Love the long format and the amount of info you provided. Thank you for all the time you spent on this. Most beneficial.
@evincent1969
4 ай бұрын
This is a fantastic and instructive video, you compile all the informations we want to know. Thanks for all of your efforts and I encourage you to continue!
@freelyroaming
4 ай бұрын
Glad you found it helpful!
@Wanderglobe
10 ай бұрын
Thanks for the video. Very thorough and clearly explained. I live on a sailboat and have been running Starlink through a 1000 watt inverter with 200 watts solar and a 200 Ah lithium. I'm at a marina with shore power for winter so 12V doesn't really matter right now. Still, it will make for an interesting project as I try to move a lot of my devices to 12V. It certainly was nice to fire up Starlink on a rainy day while anchored remotely and watch KZitem videos though.
@freelyroaming
10 ай бұрын
You're welcome. 200Ah can get eaten up pretty fast by starlink once that shore power cord is gone!
@chad914bantner
8 ай бұрын
We are in the same boat! Pun intended. We have Starlink running off our inverter but will convert to 12vlt DC with your help. 800amp hour house bank with 840 watts of solar
@espooge
4 ай бұрын
Excellent video. I cant think of a question that wasn't answered. Now just waiting on parts to do my conversion.
@freelyroaming
4 ай бұрын
Good luck!
@Mr_Low_Profile
4 ай бұрын
Your style and manner of demonstration and teaching is impeccable. Thanks for your effort, it's just right for us "middle of the spectrum" folks!
@cjbubeck
10 ай бұрын
Excellent, well researched information. Giving options is a nice touch. Comparison tests are very helpful. Thanks very much!
@freelyroaming
10 ай бұрын
Thank you. I've seen a lot of other video that just aren't as thorough so I felt like this was needed.
@thescurry
6 ай бұрын
This is a great video on 12v starlink conversion. Thank you!
@ozmanfidaar6311
8 ай бұрын
Nice! It's good to have options, particularly on the off the shelf products--the route I'll take and just an extra unit in case of failure. Thank you. I liked and subscribed for the algorithm.
@AussieTracks
6 ай бұрын
Fantastic video. I’m current travelling using Starlink through inverter but after viewing your video will convert to 12 volt including the smaller modem. Well done!
@thewanderingshores
3 ай бұрын
This was exactly the video I was looking for. Great job and I'm more than happy to subscribe with quality like this. Thanks, Wander On- Kyle and Michelle
@JayP-Luna1
6 ай бұрын
Well done explanation and step by step, especially appreciate the tests done at the end. Best KZitem video on 12VDC conversion yet! I like the idea of using the Dishy Dualie but forgoing the Yaosheng adapter and simply cutting the Starlink cable and swapping 3&4 and 5&6 and creating a standard RJ45 pinout to go into the Dishy Dualie. Then I can cut the cable shorter for my van flag mount and create a second longer cable for use when there are trees or other obstacles to be avoided.
@wjohnhill
4 ай бұрын
Amazing, simple-but-detailed video for the fairly-sophisticated DIY candidate. I was looking for ways to set up my Starlink for an Airstream application, and I think this will work. Looking forward to trying it out! I am NOT going to reduce the length of the Starlink cable however, because campers like me often need the additional length to allow me to place the satellite dish where there is access to open sky.
@freelyroaming
4 ай бұрын
That's why I also have an unaltered second full length cable.
@whatarewedoingouthere
9 ай бұрын
This was really helpful! Thanks for putting it all together. 🤗
@ZuluGoatHerder
2 ай бұрын
Such great content, delivered clearly with great time lapse of power usages. Cheer mate
@Iamdebug
9 ай бұрын
I may have missed you mention this but Tyco makes a direct 12v to POE injector so you don't need to have a separate boost converter. Model TP-DCDC-1248G-HP. We used variants of these at solar power sites
@freelyroaming
9 ай бұрын
You need 48v because that's what the starlink dish needs. You can find other POE units that will also work but this is just an inexpensive option. Also many POE injectors don't support the amount of power starlink needs. Just need to make sure it can power it properly.
@brycegalbraith6375
7 ай бұрын
This is a great video. Thank you 🙏 I especially appreciate the power consumption tests. I'm off-grid a lot and rely on my lithium batteries / solar / DC-to-DC charger for everything. I've been really curious just how much power I could save by doing a Starlink 12V conversion.
@bobanddangsjourney
9 ай бұрын
Great video, and excellent description of resources available for this project!
@freelyroaming
9 ай бұрын
Thank you!
@sailingadventuress5489
5 ай бұрын
Great video. Comprehensive. I will be converting my Gen2 for use aboard the boat.
@freelyroaming
5 ай бұрын
Thanks. Good luck with the project.
@davidanglin8067
3 ай бұрын
It's me again. I have the setup mocked up using the components that you did and the Starlink is not receiving power. Troubleshooting. The Yaosheng seems to have a fair number of DOA failures, per the Amazon reviews. I am checking for alternatives. I will hook up the Starlink router hooked to 110 and see if I have connectivity and of course will check out my two RJ45 jacks. I ran the Starlink cable underneath the RV in protective loom prior to putting the jack on. It connects to a Neutrik waterproof jack installed on the back bumper of the RV. I then attached a waterproof Neutrik cable carrier on the end of the cable going to the dish.
@joetml
9 ай бұрын
Very well done. Thank you for all the info and how much starlink hardware can be eliminated.
