Thanks so much for the great video. Clear, Concret and ilustrative great video. Greeting From BOLIVIA
@josepatriciogalianoaraujo401
7 жыл бұрын
realmente todo un genio, me saque la piedra de la cabeza de como hacer los tubos en fibra de vidrio, excelente video, te agradezco mucho por tu paciencia en indicarnos paso a paso el fabricar este tubo, muchas gracias
@borisbekker6264
4 жыл бұрын
Good job friend! Respect and good luck for you! 👌👌✊✊
@serryscs
5 ай бұрын
when covering it with plastic, does it become heavier? (i mean after peeling it off, the only thing changing is the finish becomes smooth but does that also increase weight?)
@alanosauras
10 жыл бұрын
I used E-bond Resin which is available only commercially but sold by B and B Yacht Designs. I don't necessarily believe that the type of resin I used contributed much to the finish. Another really good tool for removing air bubbles (which I did not use) is what we call an "air roller" www.briery.com/vortex/images/roller.jpg aluminum ribbed roller pretty cheap and reusable. Pops any and all bubbles.
@Reptile789
10 жыл бұрын
Was there air bubbles in that tube? I think what catches my attention most is the transparency. The resin I use from Aeropoxy is not that great with fiberglass. Majority if the time boat epoxies have air release attributes. Do you have a technical data sheet you can email me?
@gaddarhoyrat
8 жыл бұрын
thanks a lot for the video. Hi from Turkiye...
@xy_7
6 жыл бұрын
Puedes ayudarme, con que nombre busco la última capa que pones y presionas con la espátula? De Perú.
@alanosauras
9 жыл бұрын
I'm pretty sure it was polyethelene. Not sure what type cellotape is. I've had good success also with clear packing tape just don't use really cheap thin ones as they can break and become a mess. Cling wrap also does NOT work.
@KDD8
8 жыл бұрын
+Alan S Any other suggestions?
@TheThomastoulouse
5 жыл бұрын
Hi, we make a project at school. We are mechanics students and we need to know what type of plastic you used because we search a plastic which doesn't stick to the resin. Thank you for your answer.
@IvoHenrique1975
Жыл бұрын
I have a question to ask if you don't mind answering. The plastic you`ve used is a regular plastic or a special plastic to work with fiberglass?
@jameshicks7125
Жыл бұрын
It's regular plastic sheeting. LDPE (Low Density Polyethylene) Standard hardware store garden sheeting. Hardly anything will stick to LDPE or HDPE.
@JOEGGGJOE
7 жыл бұрын
that was really cool. so you used just regular plastic sheet?
@prasadronblack2007
9 жыл бұрын
The plastic you used is it a special plastic cause few months ago when i was trying it on a sellotape it didn't work. I hoped the epoxy wont stick as its plastic but it did.
@antoniorospujante3821
7 жыл бұрын
what type of plastic did you use? great job!
@jimmysrandomness
2 жыл бұрын
I guess some plastic that is used for painting the house (that you put on the ground 👍)
@musaadfelton3909
2 жыл бұрын
Hi there Sir. I know this video was posted 7 years ago. However do you think this could be scaled down to like 8mm rod. To make fibreglass archery arrows? My challenge would be to get 6mm stiff rod or pole that won't bend when applying the stuff
@alanosauras
2 жыл бұрын
Maybe but I wouldnt try when carbon arrow shafts are mass produced and very cheap. Much lighter and stronger.
@musaadfelton3909
2 жыл бұрын
@@alanosauras Thanks for your response. Here where I live in South Africa. Carbon arrows are expensive. The fibreglass arrows are actually cheaper here than the carbon arrows. So I thought maybe I could try making arrows with this concept.
@alanosauras
2 жыл бұрын
I think you'll need a different method to get the tube off the mandrel. I'd probably try using a steel rod polished and waxed. Maybe even slightly tapered. Just not sure how easy it will come off. I would also use uni fibers for most of it. I also would just order them. Heres some real cheap glass ones. Ya the carbon ones are a little expensive. m.alibaba.com/product/1600513949951/Fiberglass-Arrow-Shaft-Fiberglass-Hunting-Recurve.html?s=p
@musaadfelton3909
2 жыл бұрын
@@alanosauras Thanks Alan..appreciate the response..wow.the shafts are very affordable on alibaba. The only issue I have is the shipping costs. To me it's 102 dollars. That's R1500 in my currency lol. But I guess if I I ordering over 500 shafts then it would be worth it.
@kregerstainer
Жыл бұрын
Is it strong?can I use it as a speargun barrel?
@kanubhaipanchal4254
6 жыл бұрын
very usuaful video,i like.
@Reptile789
10 жыл бұрын
What resin was used for this tube? I like how you got a transparent finish and no sign of air bubbles.
@uet786
5 жыл бұрын
epoxy resin was used its mentioned in the video
@osamasharabosama6637
4 жыл бұрын
Can use it for drink water or it make water toxic?!
@xandolucena
4 жыл бұрын
Nice! Can this technique be used to make a carbon fiber mast?
@TheArchitect216
3 жыл бұрын
yes, but you are better off using mold release or PTFE rather then plastic and finishing with peel ply as it makes secondary bonding easier and makes the surface easier to sand.
@Yusuf_Kuss
Жыл бұрын
What is the name of the paper you used to separate the pattern?
@mitchelllewis4916
Жыл бұрын
Beautiful!!! Thanks so much. You saved me +$450
@MiNiD33
3 жыл бұрын
How did you add the sail track?
@fivemountains4281
6 жыл бұрын
Nice!
@vapaustuonelassa
2 жыл бұрын
Kieltämättä kätevää🤔mutta muovi materiaalista pitäisi päästä eroon !!! Ympäristön kannalta erittäin tuhoisaa koska se ei juurikaan hajoa luonnon kiertokulkuun !!! Miettikää nyt sitäkin että "kaikki" mitä on ihminen on muovista tehnyt, on vieläkin olemassa jossain... Suurin osa ei ole käytössä vaan kaatopaikoilla, järvissä, merissä, metsissä jne... Eläimet syö niitä ja kuolevat, eli ajanmittaan jää ihmisillekkin vain muovipullia syötäväksi Eli ajan mittaan hukumme muovikrääsään...
@alanosauras
2 жыл бұрын
I agree. The epoxy is also petroleum based and is probably unsustainable long term like all petroleum products. But I don't see it going away either. Hopefully we will learn to recycle it in a profitable way soon. On the plus side, building a boat and using it to experience nature is a good way to connect to the environment which will hopefully lead to wanting to protect it and take future actions that are less damaging like not using plastic bags, supporting recycling efforts, biking instead of driving, etc. I believe at this point that only advances in chemistry and technology will lessen the effects of what we've already done to the planet, humanity is not capable as a whole of stopping the use of non renewable resources, sadly todays society is too greedy.
@arimakinen3124
2 жыл бұрын
@@alanosauras Niin valitettavasti ihmiskunta on se mikä on... Jälkipolvillamme on karmea tulevaisuus edessä... So unfortunately humanity is what it is... Our descendants have a grim future ahead of them...
Пікірлер: 39