It took me like 3 days to figure out most of the stuff that was mentioned in this video. While there's no official documentation on the manual about how to troubleshoot the issues, this video will save you a lot of time. Great stuff, thanks for this!
@kruddystupididiot
4 жыл бұрын
why is the bake button not on my settings. ITS REALLY ANNOYING ME! PLZ HELP!
@tomdrake4069
4 жыл бұрын
can you run by me if you can how to water sim a cube falling down steps with water splashing inside? you touched briefly on it......ASAP PLEASE.....AYOUR WORK IS wonderfully inspiring.....
@glitchystar1336
4 жыл бұрын
TheModulator Hey switch from replay to modular and go to cache section of the domain and select an EMPTY folder..
@glitchystar1336
4 жыл бұрын
Took me 3 hrs before I actually gave up and went to youtube
@jaredcrown5812
3 жыл бұрын
@@kruddystupididiot Select Domain, then Select type, then change the option from replay to modular or All (blender 2.91.0 )
@jaredcrown5812
3 жыл бұрын
At 1:00 Select "Is Planar" option for planes ( I believe this option is for planes cuz when i selected this option, it worked well) It works for cylinder or cube which has no thickness
@habag1112
4 жыл бұрын
Thank you! I couldn't figure out why my fluid was passing through the mesh, turns out the timesteps were the problem.
@BlenderMadeEasy
4 жыл бұрын
Glad I could help!
@3d-mdsacademy307
4 жыл бұрын
This is awesome! man. I have been scratching my head for days trying to figure out why my fluid will not flow through the pipe. I watched this video about fixing the normals and try it. Guess what, boooom....it worked great. Thanks for taking the time to make this tutorial.
@ligmaknutz
3 жыл бұрын
My Fluid simulations never work, I add a uv sphere then then select fluid, then change the settings to liquid and inflow and domain resolution to 64. pretty much the same setting you use and see no particles when i bake data. this happens everytime
@mumkichux
2 жыл бұрын
you also need to change setting in domain and flow. Otherwise just select the uv sphere and then in object tab or search quick fluid that will work
@smokeypillow
2 жыл бұрын
Same here. No matter what I try even the simple sim setups don't work in Blender, just not worth the time anymore :(
@BALDMONKGAMING
2 жыл бұрын
make the sphere bigger and try again
@lennyface987
5 ай бұрын
YOU ARE MY SAVIOR!!! If this video didnt exist it wouldve tooken me much more time.
@octocypher1
3 жыл бұрын
Thank you for this video. I watched several videos before this one, and none of them is as simple to understand and straight to the point like this one. Thanks!!!
@ratzitrax
2 жыл бұрын
I can't believe this video has been online for two years and I'm just now stumbling across it! Thank you so much!
@BradPetersonArt
3 жыл бұрын
that was awesome. I was about to start bashing head against desk.
@yosefstanton5470
4 жыл бұрын
You are my hero. I would never have thought to turn the normals inside out and then change the thickness! So grateful you took the time to make this video!
@BlenderMadeEasy
4 жыл бұрын
I'm glad it help! Thank you!
@mixikpixi6123
4 жыл бұрын
Thanks a lot maaan. I actually learned a lot, when u explained the most commont mistakes anybody could run into.
@Iridesium
4 жыл бұрын
Thanks dude this really helped me!
@BlenderMadeEasy
4 жыл бұрын
Glad it helped! Also love your videos! Keep up the good work!
8 ай бұрын
I'm using the fluid simulator in Blender 4 and this video solved all my problems with dispersing particles. Despite the posting date, this tutorial remains current and functional. Thank you very much.
@BlenderMadeEasy
4 жыл бұрын
If you have encountered any other problems that I did not discuss in this video reply to this comment and I will try to help out! Edit: If you do not see the bake button that is because in the Cache panel the Type is set to Replay. Set the type to Modular and you will see the button. Also sorry for the low framerate. I forgot to set up my recording properly! Whoops. Next tutorial will be back up to 60fps!
