This video is for TMY. For my TM3 2021 I had to pry it from the top of the cover, not bottom as on bottom side there was nothing to pry. Also on TM3 there is enough room inside the cover to keep the commander hidden there.
@deandawiz
6 ай бұрын
thank you bro ❤
@victor7wy
5 ай бұрын
Indeed, this comment has been helpful! There's no room for prying from the bottom for the M3 2023. Going from the top and sides is the way to go. The four tabs of the cover are on the two sides.
@002simba002
4 ай бұрын
Very good comment, on my M3LR 2021 I also had to pry off the cover on the upper hand side of the cover.
@harryhluong833
4 ай бұрын
Have you experienced any issues with hiding the commander? Would love the cleaner looker.
@victor7wy
4 ай бұрын
For the M3, it took a couple tries to fit it in. It's a tight fit with the cables in the way. The video's connector positioning/dressing method is the way to go, and there's just enough room in there to park the commander. For my cover there's a very minor bulge, but the four tabs manage to engage and the cover is secure.
@ezgundam5074
6 ай бұрын
Will you release a video for commander (gen 2) for front installation for Model Y 2019-2023
@pallibj
7 ай бұрын
I have a Scan My Tesla Bluetooth dongle connected in the rear of my 2022 Model 3. Do I understand right that I can unplug that one, connect the Commander Gen2 and still use Scan My Tesla app? In addition, can I connect 2 phones to the Commander Gen2; one (iPhone) for S3XY button app and another one (Samsung) for Scan My Tesla?
@ronolsberg1468
20 сағат бұрын
You are not required to power off the vehicle before installing the rear/front interface cables? Does Scan My Tesla have access to ALL SMT data when the commander is installed using the rear interface cable? Same question with the front interface cable. From what I gather the commander sends data to the SMT app and/or the S3XY app running on a smartphone using Wifi instead of Bluetooth like SMT did previously?
@titaniummazdaspeed6
7 ай бұрын
Will the gen 2 commander still work with 2018 Model 3’s? I ordered S3XY buttons without realizing that it said 2019-2020.
@jaykid007
7 ай бұрын
Waiting for answer
@android04
6 ай бұрын
It will still work with the 2018, but they don't sell a cable to connect to them. I am making my own for it to use on my 2018 Model 3.
@titaniummazdaspeed6
6 ай бұрын
Just received the buttons and the cable connector does not work for the plug on my 2018. Oh well…. ☹️
@mustafa550i
6 ай бұрын
Hi. I just ordered mine for my 2023 model 3 LR. For my model, do I put the commander where you showed here or by the drivers side footwall?
@uberacx
16 күн бұрын
What is that extra two pin connector coming out from the split extension cable that is not used in the video?
@padtline7860
12 күн бұрын
They say it in the video, it's for upcoming features in the future
@anb7495
6 ай бұрын
Cell phone is unable to find the commander after installation to the back cables, any suggestions??
@MD-ej1pp
6 ай бұрын
Salut, j’ai le même problème que toi! Tu as trouvé une solution? Merci😉
@luismarcano6297
5 ай бұрын
Can i still install in rear console for 2024 model y LR?
@calsal64
7 ай бұрын
Hello, I have a mod Y Berlin sep 2022. I built a monitor on the rear… How can I put the commander? May I have your help to resolve it. I don’t like to put it in front. Thanks
@EnhanceAuto-S3XY_Gadgets
7 ай бұрын
Hi. You can connect both cables one to another. Our cable to the monitors cable , and then connect it to the car. Both items will work together
@LePerlashez
5 ай бұрын
I find the sexy knob to be a very good product. I would like to know if it is possible to hide the Commander gen2 in the rear center console, because I don't like it lying between the seat and the center console?
@stefanteunissen1447
7 ай бұрын
I have the old commander, is the new one better? And is the side installation better for the model y?
@juhapetteri8860
5 ай бұрын
Hi, where do you put the commander on Tesla Y, when it is rear installation ? Is it dangerous if you accidentally pour liquid like soft drinks between seats. The commander does not fit inside the panel ?
@ayurdal
7 ай бұрын
What is the rear connector used for? Do we need to install both the front and rear controllers on a typical s3xy button installation?