@jzobrien8329
8 ай бұрын
Great job! Appreciate the clear and concise info, Thank you
@CharlieRoamin
9 ай бұрын
Great vid ! Thanks for all the work you put into this !!!!
@freelyroaming
9 ай бұрын
You're welcome!
@CharlieRoamin
9 ай бұрын
@@freelyroaming ....so in the initial hook-up phase the modifications show a marked improvement in consumption . After the dishy locates and connects to a satellite and stabilizes, 5 minute mark, do the 4 different connections consume the same amount of power ? - less ?
@freelyroaming
9 ай бұрын
The last 3 minutes of each test simulate what the dish consumes while connecting to satellites. So an active connection should be of similar power consumption.
@CharlieRoamin
9 ай бұрын
Thanks ! - I'm retired , traveling in an older C class - Every watt counts ! LOL !
@freelyroaming
9 ай бұрын
@@CharlieRoamin congrats on being retired!
@thejmfloragroup
8 ай бұрын
Impressive tutorial. Nicely done.
@freelyroaming
8 ай бұрын
Thank you.
@RNMSC
Ай бұрын
A tip I've seen on the wago connectors that you are using to bus the 12 volt source to the POE injector and router, is to get Wago lever nut connectors with 1 additional connection that normally you don't use.That said, having it means you can do something like add a 12 socket in line, or attach a power monitor so you can see if your power is dropping below 10 volts, which is about the lower limit that you want to have for 12v batteries. Amazon has 4 port Wago connectors (at the moment) in lots of 100 for $1.59 USD. And if you want to do all of the above, and add the option for even more ports, you can use the extra port to jumper to another block and you've now got 3 additional ports, or get a wago with more ports. It may be a good idea to color the case of the Wago connector related to the voltage and polarity they carry. Yellow is common in PC's for 12 volt, and red for 5 volt. In many autmotive setups, +12v is red. Black is often ground. Note that if you're wiring to a camper's battery supply be very careful to know what that color coding means. In my pop-up camper, the ground wire is white, and the +12 cable is black. I've never used that to supply 12 volts, but people may want to be aware of it before they start hooking up power to their equipment. Sanity check the voltages.
@5Flaash
8 ай бұрын
Thanks for taking the time to share this info that would have taken me a long time to work toward
@markreynolds8630
10 ай бұрын
Thank you for the time and effort you've put into this video. I will be following your instructions and hopefully will be able to set up on my boat here in the Philippines. I will be mounting dishy flat, as on a boat having the dish constantly moving as the boat moves would consume even more power. Also a flat installation is my only option in my case. My question is, I wonder how much power can be saved by bypassing those electric motors? Has anyone any experience, or ideas about this? Regards Mark.
@rick3d
5 ай бұрын
Great video. You covered all aspects really well. Thank you!
@freelyroaming
5 ай бұрын
Thanks. I made it because I felt like all the videos out there just didn't cover it all.
@lilianenvan
3 ай бұрын
Just the best vidéo ever, speaking on this subjet ! congrat ! +1 subscrib
@freelyroaming
3 ай бұрын
Merci beaucoup!
@SuperFredAZ
3 ай бұрын
Great video! Maybe I would color code the patch cables so that it is more difficult to plug in to the wrong RJ45 connector. The more interesting data would be after you get on-site and hone in on a satellite, motors stopped. this would be the steady-state case for most of the time.
@Twalkabout000
8 ай бұрын
REALLY WELL DONE!
@ridingvenus
8 ай бұрын
Nice to have options and facts included.
@lkm5462
10 ай бұрын
Excellent job, as usual
@frazeirarabbi6047
2 ай бұрын
in shortening standard star link cable, the crimping end should be the standard pair twisted ( wo, o, wg, b, wb, g, wbr ,br ) or the poe type ( wo, o, b, wg, g, wb, wbr ,br ) thanks
@johncrissey3496
2 ай бұрын
Thanks!
@freelyroaming
2 ай бұрын
Thank you so much!
@ericgreene2788
2 ай бұрын
Hey Dan, completed your 12V conversion and have not been successful in setting up the router to access WiFi and negate the original router. Do you have a video outlining how to set up the GL iNet router with Starlink?
@davidfrancis8899
10 ай бұрын
Good job thanks. I don’t have star link but learnt a lot
@Adventure_Awaitz
Ай бұрын
Great video, I just need to know how you setup the router to work with Starlink as I can’t seem to get it to work ( I have the same router) any help with settings would be amazing
@christophercrim919
8 ай бұрын
Regarding your recommended 12v to 48v step up power converter, I happened to install the same one with the Yaosheng POE injector and cable adapter and I see frequent brief “Disconnected” messages in the Starlink app. (It works fine with the original Starlink router.) I contacted Yaosheng and asked for help in other forums and the repeated advice I’ve received is that those power converters can be problematic (including introducing noise that affects performance). The recommendation is to use a Mean Well DDR-120-48 converter instead. I’ve ordered one and hopefully that resolves my problem. Just FYI to folks that you may want to avoid that particular brand of step up converter.
@freelyroaming
8 ай бұрын
The problem is actually more related to the 12v power source. Aka your battery and how much it sags under draw or your conductors. During startup, starlink can burst up to 100+ watts of draw. If you have improperly sized wires or too long of a run causing increased resistance and voltage sag, it can cause starlink to restart. Other larger power supplies like the meanwell have larger capacitors so it can deal with demand surges from starlink without sagging the voltage as much. By using 12 awg wiring i do not have this issue but it happens if I use 14 or 16 awg wires. Alternatively, you can also run your 12v source first into an 13.8v DC power regulator (like this amzn.to/3v8HMEQ) before running into the 12-48 boost. I know this is the case because when I have a separate large load on the battery while starlink is on, like an induction cooktop powered by my inverter, it sags the voltage on the battery and causes starlink to disconnect.
