#Configure on Switch
- Configure etherchannel ( Gi 0/21-22 )
- Configure Trunk mode and allow access vlan 10
interface Port-channel2
switchport trunk allowed vlan 10
switchport mode trunk
!
interface GigabitEthernet0/18
description /* Port Channel to MT Router */
switchport trunk allowed vlan 10
switchport mode trunk
channel-group 2 mode on
!
interface GigabitEthernet0/19
description /* Port Channel to MT Router */
switchport trunk allowed vlan 10
switchport mode trunk
channel-group 2 mode on
!
interface Vlan10
ip address 192.168.10.222 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.10.1
Негізгі бет Configure Ether-Channel on Cisco Switch Part2
Пікірлер