To everyone saying this does not work: it does. But, there were two types of the precision pro made. One that had the USB functionality, and one that didn't. The one with USB functionality will have a product ID starting with 85791. Hope this helps.
@billwilliams2463
6 жыл бұрын
i've got a 85971 and it does get recognized by windows 10 using the 98427 gameport (da-15) to usb adapter. however not all games recognize the sidewinder in windows 10, damn it microsoft allegiance you had one job!
@RanaRandom
3 жыл бұрын
is there a adapter cable that converts the original sidewinder plug to the USB? (I'm not into technical bit here)
@FoamFlyinFool
3 жыл бұрын
@@RanaRandom yes I tried the adapter first I show it in video it didn't work for me because of the 2 wires that need shorted.
@asslord
Жыл бұрын
I found one of those on the street the other day, in a box for free. Converted it to USB today according to your instructions, soldered everything nice and clean and it works like a charm. I always wanted one of those sticks but never enough to pay money for em. Thanks a lot for this video, it's still helping this guy out almost 7 years later :)
@mrmikeyshub
Жыл бұрын
nice, same I actually got mine for free, listening to him minute 2, everything is optical, do you think would be worth a try to simply connect the cables using optical mouse board? i'm watching the whole video now,
@DarkLordPrime
6 жыл бұрын
I bought a Sidewinder Freestyle Pro at Goodwill awhile back and never got around to testing it out. I just used this guide and am pleased to report that it works perfectly. Thanks!
@WireWeHere
4 жыл бұрын
A friend's $28 non working adapter was only missing the connect Pin 4 to 7 detail. Well done and thanks for helping out the future. Always leave enough cable length on the cut off connector so that it can be spliced a couple of times for the next thing that comes up. It's a law of industrial automation thing, the probability to need stuff is inversely proportional to its pucked up time. The first few hours are the worst.
@gweckesser
7 жыл бұрын
It works like a charm!!! Thank you very much Sir. You brought a beautiful gift to me with this tutorial. You don´t have a clue, how happy you made me. Thank you one million times!!! Greetings from Argentina.
@leunambuitragoflores3684
7 жыл бұрын
como hizo yo no e podido? As I did I could not?
@SanaullahKhan-nv8tw
6 жыл бұрын
bro how you did i did the same thing but not work
@thierrykurt3867
6 жыл бұрын
Exelente! ,tengo que probar lo mismo , por aca desde CBA , a ver si logro hacerlo andar
@AlbertoMiguens
5 жыл бұрын
@@thierrykurt3867 Te anduvo?
@thierrykurt3867
5 жыл бұрын
@@AlbertoMiguens Lo tengo que traer del deposito , no lo encontre por ahora, a ver si lo encuentro en breves para probar si funciona
@jevansturner
6 жыл бұрын
It was released during the transition to USB. The original included a passive USB adapter. I see them at my local Goodwill thrift store all the time. Half the time, the original USB adapter is still connected to it.
@mrmikeyshub
Жыл бұрын
hey, for EU with no goodwill, what would u recommend? adaptors are expensive, its same as buying a thrustmaster...I was thinking to hook it to a keyboard or optical mouse and then connect to xbox. or use an old controller since basically all I'd do would be remapping??
@jasonhunt8553
8 жыл бұрын
it WORKS i tried it Genius
@kaisong4295
6 жыл бұрын
great works perfectly, just add one more thing usb black to joystick black. thank you again. it was so good.
@SanaullahKhan-nv8tw
6 жыл бұрын
i did the same but it work , can you help me ?
@madmorgan6484
5 жыл бұрын
thanx man i just revived muh microsoft freestyle pro
@misiekt.1859
4 жыл бұрын
Works with part no. X03-57540, bought two of them for pennies and did this long ago. Also you might want to put thin spacer under main spring to eliminate wiggle/deadzone of main two axes. Unfortunately mine has bit third/rudder axis wiggle.
@ryankirk5971
6 жыл бұрын
Old video, but thank you for sharing!
@AshtonCoolman
6 жыл бұрын
I bought one new back then. It has a USB adapter. I still have it.