@christophercrim919
8 ай бұрын
@@freelyroaming I was testing with just a couple feet of 12 awg wire. My LiPo battery system would have been probably around 13.3V and almost no other loads, just a few watts of lights. Also, the momentary disconnect status doesn’t cause the dish to restart or anything, I just see it happening in the app when testing this 12V setup vs no such behavior when running the original router off the inverter. Yaosheng blame that Eagwell power converter. 🤷♂️ I’m about to try the Mean Well but I don’t like how bulky it is. I’m wishing now I had found and ordered the Dishy Dualie that integrates the step up converter, POE injector and remote switch control in one small package.
@christophercrim919
8 ай бұрын
I should add that while troubleshooting I’ve seen various folks say the Eagwell converter generates EM noise which can degrade the ethernet connection with the dish, dropping from a 1000Mb to 100Mb connection with some routers, thus limiting speed to under 100 Mbps.
@freelyroaming
8 ай бұрын
@@christophercrim919 it happens with the dishy dualie as well. That's what I use as seen in the video. I suspect it also will with the meanwell. There is going to be a lot or finger pointing with this kind of hard-to-pinpoint issue. Are you using a 3S lipo pack? If so, the voltage is much lower and under load it will certainly sag below the proper voltage causing it to disconnect. If it's a dedicated pack, I'd go with a 4S.
@TheGratefulSailor
7 ай бұрын
@@freelyroaming I’m having the same Starlink message, and even though it says connected on the app, I get no inet….also, I’m on shore power so have perfect 13.8 V. Plenty of power…
@450Chicago
6 ай бұрын
Very slick. Thanks!
@pmurphy12667
10 ай бұрын
excellent video and explanation!
@freelyroaming
10 ай бұрын
Glad it was helpful to you!
@kenryan1815
3 ай бұрын
Really good video.
@marcodicristofalo8449
6 ай бұрын
Complimenti, veramente un bel video , molto utile. Grazie
@landyandy4x4
10 ай бұрын
Thanks I'm looking at getting starlink in Mexico for my south America part of my world trip, and i want to convert to 12 volt ,and don't have a lot of space in my land rover 110 so this will help , thanks Andy, ps ,i met up with you in the Uk at show some time ago 😁
@freelyroaming
10 ай бұрын
Welcome to North America! We are currently in Mexico right now and waiting to see if the protests will end in Guatemala in order to continue on. Getting SL in MX is a good idea. Much cheaper there. I am seeing about a 15% power reduction from the conversion. That is a combination of 12v conversion and a shortened cable. Good luck! Maybe our paths will cross again down here!
@landyandy4x4
10 ай бұрын
@@freelyroaming thanks I came in I came in April and travelled all over Canada Alaska now in the states and I'll be in Mexico December so I might see around 😁
@filiphering4765
6 ай бұрын
Thank you for your video. I am a boater with a sailing boat and thanks to you I will crimp my first data cable at the age of 65. I also bought the Dischy from Boondocker but have not yet installed it in my boat which is in Greece. Your video is very understandable and everything is perfectly explained down to the last detail. Do you know the best way to get the Starlink Dischy permanently in a flat position, which is necessary for use on a sailing boat? Many thanks and best regards from Prague/ Czech republic Filip Hering
@freelyroaming
6 ай бұрын
I'm glad it was helpful. I have not done a flat mount conversion personally but if you don't want to pay for sometime to do it for you, there are lots of videos in watched of people who have done it successfully.
@filiphering4765
6 ай бұрын
Thank you. I have seen this videos, I was just interested if you have special experiences with this conversion. Thanks. F.@@freelyroaming
@nickward8887
7 ай бұрын
Great information, I am going down the DishyDualie route, long lead time for it, but worth the wait
@freelyroaming
7 ай бұрын
I think so. And with each new batch they continue to make improvements.
@yodaworks
7 ай бұрын
I've seen this... can you help me understand why? I'm concerned about it being unproven? TIA
@freelyroaming
7 ай бұрын
@@yodaworks I have an earlier version. Ive sent them an email asking about the changes but haven't heard back yet.
@yodaworks
7 ай бұрын
was that a recent email, or a while back@@freelyroaming ... longevity and support is what worries me..
@nickward8887
7 ай бұрын
@@yodaworks the DishyDualie has been used by many people and I understand it is very reliable... Not sure which part of "understanding why" you are looking for an answer on?
@heatherm4276
9 ай бұрын
Very nice video! I do have a question, though. I have the Dishy Dualie, and I have a MOFI 5500 router. I am curious if I could connect the three power cables together like you did for your setup, instead of a completely different 12v power source for the MOFI? I'd like to add that for the MOFI 5500, you have to remove the Router POE voltage selection jumper on the Dishy Dualie, I'm not sure if you had to do that for your router since it is powered outside of the Dualie, I just did not see you mention it. This video was very in-depth and the surprise test at the end was great. Thank you for making content!
@freelyroaming
9 ай бұрын
Since my router isn't poe compatible, I did not enable that feature on my dishy dualie. I'm not very familiar with the MOFI 5500 but assuming your 12v power source is adequate (meaning it would run at a sufficient voltage during the highest power draw), I don't see why you can just use that single power source split to 2 outputs like I did in the video.