@blank141
4 жыл бұрын
How about the grid pattern in the particles like spray, foam and bubbles. How to solve it?
@moepreme
4 жыл бұрын
Blender Made Easy Yeo bro is there any way I can contact u????
@BlenderMadeEasy
4 жыл бұрын
I think that is a bug at the moment. I heard somewhere that it shouldn't be like that. CG Geek had a great method for getting rid of that grid pattern that you should definitely watch!
@BlenderMadeEasy
4 жыл бұрын
For business inquires check my email on my About page.
@blank141
4 жыл бұрын
Thanks for the reply 🙂
@moneyarab
Жыл бұрын
all day trying to figure out why simulation wasn't playing and when i tried it outside the room finally it worked so after watching this vid I realized the room i was trying to play the simulation in had the normals on the outside and sim wouldn't even start. Huge help thank you
@immineal
3 жыл бұрын
Oh my god, this was sooo helpful I struggled for the last 3 hours trying to fix my simulation when I would have just needed to turn up the Substeps! THANK YOU!!!
@ultrakawaii4000
4 жыл бұрын
Thank you, this made my day! Didn't find a solution for days and increasing the surface thickness resolved it :)
@RylnX
3 жыл бұрын
really thanks man really thanks you solved my all problems if you dont here i will not do mantaflow simulation. Thanks.
@ahadmazhar4154
Жыл бұрын
omg I was having a weird issue with a tube leaking fluid and nothing would fix it, but your fix of increasing the surface thickness solved it immediately! THANK YOU SO MUCH!!
@hbert06
3 жыл бұрын
Thank you! 👍🏼 It did not fix my problem but at least now I know where it comes from. Another thing to mention for fluid sims with mantaflow: I never got a proper result when I tried to use real life sizes. I had to make a 60 cm wide cup to be able to 'splash' the fluid in a realistic looking way.
@Mich_Angel
4 жыл бұрын
Thank you so much, this was great, just what I needed for one of my fire-smoke explosion that was not working and I couldn't figure it out.. now it is working just fine.
@gastonveliz1769
4 жыл бұрын
i been struggle with some of this problems, and i'm so grateful with this video, THANK YOU
@isabellegazan2
9 ай бұрын
So fun, I was attending your Udemy Mantaflow course, paused to make a google search, found this video. Then I started the course again and you explained the same :D Your course at Udemy is amazing, thanks !
@dillonthomas5495
3 жыл бұрын
This is perhaps the most helpful mantaflow video I've seen posted on the web. THANK YOU!!!!!!!!!
@BlenderMadeEasy
3 жыл бұрын
Glad it was helpful!
@PaulPaul-uf9ns
3 жыл бұрын
Never been baking so musch as now! Seems to be a problem with the simulation a lot. This video is great help. But still a lot of problems.
@haydens1716
4 жыл бұрын
Thank you!!! This has solved issues I have been running into for over 3 days. Subscribed.
@pisciano87
4 жыл бұрын
Hours watching a lot of videos without my currents problems and you made it easy!! Thanks a lot!!
@BlenderTutor
4 жыл бұрын
Great tutorial! I've been having fun messing around with mantaflow, but have def run into some of these issues before
@BlenderMadeEasy
4 жыл бұрын
Great to hear! Btw I really enjoy your tutorials! Keep it up!
@matbrady123456
4 жыл бұрын
I haven't started using Mantaflow yet, but watching this first I feel suuuuper confident. Thank you so much!! Liked.
@BlenderMadeEasy
4 жыл бұрын
Glad it was helpful!
@Akiruu_Sama
2 жыл бұрын
Hi, as many people down here in the comments I was so much lost in fluid simulations errors. I watched a lot of tutorials, but they never explain thoses kind of stuff. So I would like to great you for this great video ! As the name of your channel, thanks to you it's really easier now !
@dinoschachten
4 жыл бұрын
Very nicely laid out! I would argue that bringing up the surface thickness is not always a nice way to go as it makes the fluid not touch your collision object anymore, but your explanation is very helpful to understand glitchy behaviour. :) More often than not I think it comes down to creating realistic objects (nothing in our world is 2D after all) and bringing up timesteps as you mentioned.