@FlorianRunser
6 жыл бұрын
Same question, done the same wiring, and when pluging the usb cord to PC Windows 7 got an unrecognized peripheral. How could the joystick working on usb passing from 9 to only 4 cables ? I try understand. My Sidewinder PRecision pro should work in USB because it is a 85791. Thanks in advance
@David-dz1cb
3 жыл бұрын
I have a Sidewinder 1.0 from '96 I think, and the original USB adapter that came with it- and Windows refuses to recognize it. Any tips for a Win10 user? I'd love to play Tie FIghter.
@spirozanganas
3 жыл бұрын
Mine on the back has product number97482...do you think cutting the old outlet and using your chart to usb ...will work?
@wizz1325
8 жыл бұрын
thanks dude, someone just gave me and old joystick and was able to figure it out in google simulator, whoda figured they had a sim in there...hehehe
@camiloalvarez9850
4 жыл бұрын
HI! I want to do this but using an arduino Nano, do I have to write the code again?
@decieci
5 жыл бұрын
Works excellently. This joystick is perfect for FSX.
@kvanckeskinbora8148
4 жыл бұрын
Force feedback feature also?
@ertugtuncaelli2173
7 ай бұрын
Hello! I have an old 15 pin joystick. As you know, technology with gameport input is a thing of the past. New devices do not have this entry. My question is, can we convert the 15 pins on the gameport to USB? To which numbers of the 15 pins on the gameport should I connect the 4 cables on the USB? joystik pradator xk 100
@guifalcades7485
4 жыл бұрын
The driver is installed automatically when you plug the USB? Or need make the download the driver? Do you have the driver to share with me please?
@stevenA44
6 жыл бұрын
Thanks for this video. I have an old Thrustmaster Grandprix 1 wheel I am going to check to see if this can be done. I tried one of those same adapters like you have and it didn't help, so now I'm going to open this wheel up and see what I can find.
@mrmikeyshub
Жыл бұрын
oooh man..thank you for commenting...I just realized I have a broken steering wheel, USB i could hook the sidewinder using that and have usb connection..
@sethcohen3354
4 жыл бұрын
Mine says unrecognized USB Device, did I make a mistake while doing the process or is it a software problem?
@FirstBurns
7 жыл бұрын
My sidewinder came with a USB adapter. Got it from my father in 1997 or 1998 I think and I still use it to this day, no need to install anything just plug and play. It's a great stick, the only downside is that it became a bit wobly.
@luise.suarez5815
7 жыл бұрын
So, what type of adapter is?
@mrmikeyshub
Жыл бұрын
@@luise.suarez5815 NOBODY KNOWWWS !!!. i've seen some type of adapters made with arduino...still..takes some basic skill.
@boysopas5951
3 жыл бұрын
will it work with an usb nest rockfire?
@user-ee8qv4jb4n
2 жыл бұрын
Все ок. !!! Отлично работает . спасибо.
@EinfachNurNiko
7 жыл бұрын
I find a PC Optix QJ SV-205 at home. I want to connect that with the usb to the pc. But ist don't work.
@TheLazySamurai
4 жыл бұрын
This video would have been perfect if you go the Sidewinder 3D Pro Plus, exactly the same button layout, with yaw, but not compatible with USB adapters.
@croustian68
7 жыл бұрын
What usb cable did you use im thinking about an keybord or mouse wire
@EinfachNurNiko
7 жыл бұрын
in his Video, he used a usb 2.0 wire.
@macnbeans8722
Жыл бұрын
Had to connect the dark blue wire to the pink wire instead as I have an older version. As soon as I did that worked like Charm.
@maskystudio9193
4 жыл бұрын
have force feedback?
@albertmonill2057
4 жыл бұрын
Hello, I got one joystick exactly as yours and I'm doing the conversion to usb with a commercial connector. Unfortunately I connect the joystick to the PC (using Windows10) and does not even recognize that anything is connected. How did you make it? Thank you in advance.
@manuel-wq4nm
4 жыл бұрын
drivers
@albertmonill2057
4 жыл бұрын
@@manuel-wq4nm oh thank you it is the most useful response I have ever seen. Could you be a little bit more specific?
@Jestlianocupido
7 жыл бұрын
hi is there away with the old microsoft side winder force feedback wheel?
@JayBmusic
7 жыл бұрын
I just tried it. However, there's a ninth wire that's light blue and I don't know what to do with it. When I plug it in the PC recognizes there's something plugged in but says the USB port can't be reset and thus the device doesn't work.
