Huge thanks to BetterHelp for sponsoring our video! Use betterhelp.com/perkins to get started today! If you have any questions about the brand relating to how the therapists are licensed, their privacy policy, or therapist compensation model, check out this FAQ: www.betterhelp.com/your-questions-answered/
@ironman12328
2 ай бұрын
NOPE
@TubaFaah
2 ай бұрын
You guys are big enough that you REALLY need to be vetting who is sponsoring you. BetterHelp is a NOTORIOUSLY horrible company and I'm honestly disgusted that you think it's OK to push these companies without ANY background vetting. Go back to pushing tools where there is no risk of people actually dying from a bad product.
@Marco-ip5cw
2 ай бұрын
dont take betterhelp sponsor ships
@GodsAndIdols
2 ай бұрын
BetterHelp is an instant unsubscribe. Not ok.
@Unknown-pl5mb
2 ай бұрын
Cant believe you fell for the betterhelp scam
@alextv-lu8sc
2 ай бұрын
As a little tip, next time try to cover the upper joints of the first layer of thermal insulation with the second layer so no weak spots can arise here. A little recommendation from Germany. Love your content!
@MrCjallaby
2 ай бұрын
Yeah I was disappointed they didn't stagger the joints.
@ramellesmith1520
2 ай бұрын
I feel inadequate, Brock’s bringing so much more to his build than I could 😂. Glad he has tools and mahteeriuhls to help you all out so much! The lunch scene, too funny and absolutely took me back to lunch with crew during the Modern Retirement Home build! Thanks to Jaime for helping me figure out a good time for us to come on site for the little celebration for y’all’s big achievement - sorry I spoiled the surprise for you. You all are the best!
@louie-ami
2 ай бұрын
It was great to hear you were onsite! I hope you are enjoying your new home!!
@ramellesmith1520
2 ай бұрын
@@louie-ami - thanks and very much a yes to enjoying my home. Though it’s taking longer to get it all together than I had hoped.
@locke3141
2 ай бұрын
@@ramellesmith1520if it’s anything like my new home, you’ll be unpacking some things two years later. 😂
@Hobocreekfarm
2 ай бұрын
You are probably one of the best customers anyone could ask for.
@ramellesmith1520
2 ай бұрын
@@Hobocreekfarm - that’s so kind of you to say ~
@ronlovell5374
2 ай бұрын
Risinger is very correct, you guys should use a dimple barrier. Delta or DMX has some very affordable large rolls, which provide great drainage from walls to weeping system, as well as maintaining a life long air gap to keep sub-grade moisture build-up at bay. Its just smart and super cheap insurance. We use it everywhere in Canada. It should min code in all jurisdictions in North America.
@coralboy7428
2 ай бұрын
When I was a project manager we always place the bituthene horizontally. Start at the bottom then overlap the next sheet just like roofing felt or a wall membrane.
@rchauser57
2 ай бұрын
Amazed and impressed with the amount of physical labor y'all do. Hat's off from a lifelong office worker. Never miss an episode.
@mikekassan2435
2 ай бұрын
In colder climates like Minnesota where I live, it's better to insulate on the outside of basement walls. Two reasons: thermal mass and in the spring and early summer, the ground is still cold and I've seen condensation between the inside basement wall and fiberglass insulation. The insulation keeps the basement wall warm and prevents any condensation from forming.
@stevehadden3662
2 ай бұрын
Here in the uk, we put a soft sand down under the membrane to stop it getting perforated by the sub base.
@hectorhugomendez5507
2 ай бұрын
we do the same in Cali U S A, we do use gravel if it's called for like around pool decks also in the mountains.
@Spooky515
2 ай бұрын
Here in Iowa, we use pea gravel in our basements for the base.
@Bias2310
2 ай бұрын
If the gravel is smooth enough and the plastic thick enough it won’t puncture. If it would it wouldn’t be a problem….
