MP3/Bluetooth module with 4,3" LCD screen with video support - ali.pub/4hx5na
MP3/Bluetooth module with 4,3" LCD screen, built-in amplifier 2x50W+100W and video support - ali.pub/4hx683
(The module has a video input, i.e. if you want you can connect a TV set-top box. The disadvantage is that there is no FM-radio)
MP3/Bluetooth module with b/w screen - ali.pub/4hx6qd
Cheap (~200r) MP3/Bluetooth module - ali.pub/4hx7f2
Class D Class 2.1 amplifier 2x50w+100w subwoofer - ali.pub/4hx5ti
Class D Class amplifier 2.1 2x160w+220w subwoofer + Bluetooth - ali.pub/4hx5z5
TDA7269a chip - ali.pub/4jtnrw
Interesting and inexpensive 1DIN stereos, including those with rearview camera and steering wheel remote (delivery from Russia is available!).
Head unit №1 - ali.pub/4hx7m9
Head unit #2 - ali.pub/4hx811
In this video I talk about how to bring to your home theater (using Elenberg HT-115 as an example) 5.1 channel sound. The thing is that inexpensive devices line input allows you to connect only stereo, and digital ports work only for output.
While I was loading video (my Internet is not very fast), I found out that the device goes into hibernation in the absence of the disk. The problem was solved by disconnecting the DVD-drive (the flat cable on the right when looking from the top, the thin flat cable coming from the head must not be disconnected). The controller writes "open/close" on/off sound, then on again and the monitor goes off. If you turn the volume, the "U_" symbol stays lit permanently, the amplifier works without falling asleep.
Негізгі бет Ғылым және технология Connecting an old home theater to PC/
Пікірлер: 346