@bla2030
7 жыл бұрын
I too am interested in the very same thing. Please, if you find any appropriate "hack", pm me!
@radekjuracek3055
5 жыл бұрын
@@JayBmusic Any news?
@irevelb
4 жыл бұрын
Hello I have a problem, I have to connect red with red, black with black, green with green, yellow with white and dark blue with purple and when I plug it in tell me port supply ". can you help me if you please. (Translated with google translation)
@joeharrison9184
2 жыл бұрын
how do you hind the pin number for the wires
@CeruleanDragon1
5 жыл бұрын
I wonder why the USB-GamePort adapter didn't work... it should have done the exact same thing. Also wondering if this will work on my old MS Sidewinder Force Feedback Pro... sorely tempted to find out.
@FoamFlyinFool
5 жыл бұрын
does not work on forced feedback sidewinder
@voguejeezuspose8945
8 жыл бұрын
Ok thanks
@DrCJSmith
7 жыл бұрын
Hey, Foam. Thanks for sharing. Will give this a go. Did you manage to get Force Feedback?
@FoamFlyinFool
7 жыл бұрын
The sidewinder in this video doesn't have force feedback it's just the basic flight stick but I do I have one here that is force feedback that I been meaning to get working. When I do it I will make another video if it's different wiring from this one.
@DrCJSmith
7 жыл бұрын
FoamFlyinFool , I got one of those "Super Joy Box7" USB game port adapters for my Thrustmaster X Force and Sidewinder FF Pro. On the X Force, it recognizes all the buttons but the software also added non-existent pedal and throttle inputs. Although the Sidewinder was recognized, the buttons didn't work. So slice and join is my next option.
@mawsaints528
7 жыл бұрын
i would like to see this too. I have an old Force Feedback Pro joystick with the old controller ports and was wondering if it was possible to rewire it for a usb connection.
@filippass11
7 жыл бұрын
Any progress?
@DrCJSmith
6 жыл бұрын
Foam, looking forward to it. I think it's also because Windows does not recognise it as a Force Feedback joystick. I also have one of those old Thrustmast FCS type joysticks. May try to rewire that one, maybe with an Arduino board.
@johnnysmall4321
6 жыл бұрын
whats about the power adapter for ffb? does the ffb work? and do i have to use the power adapter too?
@ddegn
4 жыл бұрын
This isn't a force feedback version.
@johnnysmall4321
4 жыл бұрын
@@ddegn ok, thanks for the information !
@Uno6I
5 ай бұрын
If you go into controller settings and it displays as ok then go into steam controller settings and set up the joystick
@CarlosHenriqueNoronhadeAguiar
8 жыл бұрын
good! but i didnt understand the part of blue wire, can you explain?
@FoamFlyinFool
8 жыл бұрын
+Carlos Henrique Noronha de Aguiar Light Blue wire is unused and left open the dark blue wire should be connected to the purple wire
@victorluisdiez4646
3 жыл бұрын
Hi bro. I have a sidewinder standart, is the process the same? Thank you.
@FoamFlyinFool
2 жыл бұрын
Yes, it is
@Nissan_Lev-Ran
3 жыл бұрын
Does it work with MS FS 2020 under WIN10?
@victorluisdiez4646
3 жыл бұрын
I have the same question!!!
@Menjac
7 жыл бұрын
I have only Red , Green , White , Black wires on USB Cable. How can i connect it ?
@noxioussatry1476
7 жыл бұрын
Menjac you have to get a USB wire with more cables, the one youre using is a standard USB for charging or file transfer I would go to an electronic store
@voguejeezuspose8945
8 жыл бұрын
What kind of usb? The ones I split only have ground and hot. Please help!
@glitchingaming2343
8 жыл бұрын
you might have split a usb power cable, not a data one
@dolphin069
5 жыл бұрын
@@glitchingaming2343 ;)
@spirozanganas
3 жыл бұрын
Do all controls respond on the Google Earth pro. I am.havingbthecsame problem...and you are a genius...
@CrazyMedic
Жыл бұрын
Hi, I think I already know the answer. Just did this to my FFB sidewinder pro and it isn't recognized. In fact in device manager it does not show up. Am I correct if I read all your replies correctly. this doesn't work for FFB?. In one you say you will see if you can get this work. Did You?
