I made this panel sled for cutting plywood that was too large for a cross cut sled. Then found the panel sled was also very helpful for cutting dado and tenon on long pieces.
Design was inspired from July/Aug 2008 FWW magazine article by JOHN MCCORMACK, who in turn got the idea from the Program in Artisanry at Boston University. www.finewoodworking.com/membe...
Sled shown in this video is made with a 1/2" MDF base measuring 34 x 48 inches. The fence is about 2-3/8" x 1-3/8". Adjust dimensions to suit your needs.
00:00 Introduction
00:30 Make the sled
04:14 Five Cut method
13:45 Cutting Panels
14:50 Cutting Tenons
17:05 Cutting Dado
Smaller version of same style sled: • Versatile CrossCut Sle...
Clip on infeed support: • Clip-on Infeed Support...
Micro adjustment of fence to cut runners: • Micro Adjustment of Ta...
Locate mortices on a curve, as used on bed in Panel sled video: • Mortice on a Curve
How to use Bed Bolts, as used on bed in Panel sled video: • How to Bed Bolts
My Channel: / @steven.woodward
Негізгі бет Тәжірибелік нұсқаулар және стиль Construction and Use of a Table Saw Panel Sled ( also great for Dado and Tenon)
Пікірлер: 102