25:07 Oh that makes so much sense I wanted to test if EMU works with FL Studio and I was so confused when there was no interface loading up.
@ifthenplay
9 күн бұрын
thank you for timestamping and pointing this out, it had me a bit flummoxed as well.
@wightclaudia
Жыл бұрын
You saved my bands life. I have a show later this month and I’ve been going Grey trying to figure this out. I formally used DMXIS through Logic X on a MacBook. I no longer have the DMXIS box and my MacBook is now too outdated to be used with Emu. I went around in circles trying all of these other garbage lighting programs out there and hitting a wall until I found your video I think you might be the only guy on KZitem addressing simple program switching via midi and somehow I can’t believe that it’s that scarce on KZitem when so many bands need this stuff I’ve used logic for 15 years so I figured how hard could ableton be just for simple backing tracks with midi light programming around them so I got the 90 day trial which will afford me enough time to do the show I am also amazed at the lack of content / tutorials of substance from Enttec when it comes to Emu. All of this stress for some stupid songs. You’re the best 😊
@JulianGrayMedia
Жыл бұрын
so glad you figured it out!
@EverestStudiosOfficial
Жыл бұрын
Windows users - i downloaded “loopmidi” for the aggregate midi device and was good to go. Had the lights done for a 30min set the next day 🤙 and I’ve never done it before Windows 10- Pro tools - emu usb pro- emu program That’s all that was needed
@noexitnollaig
Жыл бұрын
fkn legend
@EverestStudiosOfficial
5 ай бұрын
@@user-el3sh1xh3t not sure I’m decently new to all this myself. I got our lights working the way i wanted and moved on 🙃 What’s the difference?
@traviscarrier3339
Жыл бұрын
Hi Julian, So glad I found this video! Your 1st video on DMXIS is what got me into doing lighting for my band! With the previous version (DMXIS) you were able to have multiple MIDI tracks, all with their own individual DMXIS VST running. With this I was able to make a track for each of the lights in my rig, this kept things clean and I was able to only have the faders I needed for that light configured and macro'd on the track. With EMU, it seems you can only have 1 track with an instance of the EMU VST attached to it. If you try to make a new MIDI (Or any track for that matter) and attach the VST, when you go to configure the sliders for automation nothing happens. The 1st MIDI track will still let you configure, but none of the others will. I had a work around for this, which was configure all of the sliders on 1 MIDI track and just duplicate the track, but it only allows for 125 faders to be configured, and I have about 278 faders in my rig. Just didn't know if maybe you had a work-around or had any ideas on how to fix this? I know the "best" way would be to link programs from EMU and trigger them with a MIDI note like in your video, but for some reason I was really comfortable just controlling all of my lights with automation lanes. Any help you could give me would be awesome! I'm kind of at a loss right now. Thank you again!
@Sir_Intranet
Жыл бұрын
That track is fuego 😩🔥🔥
@Lamorn
Жыл бұрын
Thanks for this video man it's very well done! I've been diving in to this a bit to set up some stuff for a smaller lighting setup for some shows next year, and randomly stumbled across this. Very helpful stuff. Hope you are doing well :)
@JulianGrayMedia
Жыл бұрын
funny seeing you here! Glad it was helpful brother!
@StormBurnX
11 ай бұрын
totally did not expect to see Lamorn here but now I gotta ask - did you end up giving this a go, and did it work out for ya? What kind of solutions do you usually use for this kinda stuff?
@aromiuniverse
Жыл бұрын
Amazing Julian! Thanks so much for this. Super helpful as I'm trying to wrap my mind around building my lightshow for Aromi... I may be using Ableton so I can trigger lights and video clips for my livesets... it's a huge jump from using FL Studio for the last 10 years. Anyways man major props and mad respect for you. I'm just amazed by how far you've come in the years I have followed you. You're a big inspiration! Keep up the great work.
@JulianGrayMedia
Жыл бұрын
Thanks for the kind words Aaron!
@MakesMyBloodDance
5 ай бұрын
This was excellent and detailed, thanks for making this
@HowiSpangler
10 ай бұрын
So helpful dude, thank you!
@JulianGrayMedia
9 ай бұрын
You bet!
@DJNAVENDU
Жыл бұрын
This is such an amazing thing but sadly dealbreaker for me is the subscription model of software. Id rather pay 3 times the yearly price and own the software.
@Sqeedledee
Жыл бұрын
Indeed hard no on subscriptions
@ItsWesSmithYo
Жыл бұрын
Well that answered my question from the 5 year ago video. Rad, thanks. NTW, Showsync still had the DMXIS as recommended hardware/setup in official docs. I shot over a message, but just FYI.
@laurilest
Жыл бұрын
Super helpful!!! Thanks!
@AntonioAlaniz
Жыл бұрын
Perfect video my friend. Well done.