@arfski
2 ай бұрын
I was thinking the same, where is the sand blinding under that damp proof membrane! I do enjoy these videos but the lack of insulation and number of thermal bridges they have is hilarious from a UK perspective.
@vangeezerexperience
2 ай бұрын
Why do anything? If you have any water penetrating material under it, the water will not flow in the pipe/french drain...
@larserikengholm
2 ай бұрын
I was very happy to hear that you support mental health, as I struggle quite a bit with it myself
@simfoo
2 ай бұрын
Here in g'old Europe outside xps insulation below grade is standard for new builds. We usually do the full waterproofing using a bitumen-based paste, then glue the xps sheets over that using foam or more bitumen and then (as Matt said!) a layer of dimpled membrane to protect the insulation. The modern membranes are three-layered, inside is a sliding layer to prevent earth movement from ripping on the sheets, middle layer is the membrane (dimples face away from the wall) and the outside layer is a filtering fabric that allows surface water to drain quickly while preventing clogs.
@Superwoodputtie
2 ай бұрын
This method is common in the US too. I think there are a few differences. Because our warmer winters (in the southern US) don't kill off all the insects, ground boring insects like termites and Ants can be a problem. Some types of exterior insulation systems work really well in colder climates, but have to be tweeked in the south because insects will bore/nest in the exterior insulation. Some insulation like Rockwool/stonewool are insects resistant, while certain foams require additional protection.
@DrMJJr
2 ай бұрын
I wish they’d use cap fasteners because that zip tape isn’t the best adherence to hydrostatic pressure
@Davor_gradnja
2 ай бұрын
Something is very wrong with that since the dimples should be facing the insulation. You were putting it wrong for some reason. You can easily google it.
@simfoo
2 ай бұрын
@@Davor_gradnja it actually depends on the situation. If you need a (and have one) drainage, facing the dimples away from the wall is the better approach. As mentioned, it should then have a filtering fabric attached to prevent clogging. If all you need is mechanical protection facing the dimples towards the wall can be ok too. But only with an additional sliding layer that prevents them from grabbing and tearing the insulation sheets when compacting the dirt.
@simfoo
2 ай бұрын
@@DrMJJr it really only holds the sheets until backfill comes and presses them against the wall. I think every hole in the waterproofing layer is one too many. Relying on self-sealing properties is a bet I wouldn't take
@rhondakennedy819
2 ай бұрын
My guys!!! Be kind to each other. Stay safe. Love to all
@JohnYates-w6t
2 ай бұрын
For your MEGA project I would recommend you utilize "running dimensions". Find a point that translates from the foundation to the roof and make that point 0,0. As you go across the page, add the dimensions and at each dimension extension line write the accumulative value. If you take the time to do this for every single dimension, both in the "y" axis and the "x" axis, it will save you tons of time and heartache. I would be happy to provide you with an example.
@Nauris_L
2 ай бұрын
Stays in the soil for 30 years. what could go wrong with that, we have never ever messed up with other chemicals. :D
@TheGreatestJuJu
2 ай бұрын
Yup, that’s crazy! Also, spraying that without a mask 😮 💯% micro droplets are being breathed in. No smell, we must be ok…
@Natedoc808
2 ай бұрын
It’s likely just Boric Acid. So inert to humans, but crawling pests hate it.
2 ай бұрын
@ 3:30 when the job is finished you should take those very used and dirty blueprints and frame each page individually and present them to the home owner as a gift.... you wont believe how special of a gift that will be...
