facebook: / agusvargasyt
Instagram: / agusvargas1
Pioneer Direct Sub Drive
FREQUENT QUESTIONS:
Q: I have a different brand radio / stereo, can I connect a subwoofer?
A: The function shown in the video is exclusive to Pioneer (Pioneer Direct Sub Drive). Check the manual of your radio / stereo or googlea.
Q: What is the beginning song called?
R: It's called Bass I Love You by Bassotronics
Q: What is the name of the song where you test the subwoofer already connected?
A: It's called 90 Days Without Bass by Bassotronics
Q: What model is the stereo / radio of the video?
A: It's the Pioneer MVH-X375BT
Q: If I connect the subwoofer can I keep the rear speakers?
R: NO When the subwoofer is connected, the rear speakers are canceled
Q: If I have 2 subwoofers of 4 ohms each, can I connect them one at each rear output?
A: Yes, if you can without problems.
Q: Can I connect my 4-ohm dual-coil subwoofer, 1 coil on the violet wires and the other on the green wires?
A: If you can, although the power would be lower, it is recommended to connect both coils in parallel to the Violet cables.
Q: If I have 2 subwoofers of 4 ohms each, can I connect them together in the violet output?
A: Yes, if you can, you must connect them in parallel, (+ with + and - with -) the result will give 2 ohms between both subwoofers, which is the requirement to connect a subwoofer there.
Q: I have a simple 2 ohm coil subwoofer, can I connect it?
A: If you can, only in the Violet exit.
Q: I have 2 6x9 "inch speakers / speakers installed Can I use them in subwoofer mode?
A: If you can, some 6x9 "speakers / speakers give very good bass response, I have acquaintances who use them to complement the bass with the function, it will not sound like a subwoofer does but you will notice the difference.
Q: Can I connect a speaker on the output of the green wires and the subwoofer to 2 ohms on the Violet?
A: No, you can not
Q: I have a Pioneer screen stereo, can I use this function?
R: Of course, if you can
Q: How do I know if my Pioneer stereo brings the function?
A: Do the steps of the video to enter the initial menu, with the stereo off, press the volume button and then go to the "INITIAL" menu then select Speaker Pre Out (SP / PO in some cases) and when you enter there should appear the following options: REAR / REAR (full range of sound in both the speakers and the RCA, in some cases the RCA output is disabled), Rear / SubW (Full sound in the speakers, Subwoofer in the RCA output), SubW / SubW (Full sound in front speakers and Subwoofer in the rear exit).
If you found the SubW / SubW function your Pioneer stereo is compatible, I recommend you consult the manual or google your model for better detail.
Q: I have a front media set, with this procedure can I install a subwoofer in conjunction with my front media set?
A: It will be much better if you have front media set, that's ideal.
Q: I have a home subwoofer, can I connect it?
A: Definitely not, they are different impendancias the house and the design for car.
P: You're crazy right, how are you going to connect a subwoofer to the stereo, you're going to burn it !!!
A: The stereo comes ready to be able to connect a subwoofer without any problem, as long as you do the steps properly as it should be, you will not have problems.
Q: Is something wrong if I do not activate the subwoofer mode when I connect it? Can I leave it direct? I like how it sounds!
A: Yes, you can burn the stereo output, if you do not activate the Direct Sub Drive function in the initial menu.
Q: What subwoofer do you recommend to connect me?
A: Definitely a Pioneer of 10 "or 12", or any other subwoofer with good sensitivity, if it is greater than 90db it will sound much better, it is a matter of reading the specifications of the subwoofer you have chosen.
Q: Will my car battery discharge faster if I activate this function?
A: NO, it will continue consuming the same energy as if you were bringing it with nothing more horns. If you use it too long with the auto off then you can download your battery as it would in any case.
Q: What is the purpose of the REV function in the subwoofer menu?
A: To reverse the polarity of arrival to the coils.
Q: What can I do if I want to keep my 4 speakers / speakers and connect a subwoofer?
A: In that case, you will have to install wiring and amplifier to power the subwoofer.
_________________________________________________________________
Business Contact (For Bussines Inquiries): agus.vargas_@outlook.com
Негізгі бет Connecting a subwoofer without an amplifier | Pioneer Direct Sub Drive | Configuration
Пікірлер: 1,2 М.