@corkoster3091
5 ай бұрын
Fantastic video, I learned a lot, many thanks. If I take the motors out, any idea as to how much that would save. Saw Freelander did this. However, got no savings numbers.
@freelyroaming
5 ай бұрын
No real power savings with motors. They are only on for seconds during initial startup. After that it consumes no power at all.
@cfriedalek
9 ай бұрын
Very interesting video. I know little of Starlink but I'm wondering about the power saving results. Test was nice but it's set up so that the dish is constantly searching for satellites. In a sense it's a start up power comparison. Presumably (I repeat that I know little about Starlink) power usage changes once satellites are found and as the satellites move overhead. It would be nice to see how power usage changes over a longer period of time (hr+) with signal found and idling or say streaming a movie. That might give a better indication of long term power savings (or not). Anyway, enjoyed the video. Nice to see that 12V conversion is possible and your instructions were thorough and detailed. Cheers.
@freelyroaming
9 ай бұрын
Part of how starlink works is that every 4 minutes it has to connect to a new satellite. And while it is connected to one it has to constantly track it as it moves in and out of its 100 degree view every 4 minutes while it moves at 17000 kph at 350 km elevation. It's not a geostationary satellite service. The test is to simulate and also exaggerate that constant searching. And since all 4 tests were performed identically, the comparisons can be relied on.
@cfriedalek
9 ай бұрын
@@freelyroaming OK. Thanks for the info. Cheers.
@freelyroaming
9 ай бұрын
@@cfriedalek you're welcome. Btw, I've mentioned before that in AC mode, starlink uses about 1kwh per 24 hour period. This is my measurement after running continuously for 5 days.
@cfriedalek
9 ай бұрын
@@freelyroaming Oh, that's a useful measurement! I must have missed that in the video. Thanks again. Will help me with planning for my future offroad travels. Cheers.
@cynthiapierce4184
10 ай бұрын
Excellent and through.
@trrpettus
6 ай бұрын
Great Job! I had seen videos on all the other parts, pieced 90% of that together, but still had questions. ONE QUESTION about the unions, such as the weather union, are both RJ ordered 1-8 (flipped in the union) or is one 1-8 and the other 8-1 (left to right), looking down the cable to the jack as continuity is not flipped by the union? Thank you. Hope my question makes sense.
@65fstbk40
3 ай бұрын
First off, great video and detailed explanations. Late to the party but I'll comment any way. The power draw in the first 5 minutes is significant but what I would be mostly interested in the the power reduction after the dish is lock on. I only assume the power consumption is significantly lower after the dish is locked on and happy? Does anyone have an answer to that? If it is still 18% reduction (I think that was the number from worst to best case) then it might be worth the investment.
@freelyroaming
3 ай бұрын
The dish is never locked on for more than 4 minutes at a time. The power consumption during normal use varies based on activity type and level. The power savings will probably not be as high as 18% because that is considering no idle time. 18% is an exaggerated figure and I would say best case scenario as it shows the efficiency difference between the 2 setups.
@mpsa92
20 күн бұрын
Great video. Thanks.
@sailingoneiro3791
Ай бұрын
Thanks for sharing your knowledge and experience on this. It seems that I’m not alone in having problems installing the Dishy Dualie (DD) and getting the StarLink to recognize my router. I already had the dishy to router cable cut and reconnected using an RJ45 coupler as a necessary step to pass the cable through a deck fitting, and it worked fine. I plugged the dishy end of that cable into the dishy port on the DD and a new (tested and verified) ethernet cable, using RJ45 T568B pin sequence, to connect the DD router port to my router WAN port. My RUT950 router is powered by a separate POE because it is passive POE and can’t handle 48v. The jumper on the DD board has been removed as per the DD instruction sheet. With the 12v power turned on I get the red light on the DD board and my router is showing ON. I connected my phone to the router wifi, to be on the same network, and then opened the StarLink app on my phone. The StarLink is showing Disconnected and will not recognize my router. I have opened the router admin page and it shows there is no WAN input. I tried another router (RedPort Optimizer) and had the same problem. The second router was a long shot as it is not a conventional router. Maybe I should buy another, simple router and try that? I have spent two days tearing my hair out and wonder, is there additional StarLink configuration required? My 12v supply is good and, when batteries are fully charged, can get as high as 14.2v and as only as low as 13v. This is normal voltage fluctuation during the charge / discharge cycle on AGM batteries on my boat. I have reached out to Boondocker but not had a reply yet? What am I missing? Any advice would be extremely helpful and appreciated. I wonder what happened in your installation? Did the dishy and new router connect as normal and did the app go through its usual sequence until it showed ONLINE?
@greg.ocallaghan
5 күн бұрын
what kind of router would work with PoE as well? As to not have to use USB-C. In that case, you could just have one switch that turns the dishy, the router and the starlink antenna on at the same time, right? I already have the dishy circuit board now sourcing all the other pieces. I basically want to have one switch in my campervan that turns the entire starlink system on/off. Thanks for the videos and hope you can help me with this question.
@scottjackson9335
2 ай бұрын
You mean the whole thing you explained doesn’t apply or just the little adapter to the router from the dish? I have all the pieces already mounted in camper except the connection from the dish😮
@johnridley1725
3 ай бұрын
I’ve ordered and set up everything in your “easiest” system. My router isn’t getting internet from the dishy. Is there something that has to be done with the networking? I have the same router as in the video. Thank you for the help
@freelyroaming
3 ай бұрын
Several things can be happening. Most common are bad ethernet cable or too much voltage sag. Connect your phone to another internet connection and open up the starlink app. If starlink is getting enough power, you should see it online even if your router isn't connected.
