You are the most cheerful model builder that I have come across so far. You sound like you really enjoy the challenges that can come with building model kits. Thanks for the smile.
@nutillion9334
3 жыл бұрын
This is so amusing! I could watch this for HOURS!
@mattterrell4304
3 жыл бұрын
I have been lol, all his videos are great
@nutillion9334
3 жыл бұрын
@@mattterrell4304 I agree, i wanted to buy one but for shipping it is double price!
@nutillion9334
3 жыл бұрын
so i can only watch and watch and watch! which is not as bad as it seems!
@mattterrell4304
3 жыл бұрын
@@nutillion9334 I ended ho buying the discovery and enterprise-e thanks to him
@nutillion9334
3 жыл бұрын
@@mattterrell4304 Nice
@georgemacgregor5437
4 жыл бұрын
I love what you did. I did one about 2 months ago and lit mine up also. What a lot of people don't know is that you can sand a polish LEDs to fit anywhere on any model and as long as you don't sand too close to the electrodes in the LEDs you can make them fit anywhere. I did mine with a little more LEDs all done with armature wire to save room and a got a pretty good looking model for such a small size. Yours looks great. Waiting for the larger kit to appear so I can really go crazy on the lighting.
@AdnanCucak
4 жыл бұрын
You made LED's so simple and basic to understand, im going to give it a shot!
@nutillion9334
3 жыл бұрын
And did you manage?
@AdnanCucak
3 жыл бұрын
@@nutillion9334 yep!
@nutillion9334
3 жыл бұрын
@@AdnanCucak Wow Good job!
@witeshade
3 жыл бұрын
Thanks for this video! I bought this kit on a whim while I was a store buying parts for my 1/350 tos enterprise, and it's awesome to see a build guide and some details on it.
@cudathehawgjetfixer7520
2 жыл бұрын
On your decalling, try Walter's Sol-a-set for those really stubborn decals, and maybe Microscale Microset or Testors Decal Set before you place the decals, these will help with those large decals that have been given in the newer Star Trek models.
@mattterrell4304
3 жыл бұрын
I just bought this because of this video, thank you
@azbbguyz578
4 жыл бұрын
I just got my model of the Discovery in the mail from Amazon. I am SO looking forward to working on it. It has been YEARS (like 20) on doing anything like this. After suffering from a TBI (Traumatic Brain Injury (Dural Sinus Septic Thrombosis (97% fatality rate)) and tearing the tendons & ligaments in both hands, I need something to help restore my dexterity and improve cognitive functions. Always being a fan of Star trek, one of the ship models was a 'no brainier' to help do just that. No matter how it turns out or what it looks like, I'm going to be proud. And thak you for this video. It will help me SO VERY much in my recovery. Hmmm...Maybe I should rename mine the USS Recovery ;)
@nutillion9334
3 жыл бұрын
Get well!
@graemel3069
3 жыл бұрын
Awesome Review and build...well done Sir!
@spartanman0666
4 жыл бұрын
The USS Discovery is basically a Giant Pizza Cutter
@OldManTheseDays
3 жыл бұрын
You have what sounds like a very ticked off cat around the 53:00 mark 🤣
@odesseus
4 жыл бұрын
Thanks for the build video! It was very detailed and your result was an excellent model. This will be on the list to build!
@frankwire4348
5 жыл бұрын
I gotta say that while the Crossfield class is not my favorite by a mile - this kit and your build make me want to build one. I'm not sure I agree with you that "I'd" want a larger (more expensive) version but a little one like this that seems pretty packed with the appropriate detailing... I'm in.
@AvengerII
5 жыл бұрын
Doubtful they'll market another kit anyway. Most people haven't seen Discovery, it's beyond a paywall/streaming service FEW people want to pay for and the few that have seen STD generally don't like the show if they've seen and appreciate classic pre-2009 Star Trek. At this point, CBS has to virtually PAY the licensees to make anything related to STD since the post-2009 Star Trek projects have been colossal merchandizing failures The toys based on the 2009 and later movies have NOT sold well -- the designs don't resonate with people and what was made was not designed well and built with quality plastics. The JJ-Prise is a European-exclusive model kit marketed by Revell that had to be imported. The ONLY JJ-Trek model kit officially released in the US was the USS Franklin from Star Trek Beyond and I'm sure that it didn't do that well because it was associated with a box office bomb that many people didn't like. That's the problem with merchandizing. People with disposable income generally want to buy product associated with TV shows and movies they do like. Post-2009 Star Trek despite high box office has not inspired people like Classic Trek did. The same has happened with merchandizing associated with the Star Wars Sequel films. It just doesn't sell because the people who buy these things really don't like the films all that much.