@williambenner5531
2 ай бұрын
Mega congratulations on hitting 1 million subscribers…I don’t remember how long I’ve been watching, but it was a ways before Jamie’s accident. I remember how courageous and accepting he was and how he chose to bear down to keep on keeping on. Another more recent moment was participating in and seeing the unbelievable retirement appreciation showered on Arlo. Though that gift was directed to Arlo, it feels like a clear thank you to the whole crew, the way you work together and the great content you produce twice per week. PBB is always my 1st channel to check for new chapters and the channel I talk most about with my friends… Someday…Bryson City, Cardinal Coffee…maybe a chance to say Hi…till then…thanks…A MILLION!!! 🎉🎉🎉
@peterwalsh6867
2 ай бұрын
Look into slingers , it would deliver the drainrock at the pipe with no wheelbarrowing , Peter
@Symuality
2 ай бұрын
"Talk to me again like that on camera and you'll be underground" - legit laughed out loud hahahah 11:07
@jefff6167
2 ай бұрын
Yeah, that was a window into the “real” relationships.
@maarrky
2 ай бұрын
@@jefff6167 I think they miiiiight have been joking around Jeff, don't worry about it lmao
@joshuarivard2355
2 ай бұрын
@@jefff6167 Nothing is ever real eh?
@jmazoso
2 ай бұрын
We always design French drains with a full burrito wrap, you can get mud migrating in from all sides. Besides, you’re going to burry it, it’s not like you can go in and fix it. I’m in the midden if doing one for a motel right now.
@Natedoc808
2 ай бұрын
Sounds like a Mexican drain ;-)
@firemanj35
2 ай бұрын
I have a question why do you run the bithutain vertical instead of horizontal? Less joints to worry about. I'm just curious. I would have log cabinet the corners too.
@thomas0753
2 ай бұрын
Observation and Question: one of the main benefits of something smelling bad (especially when it is bad for you) causes a natural "I should wear a mask or stay away from it" vs no smell and a false sense of security. If it is a chemical that kills bugs, and stays on the surface it dries on for 30 years....should wisdom prevail and wear some level of PPE? Love your channel and want you and your families to enjoy you being around to the fullest!
@johnmclaughlin7633
2 ай бұрын
I do a lot of ComChecks at my office and boy are they a good time. I do mostly commercial work, but the IECC does have prescriptive values for insulation base on climate zone. This includes foundation walls. Also, i probably would have staggered those joints vertically as well as horizontally. The dimple board is really beneficial to help alleviate hydrostatic pressure on foundation walls. Probably would have been a good idea to incorporate given the rain and the houses location on that slope.
@SarahKchannel
2 ай бұрын
Make a drawing box / table, just a make shift thing, with a piano hinge and a lexan sheet to cover the drawings, then you can use board markers to make your notes. While protecting it from wind and rain...
@Feelalive1009
2 ай бұрын
❤
@fuegoman45
2 ай бұрын
Nice to see Romelle make a cameo ❤️🤙
@ramellesmith1520
2 ай бұрын
@@fuegoman45 - thank you!
@niceverden9313
2 ай бұрын
Glad you showed the Termite pre-treat, cool to see how its done over there. Australia has significantly more requirements for Termite Protection. We do plastic collars around drainage before slab is poured that key into the slab. As well as physical sheet product around the external perimeter. Older houses get a Termiticide Treated Zone around the perimeter. Thanks again for a great video
@jlabo1958
2 ай бұрын
There should be a exterior perimeter treatment done when it's completed, after the "final grade is done", which is required by most states and most labels, which would be cool to see on camera.
@SobagAdventures
2 ай бұрын
Geotextile fabric / petro-mat. We use it to prevent reflective cracking on asphalt. It's place with hot oil adhesive on too of old asphalt and sandwiched with a layer of new asphalt.
@SobagAdventures
2 ай бұрын
Jaime take over! Need more. Maybe a day in the life/ behind the scenes outside work. Awesome stuff as always!
@isaacfink123
2 ай бұрын
Just finished an 18-hour work day. This is the perfect way to wind down and relax
@GCubedProductions
2 ай бұрын
What a great visual of impact on the Community. Romelle (sp?), former client, comes to celebrate 1M subscribers.