@Evanmoody123
5 ай бұрын
Thanks for the video. I have done this with the "tycon" and the "gl inet ax3000" router. Everything connects and the starlink app works but the speeds are unusable. Has anyone experienced this?
@sailingadventuress5489
5 ай бұрын
Check your cables - especially if you made them yourself! It takes me a while to dial them in…
@jimhood1202
6 ай бұрын
Thanks very much for putting so much effort into the video. I'm interested in saving watts with my off grid system. I appreciate the savings to be made in your four scenarios however it seems that the cost of the extra equipment is significant enough that for folk that have the space (off grid folks like myself) they might be better investing the money in more solar? Edit: nevertheless I'll probably shorten my cable which seems like a no brainer if you don't need the full 75 feet.
@freelyroaming
6 ай бұрын
Sure. Unless you have other reasons to convert it, adding more power is much easier
@GenuineVanLife
6 ай бұрын
Great video. Thanks for all the product links and clear step by step guide. However, in the end I'm thinking how much am I going to spend to save 20 Watts instead of the original setup: Probably this whole setup is around 300 dollars, and that is a lot of money just to convert it to work on 12V.
@freelyroaming
6 ай бұрын
If you don’t need to do it then it certainly isn’t worth the time and money
@wey.aye.man.photography
3 ай бұрын
Great video, best ive seen on this topic. Thank you. I do have a question though. in your description below the video you have all of your links and this one Bulkhead CAT6 RJ-45 Coupler: caught my eye. may I ask, is this coupler grounded? Im looking for a grounded coupling for my starlink cable to put through the bulkhead of my narrowboat. Thank you in advance
@freelyroaming
3 ай бұрын
It's possible that the product was modified after this video was posted. You'd want to find one that is grounded
@wey.aye.man.photography
3 ай бұрын
@@freelyroaming yes I’m trying to, but it’s proving difficult.
@LoyalK9Utah
3 ай бұрын
Sooooo. By doing it this way, I can drive my Gen 2/3 dishey down the road in my RV with the roam purchase internet and my wife can run her laptop and work while I drive??? I heard this would connect to a phone,, but will it connect like it would at my home to my computers? Just trying to clarify.
@freelyroaming
3 ай бұрын
It should onnect to any wifi enabled device like normal. Technically the standard roam account is not allowed in motion use. However some have been able to do it regardless. Your mileage may vary.
@candrews768
4 ай бұрын
The Dishy Dualie instruction mentions removing the jumper if your router are not PoE enabled. Can you comment on this? Thanks for the great video and instructions.
@freelyroaming
4 ай бұрын
There's been a handful of revisions since i ordered mine but yes, I configured mine to not send power via the router port.
@rotamota3200
10 ай бұрын
Good stuff mate! Question though - how much work did you have to do to the GL.iNet router, to get it to work with the Starlink system, without any of the standard Starlink gear attached?
@freelyroaming
10 ай бұрын
Thanks. Nothing. You don't have to do anything to the new router. It just connects. Right out of the box starlink will assign the router a DHCP IP address.
@martinhinchy3870
7 ай бұрын
Thanks for taking the time to create this video. I just wanted to confirm what wiring scheme you should use if you want to cut the dish cable and terminate it in an rj45 so it can be connected directly into the dishy dualie? Should it be EIA568B?
@freelyroaming
7 ай бұрын
You're welcome. Dishy dualie doesn't need any special wire swapping. Just standard t568b
@kamikazekunze
Ай бұрын
Did you have to put the Starlink router into bypass mode? Thanks for the video. Sub’d
@antoniobrizzo2009
8 ай бұрын
Many thanks for the great video! I have now ordered all the parts, and I look forward to setting all things up. One question though: do I need the Starlink Ethernet Adapter?
@freelyroaming
8 ай бұрын
Not you don’t. I’ve never used one.
@davidanglin8067
3 ай бұрын
Have you had any issues with the Gl inet Beryl router? Any specific settings you have used? I am looking at Gl inet 's online forums and it seems that folks are having issues with the Beryl plus Starlink. I hope there are DC/USB powered router alternatives.
@freelyroaming
3 ай бұрын
The only issues I've had is that I've used a couple of Ethernet cables that had poor connections. I tried a couple different higher quality cables and found one that works reliably.
@davidanglin8067
3 ай бұрын
@@freelyroaming Thanks. I got on to another project. My problem that I thought was the Beryl turned out to be an activation issue, not anything hardware wise. Everything is working well. I have decided to get one of the compact entry level Eero routers as a backup, since they have the same USB C input and low power req as the Beryl. I have Eero's in the house and they work well. Everything is working fine. My first two RJ45 crimps were good, thanks to you. I looked long and hard but was able to find some short shielded and grounded Ethernet cables
@grapgatza
7 ай бұрын
Awesome tutorial, thanks a lot for the effort. I'm a bit confused. If I'm using the Tico POE injector how many of the RJ45 ends of the cable to I need to swap around to cater for Starlink's POE pinouts. So if i cut the Starlink cable near the dish, and i put a RJ45 on one end, so i can plug it into a rj45 coupler, what pinouts do i use on that rj45? Then, the cable that goes into the coupler and goes to the Tico POE, what pinout do i use on the coupler end of the cable, and what pinouts do i use on the end that goes into Tico?