@julianbarbera9822
7 жыл бұрын
think you could link a diagram?
@TheDeathOfLucifer
3 жыл бұрын
No
@BloodBite
4 жыл бұрын
I wonder if this could work for Genius Flight2000 F-22x
@pablodegian
3 жыл бұрын
I have the same
@BloodBite
3 жыл бұрын
@@pablodegian did u manage to do it?
@pablodegian
3 жыл бұрын
@@BloodBite I'm not figuring out how to convert it to usb
@dabneyoffermein595
3 жыл бұрын
wow , what a joystick, that thing rocks. does anyone know anything better?
@parajared
7 жыл бұрын
do all the buttons work?
@FoamFlyinFool
7 жыл бұрын
yes all work as they should just plug and play on windows 10
@petertremblay3725
3 жыл бұрын
Would this work with sidewinder 3D pro?
@jerrymetal7464
2 жыл бұрын
I have that, I have followed all the steps and it does not work, windows does not detect it. Sidewinder 3d pro plus, dont work.
@petertremblay3725
2 жыл бұрын
@@jerrymetal7464 THank for the reply i have also tried and failed.
@DelicAlmin
8 жыл бұрын
i have "microsoft sidewinder 3d pro plus"... is it possible to convert it to use usb port? tnx!
@OpenGL4ever
7 жыл бұрын
I don't know, but the MS Sidewinder Precision Pro was a USB capable Joystick right from the beginning. It shipped with a Gameport to USB Adapter. That's also the reason why it works, this Joysticks understands the USB Protocol. I am not sure about your MS Sidewinder 3d pro plus.
@jerrymetal7464
2 жыл бұрын
Dont work for that
@LuisHenriqueON
8 жыл бұрын
I am having difficulty in buying an adapter in Brazil. Then I thought of following this method. All buttons will work? because it just used the stick in the video.
@FoamFlyinFool
8 жыл бұрын
+LuisHenriqueON yes all the buttons work Windows 10 detected it with no 3rd party drivers
@FoamFlyinFool
8 жыл бұрын
+LuisHenriqueON I could not get it to work with the USB adapter with windows 10 I kept getting device descriptor errors.
@LuisHenriqueON
8 жыл бұрын
+FoamFlyinFool I will make this change with my then will post the results. Thanks so much for the help.
@mauriciosilva03
8 жыл бұрын
+LuisHenriqueON Olá tudo bom ,gostaria de saber se vc conseguiu resolver o seu manche pois tenho um e gostaria de resolver também.
@LuisHenriqueON
8 жыл бұрын
Olá! Não consegui resolver o problema, acredito que o Manche está com defeito. Verifiquei que ele já havia sido aberto antes, e como ele me foi doado, é provável que não funcionasse mais mesmo. Uma pena, o manche é lindo e deve ser muito Top. Desculpe a demora na resposta. No final das contas ele ta parado aqui.
@lecinquiemefils
7 жыл бұрын
hi. I got myself a joystick and tryed to do the same that you did but it doesn't seems to work :/. Can you guide me where you get the knowledge about the meaning of those colors ? would be appreciated a lot. thanks
@FoamFlyinFool
7 жыл бұрын
Did you make sure to twist the dark blue and the purple wire from the joystick together ? I forgot about that and didn't mention it until towards the end of the video.
@lecinquiemefils
7 жыл бұрын
Thanks for the quick answer ! Yes i did it but it's not recognized at all in my windows 10. The facts are that i got a force feedback model ( grey/yellow/lite blue/dark blue/purple/red/black/green) and an USB3 wire (brown/yellow/blue/red/black/purple/whitegreen) so it's a little mess over there ^^. Sry to bother, thanks again for the help :D
@FoamFlyinFool
7 жыл бұрын
Yes, there's more to it with the force feedback joystick for some reason. I recently got a forced feedback sidewinder about a month ago but haven't gotten it to work yet and haven't had much time to figure it out lately but when I do I will make a new video for the forced feedback.
@lecinquiemefils
7 жыл бұрын
Ok, nice ! I'll try to dig my own way into that meanwhile. If you have any clue like technic information to guide me it will make my day :). If not, thanks anyway for your work o/
@FoamFlyinFool
7 жыл бұрын
I wish I could give you more info but with the forced feedback I am as lost as you are. It should work but for some reason it does not. I am sure I can figure it out with some probing around but until then I am lost as to why it doesn't work.