@morafiee226
3 жыл бұрын
Thx! My collision problem is gone! Looks way better!
@lonotattoo
2 жыл бұрын
2 days wondering why fluid doenst collide with objects, thanks man!
@batmobile5550
4 жыл бұрын
Thx! I was trying to make a river and I didn't know how to make an obstacole for the water. Thank u very much!!!!!
@flipnap2112
3 жыл бұрын
experimenting with blender. been using Maya since V1 (for my job) and Fusion for fun. also an old after effects guy. Problem with blender and learning is that they change so much with every iteration people get confused by watching tutorials online. example, it looks like they already changed 9:23 for the "bake all" part, from "type:final" to "type "all".. not sure why they would change something like this, when "final" made perfect sense. not entirely blenders fault, its just that people are following older (and by older I mean maybe months ago) tuts that are outdated and not working. this program is SERIOUSLY trial by fire. I've spent so much time doing tutorials over and over and over just trying to get a result. its a bit overwhelming. When I first started using fusion it was predictable and results were the same every time. they barely changed up the important things (UI and UX stuff) and it gave some continuity to learning.
@twistedparticle425
3 жыл бұрын
You are so right. Finding the right tutorials is really time consuming with blender because of all these videos of older versions on youtube.
@BlenderRookie
4 жыл бұрын
Thanks dude, that solved an issue I had several times and couldn't quite figure out what was going on. My inflow object was too small. Subbed.
@TheDJkarsy
4 жыл бұрын
Hello, thank you for this video! I am having problems creating a fluid sim running through a pipe where the liquid seems to hover above the surface of the inside of my pipe. Even with no surface thickness it seems to hover over it :( I've tried everything you've suggested in this video and more!
@razz6539
3 жыл бұрын
did you ever find a fix for this issue ?
@TheDJkarsy
3 жыл бұрын
@@razz6539 Hmmm, that was a long time ago but if I remember correctly pumping up the resolution size helps create smaller fluid particles. But of course that increases bake times. I would suggest getting Flip Fluids if you can afford it, I have been using it since and it is much better but it is pricey.
@826keerthan9
Ай бұрын
Your video appeared like a life saver for me..... Thank you❤❤❤
@gianlucagoku
3 жыл бұрын
Is fun to see how u solve all those problems, It would be even better if that solutions were enough to fix my simluation problems
@efrainprimero4859
2 жыл бұрын
You rock!!! I was so stuck and didn't realize that I needed to bake the data in order to see the fluid flow! Also thanks for the advice on increasing the surface thickness - who knew?!
@michaelgeorgearabic
4 жыл бұрын
Most useful video ever! You answered the questions in my mind :) Blender crashes during baking. I wish you talk about this in the next videos. Thanks again for this tutorial. You're great
@notaboutfeathers2839
4 жыл бұрын
When the inflow objact was too small compared to the domain sth that usually fixed it for me was too turn up the resolution of th simulation. Thank you for the great video it truly is a big help.
@HartmutNoerenberg
4 жыл бұрын
very nice .. these are really the issues that you run into pretty often.
@mulanmiller5000
3 жыл бұрын
Finally I was saved! Thank you so much - I was lost in so many tutorials…
@melbendigo
3 жыл бұрын
You helped me keep my drink from going through my cup! Thank you! :)
@fazearbaax6083
3 жыл бұрын
Thankyou brother. This video cleared all problems that i was facing in Mantaflow. Thankyou so much ❤️
@Liingworth
4 жыл бұрын
Such a great video! I was looking everywhere for an updated tutorial on how to keep fluid inside an object, and it was just by chance I saw that you addressed that in this video! Thank you! :)
@MAGAMAN
3 жыл бұрын
This is the first blender simulation video where the person who made it seems to actually understand how it works. Everyone else is basically just copying everyone else. Never trust anyone who tells you they are a guru. They are lying.
