At 15:54 in the Numerics & Simulation Control chapter, the current default 'Relaxation type' settings are set to "Manual". You can keep it as default and proceed further.
@hrkalita159
3 жыл бұрын
One of the best tutorial 🙏
@SimscaleSimulation
3 жыл бұрын
Thank you very much!
@hrkalita159
3 жыл бұрын
@@SimscaleSimulation please make some more tutorials 😋,I am waiting
@SimscaleSimulation
3 жыл бұрын
@@hrkalita159 Check out our Channel! More such tutorials were recently added.
@MH-ce2io
Жыл бұрын
Can you please explain the velocity table setup. You mentioned 3 degrees angle of the attack and ramp up from 6ms to 115ms. It is not clear to me how those values entered in the table represent angle of the attack and ramp up to final velocity of 115m/s.
@MH-ce2io
Жыл бұрын
I figured it out I did realize that wing was facing in the z direction
@SimscaleSimulation
2 жыл бұрын
It is possible that some of the features are now obsolete or replaced with new ones. We apologize for any inconvenience. Please follow our tutorial documentation webpage in the description for the most recent version. Thank you !!
@rudranshmishra22
7 ай бұрын
BESTTT
@annafergi4077
2 жыл бұрын
Where did you make the model?
@Surajkokani125
Ай бұрын
If you got to know please convey me too. I am also interested in making of the model :D
@kenbhatti3621
2 жыл бұрын
can I simulate sonic and subsonic airflows over a body? such as aircrafts or a rocket
@SimscaleSimulation
2 жыл бұрын
In order to simulate sonic/subsonic flow, the compressible solver can be used: www.simscale.com/docs/analysis-types/compressible-fluid-flow-analysis/
@kenbhatti3621
2 жыл бұрын
@@SimscaleSimulation Is setting up the study quite simple or will it take a lot of time? I have cad files of my designs I want to study.
@Surajkokani125
Ай бұрын
@@kenbhatti3621 how did you make designs please let me know!!
@parasghumare8067
Ай бұрын
@@Surajkokani125 Designs need to be done in a CAD software. SimScale allows modifications to the CAD geometry under 'Edit CAD' to make variations of the CAD model.
@ADARSHSHRIVASTAVABAS
2 жыл бұрын
best
@AwesomeRiya
2 жыл бұрын
Can u tell reson for slecting tht vel value
@SimscaleSimulation
2 жыл бұрын
You mean the components? No specific reason. It is not far from the average plane speeds. It is high enough to be considered a compressible flow simulation.
@kamai346
9 ай бұрын
Can you run 2d simulation on this
@parasghumare8067
Ай бұрын
For simple geometries we can run a 2D simulation. The model has to be 3D but very thin and the two sides need to be defined a slip wall boundary conditions or periodic or empty 2D depending on the analysis type.
@TheJustinJ
2 жыл бұрын
20 minutes in, and still had no idea what he was trying to accomplish up to that point. Make a model in cad Import model Make a simple box around it Define the airflow conditions Run the sim. Then delete first 2/3 of video.
@JousefM
2 жыл бұрын
Hey Justin, nice to see you here! How would your ideal tutorial look like? :)
@TheJustinJ
Жыл бұрын
Shorter in length. An overview of the process, and various steps involved. Then a step by step demonstration. Probably edited down to the minimum talk required.
Пікірлер: 24