Clean build, detailed step by step guide, straight to the point, and no unnecessary jokes. thank you so much!
@Ladioz
2 жыл бұрын
Beautiful build, you never disappoint with the color themes!
@mcrazza
Жыл бұрын
26:24 Learnt something new there. I have an ASRock board too (B550M) and I didn't even know that I had to change the CPU_FAN2 from Fan to Water Pump. Here I was thinking my Cooler Master AiO was already working for the last couple weeks since I completed my build, and now I can hear the water moving (initially) and the tiny motor spinning. It's fully working now. Thanks for that. 👍 You got a new subscriber. Haven't noticed an improvement in temps. 5600G is still hovering around 41-41.5C in BIOS. No different than before. Running on silent profile. Only see half to one full degree reduction in temperature when the pump and AiO fans are spinning at maximum.
@spartangaming7223
Жыл бұрын
Brilliant video, easy to understand and straight to the point
@mcrazza
Жыл бұрын
Great comprehensive guide. My case, the Cooler Master NR400, shares the same chassis so there's not much different except for the fan/argb hub and removable top panel.
@Blafard666
2 жыл бұрын
For some reason it made me smile to see that you too have those littles cuts on your fingers that you get when you build PCs, becauses the edges are always so sharp XD Its not just me !
@TheTruth4313
Жыл бұрын
Thx for showing the built-in RGB modes! 👍
@leonardoesposito6907
2 жыл бұрын
Ty i like because you show how to setup bios
@alumnoprimero1
Жыл бұрын
I did not understand the connection to the usb 2.2 header at minute 11:01, where does it come from? If anyone knows please comment
@hi_its_jerry
Жыл бұрын
im also clueless about that part
@sxkzox8995
Жыл бұрын
yes i don't have it
@mykojeffersonjavier1188
6 ай бұрын
Its for the power supply, the powersupply used in the video has a digital screen that displays temps, so it must be connected via usb 2.0 to the motherboard in order to control the display. If you are using any other psu tho, u can skip that part
@tfnico
4 ай бұрын
@@mykojeffersonjavier1188 Thank you! I was following this build today and thought I was missing some cable.
@danisalera8208
2 жыл бұрын
Increíble estética! Tenés algún video de gestión de cables? Impecable trabajo.
@Bobibobski
6 ай бұрын
Hello, I have a questions. Start from 8:08 you put the ARGB and fan cable. Is it included in the case or we should buy ourselves? Thank you. I just bought TD300 mesh today and I am going to build it tomorrow.
@MarkoVuckovic32
2 жыл бұрын
How many fans can be connected to the hub? I'd like to use 3 120mm in the front, 1 in the back and 2 on top and control them all with the motherboard software so I am wondering if something like that would be possible in this case
@mvasiliev
7 ай бұрын
Hello!I bought new xg750 platinum.Installed in new PC? connected and it won't work - even no display, no rotation fan.What should I do or check? mike.
@octraine
Жыл бұрын
The system fans don't want to start 0 rpm on both need urgent help!
@is-3shchuka765
Жыл бұрын
Check if the fan controller is connected and the fan headers are connected aswell. If this doesn't help then look at the manuel
@grayhawk
2 жыл бұрын
👍 awesome build.
@nathanbryant9442
Жыл бұрын
was curious when it comes to connecting the fan hub does that go to the mother board with the cable that is labled optional , i built two builds and one burned up the fan header on startup.
@Dalva81
Жыл бұрын
My reset button resets the computer... 😢 How can I change the colour of the lights? Can you please help?
@lazy_monster_gamerz
Жыл бұрын
how to change to rainbow color in same time (not solid) ? mine rainbow cant appear in same time, your video show 4 or 5 color in same time, how ?
@burydudexxx
2 жыл бұрын
Graphics card link: sold out - any recommended alternatives ?
@ayoazeez6745
Жыл бұрын
Rtx 3050?
@chase_912boi9
6 ай бұрын
Mine didn’t start i don’t know what I did wrong?
@maxtissen2506
6 ай бұрын
Do i NEED the cable extensions?
@kaustubhx5452
2 жыл бұрын
I am planning to go for this case with the same b660m Motherboard but doubtful if my Asus 1060 3gb PCIe 3 will be connected to the main slot or need to put it in the 2nd slot below which is kinda not possible in the case. Can you help? Or should I go for Lian Li 215 white?
@ft.kwadal
10 ай бұрын
how do i change the rgb on the fans???
@VasuPatel2511
Жыл бұрын
Can i apply wifi card under graphics card (3060) in this cabinet?
@nandolcsouza
2 жыл бұрын
Thanks for the inspiration
@sharpvolt2669
2 жыл бұрын
why is the middle motherboard screw mount thing is longer than the sides pls help lol
@janivanpadlan2395
Жыл бұрын
I think the problem with this case is the future upgrades. I’m current gpu is rtx3080. If I want to uprade to 4080, I think i have to buy a new pc case cause 4080 ain’t gonna fit with this one. Thoughts?
@virexium6422
2 жыл бұрын
I have a question about this case...can i remove that reset plug from the hub and plug it into my motherboard instead? Im not gonna use the stock fans.
@Sofala
2 жыл бұрын
Yes you can. If you watch the video it is mentioned..
@matteova3973
2 жыл бұрын
The aio cooler is pushing air outside the case?
@MrCRTesla
Жыл бұрын
I have a problem with this case. I connected the front fans, but they do so much noise and are spinning very fast. Any way to fix this?
@cardona54321
Жыл бұрын
There is a section of this video where he sets the fan curves in the bios, that should be able to make them a bit quieter
@ginogkicz
2 жыл бұрын
Great work!
@calmvibes9392
Жыл бұрын
does anyone know how to control the two front fans that came with the case?
@Aryan.Kamboj.
Жыл бұрын
I'm looking for an answer too! Did you find anything?
@calmvibes9392
Жыл бұрын
@@Aryan.Kamboj. still searching my friend ☹️ would you say they're pretty loud? And my motheboard software doesn't recognize them either (Asus). Contemplating I just take it back to the PC place and pay them labor to do it.
@jorgedesantiago7957
Жыл бұрын
Thanks..
@MegaAbgt
Ай бұрын
Thanks for ssd sata and hdd prts. Oh wait
@boicungcamap4313
2 жыл бұрын
no sata SSD build?
@goheadcuz1618
2 жыл бұрын
With a 1tb m.2, why would you use a sata?
@boicungcamap4313
2 жыл бұрын
@@goheadcuz1618 well, i think it's a tutorial video, so no matter how much your M2 storage is. it shouldve have added the way to assemble the SSD sata.
Пікірлер: 47