@mattmyraj
2 ай бұрын
Fairly new subscriber- I think what I’m most impressed by you guys is how you point out others’ good ideas and so intentionally build up the guys on your crew. What a great encouraging and honoring work environment you create! Learning a lot (building my own house currently) but just as blessed by your top notch videos.
@Kristina_Australia
2 ай бұрын
It's going to be interesting how long this build will take. What is great, the homeowner will have this to reference back to, but see the journey. Well done guys
@brady_morgan
2 ай бұрын
You should be using a 10-15 mil poly for the sub-slab vapor barrier, the extra thickness keeps it from being punctured easily from working on it. Also, do you guys not have radon concerns in your area? Typically you would want to tape all the edges and seams to prevent radon seeping into living space.
@-_James_-
2 ай бұрын
They mentioned before this build is in a high-radon area. As you point out, that plastic will offer zero protection against that. (But that said, the American way of letting radon out through a pipe in the roof is just weird anyway. Radon is heavier than air, so in a windless area or on still days that radon will just flow out the pipe in the roof and down back over and into the house.)
@TubeSurfer26
2 ай бұрын
@@-_James_- whats the american way of getting rid of radon?
@-_James_-
2 ай бұрын
@@TubeSurfer26 The method I've seen used in the past involves putting a sealed plastic barrier down in the basement with a pipe that then runs vertically up through the house to a vent in the roof. The idea being Radon (that's heavier than air, remember) can only escape up through the pipe. I'm sure that's not the only way they deal with Radon, and obviously that wouldn't work in houses without a crawlspace. In this build if I were doing it (and I'm a software engineer, not a builder, so anything I do will be seriously over engineered), I would have started with a Radon barrier under the walls they've cast (concrete is not airtight, remember). I would then have sealed and wrapped the outsides of those walls with a radon barrier behind the insulation, and continued it under the gravel and pipes they've put down so there's zero possibility for Radon to enter any part of the house in the first place. That safe room they're building will just fill up with Radon without serious ventilation to circulate the air continuously.
@Kevern70
2 ай бұрын
The radon system has access into that area below the vapor barrier. It is powered with a fan to create a slight vacuum underground where the radon is, and exfiltrate it outside the house.
@jimclester4754
Ай бұрын
Watching your video , with my morning coffee .
@sarahbarton4100
2 ай бұрын
Try the Expol EX1300 Hot Wire polystyrene cutter - cuts the polystyrene without all the mess being created by a saw. I love watching you guys work, all the way from New Zealand 🇳🇿!
@2times2is4
2 ай бұрын
We actually use a plastic 4x8 pre stamped piece that attaches to the inside of the form before you pour. Works very well. I'm in Cincinnati Ohio and that's how we do it . Looks great when painted. Like wallpaper.
@michaelleinen1949
2 ай бұрын
Oh you released a free video for me to watch? Thank you.
@PerkinsBuilderBrothers
2 ай бұрын
You bet!
@hotseat2
2 ай бұрын
The fabric for the french drain is called geotextile.
@justinmanship5431
2 ай бұрын
There are also a couple kinds. I’d recommend a non-woven geotextile.
@zaneyoumans2923
2 ай бұрын
I love the Starwars swipe transitions between shots. I don't know why but it's very enjoyable.
@anwarwilliams8370
2 ай бұрын
Thanks for building with us "Chase!" 🎉💐🇺🇸📿✨️
@-_James_-
2 ай бұрын
If you don't protect that external insulation, nesting insects will just burrow into it and destroy it over time. Also seeing as your insulation bats don't have lapped edges the outer plastic layer will prevent water from seeping in between the joints.
@LisaMantha-v6g
2 ай бұрын
Yes, video in the new office finally . 👍👍👍👍👍👍👍
@donfielder2830
Ай бұрын
When applying plastic sheeting vapor barrier over gravel you should use 8mil plastic. Preferably vapor barrier should be continuous however any overlap should be 24” in addition vapor barrier should be continuously sealed to foundation wall.