@splitpeaks_music
11 ай бұрын
Great video Julian... Very helpful.
@llandonbroadhead6746
Жыл бұрын
Thank you so so much for this
@Essenger
Жыл бұрын
you're a life saver
@luisgarciarios4988
11 ай бұрын
Thanks a lot was wonderful!
@HotMenDance
9 ай бұрын
Dear Julian! Does it (EMU) work with Reaper midi device? Thank you!
@thibaultbesuchet807
Жыл бұрын
It’s terrifying how the time showing on the screen capture matches the time I’m watching this video
@JulianGrayMedia
Жыл бұрын
It's meant to be
@parkmedia
6 ай бұрын
Always cut the lows under 80Hz
@kazemzahedi1047
2 ай бұрын
Hi Thanks for the great video. I have a set of DMX512 LED pixel lights. These are plane basic fixtures. Can I use QLC+ to set the address of the fixtures, before I can use them
@onceuponagiant
Ай бұрын
Did anyone find how to internal midi route in windows
@freemiumbeer3072
Жыл бұрын
The software licensing for EMU is not good. Neither is the fixture definition system, as you pointed out. The free version has extremely limited fixtures available, and you can't add your own. So you have to sign-up for the subscription, then you have the full available list of available fixture definitions, and if the fixture is not in the list, you can ask Emu support to add it, which reportedly takes a week or so. I purchased the Enttec DMX USB Pro adapter and tried the free version out. I'm a new user, and wanted to demo it to see if it would work for me. But the free version is so hamstrung there is no point in even trying it out. Your fixtures won't work, unless they are Enttec or one of a few generic models. Why they decided this free demo version was a good idea, I'll never know. As a new DMX user just starting out, I'm not subscribing to software I can't even try out. For that reason, I'm going to pick something else. Ultimately I think this decision is going to limit their user base for this software, most likely to DJs that were already using Dmxis.
@Ultima2876
9 ай бұрын
Does the Open DMX USB Interface work for this?
@belugapromotions
Жыл бұрын
Could you make another video on EMU? I still can't understand how to save programmes, there's just so many updates.. I feel like might be missing a few steps..
@martindefatte219
3 ай бұрын
Does anyone know if theres a way that a Max 4 Live that can control this hardware device? I would love to use this on an Ableton Push 3 standalone, but it doesn't have VST support (it's version of Live is a port of Linux)
@LAGASTEST
10 ай бұрын
Amazing video! question, can you use this to animate addressable light strips?
@guy539
Жыл бұрын
some how my midi channel 2 changed to master output. how do I change back to IAC DRIVER? its not showing up
@chichaaronmex
Жыл бұрын
How about running wireless lights
@robertedenhofer390
Жыл бұрын
I'm having an issue when I bring in multiple lights that are the same type unit. They have different dmx addresses and work fine in emu but when I bring them in using vst they all get controlled by the same channel.
@Trust182
Жыл бұрын
Does this also work for Logic Pro x, for some reason I can't seem to get it to work?
@michaelsawczak5339
11 ай бұрын
We're you able to figure this out?
@poose
Жыл бұрын
Some of my lights are 5 pin and some are 3 pin. Can you still daisy chain them together with the proper 3 pin to 5 pin cables without issues? I also noticed that the Enttec DMXIS is 5 pin but the light in this video is 3 pin. So I may already know the answer just want to confirm.
@startrek0336
Ай бұрын
You can easily make adapters by wiring the according Pins together on each connector. Usually they're marked with numbers from 1 to 3/5 (1= Ground, 2=+, 3=-, so basically the same as audio XLR)
@nalee1
7 ай бұрын
Hey what the name of the intro song? Thanks
@user-tf6dw5pi8q
Жыл бұрын
I am new this software as well as dmx. I'm trying to add my two different Shehds lights to the EMU list. I just purchased the "DMX USB PRO" My ENTTEC download is in my "Programs Files" folder NOT "Programs Files (x86)" and there is no DMX LIBRARY Folder? Did I do something wrong in my download or is it because I'm on the 3 month free license trial? I really want to get into this software. Thanks in advance for any help or tips?
@buck960
Жыл бұрын
i tried this in studio one with the vst but didnt manage to get it working
@Ryu3sT1
Жыл бұрын
If you want to do proper PRO way and not waste time on learning limited software, check MagicQ. I use it with ENTTEC DMX USB Pro Mk2.
@Sqeedledee
Жыл бұрын
Now you got me intrigued.
@Jorickhoofd
11 ай бұрын
Many thanks for explaining some things the manual failed to address entirely! How would you go about controlling a 16-bit dimmable fixture through the vst or even through the main app? It seems like torture to manually automate the fine dimmer fader in accordance with the coarse dimmer fader? Is there a way to automate the intensity in a way that it automatically does both the coarse AND the fine control? In the newer pan/tilt widget it has the fine motor control embedded, but I don't find this happening when using 16 bit dimming fixtures.
