Well done.I was dissapointed to see I have to move the gas tank.What a pain in the ass ! My coolent is 10 yrs old so I have to do it : (
@t.j.postal8309
Жыл бұрын
Not hard at all. You can do it.
@SquidlyMcnerd
8 ай бұрын
Thanks for taking the time to make this video and share it. Much appreciated.
@t.j.postal8309
8 ай бұрын
Thanks for watching
@allenjalaligmail
10 ай бұрын
They Make it near impossible for DIY. But you made it look so easy to do. Thank you.👍👍👍👍👍
@t.j.postal8309
10 ай бұрын
Thanks for watching.
@rodnicholson6754
3 жыл бұрын
Love the sound of the birds in the background!
@TwoWheelsBackroads
2 жыл бұрын
Brilliant! Thanks for this video.
@UncleTex
2 жыл бұрын
Well done. As previously stated run dngine to operating temperature prior to replacing cover plate to ensure coolant level is correct ( not that the be too much difference). Great guide and found the video very real and informative 👍. Great job mate
@t.j.postal8309
2 жыл бұрын
Thank you, sir.
@LMCtubokuChannel
5 жыл бұрын
Nice work 👍
@jordanhernandez752
4 жыл бұрын
I appreciate the video
@donweaver1600
3 ай бұрын
Should you not run the bike the continue to top up
@mml1224
4 жыл бұрын
nice vid! one of the best on this. what antifreee do u recommend 50/50, any suggestions? Can we use car antifreee green or red on older v900s? also, anything we should b worried about when moving tank, dont want dislocated any hoses underthere? Thanks!
@t.j.postal8309
4 жыл бұрын
Pretty sure I used 50/50. Green color. I had enough clearance with hoses when I lifted my tank. don't need to go very high. Thanks for watching.
@bobrightnar1282
4 жыл бұрын
Hey can you show me how to remove and clean injickterin carbs
@thedaydreamer7972
2 жыл бұрын
NIce video, I just got a Marauder VZ800, Im having the temp light come on at times during the ride, I have no idea when the last coolant change was performed, I just got the bike,,,DO you have any idea where the radiator drain is on the that one? I cant seem to find it,,,TY
@kee7678
5 жыл бұрын
What year is yours? Mines a 2011, 8500 miles on it. I"ve been looking for videos on how to do this and finally found yours. I'm not able to check the level cause I can't find it. But, 2011 and I've never changed the coolant so far so...figure I should by now right ? Another guy told me it's fine so...not sure what I should do. I also found..kinda oily drops but they dry and leave slight stain on the concrete...coming off the rectifier cover...so it's close to the oil filter area which gets a little oily grimey but..it's not what's dripping or it's a mix of something with a tiny bit of oil......
@t.j.postal8309
5 жыл бұрын
Thanks for watching. Mine is a 2008. I just changed mine because I figured it could use it and I was bored. The level on yours should be good if you're not overheating or draining (overflow) a lot.
@HobieCat4
5 жыл бұрын
shouldn't you run the bike after filling coolant tank before putting covers back on to make sure coolant is at correct level?
@t.j.postal8309
5 жыл бұрын
I took a ride and checked it after. I was still within range so I didnt go back in. Thanks for the comment. I should have put that in the video.
@Amp661
2 жыл бұрын
Thank you man! i have a question: How much coolant did you pour in to refill in the front of the bike? Do you pour the whole thing in as shown in the video or is there a spec amount to pour in?
@t.j.postal8309
2 жыл бұрын
From what I remember I could see the level and just eyed it. Thanks for watching.
@alexanderleuck7024
2 жыл бұрын
I have an 08 Vulcan 500. Do you know if it will be the same thing?
@bobrightnar1282
4 жыл бұрын
Can you tell me where the wind actors are in the fuel lines and how to remove them and and clean them
@bobrightnar1282
4 жыл бұрын
I need to know how to remove the injectors from the carburetion clean them and put them back in on a a 2007 900 Vulcan Kawasaki
@michaelplunkett8059
6 ай бұрын
When Japann subcontracts simple maintenance to German designers. Why not a drain and accessible filter without disassembly.
@vulcanpilot-go7dj
5 жыл бұрын
Will this process work on a vn 2000 ? Thanks for putting this video up!
@theone2be33
3 жыл бұрын
Yes
@FRJ1982
Жыл бұрын
Hey there brother, nice informative video. Do you happen to have a video for replacing a thermostat?
@t.j.postal8309
Жыл бұрын
sorry. Never had to replace one.
@FRJ1982
Жыл бұрын
So you basically didn't disconnect anything from the gas tank? You just took out the two back bolts and pulled it back and off a bit?
@t.j.postal8309
Жыл бұрын
yes
@cutekeks5785
2 жыл бұрын
Did you start it and let the new coolant cycle thru then have to add more?
@t.j.postal8309
2 жыл бұрын
Pretty sure I ran it and didn't have to add more.
@marcell114
4 жыл бұрын
did you just forgot to fill up the reserve tank at the first? it seems like when you taken back the side cover the tank almost empty :D but this is a good video thank for it :)
@t.j.postal8309
4 жыл бұрын
I think I did. I remember having to go back redo something.
@Vulcan_Tech
3 ай бұрын
And how do you get all the air bubbles out.
@dukedonotti
2 ай бұрын
Run the engine and it will happen automatically. Air will dump into the reservoir and coolant will be taken up in its place. 👍
@corneilcorneil
5 жыл бұрын
There is a fork top cover missing ... cover the top with greace, or it gona rust like you never see before.
@t.j.postal8309
5 жыл бұрын
I have cleaned it out with steel wool and added some silicone to it. it drives me nuts. I gotta find some cheap caps to put it. Thanks for watching.
Пікірлер: 47