@mikeallensonntag
2 ай бұрын
Congratz to the 1mill, thanks for building.
@loro3849
2 ай бұрын
I went to school before calculators and i often used the method described here as "flow math". I love it!
@Doogle81
2 ай бұрын
What an epic build!!!
@schweetmunkie
2 ай бұрын
Part 17 and the foundation isn’t poured!! Damn you, Perkins brothers! You have me hooked!!
@JohnJordan-qj3yb
2 ай бұрын
I,m not a builder but in the UK on top of the gravel base we use what is called a blinding of sand to protect the D.P.C. from being punctured.
@surfart5448
2 ай бұрын
so evident you guys are all family
@RatelLaw
2 ай бұрын
Thank you for sharing your expertise
@ericwallace3123
2 ай бұрын
Not sure if it’s a tip or not but with your poly and getting little holes in it. We use road crush here not gravel, it gets super smooth and packs super hard and you never have to worry about accidental holes
@justinmanship5431
2 ай бұрын
I did 2” rigid foam and then the vapor barrier. Get the benefit of under slab insulation and a smooth layer for the vapor barrier.
@1kadaywithact
2 ай бұрын
Luv you guys, but on the exterior foam insulation putting 2x4 sheets together leaves a seam for the next set on top of the first 2x4 set. Wouldn't it be better to start with 2 2x4 first application, second layer start with 2x2 foam panel to offset the seams? Just thinking out loud.
@Dono-eg6cg
2 ай бұрын
Love your channel ! Congrats on 1,000,000 subs. You guys work hard,u deserve it !!! God bless u guys....work safe
@jesseseidel294
2 ай бұрын
Can’t wait for the framing to start. Keep up the good work gentleman
@Grampafox
2 ай бұрын
Had an acquaintance build a house out of lumber he picked up at the dump that had been used as concrete forms and it was cheaper to throw it away than pay someone to clean it up. That was about 50 years ago 😂
@Lieutenxnt_Dxn
2 ай бұрын
Just sold a spec house mid construction that also had a speakeasy hidden behind a wall of bookcases. New owner decided that wasn’t enough and wanted to also make it a cigar room so we are currently looking at smoke eaters. Gotta love construction.
@poolhustler6
2 ай бұрын
I have built many huge high end homes here is Los Angeles and my current project is the very first one with a "Speakeasy" ....
@AshRoq
Ай бұрын
Great job!
@wandaking4229
2 ай бұрын
Back when I made that mat at Phillips Fibers they called it Petra Mat. Pretty sure smelling those Fibers heated was what kinda messed up my lungs. I enjoy watching your videos. Keep up the good work.
@Eathanevl
2 ай бұрын
In the UK we have to put a layer of sand between the gravel and the membrane to prevent the issue you showed.
@AhAh-h8m
2 ай бұрын
Hello Perkins crew! It's always a pleasure to watch your amazing content. I am curious. What would be the final building cost according to your pricing?
@afzulali7695
2 ай бұрын
Hi there, outstanding videos, in the United Kingdom we put a sand blinding over the sub base and then lay the vapour layer it stops any punctures
@justinmanship5431
2 ай бұрын
That’s a good idea. I used rigid foam since I wanted an insulated slab but it also creates a very nice surface to lay your vapor barrier.
@SteveWille
2 ай бұрын
Since the purpose of this perimeter drain tile is to collect and convey, I think it should only have holes on one “side” (possibly several rows) and be installed with holes up.
@macgyver03ga
2 ай бұрын
Holes down. Water will rise into the pipe and because the inside of the pipe is an area of lower concentration vs the higher concentration outside of the pipe, the water will push through it to daylight.
@SteveWille
2 ай бұрын
@@macgyver03ga Interesting and non-intuitive… this seems worthy of letting Jamie talk.
@justinmanship5431
2 ай бұрын
You want the holes down.
@Kevern70
2 ай бұрын
Third. Holes down.