@andysaward2232
Ай бұрын
Really good and clear explanations - thanks!
@snvbill1
4 ай бұрын
Under Dishy Dualie DC FAQs states "Can I power it with a cigarette lighter adapter?" "No, you cannot." Do you have any problems using lighter adapter? and do you know why they say no?
@freelyroaming
4 ай бұрын
I am only using the lighter socket for demonstration purposes. In an installation you would not want to use it. It will cause voltage dips which can create issues with reliability. Starlink dish tends to power cycle when the voltage sags below a certain level and the connections via a lighter socket is too vulnerable.
@stevengallinger4247
3 ай бұрын
@@freelyroaming So what's a decent practical power setup on a sailboat with 12V house batteries?
@freelyroaming
3 ай бұрын
It uses roughly 1kwh or 100Ah of 12v in a 24 hour period. So plan based on that.
@WilliamvanNunen
2 ай бұрын
Hi Guys, made my Starlink just as you told with the yaoshengadapter and with the dushy dualie. But the dich wohnt start. Checken all the cables. I took a longer cable cat8 from dicht dualie to the yaoscheng adapter. But i dont think that would be a issue. Please help because I don’t know what’s wrong.
@freelyroaming
2 ай бұрын
Watch my latest video for some troubleshooting tips
@davidanglin8067
3 ай бұрын
A little confused. I thought the benefit of using the little GL-MT3000 (Beryl AX) modem with USB C power via the little buck boost converter was to avoid having to use a POE device. Why would the jumper on the Boondocker board need to be moved to the VIN setting? This is in distinction from using the other method mentioned in the video using the POE injector, specially wired cables,
@freelyroaming
3 ай бұрын
The only thing powered via POE is the Starlink dish. Everything else needs to be powered directly. The jumper in the Boondocker gives you the option if you happen to use a router that CAN be powered over POE which Beryl is not able to.
@davidanglin8067
3 ай бұрын
@@freelyroaming Thanks for quick reply. The Boondocker board powers the Starlink dish via POE from the board. The Beryl is powered via USB C and the little Buck/boost device. I'm doing the method using the YAOSHENG Dishy Cable Adapter to RJ45, and the 12V to 5V USB C Buck Converter, so the stock Boondocker jumper arrangement doesn't need to be changed, correct?
@freelyroaming
3 ай бұрын
I would follow the dishy dualie instructions to see what it says. Because they have made some design changes since my version.
@davidanglin8067
3 ай бұрын
@@freelyroaming Just FYI. Got in touch with the Boondocker folks and got an answer within the hour. For any modem such as the Beryl, an externally powered (USB C in this case) non-POE modem, the well marked red jumper on the Dishy Dualie board should be removed and saved in case the setup is changed in the future. Thanks for such a complete video and orientation to this process. Very well done. My DD arrived in Jan 2024.
@freelyroaming
3 ай бұрын
@davidanglin8067 glad to hear that they are more responsive. My support requests in the past took weeks for them to respond.
@jillfitz10
4 ай бұрын
Does this work with Starlink gen 3? You are amazing!
@freelyroaming
4 ай бұрын
Thank you. No it does not. It is only for the actuated dish.
@johnnyclark4548
9 ай бұрын
Very good video. I was lucky to buy one of the boondockers 12v units long before I got my caravan, eventually got it and busy installing it. Just a question about the boondocker setting? Using the router you have there the PoE setting on the boondocker is correct or do I have to change it to the VIN setting? Thanx Johnny
@MV_Checkmate
8 ай бұрын
Question… why not bypass the Yousheng plug adapter and simply put a Cat6 connector directly on the Starlink cable to the POE injector?
@freelyroaming
8 ай бұрын
Because I want to keep the option to use the original router.
@MV_Checkmate
8 ай бұрын
@@freelyroamingno, I understand that. Let me rephrase my question. Would simply replacing the the proprietary Starlink connector with an RJ45 work plugged directly into the POE injector or is there some other circuitry inside the Yousheng adapter? Also, do you know the current that the dish requires? Cheers
@freelyroaming
8 ай бұрын
Starlink uses a somewhat non-standard order of the twisted pairs. I talked about this in the video. Namely it switches 3 and 4, as well as 5 and 6. There is no IC in the cable so if you know the proper order (shown in the video), you can just terminate your own cat6 plug in that order. However if you don't do it properly, you risk sending 48v power down the line to your dish and will likely burn up a component or two.
@MV_Checkmate
8 ай бұрын
@@freelyroamingthanks, I just wanted to make sure. And yes, I have the knowledge as I am a 30 year network engineer. I just don’t know squat about Starlink. BTW, thanks for the super quick responses. Cheers
@freelyroaming
8 ай бұрын
@@MV_Checkmate i missed your question about current. The main reason that starlink needs 48v is to lower the current in the relatively thin cable. The dish itself actually runs on 12v and the 48v sent via POE is stepped down to 12v once it gets to the dish. That said, it tops out at about 10 or 11 amps in 12v and the 48v in the cat6 cable it is about 3 amps. You'll want to make sure there isn't too much voltage sag in your 12v supply when it draws the max current. It has a tendency to power cycle when it drops below 11v.
@stevem3534
10 ай бұрын
Hi Dan great video 👍 wondered if you know if a smart dns router can be use over this network ? Thanks
@freelyroaming
10 ай бұрын
I am unfamiliar with smart DNS routers so I can give you a definitive answer. But I imagine if it works on a typical WAN connection, it's worth trying here.