@aztechnology.blender
3 жыл бұрын
Thank you so much. It really helped me!
@GabrielsLogic
4 жыл бұрын
Holy crap thank you so much. Your are the only channel I found explaining this well thank you so much I really appreciate it.
@AlienD09
4 жыл бұрын
Thank you for making this video, other youtubers that are most popular, dont even mention this stuffs, that it seem are crucial for making simulations. Valuables stuff !
@BlenderMadeEasy
4 жыл бұрын
Glad it was helpful!
@bobdobs8855
Жыл бұрын
This was terrific! Thanks
@lenkagamine9092
Жыл бұрын
this is amazing i had no idea i was making my flow object to small. 0.100m didnt wanna work and it was driving me nuts.
@thechannelitrollwith1645
4 жыл бұрын
Just for other people in the comments: For easy visualization of normals that people don't use too often in tutorials, you can turn on the Face Orientation check box. Blue faces are outside, red are inside, and it's super quick to see.
@thelazyhuntress
Жыл бұрын
bro, this video is a GODSEND Thank youu 🙏🙏🙏
@emidiobattipaglia
4 жыл бұрын
At 5:54 you can turn the tickness of the object to 1. the more you increase it the less problem you'll have with particles spilling out.
@ammadejaz93
2 жыл бұрын
Love you man... You just solved tons of my problems
@benmaydan6331
4 жыл бұрын
Thank you so much for this video, it’s very helpful! Although I do wish I found it a couple of hours ago when I was debugging what was wrong with my simulation
@benmaydan6331
4 жыл бұрын
I’ve been trying to learn blender from scratch and this video is extremely helpful
@paulojose7034
4 жыл бұрын
Thank you very much, my fluid didn't work. Now it works !!! I thought it was a Blender 2.83 bug.
@biblegeezer7844
2 жыл бұрын
Brilliant! Addressed a lot of collision issues I had been having problems with. Thanks 😀
@kokoze
4 жыл бұрын
Why didn't you mention the "Is Planar" checkbox when you talked about meshes that don't have a volume/are flat
@techsobserver
3 жыл бұрын
Can you explain please?
@JohnAldred
3 жыл бұрын
I was wondering that, too.
@ep8778
4 жыл бұрын
Thousand of thanks !! you give answers for common problems in blendering simulation 👍👍
@StuSutcliffe60
4 жыл бұрын
@Blender Made Easy thanks a lot. Trying to make a text a domain to fuel with liquid and didn’t show the particles. Will try this settings! Thank you!
@dwillingham
4 жыл бұрын
Thank you so much! I was having so many issues with mantaflow and this solved all of them!
@shadow_dancer
3 жыл бұрын
Thank you for such detailed explanation of all this problems and their solutions. This is really helpfull !
@vikasmayekar13
4 жыл бұрын
You know what.... You are a Fucking Genius..... Not because you know what you know....Its because you know what people do not know
@angeloferminodossantos5092
3 жыл бұрын
You awesome man, it helped so much to understand better the functionality and bugs of these simulations
@bluegemphotos1614
2 жыл бұрын
Magnificent video. This is a keeper
@christianrabie344
4 жыл бұрын
Thanx so much for this video. There is one dumb thing i cant figure out and that is how do you change the liquid mesh that you bake, from the particles (the blue, green and red dots) that you see in 1:09 to the solid liquid mesh you see in 2:53. Will appreciate any help you guys can provide! Cheers
@christianrabie344
4 жыл бұрын
LOL figured it out, I didn't check the mesh box.. Everything working fine now
@foxyfujitora3868
4 жыл бұрын
took 1 week for me to find this video, thought my computer didnt support lol, thanks a lot man ;D
@Khan-yy8qw
4 жыл бұрын
Could you go over how to setup everything for render view? smoke and other similar particle effects don't show up in render view but work for others.
@MrVilboux
3 жыл бұрын
Really nice compilation. Thanks alot!
