Next video will be the tint and front end suspension Then im thinking i should replace water, radiator, hosing etc and maybe make a how to videos out of them If these anything else you guys think of let me know Take it easy Byzaa👍
@hemiwiteri7177
9 ай бұрын
9ojxkozķźdfiíduzuz9😅😅😅😅😅😅
@Asapsadboi
3 ай бұрын
This video taught me that i poured my coolant into the overflow very nice
@downtheshedwithbyron
3 ай бұрын
Nice 👌
@1969Risky
Жыл бұрын
Great video mate, nice & simple for those with limited knowledge to do it themselves.
@downtheshedwithbyron
Жыл бұрын
Thanks bro It was just a hanging out video which for some reason i turned into a how to haha
@stevewilson8752
4 күн бұрын
Great video & handy tips there digger 😊 love ya work 👍 Cheers from Bundy Qld 🍹🕺
@downtheshedwithbyron
4 күн бұрын
@@stevewilson8752 cheers brother 👍
@donaldhalls2189
Жыл бұрын
I like the filler jug but VZ etc run a different cap and if the housing for the cap is corroded may have trouble, thanks for sharing, all the best to you and your loved ones
@downtheshedwithbyron
Жыл бұрын
Cheers mate
@BADQ
Жыл бұрын
Another awesome vid mate. How gunky is that cooling system haha reminds me of my first HQ in the 90's it had a 179 engine and was so gunked up I found what looked like an ear in the radiator LOL that memory stuck with me and a mate who witnessed it. Always getting reminded about it ha. Those yellow thingos are very handy ive had one for years.
@downtheshedwithbyron
Жыл бұрын
Thanks dude Yeah bro ill probably flush it again and do videos on water pump radiator etc replacements
@Brandon-bh9qz
Жыл бұрын
Good video mate, lookin to do a coolant flush on my vy. Busted gasket by the thermostat that needs replacing and mate, pulled the coolant dipstick out to have a look and seen nothing but gunked up red mud.
@downtheshedwithbyron
Жыл бұрын
Yeah sweet dude
@darrenmoore2
Жыл бұрын
that gu patrol in the back ground looks awesome
@downtheshedwithbyron
Жыл бұрын
Its ok just no air con
@darrenmoore2
Жыл бұрын
parts on the way. @@downtheshedwithbyron
@downtheshedwithbyron
Жыл бұрын
Whens your next video coming out bro
@amounifnd
7 ай бұрын
nice vid. I believe Holden recommend removing the bleed nipple completely when filling through the top radiator hose with one end in the radiator. This pushed all air out when filling block and most of radiator. Once it starts running out all air would have been pushed out. Reconnect the hose and fit the yellow tool or an old radiator hose and fill more coolant until steady stream from the bleed screw. As it is squirting out install and tighten screw. Then just start it up and run till thermostat opens. But this stage most air left is bubbles from the water pump impeller. The supercharge versions can be really hard to bleed with the thermostat at the back.
@downtheshedwithbyron
7 ай бұрын
Yeah mate thats the go
@Shanes_Shed
Жыл бұрын
Jeez that coolant looked like something you'd expect to find on something made in the 70s
@downtheshedwithbyron
Жыл бұрын
Yeah bro but hopefully we can get the old girl back up to scratch
@AussieGarage
Жыл бұрын
Wicked video mate, love it.
@JankoMW
24 күн бұрын
So after the flush an alternative to test/relieve the heat pressure rather than rag over the cap is to crack the bleed nipple at the top of the top hose.
@downtheshedwithbyron
24 күн бұрын
I like to do it as im filling the system
@JankoMW
23 күн бұрын
@@downtheshedwithbyron fair enough. Had a mate do the rag method when he thought it had cooled down enough and about a litre of coolant exploded on him, wasnt burned luckily but any hotter and yeah.
@dhghT
3 ай бұрын
Hey thanks for the video, I found it very helpful. I have got to the stage of refilling with water and draining again to clear out the flush cleaner but I can only get about 6 or 7 litres back in each time before it overflows. My manual says it should take 12 litres. I am guessing the block still has about 5 litres in it. Will that be ok?
@downtheshedwithbyron
3 ай бұрын
Cheers dude 👍 Yeah id buy 10l of coolant and you'll be right
@demolitionman9307
Жыл бұрын
South Australia, we never had inspections, unless the car got defected, i'd have absolutely no question, SA cars would be the Roughest in the Country. But shhhhh, Don't let our State Government know,
@downtheshedwithbyron
Жыл бұрын
Yeah bro i remember that Ive got the old ht premier from SA
@demolitionman9307
Жыл бұрын
@@downtheshedwithbyron nice!
@demolitionman9307
Жыл бұрын
Think YT removed my comment because it had a Phone Number? Whyalla is having a demolition Derby in January, open class (Full size cars including utes/Panel vans) and to call Browny. For further details, (i'll provide later) it's closer to you you than Murray Bridge by at least a 10 hour round trip.
@downtheshedwithbyron
Жыл бұрын
@@demolitionman9307 im at work for all the SA derbys which is a bummer and WA hasnt listed any
@demolitionman9307
Жыл бұрын
@@downtheshedwithbyron January the 6th.
@Mickey.Doyle80
4 ай бұрын
For the tint use the garbage bag trick
@downtheshedwithbyron
4 ай бұрын
Ive seen that work mint but i got AAA windows Cannington to remove $30 haha gave them a $50
@harrydowling3271
8 ай бұрын
Bloody oath good help 👍
@downtheshedwithbyron
8 ай бұрын
Cheers mate That bloody good it passed the pits today 👍
@williamtopia2135
Ай бұрын
i dont have the tool to flush the block thru the heater hose is there another way i can flush the block?
@downtheshedwithbyron
Ай бұрын
Gday mate You can just jam the hose up there it will be fine
@mikebazil1
2 ай бұрын
Ah, the old gatorade bottle, eh?
@downtheshedwithbyron
2 ай бұрын
They work a treat
@XJDBAU
4 ай бұрын
Just had to top up coolant in my 03 VY Berlina so topped it up via the radiator cap made sure it went through took it for a 40 min drive got home then after it cooled down I checked it and it wasn't at the top so I gave it a good pour and I've been doing that for the passed 3 days is that cause it needs to go through the system and everything so it's not completely full or something? I've seen no leaks anywhere got cardboard under it everyday to see if so but nothing yet anyone understand what I'm talking about thanks fellas!!
@downtheshedwithbyron
4 ай бұрын
G'day mate Hey maybe see if you can borrow a pressure tester or get it pressure tested sounds like youve got a leak Sometimes the intake manifold leaks at the back of the engine
@downtheshedwithbyron
4 ай бұрын
Also see if these a coolant stains on the transmission eg where coolant from the back of the engine could be running down from
@jadenwilkie9398
14 күн бұрын
Is it the same for VZ?
@downtheshedwithbyron
13 күн бұрын
Same process but will be different as its a alloytec
@natejohnstone9958
7 ай бұрын
Does that radiator flush work in a 2002 VY ?
@downtheshedwithbyron
7 ай бұрын
Should do mate its pretty much the same process with most flushs
@natejohnstone9958
7 ай бұрын
@@downtheshedwithbyron appreciate it
@MavroAltieri
Ай бұрын
He didn't say how he flushed out the overflow bottt
Пікірлер: 57