on 12gb, i used schnell on 6gb so it should work
@liquidmind
29 күн бұрын
ANYONE knows how to use control net for FLUX in FORGE? I get a model error if i use CANNY or DEPTH from XLabs-AI/flux-controlnet-collections 2024-08-17 21:38:29,461 - ControlNet - ERROR - Recognizing Control Model failed: C:\TEMP\FORGEFLUX\webui\models\ControlNet\flux-canny-controlnet_v2.safetensors
@pixaroma
29 күн бұрын
I saw someone using them in comfyui, don't think it work yet with forge
@liquidmind
29 күн бұрын
@@pixaroma yes, but on comfy i see tutorials that people actually need to wait 5 minutes for a schnell generation, on a 6GB VRAM card like i have, compared to FORGE that i can do a schnell generation in 20 seconds!!! so unless you have a comfy UI tutorial that makes a 6GB VRAM card works as fast as it does in FORGE, i might have to wait.... Is this comfy tutorial good for a 6gb Vram GPU?
@liquidmind
29 күн бұрын
ok so in minute 7:18 you mention that on a 6Gb GPU it takes 5 minutes to generate 1 image?
@pixaroma
29 күн бұрын
I am at that old pc rtx2060 6gb of vram, and 64gb of system ram. I updated the comfyui and I am redoing the test. I will get back to you with results
@pixaroma
29 күн бұрын
I had some problems with comfyui and had to reinstall on different folder because it took forever to load the model. Here are the results on the RTX060 6GB VRAM. First generation take longer because it loads the model, but after that is faster. flux1-dev-fp8 First generation time: 155 sec After that only: 113 sec flux1-schnell-fp8 First generation time: 63 sec After that only: 26 sec
@liquidmind
29 күн бұрын
@@pixaroma nice!! lot better... is this using your tutorial for comfy ui?
@pixaroma
29 күн бұрын
@@liquidmind yes
@liquidmind
23 күн бұрын
@@pixaroma no luck for me on comfy ui, it takes 6 minutes compared to 1:30 minutes on forge!! same DEV fp8 model!!!! how did you manage to get so fast on comfy with 6gb VRAM?
@orionconstellation2
Ай бұрын
where did you get this prompt styles selector and styles 😬
@pixaroma
Ай бұрын
Check the episode 7 I explained everything there, they styles file I created and i use some custom nodes to load the file
@MichaelL-mq4uw
Ай бұрын
didn't work. I get "module 'torch' has no attribute 'float8_e4m3fn'" than I try to use this checkpoint
@pixaroma
Ай бұрын
Did you download from the link and used the workflows i shared? All who tested said it worked, try different models see if you get it to work, maybe you are using a workflow for different model or something, not sure
@pixaroma
Ай бұрын
From what i saw online you could try to fix it by updating pytorch
@pixaroma
Ай бұрын
Try also update comfyui and dependencies bat github.com/comfyanonymous/ComfyUI/issues/4297
@MichaelL-mq4uw
Ай бұрын
@@pixaroma it seems like this model wasn't very well built (It's kind of "beta"). I updated transformers, uninstalled torch an installed it again. updated comfy. Nothing helps. flux doesn't work, sdxl works perfectly.
@pixaroma
Ай бұрын
Sorry it didn't work, besides trying different models not sure what to say, i tried on 2 different computers and on discord all seems to get it to work, maybe try installing in a different folder maybe it something that doesn't like in that current installation. Or try the other video with forge ui. I mean flux really worth a try since can do so nice graphics
@DealazonDaily
Ай бұрын
Hi how can we use meta AI to generate prompt for the stable diffusion? Compare to chatgpt meta AI is more easy but I don't know how to ask for it to create an prompt for the stable diffusion? Can anyone please help me with that
@pixaroma
Ай бұрын
I dont have access to meta ai, but in chat gpt I can do something like : give ma a prompt for stable diffusion for a cartoon cat digital painting And I get a Prompt: "A charming and playful cartoon cat with large, expressive eyes and a mischievous smile, sitting in a cozy living room. The cat has soft, fluffy fur in shades of orange and white, with a curled tail and small, pointed ears. The living room features warm lighting, a comfortable armchair, and a few scattered toys. The art style is vibrant and colorful, with smooth, exaggerated lines and a whimsical, lighthearted atmosphere."
@DealazonDaily
Ай бұрын
@@pixaroma but we need to add something like negative Prompt right bro, So indepth we need to understand and to create an images using that so It is basically some know how to do it anyway thanks for the reply
@pixaroma
Ай бұрын
@@DealazonDaily flux doesnt support negative prompt. And for sdxl you just add the words you don't need in the generation. Or you can use the art styles like I showed in the video
@DealazonDaily
Ай бұрын
@@pixaroma thanks actually I am using stable diffusion so that's why I am asking for this thanks
@havemoney
Ай бұрын
NF4 was compared incorrectly; at 30 steps there is no difference.
@pixaroma
Ай бұрын
Thanks for the info, i tested on 20 steps since it was the recommended steps for dev, and the NF was supposed to be the fastest so I didn't think to add more steps to make it less quick. So it is good to know it can do the same.
@GioKl-vr2ju
27 күн бұрын
hi, after update i got white screen...
@pixaroma
27 күн бұрын
Try to update again maybe, what it says in the command window? What error?
@vixerblade8789
24 күн бұрын
Can run on GTX 1070? 32gb ram?
@pixaroma
24 күн бұрын
I saw on reddit a post saying it was running on it but a 512px image took 6 minutes for dev nf4, so is better to just use sd 1.5 models, or maybe sdxl hyper, until you get a better video card
@vixerblade8789
23 күн бұрын
@@pixaroma thanks bro
@Pawel_Mrozek
20 күн бұрын
Milion tutorials how to use FLUX it in Comfy UI and very few how to set everything to work in normal UI for ordinary people and none how to use Controlnet with it without Comfy UI involved.
@pixaroma
20 күн бұрын
Forge Ui is still working on all the extensions and need more time to make it work, it all work, a1111 is also behind with updates, an comfyui works with flux from day one. There are starting to appear more flux control net but i am waiting for a unified model like we have on sdxl so i dont download a lot of models. Some from xlabs seems to work on comfyui. That why you dont find many tutorial because people didn't make it work yet, and when it works in next update fix something and mess something else, so people wait to be stabilized a little to get a more stable interface and so far comfyui is quite stable compared to others
@Suat-b8u
11 күн бұрын
git pip lots of somethings that i do not know.
@pixaroma
11 күн бұрын
If you still have problems installing tag me a message on discord ☺️
@orionconstellation2
Ай бұрын
there is new flux model which is more faster
@pixaroma
Ай бұрын
What is the name of the model? I have delayed this video a few times because each day i found a new update 😂
@orionconstellation2
Ай бұрын
@@pixaroma lol , i just checked the vid you have it already 😁
Пікірлер: 113