This is a phenomenal video - it's so clearly explained. Truly one of the best videos I've seen on pfSense VLAN's! Great job!
@TechMeOut5
2 жыл бұрын
Wow, thank you so much frank! Much appreciated indeed!
@somerandomguy8564
2 жыл бұрын
Best video I've found on this subject! You clearly explain what needs to be done and walk the viewer through the process. Really appreciate the level of detail you went into. Thanks for making this video!
@TechMeOut5
2 жыл бұрын
Thank you very much. Glad it was helpful!
@joeyp978
2 жыл бұрын
Dude this is awesome. Thank you so much. Great tutorial, great breakdown of everything. You rock
@LimpTicTac
10 ай бұрын
One thing I'm confused about is your firewall rule for the SERVERS network. If the first rule allows connections out to everywhere except internal address space why would you need another rule to deny communications to IoT network? Wouldn't the IoT network use the already blocked RFC1918 address space from the first rule?
@waichan2613
2 жыл бұрын
In this case, it needs a management switch to assign ports for different services. Am Iright ?
@QuikTechSolutions
2 жыл бұрын
Excellent video Avi! Very detailed and well explained. Always a pleasure!
@TechMeOut5
2 жыл бұрын
Thanks for watching Tony! Much appreciated indeed
@DB-xx6ec
Жыл бұрын
Oh my god, I have tried for so long to get my head around VLANS and you have just nailed it for me. I cant thank you enough for your help!
@Beaird_IT
9 ай бұрын
Question for the workstation VLAN. Because of the double NAT how would you allow the workstation VLAN to have internet access?
@MegaNatebreezy
9 ай бұрын
At 19:00 why do you need a second rule for the block from servers network to IOT network? Doesnt the alias FW rule already block that because the IOT vlan would full into the listed IPs? It seems unnecessarily redundant?
@stampeder1686
Ай бұрын
This is a great video!! My question is how did you setup you management vlan. Does it connect to the lan port or to one of the other physical ports? Thanks.
@bme7491
Жыл бұрын
I can put my printer on it's own VLAN. However, I can't get my PC to see the printer (PC driver uses IPP).
@greywolf7983
11 ай бұрын
When I do this, my devices are obtaining IP from the parent and not the vlan. If I turn parent off, nothing works. What settings did you use on parent to make the vlans take over the dhcp?
@maxmeier532
Жыл бұрын
Could I just create the vlans on the switch and then pfsense will recognise different vlans and route them? It would be easier to have them on the switch and directly assign them to their respective ports?
@DIYLifeCheapAndFree
Жыл бұрын
אין מצב שאתה לא ישראלי חחח
@abdoulnassiroukarimouamado3672
4 ай бұрын
Hi I have vlan created on my switch core and it is this switch which does DHCP server how to add existant vlan on pfsense
@bobdeitz7641
Жыл бұрын
This takes me where I need to be in setting up the firewall for my church! Thanks for a very informative video!
@TechMeOut5
Жыл бұрын
Glad we could help!
@shetuamin
Жыл бұрын
Ahh. I can save huge time If I saw this video years ago.
@costenalolek973
2 жыл бұрын
What about wifi devices? How to configure, that all the IOT wifi or guest wifi devices, will be added to IOT VLAN automatically?
@TechMeOut5
2 жыл бұрын
What do you mean? It depends on the wifi access point and switch you are using
@costenalolek973
2 жыл бұрын
@@TechMeOut5 One AP, but I want that all my family phones go to my private network, lets say LAN, but all my IOT devices or guests phones want to go to IOT VLAN.
@blkrazorback1970
Жыл бұрын
I am not getting internet traffic on my 3100. The steps were followed as directed. i am hesitate about tagging because it will lock me out of box. It seems to be most confusing. The lan 4 is used to login 3100. So would tag all vlans to port 4?
@vincecorona1992
Жыл бұрын
If the Default Gateway given by PFsense DHCP server is pointed at the vlan interface IP on FW, wouldn't that mean if clients need to communicate between VLANs for non-internet bound traffic (ie. pc_client talking to servers) that the PFsense would have to do the routing and is less in performance than if the L3 switch did the routing?
@1965kings
Жыл бұрын
How to set up the switch for clan is missing?
@seeker-of-knowledge-777
2 жыл бұрын
Thanks for the tutorial. It's still not working for me though. I have a Cisco SG300 switch set to Layer 3 with all VLAN's configured. I setup the same VLAN's on the pfSense, but I'm unable to hit the Firewall. I'm able to hit the default gateway of the VLAN, but not the pfSense Firewall. I'll keep tinkering with it.
@Basillic
9 ай бұрын
Nice to see an in depth guide to this Pity he used /24 subnets. I'm gonna run in trouble with virtual gateway IP's within more restrictive subnets.