@flaviogizzi8712
7 жыл бұрын
sorry friend I have a sidewinder FFB and I am trying to do what you did but the configuration of the cables does not work for me.
@stradivarius71
6 жыл бұрын
same for me
@craftandshaft
6 жыл бұрын
The Sidewinder Precision Pro had USB built into the stick, where the converter was nothing but passthrough and shorting two wires to tell the stick to enter USB mode. I don't think the FFB had a USB mode.
@DivinityAureole
2 жыл бұрын
I just got this thing from my grandpa that he got from somebody. I got no clue what you're talking about lol. I'm 15 just trying to see the things he gave to me if they work and stuff
@MatthewSuffidy
6 жыл бұрын
I got a free gameport one today. I got it knowing I have various sound cards with gameports on them. I think you are saying you changed the wiring from the joystick to the serial/usb adapter. I sort of doubt you could literally hook a usb cable into the joystick. That would mean either the joystick was designed around the usb era and had support for it, or the motherboard had some level of serial device support on usb lines. Very dangerous. Anyway I got it working fine in Linux, but am having trouble getting the drivers for the gameport for an audigy 2 with the kx project drivers already installed in Windows 7.
@frankiequinones2855
8 жыл бұрын
didn't work for me put all the wires like you said and nothing
@stevemann6082
4 жыл бұрын
there is a game port to USB converter for this joystick made by logilink , looks like the force feedback joystick ? if it is then if you get the force feed back working its amazing it shakes the whole house through your desk. irritates everyone in the house when you get shot the problem back in the day was the European union banded Microsoft from its game accessories monopoly. so the drivers for this joystick only exist in windows 98. unless anyone knows different let me know please :)
@therealatliss
8 жыл бұрын
It isnt working for me, and yes all wires are in contact with their correct opposite.
@FoamFlyinFool
8 жыл бұрын
+Atliss Budder Maybe you have a defective joystick
@FoamFlyinFool
8 жыл бұрын
+Atliss Budder Also check to be sure you have the Dark blue and Purple wire coming from the joystick shorted together.
@arturlinden9442
7 жыл бұрын
Thanks for the help!
@maikovandeneynde4747
4 жыл бұрын
Light is lighting up but pc doesnt seem to to find the usb device....
@CharlesBlackwellFoamFlyinFool
4 жыл бұрын
did you twist the dark blue and purple wire together as shown towards end of video
@CharlesBlackwellFoamFlyinFool
4 жыл бұрын
Light Blue wire is unused and left open the dark blue wire should be connected to the purple wire
@maikovandeneynde4747
4 жыл бұрын
@@CharlesBlackwellFoamFlyinFool yes done that too.. Maybe it s just broken
@ryangiranda569
7 жыл бұрын
if you buy the original adapter from 95 it would also work.
@FoamFlyinFool
7 жыл бұрын
Need a time machine for that.
@ryangiranda569
7 жыл бұрын
FoamFlyinFool lol I picked one up from a classic game store. collector's like that stuff, so it's pricy.
@croustian68
7 жыл бұрын
I just do this what's in the video but it's not work i've plug: P1(Red) with +5v usb (1) P14 (Yellow) with Data in (3) P10 (Green) with Data out (2) P4 (Black) with Ground (4) P2 (Purlple) and P7 (Dark blue) jump together Left P3 (grey), P7 (White) and P8 (Light blue) Wide open So what's my error ? My Usb is: Pin4 Green (Ground) To P4 Pin3 White (Data in) To P10 Pin2 Blue (Data out) To P14 Pin1 Orange (5v) To P1
@FlorianRunser
6 жыл бұрын
Same question, done the same wiring, and when pluging the usb cord to PC Windows 7 got an unrecognized peripheral. How could the joystick working on usb passing from 9 to only 4 cables ? I try understand. My Sidewinder PRecision pro should work in USB because it is a 85791. Thanks in advance
@-carthago-delenda-est-
4 жыл бұрын
Why is not possible with others products ID?
@luukvanoijen7082
3 жыл бұрын
helo plerse make work for wheel
@scottzarkos3466
5 жыл бұрын
Let's ditch it in the river waaaaaaaaaaaa......lol
Пікірлер: 142