Terrific review. I really appreciate your calm, thorough and professional delivery. A breath of fresh air in the gun community. Thanks.
@TheRogueBanshee
9 ай бұрын
I appreciate the comment. Thanks for watching!
@FPS_Wingo
Жыл бұрын
Been getting a few more real avid tools for gunsmith and they’re starting to become my favorite tools in my shop
@MLZ1957
2 жыл бұрын
Absolutely the best investment that I have made for my gunsmithing.
@spamnelsonhere
7 ай бұрын
Wow, gotta be the best review and walk through of this avid vise
@TheRogueBanshee
6 ай бұрын
Glad you liked it. Thanks for watching!
@RTACDaughters
2 жыл бұрын
I can see hold useful this vice can be. Next time I need a new vise I will look into this.
@TheRogueBanshee
2 жыл бұрын
I am really liking it. There is one more vise that I want to get my hands on that will give this one a run for its money. But that will probably be late this year before I can save up for it.
@interrestrial9815
11 ай бұрын
You do very good reviews. Thanks.
@TheRogueBanshee
11 ай бұрын
Glad you like them!
@jimmyjohnson6232
Жыл бұрын
Great , now I want one
@michaelshanahan4965
2 жыл бұрын
Have this it’s the best.
@8ch6d
Жыл бұрын
I just received mine last Friday. Man I should've bought this a long time ago. Everything is so much easier now!
@TheRogueBanshee
Жыл бұрын
It is an amazing piece of equipment, isn't it?
@8ch6d
Жыл бұрын
@@TheRogueBanshee It absolutely is.
@rmurton130456
Жыл бұрын
Where can I buy this? I live in the UK
@8ch6d
Жыл бұрын
@@rmurton130456 I bought directly from their website.
@macman1138
Жыл бұрын
I will buy this for my shop. Thank you for posting!
@ghostspector3732
Жыл бұрын
Excellently done man. Appreciate your demonstration.
@TheRogueBanshee
Жыл бұрын
Glad it was helpful! Thanks for asking
@ericward9159
Жыл бұрын
I would like to see you install a barrel nut down to its max torque of 80 foot lbs with this. I'm skeptical about it's ruggedness.
@TheRogueBanshee
Жыл бұрын
The more I work with the vise the more I put it through its paces. A week ago I was torquing a 308 barrel extension to 150 ft lbs and it held (the vise is only rated to 100 ft lbs). I was supprised and sorry that I didn't film it. I think I bent the thread rod a little as it is tighter to turn but not too bad. I wouldn't recommend going over manufacturer specs but I just had to know if it would hold. Also, I was skeptical about the same thing when I first got it. Honnestly, I thought I would break it barreling up a rifle for the first time on this vise.
@ericward9159
Жыл бұрын
@@TheRogueBanshee I appreciate you responding so soon. I might get one now.
@rodneycooke6538
Жыл бұрын
I agree! Purchased Avid AR Master Armorer kit and highly disappointed in quality of punches. Attractive products but question their value in real world application. The master wrench is solid!
@fredhancz3097
2 жыл бұрын
Nice helpful video, thanks.
@TheRogueBanshee
2 жыл бұрын
Glad it was helpful!
@G23reviews
2 жыл бұрын
Definitely will have to get 1 of these when I get are new home
@TheRogueBanshee
2 жыл бұрын
It is cool... Right?
@DMFaas
2 жыл бұрын
Pretty cool vice.
@TheRogueBanshee
2 жыл бұрын
I like it!
@johnflannery4815
Жыл бұрын
You just sold me on this vise.
@TheRogueBanshee
Жыл бұрын
Hope you enjoy it. I love mine.
@benerdman7114
6 ай бұрын
Do ya think the pic rail slot in the vice would be a solid enough spot to clamp down on to torque a barrel on an upper by chance?
@TheRogueBanshee
2 ай бұрын
sorry, just saw your comment. I wouldn't attempt to use the pic rail slot for that. It might work, but there are better tools for that.
@jbaker001200
2 ай бұрын
What about the attachment points for mounting the vice? It looks weak compared to you typical 4 bolt design. How thick are those screws? Or are they bolts? Im planning on mounting this through about 2-2.5in of butcher block and cabinet top
@TheRogueBanshee
2 ай бұрын
Really good questions. I had my concerns about it too before I started working with it. After all my 4 1/2 inch bench vise uses much thicker bolts. I had this mounted to a bench with a 1 inch thick top (it was actually a dining room table top) using the bolts that they give you, (they are bolts) and was quite concerned about the same thing. I barreled a bunch of ARs when it was on that top and had no problems. I also pulled and yanked on it and it lasted. I was pleasantly surprised that it worked as well as it did. I clamp now because I built that butcher block myself and just cannot bear to drill a hole into it. Plus I can pull it off quickly to have added bench space. The block that I have it mounted on now is 2 1/8 inch thick with the bottom mortised out so that it fits flush on the bench and to accommodate the 2 inch carriage bolts that came with it. You can always get longer ones at the hardware store.
@williamleiby3150
Жыл бұрын
I just ordered one fron psa for $229
@karp4262
2 жыл бұрын
You should do a review on the one from Total Vise.
@TheRogueBanshee
2 жыл бұрын
Saving up for one. They are made just a few hours from my house.
@karp4262
2 жыл бұрын
No way that's crazy. Well I look forward to hearing what you think.
@TheRogueBanshee
2 жыл бұрын
@@karp4262 Yea. I was going to go down there and record a podcast episode with Jeff at Total Vise back in April but for some reason we couldn't sync our schedules. He works like all the time. I will have to try again. I have another bench that I am building in the studio and I really want to run his system on that bench.
@vernievuitton
Жыл бұрын
Im preparing to mount a vise to my bench, do I want to place a sheet of wood down first before mounting it like you did? Is that so you don't leave an imprint on the bench? thanks!
@TheRogueBanshee
Жыл бұрын
I have it mounted with C Clamps so that I can move it around on the bench. That is why it is mounted on a block of wood. I used to have it direct mounted on another bench and decided I needed modularity on the new bench.
@ggreenwood3310
8 ай бұрын
Look at the inline fabrication quick change mount and storage dock. Saves bench space and you can lock anything down to your bench.
@daltonwinchenbach7982
2 жыл бұрын
@theroguebanshee Where did you get that barrel nut tool kit?
@TheRogueBanshee
2 жыл бұрын
That is the Real Avid Armorers Master Kit Pro. You can see that in action on a couple of videos in the past few months. Namely the freefloat video kzitem.info/news/bejne/pIJjyZ-JfJuSqoo or the Master Armerors kit pro video kzitem.info/news/bejne/2ZVrvaxnqaqTp20 It is pretty slick. If you don't want to buy the full kit, they sell just the Crow Foot set as well. About 5 days ago I negotiated a discount code for their website. RARB22 will give you 10% off.
@touaxyooj159
Жыл бұрын
How much is the vise???
@TheRogueBanshee
Жыл бұрын
a quick google search will tell you that information.
Пікірлер: 48