@JulianGrayMedia
9 ай бұрын
I think it depends on your fixture!
@RACKSx3
Жыл бұрын
I've got the Enttec device with a breakout that allows for two universes. Any idea how to set my fixtures to a second universe?
@thales_stat
9 ай бұрын
Is the Standard version (USD 99) able to do all these things?
@JulianGrayMedia
8 ай бұрын
I'm not familiar!
@igorsim8170
Жыл бұрын
Hi. Thanks for video. I have purchassed Usb Pro and firmware on it is 0.0. When downloaded 1.44 Firmware Ia m unable to instal it. I have contacted Enttec but so far no luck . Just wondering if you had any issue with yours and possible solution. Thanks.
@adrianmichael8086
Жыл бұрын
Is there somewhere I can search to see if my lights are compatible with this software before buying it? I'm hoping to use this with Astera titan tubes
@WillieTheAutomaton
5 ай бұрын
I was so interested in this till I found out it was ANOTHER damn subscription. I just can't anymore man, this subscription shit is out of control XD
@eross21
Жыл бұрын
how would somebody go about using this with rgb LED tape lights ?
@JulianGrayMedia
9 ай бұрын
For LED strips you need universe control which is more involved than what you can do with EMU.
@guy539
Жыл бұрын
Can I do this with logic ?
@JulianGrayMedia
Жыл бұрын
Yes
@Capykiller
11 ай бұрын
Awesome tutorial. I got everything setup on my Mac with EMU and Ableton. Only problem, Ableton loses the automation all the time. I am running this in session view, using the VST plugin on one midi channel to trigger the banks the other one for the programs. I already mailed Enten and Ableton, they said the problem is too complex and I should look for some help somewhere else (which really upset me since I paid spent some money on the software). I need help very urgently, for we run shows every weekend and it is not working without resetting it all the time. Any ideas?
@opperhoofdrampeneer8324
11 ай бұрын
What do you mean by Ableton "loses automation"? Explain more in depth and I might be able to help. Do you mean the signal stops working? Or something in Ableton goes wrong? What EXACTLY is the problem?
@Capykiller
11 ай бұрын
Exactly, the signal in one or both midi channels turns white and doesn't work anymore, the lighting program then stops. One has two reset the automation with the back arrow in the toolbar.@@opperhoofdrampeneer8324
@muffamuffamuffa
9 ай бұрын
Same for me, did you fixed the problem? :(
@Capykiller
9 ай бұрын
@@muffamuffamuffa hey there, I actually contacted the Entech Support another time. They got back to me and told me that they found the issue I have with the automation, they will solve the problem and get back to me as soon as possible.
@Y8S
Жыл бұрын
I have the original one and a new MacBook Pro- can I run old software on my new Mac?
@JulianGrayMedia
Жыл бұрын
I'm not sure if DMXs works in rosetta or apple silicone
@Y8S
Жыл бұрын
@@JulianGrayMedia thanks for response- I’ll check it out and let you know
@pat4340
10 ай бұрын
Is there a way to use dmixis with a visualizer?
@JulianGrayMedia
9 ай бұрын
That's more of a resolume thing!
@cooterbascher
Жыл бұрын
Any recommendation for MIDI routing software for windows ?
@JulianGrayMedia
Жыл бұрын
Don't use windows 7 in 2022
@goronclemo7977
Жыл бұрын
Hi Julian! I've just recently programmed my first dj lighting show which went down really well. However, im limited to only being able to assign 16 faders in ableton to control the emu parameters. When i try to setup a 17th fader it doesn't show up. Do you know if this is possible and how I would go about that? I've got my second gig coming up and I would love to have more faders setup to further enhance the light show. Thanks! Goron
@0419210317
Жыл бұрын
That would be because you’re using the free version. If you’re using the subscription version, you get 512 faders with the VST3
@xujipampila
Жыл бұрын
It seems You're using Ableton Live Lite, which limits user to 16 tracks max. Upgrade to Suite
@brentjohnson4088
Жыл бұрын
I would not recommend EMU!!!!!!!!!!!!!!!!!!!!! i got the subscription and it will not work with Ableton on a windows pc. Not being able to make your own fixtures, no chanel mask and a subscription. I will just keep using my already paid for and still working DMXIS
@boristubeti6776
5 ай бұрын
How do you download it though 🥲
@JordanMottram
3 ай бұрын
How is dmxis still working for you
@d-trax-music
Жыл бұрын
Ok what's up wirh all that expensive "midi to dmx" converters. I've built myself one with an Arduino and one with an usb to rs485... Both of them are worth 15$ overall and are working flawlesly... Please stop buying this expensive crap and build your own.
Пікірлер: 81