@generalsci3831
4 жыл бұрын
Well, I've been looking for new Trek models to build after being out of the hobby for a while and I think this video made up my mind that I'll try my hand at the Discovery. :)
@charlesalmada4486
3 жыл бұрын
i just go mine. put it together its ok snapping together might be a tuff one
@iprovedthem5527
Жыл бұрын
This looks great, I've been wanting to do a lit up starship for a while, but have no experience. The lighting setup on this is simple enough I think I can do it as a first try.
@lenf2
4 жыл бұрын
I built the original Enterprise and the original Klingon ships in the mid 1960's and I think I much prefer a LARGER scale. Beyond that, could they POSSIBLY have made an UGLIER Enterprise? This looks more like a KLINGON ship than a Federation ship.
@stevenwheaton874
3 жыл бұрын
That's a very nice model. 👍
@jefferyyoung2580
3 жыл бұрын
I love the uss discovery 😍❤
@InterstellarModeler
5 жыл бұрын
Nice job....the lighting looks great too. Thanks for sharing.
@jefferyyoung2580
3 жыл бұрын
I love the uss discovery 😍
@jefferyyoung2580
3 жыл бұрын
Wow you're so awesome 👌👏
@ughmodels4059
5 жыл бұрын
For the decals.. Next time try a mildly hot rag and press the rag on the decal and it will help "mould" the decal to any seams/ detail better.
@scottfirman
5 жыл бұрын
That's what Decale solvents are for. They snug down decales to hug the details better. Solveset works best. Any model worth is salt can tell you that. A bottle will last you a life time on models that size.
@alanhobday9556
Жыл бұрын
or use the micro sol that he had there already and waiting
@joed3357
5 жыл бұрын
I have heard that they are making a larger one but no time table on when that's coming, I just starting building this one. Loved the video. Thanks.
@MoltoBene1240
2 жыл бұрын
Love the build, you've given me some good ideas for my kit I'm currently working on. Question: I've lost my display base and downtube! I'd like to do something similar to what the kit has, except with a hollow tube where I can run my electrical wire through and put a switch down below on the base itself. As I search the web to find a similar base, any suggestions as what to fab up? Best ~Pete
@scottfirman
5 жыл бұрын
On that small of a model SMD LED's would have been a better choice. I have enough that came off a cheap toy helicopter that would be more than acquit for a model that size. If you can use a soldering iron SMD's are the way to go. Advanced model builders like myself would even go as far as lighting the Discovery name and number. Even adding blinking navigation lights could be added using a RC plane lighting kit. I have 6 kits I bought for both planes and models. I prefer magnet wire on the small kits like that. I would even remove the doors on the hanger bay and open that up and add a box to fit inside to make a hanger bay and light that also. Even small kits like that can be lit. I think easier than large kits myself. Again SMD LED's would be way better than 3mm LEDs.
@mikemac2888
4 жыл бұрын
Would make a good parts model to kit-bash a big Millennium Falcon model.
@EddieLopez711
5 жыл бұрын
Nice job.................... would love to see a bigger kit will have all in 1/350 scale when they are released.
@matthewpoe1056
5 жыл бұрын
A 1:1000 is coming. 28 1/2 inches long
@trevormalcolm4328
3 жыл бұрын
Absolutely love the Discovery, I can’t find this model kit in the U.K.
@jefferyyoung2580
Жыл бұрын
Cool picture, yes do it does like pizza cutter
@ironboy73
5 жыл бұрын
Yes Sir, ...Thank You!
@stevenbalekic5683
4 жыл бұрын
Not sure at the moment with the pandemic and China's agression and trade problems. But there are pre wired micro leds that will fit just about anything. They are tiny and very bright. Can be used to light up a hot wheels car realistically they are so small. Also the price would be comparable.
@dbroadwayvfx
5 жыл бұрын
Great video. Thanks!
@dalestrange5817
3 жыл бұрын
I personally love to see some of these tiny kit done in 1/537 or 1/350th scale for some of us old farts with old eyes, lol.