@notinthemanual
7 ай бұрын
The front and rear connections give you the same functions. The front connection allows you to have the commander hidden and is a tidier installation as opposed to having a cable and commander hanging out at the rear
@notinthemanual
7 ай бұрын
You only install in one or the other locations not both.
@Mrback2k9
2 ай бұрын
App can’t find the commander, commander led is lightning
@990Hyper
7 ай бұрын
you could put a little led light on the new commander to see if it works or not. first time i tought it was broken, no light, no nothing . I like my buttons a lot ! Do you guys think it will be possible to trigger boost mode for Lr versions?
@EnhanceAuto-S3XY_Gadgets
7 ай бұрын
Thank you for your feedback! Boost mode with this current version is not possible.
@990Hyper
7 ай бұрын
@@EnhanceAuto-S3XY_Gadgets what do you exactly mean with " current version" ? Firmware / software and so maybe in the future will be possible to get this much wanted additnal feature, or it's hardware wise , so it never ne possibile ? Thanks
@EnhanceAuto-S3XY_Gadgets
7 ай бұрын
Hardware wise
@990Hyper
7 ай бұрын
@@EnhanceAuto-S3XY_Gadgets What is needed to get that boost ? A different kind of commander ? Are you going to make it happen ? Thanks
@skumkaninen
7 ай бұрын
That would be hacking something Tesla charges for, if they do that, Tesla will stop enabling products like this working, they will never enable a feature like that. @@990Hyper
@anb7495
4 ай бұрын
The new commander is not found by the app
@crex7510
7 ай бұрын
Would you like to create Enhauto's own Windshield HUD by taking advantage of Wireless OBD?
@EnhanceAuto-S3XY_Gadgets
7 ай бұрын
We have many ideas, we are just short on staff and time 😂
@notinthemanual
7 ай бұрын
A well made HUD would be awesome 😊
@dvr55us
6 ай бұрын
@@EnhanceAuto-S3XY_Gadgets I made Mitsubishi HUD with Sofia colleagues at visteon company...but it was 5 years ago now... everyone almost left the company!
@Teslandicap
6 ай бұрын
Dear team, I received Knob and when I wanted to install it, I remember when I talked to you at Amiens Gigatelier event that it should be installed on the front bus to have more functionnalities. But my car is a 2021 SR+ and if I understand, I don't have a front connector for the commander. Does it mean that I will not be able to use all functionnalities ?
@EnhanceAuto-S3XY_Gadgets
6 ай бұрын
If your car has an Intel processor, you will not have the extra future updates that the Commander will have later in 2024. You will still have all the main updates that add features and smart actions to the Intel mcu , but not those that are for the AMD one. It is not our fault but Tesla’s
@welfiblablabla
7 ай бұрын
I just received my S3XY knob. Is there any advantage of using the Gen 2 commander VS Gen 1? (Which I already have installed) Dies the knob only work with Gen2?
@EnhanceAuto-S3XY_Gadgets
7 ай бұрын
It does work only with gen2. Please make sure to plug the knob first and installing its latest software, before plugging the Commander
@user-ok5ib9ky5o
7 ай бұрын
Is the plastic tool, which is used to remove the cover, also delivered with the commander?
@stuff7442
7 ай бұрын
Yes, it was in the box
@Mrback2k9
2 ай бұрын
No was not in the box.
@tomooo2637
7 ай бұрын
When i added a gen 1 commander it said to completely shut down the car. You did not show that here. Do you recommend a complete shut down for installation
@DemonicBob
6 ай бұрын
I’m actually just about to install and have that question lol
@Marki555
6 ай бұрын
@@DemonicBob I was waiting for the car to shutdown for 10 minutes, it did not, so I installed it anyway without any issues.
@Blanka-999
7 ай бұрын
I have a 2023 (no USS) model 3 and there is already other device on the front instalation. Can I use the back installation on this model?
@gottkarli1
7 ай бұрын
Yes!
@madsostergaard
7 ай бұрын
Is it possible just to install the gen2 commander, and use the App for all the functions, with 0 buttons at all?
@notinthemanual
7 ай бұрын
Yes although I’m not 100% if all the functions are available using the dashboard.
@victor2krk
7 ай бұрын
Can the commander be left inside the cover?
@BigManator
7 ай бұрын
No, there is no space. you need to do the front installation für that.
@Marki555
6 ай бұрын
For TM3 2021 yes, there is enough space, I have installed it inside the cover.
Пікірлер: 57