@scottjackson9335
2 ай бұрын
Can I plug the starlink cable directly into Dishy if I have a gen 3 dish? Thank you.
@freelyroaming
2 ай бұрын
Gen3 dish works completely differently than the gen2. These conversion steps do not apply.
@TheGratefulSailor
7 ай бұрын
Ok…I’ve checked the crossover cables that I’ve crimped,..checks out good. And the voltage is good at 48. And Starlink app says it’s connected…but there’s not internet. Seems the router is confused somehow…any suggestions?
@tequila_and_friends
7 ай бұрын
Man this is a fantastic video! I'm planning to order the dishy dualie stuff asap as there is a pre-order process but I've got a quick question if you don't mind. In their website FAQ that is a question someone asked about if it can be powered with a cigarette lighter adapter; to which the answer was "no." However, it seems you had no problem with this in your demo and I was wondering what their reasoning might be, in your estimation?
@freelyroaming
7 ай бұрын
I am using this with a power station with a relatively short cable and 14v output. Other cigarette lighter setups won't have enough power to keep the dish running.
@tequila_and_friends
7 ай бұрын
@@freelyroaming Awesome, thanks! I've got a small camper trailer with a 200Ah LiFePO4 battery bank so I'm guessing my best bet would be to run this straight into my fuse panel (or a switch connected to it)? Thanks again!
@jeffreytaylor9802
7 ай бұрын
Thank you for all the info. I have a travel trailer with solar panels and inverter, and I travel with a 120v generator. When boondocking, I can charge my batteries if the solar panels don't charge the batteries at the end of the day. I don't see a need to convert to 12v DC for my Starlink system as I can charge my batteries with the solar panels or generator the next day. Your thoughts? thx.
@freelyroaming
7 ай бұрын
With an efficient inverter the power savings won't be that significant so unless you have other reasons like wanting to use your own router then you probably don't need to convert.
@trrpettus
6 ай бұрын
So I’m getting confused regarding the swapped ends of the patch cables. You mark them with tape. In other folks videos BOTH of the swapped end goes to the that little 1000 POE, but in yours, the dishy swap goes to the POE, and the Data out is 568B, with its swapped going into router. Which is correct.
@freelyroaming
6 ай бұрын
To make it easy, don't use the Tycon POE. Just get the Yaosheng or other injectors made for starlink. There are several available now. This way you don't even need to think about swapping any twisted pairs. Just crimp them all normally.
@Espiritiv
10 ай бұрын
Glad you show boondocker's 48V-24V converter. I also got the off the shelf starlink to RJ45 cable direct from Starlink. Then added my Slate wifi router. Now i just need a nice looking box to mount it in. Any reason you went with the GLi AX3000 router over their AX1800? Both are Wifi6
@freelyroaming
10 ай бұрын
Honestly I don't know all of the differences between all of the GL.iNet routers. I have 2 and even those they are different models, they behave pretty much the same. The AX3000 seemed to be the best value at the time when I bought it.
@freelyroaming
10 ай бұрын
looks like the AX1800 just has an extra LAN port (2) as compared to the AX3000 (1) and costs an extra $10. I don't use the LAN port so it makes more sense to me to skip it and save 10 bucks.
@Espiritiv
10 ай бұрын
@@freelyroaming One thing I'm seeing is that the 3000 has 2.5 g port written on the WAN. But the AX 1800 has MIMO
@henriquebusatto5991
6 ай бұрын
Great video! I’m trying to make my setup work but the dish is not responding, my PoE sends energy through pins 4 and 5 (as +) and 7 and 8 (as -). Do I have to use a PoE that sends power through all 8 pins?
@henriquebusatto5991
6 ай бұрын
And one other thing that I did was that I use a cabe from an old dish that I have to climp the rj45 without the need of the yaosheng adapter
@GarySchiltz
5 ай бұрын
In a couple of places, you mentioned the "75 foot standard cable". My Gen 2 came from the factory with a 50 foot cable. I'm in Ecuador, so I don't know if this is specific to this country, or if they have just started shipping shorter cables. I've heard that the new Gen 3 uses standard RJ45 connectors rather than these proprietary plugs, so they are always changing...
@freelyroaming
5 ай бұрын
Interesting. In the starlink store I can buy a replacement cable and it is still 75 ft.
@dteitsma
4 ай бұрын
Where did you get the case 3d printed?
@leoozorio067
9 ай бұрын
I'm from Brazil and I have some doubts about putting Starlink in the car. Could you help me?
@user-hr6qe3lw2d
4 ай бұрын
did you put the starlink in router by-pass to get the GL mt3ooo router to work
@freelyroaming
4 ай бұрын
No setting changes are needed. It's plug and play.
@Chrismarquez7
4 ай бұрын
What was the total cost?
@chuckneese1282
3 ай бұрын
how long will the 12volt supply run Starlink? Or is it better to connect to the house battery?
@freelyroaming
3 ай бұрын
Uses roughly 1kWh in a 24-hour period.
@chuckneese1282
3 ай бұрын
@@freelyroaming that's a lot of power when boondocking. Sounds like I need to upgrade solar and batteries and turn it on and off a lot.
@freelyroaming
3 ай бұрын
This is for a gen2 dish. If you get a gen3 dish it will use even more.
@chuckneese1282
3 ай бұрын
@@freelyroaming thank you so much for all the information. I will rethink my decision now.