@blenderinthegrass
4 жыл бұрын
I'm not seeing a "Bake" button in my Fluid pane. Everything else is the same as on your screen, except there is no Bake button, but there is a checkbox for "Delete In Obstacle", which doesn't seem to appear on your screen. This is driving me crazy!
@raghavgupta1118
4 жыл бұрын
OMG THANK YOU SOOO MUCH MY COLLISION OBJECTS WRENT WORKING IT WAS THE NORMALS!!! SUBBED
@BlenderMadeEasy
4 жыл бұрын
Thanks for subbing!
@raghavgupta1118
4 жыл бұрын
@@BlenderMadeEasy lmao didnt expect you to reply
@TheSoapThatCan
3 жыл бұрын
So useful! This is exactly what I was looking for and helped with my problems. Gold video!
@philosophyfrog2653
2 жыл бұрын
Extremely useful video 5/5
@WigWoo1
2 жыл бұрын
I don't even have the bake button under my domain objects settings
@arqitype
3 жыл бұрын
huge help and relief. thanks!
@SpurlinCinema
3 жыл бұрын
You sir are a miracle ❤️
@powerdrive1075
3 жыл бұрын
Thank you so much! Could you create a pause and stop water animation Tutorial?
@BlenderMadeEasy
3 жыл бұрын
I like that idea! I'll look into that! Thanks!
@tclcstudio4070
2 жыл бұрын
After 3 years of problems with fluid simulations in Blender, i thought this video was the solution and... it still doesn't work. Thanks for false hope.
@rhomis
2 жыл бұрын
2:57 Raising the Surface Thickness to 0.2 stopped the leaking from happening in my coffee mug mesh. Thanks
@nocaster89
4 жыл бұрын
Thank you so much, you just saved me a lot of time and frustration
@aaronspesard9572
3 жыл бұрын
Thanks, this is great and the timesteps tip helps a lot.
@frizzipazzi3600
4 жыл бұрын
Omg thank you! I spent like 4 hours today on those problems and the only help I found was on a 2008 blog post (not really amazing...)
@uzairbukhari99
4 жыл бұрын
Thanks for the solutions. I had some of the mentioned issues.
@cholasimmons
2 жыл бұрын
Fantastic man, thanks. However, how can I create a liquid simulation that begins with a container already full of liquid? Rather than beginning with the simulation of filling it up
@kimera3151
4 жыл бұрын
Thank you for running into problems so we don't have to :)
@JotaJotaCasa
3 жыл бұрын
This video is SO informative. Thank you!
@fungsmanz8058
3 жыл бұрын
this os the best video ever thanks you so much for this
@user-os2pp6fg4h
Жыл бұрын
thankss, you have saved my time
@parmindersinghsandhu1212
3 жыл бұрын
thank you sir. It was very helpful
@KingKiloOfficial
4 жыл бұрын
Dude, this was an absolute life saver. Instant subscribe.
@astridsteiner5206
4 жыл бұрын
Great video! Really helpful stuff, I have learned a lot from your videos. I have been trying to simulate a giant wave that breaks and crashes - without luck. I haven't come across a tutorial on how to create big crashing waves, maybe that's something you'd be interested in exploring? Thanks for all your great work!!!
@sikhostudio
Жыл бұрын
it's really help me mate. thanks a lot
@erosion01
4 жыл бұрын
When I use smoke noise the noise will phase through objects. It's not like the old way where it kind of subdivides the smoke making it a higher resolution.
@seismicgasbag
4 жыл бұрын
If your domain is being rendered in the final animation/picture, try keyframing when its rendered. Just random advice I wish I've heard days ago lol. Great vid though by the way, very helpful.
@rusticagenerica
2 жыл бұрын
Very precious advice. how do you to his precisely?
@BILZA
3 жыл бұрын
Thank you so much for this video. I really appreciate it. You help me a lot THANK YOU 👍👍👍
@BamBttv
2 жыл бұрын
Hey, at 7:00 you can see that the fluid doesn’t touch the solid… how do you fix that ? Thanks 😋
Пікірлер: 487