@JorenMathews
2 ай бұрын
I love the exposed concrete look. Great choice.
@milesharlan1
2 ай бұрын
Happy Sunday morning guys! KUTGW
@w2ttsy670
2 ай бұрын
Max proving his value with that voluntary swap of barrow duties. Keep this man on your roster for sure!
@randymackintosh6559
2 ай бұрын
Congrats on the Million Subscribers!!! Always enjoy your content!!
@osbengdeleon3510
2 ай бұрын
Watching from the Philippines🇵🇭
@troyqueen9503
2 ай бұрын
Love the safety Crocs, wish they would make a composite version.👍🏝️🇨🇦
@genecreamers4480
2 ай бұрын
You guys should skim the inside of those walls with ardex TWP and spray a sealer like ardex CG.
@Aunty-A
2 ай бұрын
Wow!!!! A million subscribers!!!!! Congratulations!!!!!🎉🎈🎊🍾
@DustyAnimations
2 ай бұрын
Vapor barrier is for concrete to cure with the water in mix and not loose much to sub soil or aggregate, it also saves concrete in quantity and helps retain thin cement paste. Vapor barrier is not meant to moisture proof concrete.
@anthonydoan8020
2 ай бұрын
“I call Matt Risinger to get advice on several questions we had. But we chose not to do any of them.” Haha
@alanadair8890
2 ай бұрын
Appreciate the Chain story. Tell your wife...excellent gift. Also, tell Bryce's parents good job. Great to see his work ethic. Looks like he never hesitates to do anything needed.
@davidreed9046
Ай бұрын
That’s the first time I’ve seen a vapor barrier between the gravel and concrete. I’ve used drain tile around the footer. For basement water proofing, I used to do a liquid asphalt membrane with fiberglass board and pins using a Hilti gun. However, I never agreed with using the pins and hoping it self-healed, but our warranty covered it in the event of failure. I’ve never used bituthene.
@marigeobrien
2 ай бұрын
Brock should think about putting that boulder in the middle of his yard/garden when the house is done. Like a souvenir.
@mohedaicebear
Ай бұрын
Damn at this point Brock needs to start paying himself he's brought so much help to this project it's so cool to his skills and how that's sped alot of work up with the machines. Seems like a great guy no one deserves this kingdom of house than a hard working man like Brock.
@micahcristobal-miller8772
2 ай бұрын
You guys should do a imperial wall finish with vermiculite and concrete mix
@Z-Bart
2 ай бұрын
Pro tip for Ray: if you have to hand cut rigid foam insulation, a pull saw works way better than a dry wall saw.
@trevorhardy3544
2 ай бұрын
No. Use a utility blade and then break it like drywall by putting pressure right behind the cut. Works every time.
@Z-Bart
2 ай бұрын
@@trevorhardy3544 Maybe for a mid sheet cut. Ray was attempting to cut approximately 1/2".
@helend222
2 ай бұрын
Enjoyable to watch ..... always.
@jessiewilloughby5786
2 ай бұрын
We need a shirt with tournament math on it!!!! Also Jamie’s commentary while Eric was trying to get around the corner with the wheelbarrow had me laughing out loud.
@harryl7946
2 ай бұрын
23:41 😂😂😂😂 Looks like when family comes over! 😂😂😂😂😂😂
@wasdaletimelapse7658
2 ай бұрын
My tip for the geotextile would be to cut 2 foot widths of the end of the entire role so that you might have 100 metres at 2 feet wide. Easier to handle.
@FredD63
2 ай бұрын
Jamie, they make doors that are actually hidden. Looks like a bookcase. They are called Murphy doors just like the Murphy bed.
@barrymcmanus4956
2 ай бұрын
Love your show. Why did you put the drain pipe higher than the basement floor, rather than right down on the footer?