@Colaaah
7 ай бұрын
Is it worth converting to 12volt? Or easier just to get a small inverter? Can anyone elaborate on which is better and why? I've been told converting to 48volts or 240volts will waste around the same amount of power, is this right? I want to put SL in my RV with fulltime traveling Australia. TIA
@freelyroaming
7 ай бұрын
I guess you didn't watch to the end of the video. You should and decide if it's worth it yourself.
@fredericklegaspi1153
4 ай бұрын
50ah battery and 100w solar panel is enough for 24/7?
@freelyroaming
4 ай бұрын
No. If you leave it on through the night it will deplete it by morning. And a 100w panel wont be enough to keep it running let alone also charge the battery. I would go with 100Ah and 200W solar.
@fredericklegaspi1153
4 ай бұрын
@@freelyroaming bypass mode can decrease the power consumption?
@trrpettus
6 ай бұрын
Do those couplers flip the pins? So that 1-8 remains 1-8, and not the reverse for one. In other words can I wire the RJ the same right from same perspective?
@freelyroaming
6 ай бұрын
Yes. just about all modern couplers no longer need you to make a mirrored pinout.
@brichusi
9 ай бұрын
my RV is running 48v not 12 for house battery So can I connect directly to the starlink dish
@freelyroaming
9 ай бұрын
I assume your inverter is always on with a 48vdc system. Just use starlink stock.
@cjbubeck
10 ай бұрын
Would you please post a link to where you purchased the 3D printed case for the Dishy Dualie. I'm having a hard time finding any vendor who offers the 3D printed case. Thanks very much
@freelyroaming
10 ай бұрын
I found a local guy online who printed it. Honestly I would just buy the sheet metal case from boondocker.io if it was available when I got mine.
@ballancampeau6427
7 ай бұрын
Thanks! I used a lynksys router and it connects to the internet but the dish says “disconnected”. Did you configure the router to pass through or set a specific IP for the dish?
@freelyroaming
7 ай бұрын
No special settings are needed on the dish. If it says disconnected, the wiring is wrong or it's not getting enough power.
@aimlessness9374
5 ай бұрын
Can I just directly convert the cable from the dish and connect it to the POE without using adapter?
@freelyroaming
5 ай бұрын
Yes, depends on what POE you use, just make sure to have the proper order of your twisted pairs. If you get them wrong, you can short out components in the dish.
@user-ku4fo1pt9r
10 ай бұрын
Hi, curious why you arent using POE to power the router? Does the POE injector make power available on both ports or only one? Wouldn't this elminate a component and simplify the installation? Thanks
@freelyroaming
10 ай бұрын
My router is not POE compatible. There is a jumper on the boondocker board that will enable 48vdc to the router port if you have one that supports it.
@5641PostRd
10 ай бұрын
Thanks, any idea whether the Tycon unit provides POE power on both ports? Their data sheet is unclear on this.
@freelyroaming
10 ай бұрын
@@5641PostRd I dont know for sure but I get the impression that it does not. There is no setting to turn it on or off and since it works with my non-POE router, I suspect it is not sending power to it.
@user-girdsgoesoffgrid
9 ай бұрын
Hello. Just wondering with the router you have used in this video, how good is the range? Will it work inside an aluminum canopy attached to a car? We will be on top in a roof top tent but keeping the router dry and connected to power it would have to live inside the canopy. Worried the Wi-Fi wont reach us
@freelyroaming
9 ай бұрын
It works from the inside of my van while I'm outside so I think you should be fine as long as you are not far from the vehicle
@user-girdsgoesoffgrid
9 ай бұрын
Oh thank you. You mention also there is a an off/off capable switch on the dishy dualie. Would this allow us to connect to our power management system so we can then turn the dishy dualie off/on remote? This would be awesome if you thought this function works
@freelyroaming
9 ай бұрын
There is and I believe you can depending on how your system works. I just use a 12v wifi enabled smart relay to power it so I can turn it on and off remotely that way.
@pje3325
9 ай бұрын
Will this system work w the starlink mobility dish? From what I understand; the mobility dish is a “power hog”. Tnx!
@freelyroaming
9 ай бұрын
No this is not for the bigger high performance dish. Just the standard one with the tilt motors.
@montaguemonro565
10 ай бұрын
How easy do you find it to handle running starlink off your batteries? I live on a boat with a 200ah lifepo4 battery and about 1kw of solar, however I can imagine that running ~100w all day to power the starlink being quite painful over winter. I usually have enough power for winter with no major issues, but a further 100w continuous load i feel might be quite restricting.
@freelyroaming
10 ай бұрын
Yes indeed. The draw will fluctuate once the dish connects to satellites based on your usage pattern. I've seen it draw as little as 45 watts on idle. But it is still significant. Turning the dish off at night or whenever you're not using it will save a good amount.
@Espiritiv
10 ай бұрын
lithium batteries are cheap now. Time to upgrade to 400Ah
@freelyroaming
10 ай бұрын
@@Espiritiv For me it has more to do with solar than battery capacity. I've got more than 600ah of lithium batteries in storage that I am not using because I can't fit enough solar on the roof to replenish them regularly if they run down.
@Espiritiv
10 ай бұрын
@@freelyroaming I hear you can get hydro generators that you tow behind your sailboat they give you some additional charge.
@jakeworsfold3669
8 ай бұрын
@@freelyroamingin this situation 1kw solar is way more solar than you need for 200ah battery
Пікірлер: 235