@jefferyyoung2580
3 жыл бұрын
Did you know guys this was the ogin enterprise in star trek 2 1970
@klttrll
3 жыл бұрын
Ima bout to buy this and commit flying saucer
@PhuVet
4 жыл бұрын
Round 2 developed a light kit but after they got stuck with the kits they didnt go into production.
@milanondrak5564
3 жыл бұрын
Looks like a Klingon ship disguised as a federation ship for clandestine operations.
@markbernero9302
5 жыл бұрын
I'll wait for a larger version since I already have the Eaglemoss version which is close to the size of this model.
@FishBoyBlue
4 жыл бұрын
How long do we have to wait?
@yellowjacket996
4 жыл бұрын
Man, looks great. Do you think it would be possible to use a superfine drill bit or a pin to open up the little windows and let the LED light shine through? Or would that not work?
@ptaylor5014
5 жыл бұрын
Very nicely done i like it :)
@tiberiuskirk8690
5 жыл бұрын
I think it looks great but, this is me just being nitpicky, if you watch the show the deflector dish is white not blue.
@timrose9826
2 жыл бұрын
nice
@xenokarasu
4 жыл бұрын
How long do I have to wait for a decal to dry? This is my 1st build ever so I got stumped after snapping the pieces together and then not knowing how to put the decals on thinking at first that they were simply like stickers! xD And is the transparent circumference of the decals supposed to stay showing like that?!
@odesseus
4 жыл бұрын
Decals don't take long to set, meaning they are no longer moveable on the surface on the model, anywhere for a minute or so. They will take a full 24 hours to fully dry and adhere to the model, though. It's usually advisable to spray a clear coat over them to protect the decals, but that's completely optional. As for the transparent edge, yes, that is typically still visible after the decal is applied. Many modelers trim the decal very close to the printed part to remove that edge using a sharp hobby knife so it doesn't show. It's a lot of extra work, but many consider it worth it. Again, totally an option. Have fun!
@MEATLOAFr
5 жыл бұрын
that's a lot to sit thru... but worth it
@nerdhobbies5865
5 жыл бұрын
what did you do to mask off the bussards
@Mmanifesto22
5 жыл бұрын
Beautiful. Wish I had talent to build a light up ship for myself. Do you sell any of your completed models?
@jefferyyoung2580
2 жыл бұрын
I love star trek discovery ships 🚢
@nerdhobbies5865
5 жыл бұрын
Any particular colors and brands you used?
@nerdhobbies5865
5 жыл бұрын
Did you get 2 packs of clear parts on your box?
@vergilioneto
3 жыл бұрын
ONDE COMPRA AMIGO ??
@Carrierbuilder406
5 жыл бұрын
Did he not see how think those decals are? They look more like stickers. No amount clear coat could cover those.
@allscaletrek
5 жыл бұрын
Better than nothing. There is always the option to paint the detail or print custom ones. : )
@Joepacker
3 жыл бұрын
No thanks I'll pass on the pizza cutter.
@ah7910
3 жыл бұрын
You are a very talented model maker. But jeez, such a ridiculous ship - just doesn’t fit with anything. SecretHideOut really have no respect or reverence for what came before. Essentially they just did a visual reboot. I find it really insulting.
@SHONNER
3 жыл бұрын
Is there a 1:1000 scale model of this?
@allscaletrek
3 жыл бұрын
No kit is available in this scale. Just what is offered on the aftermarket.
@SHONNER
3 жыл бұрын
@@allscaletrek I bought the 1:1000 model of the USS Enterprise (from the STD series) from a model shop in my town just now.
@jefferyyoung2580
2 жыл бұрын
Not the story
@grantmiller6570
4 жыл бұрын
I like your enthusiasm but for me, the Discovery design is awful.
@usedcarfactory7522
2 жыл бұрын
great work on you but this is a pathetic design for a ship.....abomination
@beebopvroop5218
4 жыл бұрын
Dude, you made a mess of those decals- particularly on the underside of the saucer section. You rushed the application using tweezers to apply them then totally missed the obvious creases when you did eventually use a cotton bud. It could have looked so much better.
@christopherh4653
4 жыл бұрын
I like the TV Show, but this is one of the worst looking ships there is.
Пікірлер: 83