@hectorhugomendez5507
2 ай бұрын
Sorry it's just in Cali we have to be quick at those kinds of details because when your done if you can save the stake great if not, it becomes trash, but we normally use the steel stakes that have a bunch of holes down the stake, but sometimes we run out or we need more bite, and the steel stakes sometimes are to short
@tmoss7122
2 ай бұрын
Yay, a Ramelle cameo!!!
@jmazoso
2 ай бұрын
With Arlo, it’s like a double shot.
@ramellesmith1520
2 ай бұрын
@tmoss7122 - thanks! I had started planning it in my head at the 998k mark! I didn’t know how long it would take for them to get the official celebratory party together and wanted to make sure the 1 million subs mark was recognized! Grateful Arlo and PBB’s mom helped. The guys are the best, they made my home spectacular so they deserve extra attention and treats! Love ‘em to pieces!
@tmoss7122
2 ай бұрын
@@ramellesmith1520 that was so thoughtful and kind of you!
@ramellesmith1520
2 ай бұрын
@@jmazoso - so glad Arlo said he’d help with the celebration!
@ramellesmith1520
2 ай бұрын
@@tmoss7122 - it’s not hard when it involves PBB and crew! And bonus for me I got a PBB and crew fix!
@ulsterlad2256
2 ай бұрын
Love the crocs Jamie
@robertjolliffe2612
2 ай бұрын
In Australia we have metric mm. So easy when a wall thickens change. But I also know foot & inches as I’m soooo old I had both. Haha
@willfixthingsfordonuts
2 ай бұрын
Congrats on the Million. Now don't change...
@tomsnow9686
2 ай бұрын
Just a thought but could you have used the foam that you use between concrete and sill plate to cushion the pipes?
@danielrandolph9170
2 ай бұрын
Make sure yal wearing gl9ves when pulling them form boards they did get termites spray on them & if yal use them watch for the saw dust & your lungs ! Good video
@robertcookjr6100
2 ай бұрын
Interesting job!!
@robertbollenbach8534
2 ай бұрын
You may want to get with your electricians before you pour. They might want to run some conduit or put in some sleeves in so they can get the feeders to the panel. IDK if you are going to do any framing in the safe room but they might want to put in some ceiling boxes in there as well so everything won't be surface mounted
@gurumeditation4922
2 ай бұрын
Love your videos, entertaining as hell. But I have three cents: 1. I wouldn't mix the Bituthene layer with Flextape. Could be that the system still works, but using something like that in the non designed way leads almost always to problems 2. I would, like others already mentioned, glue the foam to the bitumen layer and let the single foam sheets overlap each other 3. There is currently no reinforcement for the concrete slab. Regardless if it's code or not I would use reinforcement because the ground is modelled and there will be for sure settlements Keep up the good work!
@jessiewilloughby5786
2 ай бұрын
Wouldn’t the foam deteriorate over time on the outside like that? I’m new to all this and just wondering. Love the videos
@davidellis5659
2 ай бұрын
It’s called a heat loss heat gain calculation to calculate the amount heat the building will lose based on construction material used as well as how much heat the building will gain(AC load) mostly based on windows solar heat gain which is then used to select HVAC equipment that will satisfy the load of the house (heat and AC)
@rauldiaz6115
2 ай бұрын
Hey Perkins, by code the French drain should be footing level not the wall FYI
@mikeallensonntag
2 ай бұрын
Jason is a boss for sure.
@mirzahusic5179
2 ай бұрын
Congrats on a 1 MILLION subscribers!!! Next stop.. 2 MILLION
@John_Locke_108
2 ай бұрын
I liked Jay's tip ripping that piece of wood on the saw horse. But what do I when my father-in-law asks about the hole marks when return his saw horses?
@Dan-K
2 ай бұрын
Jason had my wife (sitting across the room) and myself dying laughing at 20:00.
@rallycharly
2 ай бұрын
If they had a construction category at the olympics you guys would win gold medals!
Пікірлер: 483