@globerunning1437
3 ай бұрын
I am a newbie in networking. Very helpful bud!
@TechMeOut5
3 ай бұрын
Glad you liked it!
@acerides1724
2 жыл бұрын
All is missing is assigning the vlan tagging on the switch right? IE, vlan 2 = priority 0 ? Since you prioritize 0 to all, is that means all traffic from different vlans get top priority?
@umalivealeatoria5474
Жыл бұрын
Why did you use 172.16.vlantag ??? at 06:56 . shouldn't you use 10.100.vlantag ??? Can I create a totally new ip there? and it will be the ip that will appear to the person? Thanks in advance
@TechMeOut5
Жыл бұрын
What?
@umalivealeatoria5474
Жыл бұрын
@@TechMeOut5 I've just created the VLAN at pfsense, and at TP-link L2+ switch i attached to the vlan by mac address, did the ipconfig release and renew, showed the right address. But can't connect to the internet. I've copied your vlan ipv4 address, could this be the problem?
@TechMeOut5
Жыл бұрын
Hi your questiom is unclear and sadly, it looks like a far too elaborate topic to be troubleshooting with a comment on youtube video. With all willingness to help...
@bme7491
Жыл бұрын
This helped me get my VLANs setup and working...thanks.
@TismoGaming
Жыл бұрын
Any chance you could a video for opnsense? Specifically Vlans and rules for home network protection.
@d3mist0clesgee12
2 жыл бұрын
great video bro, just inherited a pfsense box on my new job, lol, this really helps me out, can you please add video on rules please, thanks again. Also adding two separate sites if you can, meaning connecting to two different devices from ISP two connect the two sites from across town, thanks again!!
@d3mist0clesgee12
2 жыл бұрын
and you do video on connecting two or multiple LAN's on PfSense, new to it, thanks again.
@andonizamora562
Жыл бұрын
You saved my life. Thanks for this excellent explanation. 💜
@luizhp
Жыл бұрын
Hi my friend. Thanks for the video.
@yasaralzakout7691
Жыл бұрын
great work and awsome explination, Thank you a lot.
@5thpixel
10 ай бұрын
well done
@mikecaldera2912
2 жыл бұрын
I'm subscribed after you saved me! I had the exact same error you had only I was thinking it was my Nic cards not being vlan aware! Silly me, I guess I thought I did everything correctly but when no dhcp lease IP was given for the newly created vlans that was driving me crazy. "pfSense by default always tells us do not add two gateways,"... well this time it's different. That's a bug that needs to be fixed. I was checking for bad cables, nic card vlan aware, ports connected snugly, and basically not my settings :) Thank you for picking up on this since no other person found this "bug." pfSense V2.6.0-RELEASE (amd64)
@TechMeOut5
2 жыл бұрын
Thanks for watching buddy!
@globerunning1437
3 ай бұрын
Thank you. Well explained!
@TechMeOut5
3 ай бұрын
Glad you liked it.
@gecmisinisevenadam3971
Жыл бұрын
Thanks bro. You have solved my problem :)
@jyambao
2 жыл бұрын
What is your setup in manage switch to used this setup
@michaelcooper5490
Жыл бұрын
Excellent video great job. Thank you so much.
@TechMeOut5
Жыл бұрын
I'm glad i was able to help!
@Furriee
2 жыл бұрын
Great explanation, I appreciate the time for preparation and creating this video. Thx.
@TechMeOut5
2 жыл бұрын
Thank you for watching!
@lankiraci
Жыл бұрын
I have never seen a video with such a successful explanation about creating a pfsense vlan. Thanks
@TechMeOut5
Жыл бұрын
Glad i was able to help
@johnrichardson3757
2 жыл бұрын
Nice! Thanks for this video!
@flaviobordoni9590
Жыл бұрын
Great video. It helped me a lot. Thank you very much.
@TechMeOut5
Жыл бұрын
Glad to hear that!
@rpsmith
2 жыл бұрын
Thanks! Good video!
@painkiller895
2 жыл бұрын
great video !
@michaelemmetti752
Жыл бұрын
Great video - End to End!
@cliffprescott3112
2 жыл бұрын
Thanks for this video man!
@TechMeOut5
2 жыл бұрын
Thanks for watching!
@AviDarks
Жыл бұрын
אחלה סרטון, כל הכבוד.
@AviDarks
Жыл бұрын
שאלה, hp microserver הוא יכול להריץ pfsense? ניסיתי לעשות בוט מ-usb לא נתן. במקביל אני שוקל להתקין את pfsense על proxmox אבל לא בטוח לגבי החיווט של הרשת
Пікірлер: 69